Amod S. Dhakal
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Amod S. Dhakal has a total of 1 co-authors. Here are the top co-authors by number of shared publications:
Roy C. Sidle
Slope Conservation Section, Geohazards Division, Disaster Prevention Research Institute, Kyoto University, Gokasho, Uji, Kyoto 611-0011, Japan
3 shared publications
Latest Publications
- 20 February 2004
- Published by Wiley in Hydrological Processes
- Vol. 18 (4) , 757-776
Distributed simulations of landslides for different rainfall conditions
A physically based distributed slope stability model is described that utilizes a combined surface–subsurface kinematic wave module to assess groundwater fluctuations related to slope stability. A total of 82 major rainstorms from 1972 to 1990 in Carnation Creek, British Columbia, were examined to determine the influence of different characteristics of rainstorms (such as mean and maximum hourly intensity, duration, and rainfall amount) on the slope stability. These rainstorms vary in mean intensity from 1·6 to 11·2 mm h−1, storm duration from 11 to 93 h, and maximum hourly intensity from 3·4 to 35 mm h−1. Four synthetic ‘uniform intensity’ rainstorms were also tested against real storms to assess the effect of short‐term hourly rainfall intensity peaks on landslide occurrence. Altogether, 602 simulations were conducted. The combined influence of mean and maximum hourly intensity, duration, and total rainfall amount of rainstorms were important in generating landslides. The temporal distribution of short‐term intensity also influenced the landslide occurrence. When saturated hydraulic conductivity of the soil was lowered or soil depth was raised, most rainstorms produced larger numbers of landslides. For the most part, actual rainstorms produced less stable conditions than their synthetic ‘uniform intensity’ counterparts. For all landslide‐producing storms, slope failure usually occurred after some threshold of cumulative rainfall and maximum hourly rainfall intensity. These simulations provide insights into the distributed behaviour of landslide occurrence during large rainstorms with varying characteristics. Copyright © 2004 John Wiley & Sons, Ltd.
- 20 February 2004
- Published by Wiley in Hydrological Processes
- Vol. 18 (4) , 757-776
Distributed simulations of landslides for different rainfall conditions
A physically based distributed slope stability model is described that utilizes a combined surface–subsurface kinematic wave module to assess groundwater fluctuations related to slope stability. A total of 82 major rainstorms from 1972 to 1990 in Carnation Creek, British Columbia, were examined to determine the influence of different characteristics of rainstorms (such as mean and maximum hourly intensity, duration, and rainfall amount) on the slope stability. These rainstorms vary in mean intensity from 1·6 to 11·2 mm h−1, storm duration from 11 to 93 h, and maximum hourly intensity from 3·4 to 35 mm h−1. Four synthetic ‘uniform intensity’ rainstorms were also tested against real storms to assess the effect of short‐term hourly rainfall intensity peaks on landslide occurrence. Altogether, 602 simulations were conducted. The combined influence of mean and maximum hourly intensity, duration, and total rainfall amount of rainstorms were important in generating landslides. The temporal distribution of short‐term intensity also influenced the landslide occurrence. When saturated hydraulic conductivity of the soil was lowered or soil depth was raised, most rainstorms produced larger numbers of landslides. For the most part, actual rainstorms produced less stable conditions than their synthetic ‘uniform intensity’ counterparts. For all landslide‐producing storms, slope failure usually occurred after some threshold of cumulative rainfall and maximum hourly rainfall intensity. These simulations provide insights into the distributed behaviour of landslide occurrence during large rainstorms with varying characteristics. Copyright © 2004 John Wiley & Sons, Ltd.
- 18 February 2004
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 40 (2)
Pore water pressure assessment in a forest watershed: Simulations and distributed field measurements related to forest practices
A distributed shallow groundwater model related to slope stability is described to assess the spatial distribution of pore water pressure in steep forested terrain in British Columbia. Additionally, effects of timber harvesting and roads on measured changes in pressure head during rainstorms were evaluated for the first time to assess the need for incorporating different hydrological components in the event‐driven distributed model. Although explicit spatial quantification of pore water pressure requires many measurements for accurate prediction, model performance using average parameter values was reasonable when compared with pressure heads measured at nine spatially distributed sites. Increases in maximum pressure head (varying from 9 to 28 cm) between preharvesting (after road construction) and postharvesting rainstorm events were observed in seven of nine sites. The remaining two sites showed either a small decrease (≈5 cm) or similar peak pressure heads following harvesting. Peak pressure head evaluated at one piezometer located 46 m downslope of the road decreased substantially (≈50 cm) after road construction during moderate rainstorms and then recovered following harvesting. Piezometric responses in sites upslope of the road were not affected by road construction but did increase after harvesting. Moderate storms caused the largest relative increases in pressure head between preharvesting (after roads) and postharvesting conditions; such increases were small during large storms, lending support to the idea that timber harvesting in temperate forests enhances hydrologic response only during small and moderate storms. Since landslides in coastal Pacific Northwest are typically caused by large winter rainstorms, it appears more justified to include better spatial representation of soil physical and engineering parameters in the distributed shallow groundwater model compared to specifying evapotranspiration; road hydrology may, however, need to be included.
