Enrico Bergamaschi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Enrico Bergamaschi has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
A Mutti
14 shared publicationsI Franchini
10 shared publications- Ovidio Bussolati
University of Parma
5 shared publications R Alinovi
Laboratory of Industrial Toxicology, University of Parma Medical School, Italy
5 shared publications- Maria Vittoria Vettori
European Food Safety Authority, Largo Palli 5/A, Parma, Italy
4 shared publications S Cavazzini
4 shared publications
Latest Publications
- Open Access
- 1 January 2016
- Published by Elsevier in Toxicology Reports
- Vol. 3, 230-243
Toxicity determinants of multi-walled carbon nanotubes: The relationship between functionalization and agglomeration
- 1 January 2016
- Published by Elsevier in Toxicology Reports
- Vol. 3, 230-243
Open AccessToxicity determinants of multi-walled carbon nanotubes: The relationship between functionalization and agglomeration
- Open Access
- 25 November 2015
- Published by Oxford University Press (OUP) in Toxicological Sciences
- Vol. 150 (1) , 40-53
Proinflammatory Effects of Pyrogenic and Precipitated Amorphous Silica Nanoparticles in Innate Immunity Cells
Amorphous Silica NanoParticles (ASNP) can be synthetized via several processes, two of which are the thermal route (to yield pyrogenic silica) and the wet route from a solution containing silicate salts (to obtain precipitated, colloidal, mesoporous silica or silica gel). Both methods of synthesis lead to ASNP that are applied as food additive (E551). Current food regulation does not require that production methods of additives are indicated on the product label, and, thus, the ASNP are listed without mentioning the production method. Recent results indicate, however, that pyrogenic ASNP are more cytotoxic than ASNP synthetized through the wet route. The present study was aimed at clarifying if two representative preparations of ASNP, NM-203 (pyrogenic) and NM-200 (precipitated), of comparable size, specific surface area, surface charge and hydrodynamic radius in complete growth medium, had different effects on two murine macrophage cell lines (MH-S and RAW264.7 cells). Our results show that, when incubated in protein-rich fluids, NM-203 adsorbed on their surface more proteins than NM-200 and, once incubated with macrophages, elicited a greater oxidative stress, assessed from Hmox1 induction and ROS production. Flow cytometry and helium ion microscopy indicated that pyrogenic NM-203 interacted with macrophages more strongly than the precipitated NM-200 and triggered a more evident inflammatory response, evaluated with Nos2 induction, NO production, and the secretion of TNF-α, IL-6 and IL-1β. Moreover, both ASNP synergized macrophage activation by bacterial lipopolysaccharide (LPS), with a higher effect observed for NM-203. In conclusion, the results presented here demonstrate that, compared to precipitated, pyrogenic ASNP exhibit enhanced interaction with serum proteins and cell membrane, and cause a larger oxidative stress and stronger pro-inflammatory effects in macrophages. Therefore, these two nanomaterials should not be considered biologically equivalent.
