Katsunobu Nishihara
Research Subjects
Research Interests
Katsunobu Nishihara has a total of 195 co-authors. Here are the top co-authors by number of shared publications:
- Atsushi Sunahara
Blue Laser Fusion, Inc
17 shared publications - Shinsuke Fujioka
Osaka University
13 shared publications Hiroaki Nishimura
Osaka University 1 Institute of Laser Engineering 2-6 Yamada-oka, Suita, Osaka 565-0871, Japan
9 shared publicationsHiroyuki Furukawa
Institute for Laser Technology (Japan)
9 shared publications- Masakatsu Murakami
The University of Osaka
7 shared publications Yasukazu Izawa
Osaka University 1 Institute of Laser Engineering 2-6 Yamada-oka, Suita, Osaka 565-0871, Japan
7 shared publications
Latest Publications
- 8 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (15)
Absolute density measurement of hydrogen radicals in XUV induced plasma for tin contamination cleaning via laser-induced fluorescence
Effective cleaning of tin contamination on the collecting mirrors in extreme ultraviolet source is one of the key techniques to improve throughput and cost performance of extreme ultraviolet lithography. Hydrogen radicals produced in hydrogen plasma that is induced by wideband extreme ultraviolet radiation are expected to be utilized for in situ tin contamination cleaning in extreme ultraviolet sources. In this Letter, we clarified absolute density and cleaning ability of the hydrogen radicals produced by intense extreme ultraviolet pulse through ground state population density measurement by laser-induced fluorescence technique. The experimentally obtained radical parameters coincided well with simulation results and collisional radiative model. It was found that the extreme ultraviolet induced plasma was in quasi-steady state with abundant amount of hydrogen radicals in ground state. Further, it was found that the in situ tin contamination cleaning in extreme ultraviolet lithography source would become more practical with increase in operational parameters, such as extreme ultraviolet emission intensity, gas pressure, and radical production cross section.
- 8 April 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (15)
Absolute density measurement of hydrogen radicals in XUV induced plasma for tin contamination cleaning via laser-induced fluorescence
Effective cleaning of tin contamination on the collecting mirrors in extreme ultraviolet source is one of the key techniques to improve throughput and cost performance of extreme ultraviolet lithography. Hydrogen radicals produced in hydrogen plasma that is induced by wideband extreme ultraviolet radiation are expected to be utilized for in situ tin contamination cleaning in extreme ultraviolet sources. In this Letter, we clarified absolute density and cleaning ability of the hydrogen radicals produced by intense extreme ultraviolet pulse through ground state population density measurement by laser-induced fluorescence technique. The experimentally obtained radical parameters coincided well with simulation results and collisional radiative model. It was found that the extreme ultraviolet induced plasma was in quasi-steady state with abundant amount of hydrogen radicals in ground state. Further, it was found that the in situ tin contamination cleaning in extreme ultraviolet lithography source would become more practical with increase in operational parameters, such as extreme ultraviolet emission intensity, gas pressure, and radical production cross section.
- 1 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (1)
Efficient photo-dissociation-induced production of hydrogen radicals using vacuum ultraviolet light from a laser-produced plasma
One of the critical issues in lithography using extreme ultraviolet (EUV) light is tin contamination of the EUV collector mirrors in the tin-based LPP-EUV light source. The contamination can be removed by the reaction of tin atoms with hydrogen radicals producing stannane (SnH4), which is gaseous at the normal temperature. Hydrogen radicals can be produced from hydrogen molecules through photo-dissociation and photo-ionization induced by broadband radiation emitted from the EUV light source. In this work, an efficient production of hydrogen radical using vacuum ultraviolet (VUV) light emitted from laser-produced high-Z plasma is experimentally demonstrated. A two-dimensional radiation hydrodynamic simulation, coupled with photoionization and photo-dissociation cross sections, also shows the efficient hydrogen radical production by increased VUV light emission, as observed in the experiment.
- 1 January 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 124 (1)
Efficient photo-dissociation-induced production of hydrogen radicals using vacuum ultraviolet light from a laser-produced plasma
One of the critical issues in lithography using extreme ultraviolet (EUV) light is tin contamination of the EUV collector mirrors in the tin-based LPP-EUV light source. The contamination can be removed by the reaction of tin atoms with hydrogen radicals producing stannane (SnH4), which is gaseous at the normal temperature. Hydrogen radicals can be produced from hydrogen molecules through photo-dissociation and photo-ionization induced by broadband radiation emitted from the EUV light source. In this work, an efficient production of hydrogen radical using vacuum ultraviolet (VUV) light emitted from laser-produced high-Z plasma is experimentally demonstrated. A two-dimensional radiation hydrodynamic simulation, coupled with photoionization and photo-dissociation cross sections, also shows the efficient hydrogen radical production by increased VUV light emission, as observed in the experiment.