- 18 February 2004
- Published by American Geophysical Union (AGU) in Water Resources Research
- Vol. 40 (2)
Pore water pressure assessment in a forest watershed: Simulations and distributed field measurements related to forest practices
A distributed shallow groundwater model related to slope stability is described to assess the spatial distribution of pore water pressure in steep forested terrain in British Columbia. Additionally, effects of timber harvesting and roads on measured changes in pressure head during rainstorms were evaluated for the first time to assess the need for incorporating different hydrological components in the event‐driven distributed model. Although explicit spatial quantification of pore water pressure requires many measurements for accurate prediction, model performance using average parameter values was reasonable when compared with pressure heads measured at nine spatially distributed sites. Increases in maximum pressure head (varying from 9 to 28 cm) between preharvesting (after road construction) and postharvesting rainstorm events were observed in seven of nine sites. The remaining two sites showed either a small decrease (≈5 cm) or similar peak pressure heads following harvesting. Peak pressure head evaluated at one piezometer located 46 m downslope of the road decreased substantially (≈50 cm) after road construction during moderate rainstorms and then recovered following harvesting. Piezometric responses in sites upslope of the road were not affected by road construction but did increase after harvesting. Moderate storms caused the largest relative increases in pressure head between preharvesting (after roads) and postharvesting conditions; such increases were small during large storms, lending support to the idea that timber harvesting in temperate forests enhances hydrologic response only during small and moderate storms. Since landslides in coastal Pacific Northwest are typically caused by large winter rainstorms, it appears more justified to include better spatial representation of soil physical and engineering parameters in the distributed shallow groundwater model compared to specifying evapotranspiration; road hydrology may, however, need to be included.
- 7 August 2003
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 28 (8) , 853-868
Long‐term modelling of landslides for different forest management practices
Long‐term effects of different forest management practices on landslide initiation and volume were analysed using a physically based slope stability model. The watershed‐based model calculates the effects of multiple harvesting entries on slope stability by accounting for the cumulative impacts of a prior vegetation removal on a more recent removal related to vegetation root strength and tree surcharge. Four sequential clearcuts and partial cuts with variable rotation lengths were simulated with or without leave areas and with or without understorey vegetation in a subwatershed of Carnation Creek, Vancouver Island, British Columbia. The combined infinite slope and distributed hydrologic models used to calculate safety factor revealed that most of the simulated landslides were clustered within a 5 to 17 year period after initial harvesting in cases where sufficient time (c. 50 years) lapsed prior to the next harvesting cycle. Partial cutting produced fewer landslides and reduced landslide volume by 1·4‐ to 1·6‐fold compared to clearcutting. Approximately the same total landslide volume was produced when 100 per cent of the site was initially clearcut compared to harvesting 20 per cent of the area in successive 10 year intervals; a similar finding was obtained for partial cutting. Vegetation leave areas were effective in reducing landsliding by 2‐ to 3‐fold. Retaining vigorous understorey vegetation also reduced landslide volume by 3·8‐ to 4·8‐fold. The combined management strategies of partial cutting, increasing rotation length, provision of leave areas, and retention of viable understorey vegetation offer the best alternative for minimizing landslide occurrence in managed forests. Copyright © 2003 John Wiley & Sons, Ltd.
- 7 August 2003
- Published by Wiley in Earth Surface Processes and Landforms
- Vol. 28 (8) , 853-868
Long‐term modelling of landslides for different forest management practices
Long‐term effects of different forest management practices on landslide initiation and volume were analysed using a physically based slope stability model. The watershed‐based model calculates the effects of multiple harvesting entries on slope stability by accounting for the cumulative impacts of a prior vegetation removal on a more recent removal related to vegetation root strength and tree surcharge. Four sequential clearcuts and partial cuts with variable rotation lengths were simulated with or without leave areas and with or without understorey vegetation in a subwatershed of Carnation Creek, Vancouver Island, British Columbia. The combined infinite slope and distributed hydrologic models used to calculate safety factor revealed that most of the simulated landslides were clustered within a 5 to 17 year period after initial harvesting in cases where sufficient time (c. 50 years) lapsed prior to the next harvesting cycle. Partial cutting produced fewer landslides and reduced landslide volume by 1·4‐ to 1·6‐fold compared to clearcutting. Approximately the same total landslide volume was produced when 100 per cent of the site was initially clearcut compared to harvesting 20 per cent of the area in successive 10 year intervals; a similar finding was obtained for partial cutting. Vegetation leave areas were effective in reducing landsliding by 2‐ to 3‐fold. Retaining vigorous understorey vegetation also reduced landslide volume by 3·8‐ to 4·8‐fold. The combined management strategies of partial cutting, increasing rotation length, provision of leave areas, and retention of viable understorey vegetation offer the best alternative for minimizing landslide occurrence in managed forests. Copyright © 2003 John Wiley & Sons, Ltd.