- 25 November 2015
- Published by Oxford University Press (OUP) in Toxicological Sciences
- Vol. 150 (1) , 40-53
Open AccessProinflammatory Effects of Pyrogenic and Precipitated Amorphous Silica Nanoparticles in Innate Immunity Cells
Amorphous Silica NanoParticles (ASNP) can be synthetized via several processes, two of which are the thermal route (to yield pyrogenic silica) and the wet route from a solution containing silicate salts (to obtain precipitated, colloidal, mesoporous silica or silica gel). Both methods of synthesis lead to ASNP that are applied as food additive (E551). Current food regulation does not require that production methods of additives are indicated on the product label, and, thus, the ASNP are listed without mentioning the production method. Recent results indicate, however, that pyrogenic ASNP are more cytotoxic than ASNP synthetized through the wet route. The present study was aimed at clarifying if two representative preparations of ASNP, NM-203 (pyrogenic) and NM-200 (precipitated), of comparable size, specific surface area, surface charge and hydrodynamic radius in complete growth medium, had different effects on two murine macrophage cell lines (MH-S and RAW264.7 cells). Our results show that, when incubated in protein-rich fluids, NM-203 adsorbed on their surface more proteins than NM-200 and, once incubated with macrophages, elicited a greater oxidative stress, assessed from Hmox1 induction and ROS production. Flow cytometry and helium ion microscopy indicated that pyrogenic NM-203 interacted with macrophages more strongly than the precipitated NM-200 and triggered a more evident inflammatory response, evaluated with Nos2 induction, NO production, and the secretion of TNF-α, IL-6 and IL-1β. Moreover, both ASNP synergized macrophage activation by bacterial lipopolysaccharide (LPS), with a higher effect observed for NM-203. In conclusion, the results presented here demonstrate that, compared to precipitated, pyrogenic ASNP exhibit enhanced interaction with serum proteins and cell membrane, and cause a larger oxidative stress and stronger pro-inflammatory effects in macrophages. Therefore, these two nanomaterials should not be considered biologically equivalent.
- 3 August 2012
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 14 (9) , 1-14
Comparative effects of metal oxide nanoparticles on human airway epithelial cells and macrophages
- 3 August 2012
- Published by Springer Nature in Journal of Nanoparticle Research
- Vol. 14 (9) , 1-14
Comparative effects of metal oxide nanoparticles on human airway epithelial cells and macrophages
- Open Access
- 1 January 2012
- Published by Wiley in Journal of Nanomaterials
- Vol. 2012 (1)
Human Biomonitoring of Engineered Nanoparticles: An Appraisal of Critical Issues and Potential Biomarkers
The present paper deals with the applicability of biological monitoring to the assessment of exposure and possible effects deriving from exposure to engineered nanomaterials (NM). After establishing a conceptual framework in which human biomonitoring should be placed, the paper reviews the critical issues related to the unusual properties of NM affecting the implementation of biomonitoring activities for this new class of chemicals. Relying on the recent advances in the toxicogenomic, it is possible to assess whether specific biological pathways are activated or perturbed by specific NM. However, to evaluate if quantitative changes in these biomarkers can be used as indicators or predictors for toxicity in humans, validation on well characterised groups of exposed people is needed. At present, it appears more pragmatic to evolve NM‐associated biomarker identification considering relevant biological responses found in environmental and occupational studies and assessing the early events associated with exposure to these NM. The battery of biochemical markers includes soluble molecules, antioxidant capacity, peroxidated lipids and carbonyl groups in serum proteins as a biomarkers of systemic inflammation and vascular adhesion molecules to assess endothelial activation/damage. Abnormalities in exhaled breath condensate chemistry reflecting intrinsic changes in the airway lining fluid and lung inflammation seem promising tools suitable for BM studies and are broadly discussed.
- 1 January 2012
- Published by Wiley in Journal of Nanomaterials
- Vol. 2012 (1)
Open AccessHuman Biomonitoring of Engineered Nanoparticles: An Appraisal of Critical Issues and Potential Biomarkers
The present paper deals with the applicability of biological monitoring to the assessment of exposure and possible effects deriving from exposure to engineered nanomaterials (NM). After establishing a conceptual framework in which human biomonitoring should be placed, the paper reviews the critical issues related to the unusual properties of NM affecting the implementation of biomonitoring activities for this new class of chemicals. Relying on the recent advances in the toxicogenomic, it is possible to assess whether specific biological pathways are activated or perturbed by specific NM. However, to evaluate if quantitative changes in these biomarkers can be used as indicators or predictors for toxicity in humans, validation on well characterised groups of exposed people is needed. At present, it appears more pragmatic to evolve NM‐associated biomarker identification considering relevant biological responses found in environmental and occupational studies and assessing the early events associated with exposure to these NM. The battery of biochemical markers includes soluble molecules, antioxidant capacity, peroxidated lipids and carbonyl groups in serum proteins as a biomarkers of systemic inflammation and vascular adhesion molecules to assess endothelial activation/damage. Abnormalities in exhaled breath condensate chemistry reflecting intrinsic changes in the airway lining fluid and lung inflammation seem promising tools suitable for BM studies and are broadly discussed.
