Vecihi Yiğit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Vecihi Yiğit has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Mehmet Emin Aydin
School of Computing and Creative Technologies, University of the West of England, Bristol BS16 1QY, UK
4 shared publications - Muhammed Emre Keskin
Atatürk University
3 shared publications - Emine Ertane Baş
Atatürk Universitesi
2 shared publications - Hisham Alidrisi
Department of Industrial Engineering, Faculty of Engineering, King Abdulaziz University, Jeddah 21589, Saudi Arabia
2 shared publications - İlker Karadağ
Sivas Cumhuriyet Üniversitesi
2 shared publications - Şeyma Emeç
Erzurum Teknik Universitesi
2 shared publications
Latest Publications
- Open Access
- 15 October 2025
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 32 (5) , 1798-1809
Wireless Sensor Network Design in Grid-Free Structure
Sensors are small devices with limited battery, sensing, data processing, and communication capabilities. When many of them work together to monitor remote or hostile environments, they form a wireless sensor network (WSN). Designing WSNs requires pr...
- 15 October 2025
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 32 (5) , 1798-1809
Open AccessWireless Sensor Network Design in Grid-Free Structure
Sensors are small devices with limited battery, sensing, data processing, and communication capabilities. When many of them work together to monitor remote or hostile environments, they form a wireless sensor network (WSN). Designing WSNs requires pr...
- 25 September 2025
- Published by Gumushane University in Gümüşhane Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 14 (3) , 1075-1085
Analysis of the Effects of Obesity Classes on Manual Lifting Using Fuzzy Differential Modeling
Obesity has emerged as a major global public health challenge, while musculoskeletal disorders (MSDs) remain the leading cause of injury, disability, and work-related absenteeism worldwide. Increased body mass amplifies the mechanical load exerted on the musculoskeletal system during lifting tasks. In this study, a fuzzy differential equation-based model was developed to evaluate the biomechanical impact of manual material handling across varying body weights. The model quantifies the joint forces and moments at the lower back, explicitly accounting for uncertainties inherent in the model parameters. In biomechanical modeling, obesity introduces inherent uncertainties, primarily due to inter-individual variations in body composition, particularly the relative amounts and distribution of adipose and muscle tissue, which differentially affect mechanical responses to load and movement. To address these uncertainties, fuzzy differential equations (FDEs) offer a structured approach by incorporating imprecise parameters, initial conditions, and biological variability using fuzzy logic. Unlike classical methods, FDEs represent variables as fuzzy numbers, enabling simulations to better capture the imprecision of the real world. The results showed that with increasing obesity levels, both the forces and moments acting on the lower back during lifting tasks was increased noticeably. This pattern was observed consistently across different load weights and body heights, indicating that higher BMI leads to more greater biomechanical stress on the musculoskeletal system. The FDE model was successful in capturing the uncertainties caused by variations in body composition and changes in balance due to obesity. This approach provides a more realistic understanding of mechanical loads compared to traditional models.
- 25 September 2025
- Published by Gumushane University in Gümüşhane Üniversitesi Sağlık Bilimleri Dergisi
- Vol. 14 (3) , 1075-1085
Analysis of the Effects of Obesity Classes on Manual Lifting Using Fuzzy Differential Modeling
Obesity has emerged as a major global public health challenge, while musculoskeletal disorders (MSDs) remain the leading cause of injury, disability, and work-related absenteeism worldwide. Increased body mass amplifies the mechanical load exerted on the musculoskeletal system during lifting tasks. In this study, a fuzzy differential equation-based model was developed to evaluate the biomechanical impact of manual material handling across varying body weights. The model quantifies the joint forces and moments at the lower back, explicitly accounting for uncertainties inherent in the model parameters. In biomechanical modeling, obesity introduces inherent uncertainties, primarily due to inter-individual variations in body composition, particularly the relative amounts and distribution of adipose and muscle tissue, which differentially affect mechanical responses to load and movement. To address these uncertainties, fuzzy differential equations (FDEs) offer a structured approach by incorporating imprecise parameters, initial conditions, and biological variability using fuzzy logic. Unlike classical methods, FDEs represent variables as fuzzy numbers, enabling simulations to better capture the imprecision of the real world. The results showed that with increasing obesity levels, both the forces and moments acting on the lower back during lifting tasks was increased noticeably. This pattern was observed consistently across different load weights and body heights, indicating that higher BMI leads to more greater biomechanical stress on the musculoskeletal system. The FDE model was successful in capturing the uncertainties caused by variations in body composition and changes in balance due to obesity. This approach provides a more realistic understanding of mechanical loads compared to traditional models.
