Rachid Méchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rachid Méchi has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Habib Farhat
Laboratory for the Studies of Ionized & Reactive Media (EMIR), University of Monastir
5 shared publications - Kamel Guedri
Mechanical Engineering Department, College of Engineering and Architecture, Umm Al-Qura University, Makkah, Saudi Arabia
2 shared publications - Kamel Halouani
Laboratory of Systems Integration and Emerging Energies (LR21ES14), National Engineering School of Sfax (ENIS), University of Sfax, IPEIS, Road Menzel Chaker km 0.5, P.O. Box 1172, Sfax 3018, Tunisia
2 shared publications Rachid Saïd
2 shared publicationsBorjini Mohamed Naceur
1 shared publicationHabib Farhat
University of Monastir Institute of Preparatory Studies in Engineering of Monastir: Universite de Monastir Institut Preparatoire aux Etudes d'Ingenieur de Monastir
1 shared publication
Latest Publications
- Open Access
- 29 May 2026
- Published by Springer Nature in Research Square
Investigation of Particle Shrinkage, Char Heat Capacity, and Anisotropic Transport Effects on the Pyrolysis of Thermally Thick Wood Spheres
Accurate prediction of temperature evolution and product yields during the pyrolysis of thermally thick biomass particles remains a significant challenge for reactor design and process optimization. This study examines the coupled influence of particle shrinkage and char heat capacity correlations on mass loss, product yields, and intraparticle temperature in wood spheres. A transient two-dimensional model is developed for a 25.4 mm diameter particle exposed to a constant reactor wall temperature of 736 K. The model combines an intermediate solid kinetic scheme, Darcy type volatile transport, conversion dependent properties, and anisotropic thermal conductivity and permeability based on literature data. Three char heat capacity correlations are implemented and assessed against experimental center temperature profiles and final char yields. Among them, a linear correlation provided the closest overall agreement, accurately reproducing both the endothermic plateau and the peak temperature. The best agreement with experiments is obtained for a radial shrinkage factor of 10%. Increasing shrinkage shifts the temperature peak to earlier times and progressively shortens the plateau period, which disappears for shrinkage levels above 30%. In addition, neglecting anisotropic transport properties leads to unrealistically rapid internal heating. The results demonstrate that reliable pyrolysis modeling of large biomass particles requires consistent treatment of thermophysical properties together with structural evolution effects.
- 29 May 2026
- Published by Springer Nature in Research Square
Open AccessInvestigation of Particle Shrinkage, Char Heat Capacity, and Anisotropic Transport Effects on the Pyrolysis of Thermally Thick Wood Spheres
Accurate prediction of temperature evolution and product yields during the pyrolysis of thermally thick biomass particles remains a significant challenge for reactor design and process optimization. This study examines the coupled influence of particle shrinkage and char heat capacity correlations on mass loss, product yields, and intraparticle temperature in wood spheres. A transient two-dimensional model is developed for a 25.4 mm diameter particle exposed to a constant reactor wall temperature of 736 K. The model combines an intermediate solid kinetic scheme, Darcy type volatile transport, conversion dependent properties, and anisotropic thermal conductivity and permeability based on literature data. Three char heat capacity correlations are implemented and assessed against experimental center temperature profiles and final char yields. Among them, a linear correlation provided the closest overall agreement, accurately reproducing both the endothermic plateau and the peak temperature. The best agreement with experiments is obtained for a radial shrinkage factor of 10%. Increasing shrinkage shifts the temperature peak to earlier times and progressively shortens the plateau period, which disappears for shrinkage levels above 30%. In addition, neglecting anisotropic transport properties leads to unrealistically rapid internal heating. The results demonstrate that reliable pyrolysis modeling of large biomass particles requires consistent treatment of thermophysical properties together with structural evolution effects.
- 1 March 2016
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 40 (5-6) , 4044-4056
New optical exchange gap concept to calculate self-irradiance direct exchange areas in cylindrical industrial furnaces
- 1 March 2016
- Published by Elsevier in Applied Mathematical Modelling
- Vol. 40 (5-6) , 4044-4056
New optical exchange gap concept to calculate self-irradiance direct exchange areas in cylindrical industrial furnaces
- Open Access
- 26 January 2016
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 676 (1) , 012016
Radiative modelling by the zonal method and WSGG model in inhomogeneous axisymmetric cylindrical enclosure
Nongray radiation calculations are carried out for a case problem available in the literature. The problem is a non-isothermal and inhomogeneous CO2-H2O- N2 gas mixture confined within an axisymmetric cylindrical furnace. The numerical procedure is based on the zonal method associated with the weighted sum of gray gases (WSGG) model. The effect of the wall emissivity on the heat flux losses is discussed. It is shown that this property affects strongly the furnace efficiency and that the most important heat fluxes are those leaving through the circumferential boundary. The numerical procedure adopted in this work is found to be effective and may be relied on to simulate coupled turbulent combustion-radiation in fired furnaces.
- 26 January 2016
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 676 (1) , 012016
Open AccessRadiative modelling by the zonal method and WSGG model in inhomogeneous axisymmetric cylindrical enclosure
Nongray radiation calculations are carried out for a case problem available in the literature. The problem is a non-isothermal and inhomogeneous CO2-H2O- N2 gas mixture confined within an axisymmetric cylindrical furnace. The numerical procedure is based on the zonal method associated with the weighted sum of gray gases (WSGG) model. The effect of the wall emissivity on the heat flux losses is discussed. It is shown that this property affects strongly the furnace efficiency and that the most important heat fluxes are those leaving through the circumferential boundary. The numerical procedure adopted in this work is found to be effective and may be relied on to simulate coupled turbulent combustion-radiation in fired furnaces.
- 31 December 2006
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 45 (12) , 1127-1139
Comparison between Kim, Wiscombe and least squares scattering phase function renormalization methods
- 31 December 2006
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 45 (12) , 1127-1139
Comparison between Kim, Wiscombe and least squares scattering phase function renormalization methods
- 1 April 2006
- Published by Elsevier in Journal of Quantitative Spectroscopy and Radiative Transfer
- Vol. 98 (3) , 425-445
Formulation and testing of the FTn finite volume method for radiation in 3-D complex inhomogeneous participating media
- 1 April 2006
- Published by Elsevier in Journal of Quantitative Spectroscopy and Radiative Transfer
- Vol. 98 (3) , 425-445
Formulation and testing of the FTn finite volume method for radiation in 3-D complex inhomogeneous participating media
- 31 July 2004
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 43 (7) , 697-708
Modélisation des transferts radiatifs dans un incinérateur des émissions polluantes de la pyrolyse du bois
- 31 July 2004
- Published by Elsevier in International Journal of Thermal Sciences
- Vol. 43 (7) , 697-708
Modélisation des transferts radiatifs dans un incinérateur des émissions polluantes de la pyrolyse du bois