- 1 June 2009
- Published by SAGE Publications in Human & Experimental Toxicology
- Vol. 28 (6-7) , 361-368
Airway barrier dysfunction induced by exposure to carbon nanotubes in vitro: which role for fiber length?
Although carbon nanotubes (CNTs) are increasingly used, their biological effects are only incompletely characterized. However, experimental evidence suggests that the intratracheal instillation of CNTs causes the formation of interstitial granulomas and progressive pulmonary fibrosis in rodents. Using human epithelial Calu-3 cells as a model of airway epithelium in vitro, we have recently reported that the exposure to commercial multi-walled CNTs (MWCNTs) causes a progressive decrease of the transepithelial electrical resistance (TEER), pointing to a CNT-dependent impairment of the epithelial barrier function. To characterize better this behavior, we compared the effects of two types of MWCNTs and single-walled CNTs (SWCNTs) of different lengths on the TEER of Calu-3 monolayers. All the materials were used at a dose of 100 μg/mL corresponding to an exposure of 73 μg/cm2 of cell monolayer. Only the longer MWCNTs and SWCNTs cause a significant decrease in TEER. To elucidate the mechanism underlying the changes in barrier function, the expression of the junction proteins occludin and ZO-1 has been also assessed. No significant decrease in the mRNA for either protein is detectable after the exposure to any type of CNTs. It is concluded that the impairment of barrier function in Calu-3 monolayers is a peculiar effect of CNTs endowed with clear cut fiber properties and is not referable to marked changes in the expression of junction proteins.
- 1 June 2009
- Published by SAGE Publications in Human & Experimental Toxicology
- Vol. 28 (6-7) , 361-368
Airway barrier dysfunction induced by exposure to carbon nanotubes in vitro: which role for fiber length?
Although carbon nanotubes (CNTs) are increasingly used, their biological effects are only incompletely characterized. However, experimental evidence suggests that the intratracheal instillation of CNTs causes the formation of interstitial granulomas and progressive pulmonary fibrosis in rodents. Using human epithelial Calu-3 cells as a model of airway epithelium in vitro, we have recently reported that the exposure to commercial multi-walled CNTs (MWCNTs) causes a progressive decrease of the transepithelial electrical resistance (TEER), pointing to a CNT-dependent impairment of the epithelial barrier function. To characterize better this behavior, we compared the effects of two types of MWCNTs and single-walled CNTs (SWCNTs) of different lengths on the TEER of Calu-3 monolayers. All the materials were used at a dose of 100 μg/mL corresponding to an exposure of 73 μg/cm2 of cell monolayer. Only the longer MWCNTs and SWCNTs cause a significant decrease in TEER. To elucidate the mechanism underlying the changes in barrier function, the expression of the junction proteins occludin and ZO-1 has been also assessed. No significant decrease in the mRNA for either protein is detectable after the exposure to any type of CNTs. It is concluded that the impairment of barrier function in Calu-3 monolayers is a peculiar effect of CNTs endowed with clear cut fiber properties and is not referable to marked changes in the expression of junction proteins.