- Open Access
- 13 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (20)
Joint measurement of electron density, temperature, and emission spectrum of Nd:YAG laser-produced tin plasma
We present the results of joint measurements of electron density (ne), temperature (Te), and emission spectra of an Nd:YAG-driven tin plasma. Collective Thomson scattering provides space- and time-resolved ne and Te data during drive laser irradiation, and extreme ultraviolet (EUV) emission spectra, which is space-resolved in the target normal, are measured using a flat-field grazing incidence spectrometer (GIS). As the distance from the target increased, the emission intensity quickly decreases, and the peaks of the spectra gradually shift to longer wavelengths. This can be explained by the rapid decrease in ne, and thus, self-absorption, with an increase in distance. We obtain the EUV spectra by calculating the transfer of photons along the line-of-sight of the GIS, using theoretical emissivity and opacity, and applying the measured spatial distribution of ne and Te. The results quantitatively demonstrate that the self-absorption effect is significant; the emission from the core regions is mostly reabsorbed by the surrounding plasma. The calculated spectra are compared with the measured spectra. While good agreement is achieved in the spectral region of 13.3 and 15.3 nm, considerable differences are found in the 12.5–13 and 15.5–17.5 nm region. The results demonstrate the significance of this joint measurement for further validation of the atomic process model considering self-absorption effect, which is critical for the future high-density, solid laser-driven EUV source.
- 13 November 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (20)
Open AccessJoint measurement of electron density, temperature, and emission spectrum of Nd:YAG laser-produced tin plasma
We present the results of joint measurements of electron density (ne), temperature (Te), and emission spectra of an Nd:YAG-driven tin plasma. Collective Thomson scattering provides space- and time-resolved ne and Te data during drive laser irradiation, and extreme ultraviolet (EUV) emission spectra, which is space-resolved in the target normal, are measured using a flat-field grazing incidence spectrometer (GIS). As the distance from the target increased, the emission intensity quickly decreases, and the peaks of the spectra gradually shift to longer wavelengths. This can be explained by the rapid decrease in ne, and thus, self-absorption, with an increase in distance. We obtain the EUV spectra by calculating the transfer of photons along the line-of-sight of the GIS, using theoretical emissivity and opacity, and applying the measured spatial distribution of ne and Te. The results quantitatively demonstrate that the self-absorption effect is significant; the emission from the core regions is mostly reabsorbed by the surrounding plasma. The calculated spectra are compared with the measured spectra. While good agreement is achieved in the spectral region of 13.3 and 15.3 nm, considerable differences are found in the 12.5–13 and 15.5–17.5 nm region. The results demonstrate the significance of this joint measurement for further validation of the atomic process model considering self-absorption effect, which is critical for the future high-density, solid laser-driven EUV source.
- Open Access
- 1 June 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (6)
Nonlinear interaction of two non-uniform vortex sheets and large vorticity amplification in Richtmyer–Meshkov instability
Vortex dynamics is an important research subject for geophysics, astrophysics, engineering, and plasma physics. Regarding vortex interactions, only limited problems, such as point vortex interactions, have been studied. Here, the nonlinear interaction of two non-uniform vortex sheets with density stratification is investigated using the vortex sheet model. These non-uniform vortex sheets appear, for example, in the Richtmyer–Meshkov instability that occurs when a shock wave crosses a layer with two corrugated interfaces. When a strong vortex sheet approaches a weaker vortex sheet with opposite-signed vorticity, a locally peaked secondary vorticity is induced on the latter sheet. This emerging secondary vorticity results in a remarkable vorticity amplification on the stronger sheet, and a strong vortex core is formed involving the weak vortex sheet. The amplified vortices with opposite signs on the two vortex sheets form pseudo-vortex pairs, which cause an intense rolling-up of the two sheets. We also investigated the dependence of distance and initial phase difference of vorticity perturbations between two vortex sheets on the vorticity amplification and vortex sheet dynamics.