- 22 August 2025
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 12 (1)
Novel heuristic optimisation approaches to organise a large-scale blood supply chain
- 22 August 2025
- Published by Taylor & Francis in International Journal of Systems Science: Operations & Logistics
- Vol. 12 (1)
Novel heuristic optimisation approaches to organise a large-scale blood supply chain
- Open Access
- 18 March 2025
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 10 (1) , 1159-1183
A roadmap for the utilization of renewable energy sources for the sustainable development of Turkey's electricity energy system
Turkey’s achievement of sustainable energy goals can be realized through the enhancement of renewable energy capacity and the strategic integration of nuclear energy. This study aims to promote the use of renewable energy sources and evaluate the impacts of integrating nuclear energy into the energy system to support Turkey’s sustainable energy objectives. Within the framework of the Turkish National Energy Plan, two scenario groups covering the 2025-2050 period were developed using the EnergyPLAN simulation program (version 16.22). The first scenario group focuses solely on the gradual increase of renewable energy capacity, while the second scenario group examines the effects of nuclear energy on energy security and carbon emissions. The results indicate that, in scenarios without nuclear energy, CO₂ emissions decrease by 28%, whereas, with the integration of nuclear energy, this reduction reaches 39%. This comprehensive assessment provides important recommendations that contribute to Turkey’s energy security and sustainable development strategies.
- 18 March 2025
- Published by Türkiye Enerji Stratejileri ve Politikalari Araştirma Merkezi (TESPAM) in International Journal of Energy Studies
- Vol. 10 (1) , 1159-1183
Open AccessA roadmap for the utilization of renewable energy sources for the sustainable development of Turkey's electricity energy system
Turkey’s achievement of sustainable energy goals can be realized through the enhancement of renewable energy capacity and the strategic integration of nuclear energy. This study aims to promote the use of renewable energy sources and evaluate the impacts of integrating nuclear energy into the energy system to support Turkey’s sustainable energy objectives. Within the framework of the Turkish National Energy Plan, two scenario groups covering the 2025-2050 period were developed using the EnergyPLAN simulation program (version 16.22). The first scenario group focuses solely on the gradual increase of renewable energy capacity, while the second scenario group examines the effects of nuclear energy on energy security and carbon emissions. The results indicate that, in scenarios without nuclear energy, CO₂ emissions decrease by 28%, whereas, with the integration of nuclear energy, this reduction reaches 39%. This comprehensive assessment provides important recommendations that contribute to Turkey’s energy security and sustainable development strategies.
- Open Access
- 17 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (6) , 2665
Simulation of Renewable Energy Systems with Alternative Energy Scenarios in Turkey’s Electrical Energy Planning
The rise in global energy demand and the escalating impacts of the climate crisis have made the rapid reduction of CO2 emissions imperative. In response, Turkey has committed to achieving net-zero carbon emissions by 2053 in alignment with the Paris Agreement, emphasizing the critical role of energy transition strategies in meeting this goal. To explore these strategies, this study developed four distinct scenarios encompassing the electricity, transportation, industry, and heating sectors using the EnergyPLAN (v16.22) software. While the first three scenarios focus on renewable energy, aiming to increase the share of renewables from 45% in 2025 to 82% in 2040, the fourth scenario incorporates nuclear energy, achieving greater CO2 reductions despite a relatively lower share of renewables. These scenarios were simulated using the EnergyPLAN model, and the results were analyzed in detail. The modeling outcomes indicate that sustainable energy transition is both environmentally and economically feasible. Additionally, a sensitivity analysis was conducted to assess variations in energy demand, and a cost–benefit analysis was performed to evaluate the economic viability of the scenarios. By adopting a multi-sectoral approach, an aspect rarely explored in the literature, this study provides a comprehensive analysis of nuclear and renewable energy combinations. Furthermore, qualitative analytical methods, including grounded theory and semantic analysis, were employed to elucidate the relationship between energy policies and modeling scenarios. In this regard, the study not only contributes to the academic literature but also offers a scientifically grounded framework to support decision-making processes for policymakers and energy sector professionals.