- 1 January 2009
- Published by Taylor & Francis in Nanotoxicology
- Vol. 3 (3) , 194-201
Occupational exposure to nanomaterials: Present knowledge and future development
Although unintentional exposure to nanoparticles (NP) is not new in an occupational setting, the global production for specially-engineered nanomaterials (NM) is expected to grow in the next few years, thus requiring an additional recruitment of workers across the world. Among the possible exposure scenarios, the workplaces where NM are produced, processed, used and disposed, may pose specific challenges. Field surveys have shown that workers from nanotechnology industries and R&D facilities have the potential to be exposed by inhalation to aerosols of NM, and skin contamination is not negligible. Owing to the lack of a robust body of scientific evidence on NM hazards, along with the inadequate knowledge on the dose-response relationships as well as long-term consequences to health, only a qualitative risk assessment of a few class of NM is possible. Exposure assessment in new NP processes has begun under the uncertainty about metrology and the lack of internationally recognized occupational standards and exposure limits, but in the near future improvements are expected. Given the limited amount of information about the health risks associated with occupational exposure to engineered NP, the precautionary principle suggests to take measures to minimize worker exposures. Implementing appropriate engineering controls, using personal protective equipment, establishing safe handling procedures, together to monitor worker's health, are all strategic elements of a risk management programme at workplace.
- 1 January 2009
- Published by Taylor & Francis in Nanotoxicology
- Vol. 3 (3) , 194-201
Occupational exposure to nanomaterials: Present knowledge and future development
Although unintentional exposure to nanoparticles (NP) is not new in an occupational setting, the global production for specially-engineered nanomaterials (NM) is expected to grow in the next few years, thus requiring an additional recruitment of workers across the world. Among the possible exposure scenarios, the workplaces where NM are produced, processed, used and disposed, may pose specific challenges. Field surveys have shown that workers from nanotechnology industries and R&D facilities have the potential to be exposed by inhalation to aerosols of NM, and skin contamination is not negligible. Owing to the lack of a robust body of scientific evidence on NM hazards, along with the inadequate knowledge on the dose-response relationships as well as long-term consequences to health, only a qualitative risk assessment of a few class of NM is possible. Exposure assessment in new NP processes has begun under the uncertainty about metrology and the lack of internationally recognized occupational standards and exposure limits, but in the near future improvements are expected. Given the limited amount of information about the health risks associated with occupational exposure to engineered NP, the precautionary principle suggests to take measures to minimize worker exposures. Implementing appropriate engineering controls, using personal protective equipment, establishing safe handling procedures, together to monitor worker's health, are all strategic elements of a risk management programme at workplace.
- 13 February 2007
- Vol. 19, 3-10
Nanomaterials and lung toxicity: interactions with airways cells and relevance for occupational health risk assessment.
Engineered nanoparticles (NP) comprise various classes of technological materials with innovative properties. Although inhalation is less likely for engineered nanomaterials (NM) compared with ambient or mineral dust particles, this can happen during bulk manufacture and handling of freely dispersible NP. In this mini-review we summarize recent data on NP and CNT (carbon nanotubes) hazards, with particular emphasis on toxic effect on lung and in cell culture of lung origin. Owing to the highest deposition efficiency in the alveolar area, primary interactions of NM occur with epithelial and alveolar macrophages (AM). Scarce data are available to date on the cell mechanisms underlying NM permeability across the airway epithelium, but the absorption of NP through airways does not seem to require epithelial mediation, suggesting rather the involvement of alternative mechanisms such as AM-dependent dissemination. The relationship between toxicity and particle characteristics may be complex, involving size, surface area and surface chemistry. Some NM act according to an oxidative stress paradigm, but possible NM interactions with biological systems may result in additional forms of injury. In particular, CNT, a man-made forms of crystalline carbon, are currently attracting intense research efforts because of their unique properties, which make them suitable for many uses in biomedicine and pharmacology. Although CNT stimulate cytokine production and induce inflammatory reactions, they could behave also as conventional fibers, showing the ability to cause lung granulomas and fibrotic reactions in experimental animals. Production and marketing of NM is advancing much more rapidly than research on NM safety. This phenomenon will have a strong impact on the approach of occupational physicians to health risks from NP. In literature increasing evidence suggests that NM are potentially hazardous to humans and that strict industrial hygiene measures should be taken to limit exposure during their manipulation. Moreover, given the uncertainty about the NM features endowed with pathogenetic relevance, the toxicological properties of a specific NP should be evaluated on an individual basis by new screening strategies based on current acquisitions.