- 1 June 2023
- Published by AIP Publishing in Physics of Plasmas
- Vol. 30 (6)
Open AccessNonlinear interaction of two non-uniform vortex sheets and large vorticity amplification in Richtmyer–Meshkov instability
Vortex dynamics is an important research subject for geophysics, astrophysics, engineering, and plasma physics. Regarding vortex interactions, only limited problems, such as point vortex interactions, have been studied. Here, the nonlinear interaction of two non-uniform vortex sheets with density stratification is investigated using the vortex sheet model. These non-uniform vortex sheets appear, for example, in the Richtmyer–Meshkov instability that occurs when a shock wave crosses a layer with two corrugated interfaces. When a strong vortex sheet approaches a weaker vortex sheet with opposite-signed vorticity, a locally peaked secondary vorticity is induced on the latter sheet. This emerging secondary vorticity results in a remarkable vorticity amplification on the stronger sheet, and a strong vortex core is formed involving the weak vortex sheet. The amplified vortices with opposite signs on the two vortex sheets form pseudo-vortex pairs, which cause an intense rolling-up of the two sheets. We also investigated the dependence of distance and initial phase difference of vorticity perturbations between two vortex sheets on the vorticity amplification and vortex sheet dynamics.
- Open Access
High-Quality Laser-Accelerated Ion Beams from Structured Targets
In this work, we reviewed our results on the prospect of increasing the quality of ion acceleration driven by high-intensity laser pulses using low-Z structured targets. It is shown that the radiation pressure acceleration mechanism dominates over target normal sheath acceleration for assumed laser target parameters when the laser intensity is high enough. The target thickness is optimized for this regime and double-layer structure is investigated. When a corrugation is fabricated on the interface of such a target, a relativistic instability with Rayleigh–Taylor and Richtmyer–Meshkov like features can be driven by the target interaction with a high intensity laser pulse. The proper development of this instability leads to the generation of a collimated quasi-monoenergetic ion beam with lower emittance, divergence, and energy spread compared to a single and double-layer target with planar interface. A steep-front laser pulse is used in our simulations to mitigate other type of instabilities arising at the target surface from the laser–target interaction. We discuss the use of a plasma shutter to generate the required pulse profile, which also locally increases intensity. The obtained shape improves the ion acceleration, including higher maximal energy and lower beam divergence, in our simulation of a high-Z target.
Open AccessHigh-Quality Laser-Accelerated Ion Beams from Structured Targets
In this work, we reviewed our results on the prospect of increasing the quality of ion acceleration driven by high-intensity laser pulses using low-Z structured targets. It is shown that the radiation pressure acceleration mechanism dominates over target normal sheath acceleration for assumed laser target parameters when the laser intensity is high enough. The target thickness is optimized for this regime and double-layer structure is investigated. When a corrugation is fabricated on the interface of such a target, a relativistic instability with Rayleigh–Taylor and Richtmyer–Meshkov like features can be driven by the target interaction with a high intensity laser pulse. The proper development of this instability leads to the generation of a collimated quasi-monoenergetic ion beam with lower emittance, divergence, and energy spread compared to a single and double-layer target with planar interface. A steep-front laser pulse is used in our simulations to mitigate other type of instabilities arising at the target surface from the laser–target interaction. We discuss the use of a plasma shutter to generate the required pulse profile, which also locally increases intensity. The obtained shape improves the ion acceleration, including higher maximal energy and lower beam divergence, in our simulation of a high-Z target.
- 8 December 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (2) , 025201
Investigation of dynamics of laser-produced carbon plasma during the laser irradiation using collective Thomson scattering
Plasma temperature, density, and flow velocity are the critical physical properties of laser produced plasma (LPP) to reveal the ablation dynamics, energy transport, and hydrodynamic evolution. In the time window during and just after laser irradiation, experimental data are very scarce so that many theoretical models remain untested. Here we report a clear evolution history of LPP expansion dynamics within 0–14 ns after the laser peak and in a region very close to the target (0.13–0.6 mm). A table-top Nd:YAG laser (intensity 6 × 109 W cm−2, pulse 7 ns) was used to generate the LPP from a planar graphite target, whose width was arranged to be smaller than the laser spot diameter to produce a one-dimensional planar expansion plasma near the target. The electron density ( n e ), temperature ( T e ), and drift velocity ( V d ) in the LPPs were measured using the ion feature of collective Thomson scattering, providing a space- and time-resolved 2D profile of the LPP. The experimental observations made it possible for the expansion dynamics to be compared directly with the LPP expansion models. The results suggest that during the laser pulse, the LPP is approximately isothermal and expands predominantly one-dimensionally in the target normal direction, in which the LPP drift velocity is found to increase linearly with distance. The linear extrapolation of the velocity indicates that the LPP has a considerable velocity at the initial target surface; this velocity is approximately the speed of sound derived from the observed T e . The experimental results were found to be in moderate agreement with the 1D self-similar isothermal expansion model. The ratio of the internal to kinetic energy in the observed area was ∼0.6, as predicted by the isothermal expansion model. The experimental findings were compared with the results of the 2D hybrid code STAR, and good agreement was obtained.