- 13 February 2007
- Vol. 19, 3-10
Nanomaterials and lung toxicity: interactions with airways cells and relevance for occupational health risk assessment.
Engineered nanoparticles (NP) comprise various classes of technological materials with innovative properties. Although inhalation is less likely for engineered nanomaterials (NM) compared with ambient or mineral dust particles, this can happen during bulk manufacture and handling of freely dispersible NP. In this mini-review we summarize recent data on NP and CNT (carbon nanotubes) hazards, with particular emphasis on toxic effect on lung and in cell culture of lung origin. Owing to the highest deposition efficiency in the alveolar area, primary interactions of NM occur with epithelial and alveolar macrophages (AM). Scarce data are available to date on the cell mechanisms underlying NM permeability across the airway epithelium, but the absorption of NP through airways does not seem to require epithelial mediation, suggesting rather the involvement of alternative mechanisms such as AM-dependent dissemination. The relationship between toxicity and particle characteristics may be complex, involving size, surface area and surface chemistry. Some NM act according to an oxidative stress paradigm, but possible NM interactions with biological systems may result in additional forms of injury. In particular, CNT, a man-made forms of crystalline carbon, are currently attracting intense research efforts because of their unique properties, which make them suitable for many uses in biomedicine and pharmacology. Although CNT stimulate cytokine production and induce inflammatory reactions, they could behave also as conventional fibers, showing the ability to cause lung granulomas and fibrotic reactions in experimental animals. Production and marketing of NM is advancing much more rapidly than research on NM safety. This phenomenon will have a strong impact on the approach of occupational physicians to health risks from NP. In literature increasing evidence suggests that NM are potentially hazardous to humans and that strict industrial hygiene measures should be taken to limit exposure during their manipulation. Moreover, given the uncertainty about the NM features endowed with pathogenetic relevance, the toxicological properties of a specific NP should be evaluated on an individual basis by new screening strategies based on current acquisitions.
- 23 May 2006
- Vol. 96 (5) , 390-402
[Environmental and biological monitoring of exposure to polycyclic aromatic hydrocarbons in workers of an electric steel foundry].
To assess and classify exposure to Polycyclic Aromatic Hydrocarbons (PAHs) in some specific working areas of a steel foundry operating with a continuous casting process and evaluate biomonitoring data in different job tasks. Exposure to dusts and six PAHs classified as carcinogenic by EU directives was studied in a cohort of 35 male foundry workers (aged 41.1 +/- 6.9 years), who were examined both prior to and at the end of the work-shift (06:00 a.m.-02:00 p.m.) in two different periods. The urinary excretion of 1-hydroxypyrene (1-OH-P) was measured as a biomarker of exposure to pyrene. PAHs concentrations ranged from 461.8 to 935.6 ng/m3 near the continuous casting area, whereas lower values were measured near the ladle furnace. End of shift 1-OH-P values were higher in 11 non-smoking workers involved in continuous casting process as compared to those employed in mantenance and furnace areas (median of the second determination: 5.70 microg/g creatinine--range: 1.24-21.24 vs 1.17 microg/g creatinine--range: 0.23-4.49; p< 0.001). 1-OH-P excretion was significantly correlated with both the sum of six carcinogenic PAHs and pyrene airborne concentrations. In two biomonitoring sessions, 9.1% and 34.3% of the workers respectively showed end-of-shift 1-OH-P values exceeding the occupational exposure limit (OEL) (4.4 microg/g creatinine or 2.3 micromol/mol(-1) creatinine) recommended for coke-oven workers. 1-OH-P is a useful biomarker in assessing PAH exposure and is associated with job category at a Steelplant. Due to exposure variability, to assess risk associated with PAHs exposure, biological monitoring should be carried out periodically.
- 23 May 2006
- Vol. 96 (5) , 390-402
[Environmental and biological monitoring of exposure to polycyclic aromatic hydrocarbons in workers of an electric steel foundry].
To assess and classify exposure to Polycyclic Aromatic Hydrocarbons (PAHs) in some specific working areas of a steel foundry operating with a continuous casting process and evaluate biomonitoring data in different job tasks. Exposure to dusts and six PAHs classified as carcinogenic by EU directives was studied in a cohort of 35 male foundry workers (aged 41.1 +/- 6.9 years), who were examined both prior to and at the end of the work-shift (06:00 a.m.-02:00 p.m.) in two different periods. The urinary excretion of 1-hydroxypyrene (1-OH-P) was measured as a biomarker of exposure to pyrene. PAHs concentrations ranged from 461.8 to 935.6 ng/m3 near the continuous casting area, whereas lower values were measured near the ladle furnace. End of shift 1-OH-P values were higher in 11 non-smoking workers involved in continuous casting process as compared to those employed in mantenance and furnace areas (median of the second determination: 5.70 microg/g creatinine--range: 1.24-21.24 vs 1.17 microg/g creatinine--range: 0.23-4.49; p< 0.001). 1-OH-P excretion was significantly correlated with both the sum of six carcinogenic PAHs and pyrene airborne concentrations. In two biomonitoring sessions, 9.1% and 34.3% of the workers respectively showed end-of-shift 1-OH-P values exceeding the occupational exposure limit (OEL) (4.4 microg/g creatinine or 2.3 micromol/mol(-1) creatinine) recommended for coke-oven workers. 1-OH-P is a useful biomarker in assessing PAH exposure and is associated with job category at a Steelplant. Due to exposure variability, to assess risk associated with PAHs exposure, biological monitoring should be carried out periodically.
- 26 February 2004
- No. 3,p. 104-6
[Indicators of pulmonary epithelial damage among workers at a foundry exposed to airborne pollutants].
Foundry ambient air contains very high concentrations of noxious substances, such as particulate matter and gaseous pollutants, which can target the respiratory epithelium. Serum concentrations of the 16-kDa Clara cell protein (CC16-S) may reflect both the integrity of the epithelial barrier and smoke-induced Clara cell toxicity. To evaluate whether CC16-S is a sensitive biomarker of early respiratory disturbances, it was determined in a group of 35 foundry male workers (aged 41.1 +/- 6.9 years) examined both prior to and at the end of their work-shift (06:00 a.m.-02:00 p.m.). Exposure to inhalable/respirable dusts and PAH was characterized; urinary excretion of 1-hydroxypyrene (1-OH-P) and naphtol was measured to assess exposure to pyrene and naphthalene, respectively. CC16 serum levels decreased at the end of the shift (10.7 +/- 3.82 micrograms/L vs. 8.39 +/- 3.05 micrograms/L; p < 0.01); such decrements were significantly larger in more exposed workers. Although smokers had lower baseline values as compared to non smokers, both subgroups showed an average decrease of 30% in CC16-S concentrations at the end of shift. CC16-S was also negatively correlated with 1-OH-P, but not with naphtol concentrations. Decreased CC16-S levels can result from citotoxicity and would represent an useful biomarker of pneumotoxicity in foundry workers exposed to complex mixtures.
- 26 February 2004
- No. 3,p. 104-6
[Indicators of pulmonary epithelial damage among workers at a foundry exposed to airborne pollutants].
Foundry ambient air contains very high concentrations of noxious substances, such as particulate matter and gaseous pollutants, which can target the respiratory epithelium. Serum concentrations of the 16-kDa Clara cell protein (CC16-S) may reflect both the integrity of the epithelial barrier and smoke-induced Clara cell toxicity. To evaluate whether CC16-S is a sensitive biomarker of early respiratory disturbances, it was determined in a group of 35 foundry male workers (aged 41.1 +/- 6.9 years) examined both prior to and at the end of their work-shift (06:00 a.m.-02:00 p.m.). Exposure to inhalable/respirable dusts and PAH was characterized; urinary excretion of 1-hydroxypyrene (1-OH-P) and naphtol was measured to assess exposure to pyrene and naphthalene, respectively. CC16 serum levels decreased at the end of the shift (10.7 +/- 3.82 micrograms/L vs. 8.39 +/- 3.05 micrograms/L; p < 0.01); such decrements were significantly larger in more exposed workers. Although smokers had lower baseline values as compared to non smokers, both subgroups showed an average decrease of 30% in CC16-S concentrations at the end of shift. CC16-S was also negatively correlated with 1-OH-P, but not with naphtol concentrations. Decreased CC16-S levels can result from citotoxicity and would represent an useful biomarker of pneumotoxicity in foundry workers exposed to complex mixtures.