- 8 December 2022
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 56 (2) , 025201
Investigation of dynamics of laser-produced carbon plasma during the laser irradiation using collective Thomson scattering
Plasma temperature, density, and flow velocity are the critical physical properties of laser produced plasma (LPP) to reveal the ablation dynamics, energy transport, and hydrodynamic evolution. In the time window during and just after laser irradiation, experimental data are very scarce so that many theoretical models remain untested. Here we report a clear evolution history of LPP expansion dynamics within 0–14 ns after the laser peak and in a region very close to the target (0.13–0.6 mm). A table-top Nd:YAG laser (intensity 6 × 109 W cm−2, pulse 7 ns) was used to generate the LPP from a planar graphite target, whose width was arranged to be smaller than the laser spot diameter to produce a one-dimensional planar expansion plasma near the target. The electron density ( n e ), temperature ( T e ), and drift velocity ( V d ) in the LPPs were measured using the ion feature of collective Thomson scattering, providing a space- and time-resolved 2D profile of the LPP. The experimental observations made it possible for the expansion dynamics to be compared directly with the LPP expansion models. The results suggest that during the laser pulse, the LPP is approximately isothermal and expands predominantly one-dimensionally in the target normal direction, in which the LPP drift velocity is found to increase linearly with distance. The linear extrapolation of the velocity indicates that the LPP has a considerable velocity at the initial target surface; this velocity is approximately the speed of sound derived from the observed T e . The experimental results were found to be in moderate agreement with the 1D self-similar isothermal expansion model. The ratio of the internal to kinetic energy in the observed area was ∼0.6, as predicted by the isothermal expansion model. The experimental findings were compared with the results of the 2D hybrid code STAR, and good agreement was obtained.
- 16 February 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (3) , 036002
Time-resolved measurement of radical populations in extreme-ultraviolet-light-induced hydrogen plasma
We have investigated hydrogen plasma induced by intense extreme ultraviolet (EUV) radiation by measuring the plasma parameters and population density of radicals, which is expected to clean the tin contamination on the optics in EUV sources, using a time-resolved optical emission spectroscopy. The obtained electron density was n e = (2 ± 0.4) × 1013 cm−3, and the electron temperature was T e = 1 ± 0.2 eV. The electron density was five orders of magnitude higher than that of previous study. The radical population density determined by the experiment was consistent with that calculated with a collisional radiative model, showing excitation and recombination are dominant production processes.
- 16 February 2022
- Published by IOP Publishing in Applied Physics Express
- Vol. 15 (3) , 036002
Time-resolved measurement of radical populations in extreme-ultraviolet-light-induced hydrogen plasma
We have investigated hydrogen plasma induced by intense extreme ultraviolet (EUV) radiation by measuring the plasma parameters and population density of radicals, which is expected to clean the tin contamination on the optics in EUV sources, using a time-resolved optical emission spectroscopy. The obtained electron density was n e = (2 ± 0.4) × 1013 cm−3, and the electron temperature was T e = 1 ± 0.2 eV. The electron density was five orders of magnitude higher than that of previous study. The radical population density determined by the experiment was consistent with that calculated with a collisional radiative model, showing excitation and recombination are dominant production processes.
- 1 November 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (11) , 112301
Linear and nonlinear interactions between an interface and bulk vortices in Richtmyer–Meshkov instability
When a planar shock hits a corrugated interface between two fluids, the Richtmyer–Meshkov instability (RMI) occurs. Vortices are generated in bulk behind the transmitted and reflected shocks in RMI. As the shock intensity becomes larger, the stronger bulk vortices are created. The nonlinear evolution of RMI is investigated within the vortex sheet model (VSM), taking the nonlinear interaction between the interface and the vortices into account. The fluid becomes incompressible as the shocks move away from the interface, and VSM can then be applied. The vorticity and position of the bulk vortices obtained from the compressible linear theory [F. Cobos-Campos and J. G. Wouchuk, Phys. Rev. E93, 053111 (2016)] are applied as initial conditions of the bulk point vortices in VSM. The suppression of RMI due to the bulk vortices is observed in the region such that the corrugation amplitude is less than one-tenth of the wavelength, and the reduction of the growth is quantitatively evaluated and compared with the compressible linear theory. In the nonlinear stage, the interaction between the interface and the bulk vortices strongly affects the interfacial shape and the dynamics of bulk vortices, e.g., the creation of a vortex pair is observed. Strong bulk vortices behind the transmitted shock enhance the growth of spike, supplying flow from spike root to its top and mushroom umbrella in the fully nonlinear stage.
- 1 November 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (11) , 112301
Linear and nonlinear interactions between an interface and bulk vortices in Richtmyer–Meshkov instability
When a planar shock hits a corrugated interface between two fluids, the Richtmyer–Meshkov instability (RMI) occurs. Vortices are generated in bulk behind the transmitted and reflected shocks in RMI. As the shock intensity becomes larger, the stronger bulk vortices are created. The nonlinear evolution of RMI is investigated within the vortex sheet model (VSM), taking the nonlinear interaction between the interface and the vortices into account. The fluid becomes incompressible as the shocks move away from the interface, and VSM can then be applied. The vorticity and position of the bulk vortices obtained from the compressible linear theory [F. Cobos-Campos and J. G. Wouchuk, Phys. Rev. E93, 053111 (2016)] are applied as initial conditions of the bulk point vortices in VSM. The suppression of RMI due to the bulk vortices is observed in the region such that the corrugation amplitude is less than one-tenth of the wavelength, and the reduction of the growth is quantitatively evaluated and compared with the compressible linear theory. In the nonlinear stage, the interaction between the interface and the bulk vortices strongly affects the interfacial shape and the dynamics of bulk vortices, e.g., the creation of a vortex pair is observed. Strong bulk vortices behind the transmitted shock enhance the growth of spike, supplying flow from spike root to its top and mushroom umbrella in the fully nonlinear stage.
- Open Access
- 1 May 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (5) , 052305
Nonlinear interaction between bulk point vortices and an unstable interface with nonuniform velocity shear such as Richtmyer–Meshkov instability
The nonlinear interaction between bulk point vortices and a vortex sheet with initially nonuniform velocity shear is investigated theoretically and numerically by use of the vortex method, taking the incompressible Richtmyer–Meshkov instability as an example. As the point vortices approach the interface, i.e., a nonuniform vortex sheet, they increase the local sheet strength of the vortex sheet, which causes different types of interface deformation depending on the sign of their circulation of point vortices. For example, when the circulation of a point vortex is the opposite sign of the local sheet strength, it induces a new type of vortex pair with an local enhanced sheet vortex. We refer to that as a pseudo-vortex pair in the current study. The pseudo-vortex pair creates a local satellite mushroom at the fully nonlinear stage. The obtained results indicate that the complexity of the interface structure is enhanced if the bulk vortices exist.
- 1 May 2020
- Published by AIP Publishing in Physics of Plasmas
- Vol. 27 (5) , 052305
Open AccessNonlinear interaction between bulk point vortices and an unstable interface with nonuniform velocity shear such as Richtmyer–Meshkov instability
The nonlinear interaction between bulk point vortices and a vortex sheet with initially nonuniform velocity shear is investigated theoretically and numerically by use of the vortex method, taking the incompressible Richtmyer–Meshkov instability as an example. As the point vortices approach the interface, i.e., a nonuniform vortex sheet, they increase the local sheet strength of the vortex sheet, which causes different types of interface deformation depending on the sign of their circulation of point vortices. For example, when the circulation of a point vortex is the opposite sign of the local sheet strength, it induces a new type of vortex pair with an local enhanced sheet vortex. We refer to that as a pseudo-vortex pair in the current study. The pseudo-vortex pair creates a local satellite mushroom at the fully nonlinear stage. The obtained results indicate that the complexity of the interface structure is enhanced if the bulk vortices exist.
- 1 April 2019
- Published by Elsevier in High Energy Density Physics
- Vol. 31, 19-23
Nonlinear interfacial motion in magnetohydrodynamic flows
- 1 April 2019
- Published by Elsevier in High Energy Density Physics
- Vol. 31, 19-23
Nonlinear interfacial motion in magnetohydrodynamic flows