- 1 May 2001
- Published by Oxford University Press (OUP) in American Journal of Respiratory and Critical Care Medicine
- Vol. 163 (6) , 1426-1431
Polymorphism of Quinone-metabolizing Enzymes and Susceptibility to Ozone-induced Acute Effects
The role of the genetic polymorphism of NAD(P)H:quinone oxidoreductase (NQO1) and glutathione-S-transferase μ -1 (GSTM1) in the responsiveness to O3-induced acute effects was investigated in 24 healthy nonsmokers performing 2-h bike rides at ambient O3 varying from 32 to 103 ppb. Before and after rides, each subject performed spirometric tests and provided a blood sample for the measurement of the Clara cell protein CC16. NQO1 and GSTM1 polymorphisms were characterized by polymerase chain reaction– based methods. The 8-hydroxy-2′-deoxyguanosine (8-OHdG) adduct was also measured in DNA of peripheral leukocytes. Rides at O3 > 80 ppb resulted in significant decrements of pulmonary function tests and increased levels of serum CC16, consistent with mild impairment in respiratory function and increased lung epithelial permeability, respectively. Whereas NQO1wt and GSTM1null subjects showed both functional changes and increased serum CC16 after acute O3 exposure, people with other haplotypes showed a rise in serum CC16 but no changes in lung function tests. In NQO1wt and GSTM1null subjects, partial correlation analysis showed that functional decrements and increased serum CC16 are closely associated with each other and with O3 levels, whereas no such relationships were found among subjects bearing other haplotypes. An increased reaction rate between O3 and hydroquinones would be consistent with the greater increase in 8-OHdG after O3 exposure in this “susceptible” group.
- 1 May 2001
- Published by Oxford University Press (OUP) in American Journal of Respiratory and Critical Care Medicine
- Vol. 163 (6) , 1426-1431
Polymorphism of Quinone-metabolizing Enzymes and Susceptibility to Ozone-induced Acute Effects
The role of the genetic polymorphism of NAD(P)H:quinone oxidoreductase (NQO1) and glutathione-S-transferase μ -1 (GSTM1) in the responsiveness to O3-induced acute effects was investigated in 24 healthy nonsmokers performing 2-h bike rides at ambient O3 varying from 32 to 103 ppb. Before and after rides, each subject performed spirometric tests and provided a blood sample for the measurement of the Clara cell protein CC16. NQO1 and GSTM1 polymorphisms were characterized by polymerase chain reaction– based methods. The 8-hydroxy-2′-deoxyguanosine (8-OHdG) adduct was also measured in DNA of peripheral leukocytes. Rides at O3 > 80 ppb resulted in significant decrements of pulmonary function tests and increased levels of serum CC16, consistent with mild impairment in respiratory function and increased lung epithelial permeability, respectively. Whereas NQO1wt and GSTM1null subjects showed both functional changes and increased serum CC16 after acute O3 exposure, people with other haplotypes showed a rise in serum CC16 but no changes in lung function tests. In NQO1wt and GSTM1null subjects, partial correlation analysis showed that functional decrements and increased serum CC16 are closely associated with each other and with O3 levels, whereas no such relationships were found among subjects bearing other haplotypes. An increased reaction rate between O3 and hydroquinones would be consistent with the greater increase in 8-OHdG after O3 exposure in this “susceptible” group.