- 17 March 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (6) , 2665
Open AccessSimulation of Renewable Energy Systems with Alternative Energy Scenarios in Turkey’s Electrical Energy Planning
The rise in global energy demand and the escalating impacts of the climate crisis have made the rapid reduction of CO2 emissions imperative. In response, Turkey has committed to achieving net-zero carbon emissions by 2053 in alignment with the Paris Agreement, emphasizing the critical role of energy transition strategies in meeting this goal. To explore these strategies, this study developed four distinct scenarios encompassing the electricity, transportation, industry, and heating sectors using the EnergyPLAN (v16.22) software. While the first three scenarios focus on renewable energy, aiming to increase the share of renewables from 45% in 2025 to 82% in 2040, the fourth scenario incorporates nuclear energy, achieving greater CO2 reductions despite a relatively lower share of renewables. These scenarios were simulated using the EnergyPLAN model, and the results were analyzed in detail. The modeling outcomes indicate that sustainable energy transition is both environmentally and economically feasible. Additionally, a sensitivity analysis was conducted to assess variations in energy demand, and a cost–benefit analysis was performed to evaluate the economic viability of the scenarios. By adopting a multi-sectoral approach, an aspect rarely explored in the literature, this study provides a comprehensive analysis of nuclear and renewable energy combinations. Furthermore, qualitative analytical methods, including grounded theory and semantic analysis, were employed to elucidate the relationship between energy policies and modeling scenarios. In this regard, the study not only contributes to the academic literature but also offers a scientifically grounded framework to support decision-making processes for policymakers and energy sector professionals.
- 18 February 2021
- Published by Springer Nature in Soft Computing
- Vol. 25 (8) , 6311-6327
Re-design of a blood supply chain organization with mobile units
This research analyses the re-organization of a blood supply chain organization. Blood supply chain network design is a hard problem. Uncertainties of the blood supply and demand, perishability of blood over time and compatibility of blood types are some factors that make the problem difficult. This paper presents a novel multi-objective mixed-integer location-allocation model for a blood supply chain design problem. Unlike many studies on blood supply chain design in the literature, supply chain network consisting of mobile and permanent units is planned together effectively with our mixed-integer programming model. Multi-objective structure of the model minimizes distances between the blood supply chain elements and the length of the mobile unit routes. The objectives are prioritized by experts using the Analytical Hierarchical Process. Finally, the model is implemented on a real life case study using real data from the Eastern Anatolia region of Turkey for various supply demand scenarios. The solutions offered by the model are compared with the current situation in the region. It is shown that the proposed model gives at least %25 more effective solutions. Moreover, sensitivity analysis on the budget constraint is conducted, and robustness of the model is empirically illustrated.
- 18 February 2021
- Published by Springer Nature in Soft Computing
- Vol. 25 (8) , 6311-6327
Re-design of a blood supply chain organization with mobile units
This research analyses the re-organization of a blood supply chain organization. Blood supply chain network design is a hard problem. Uncertainties of the blood supply and demand, perishability of blood over time and compatibility of blood types are some factors that make the problem difficult. This paper presents a novel multi-objective mixed-integer location-allocation model for a blood supply chain design problem. Unlike many studies on blood supply chain design in the literature, supply chain network consisting of mobile and permanent units is planned together effectively with our mixed-integer programming model. Multi-objective structure of the model minimizes distances between the blood supply chain elements and the length of the mobile unit routes. The objectives are prioritized by experts using the Analytical Hierarchical Process. Finally, the model is implemented on a real life case study using real data from the Eastern Anatolia region of Turkey for various supply demand scenarios. The solutions offered by the model are compared with the current situation in the region. It is shown that the proposed model gives at least %25 more effective solutions. Moreover, sensitivity analysis on the budget constraint is conducted, and robustness of the model is empirically illustrated.
- Open Access
- 31 December 2020
- Published by MDPI AG in Mathematics
- Vol. 9 (1) , 82
Elicitation of the Factors Affecting Electricity Distribution Efficiency Using the Fuzzy AHP Method
Efficient and uninterrupted energy supply plays a crucial role in the quality of modern daily life, while it is obvious that the efficiency and performance of energy supply companies has a significant impact on energy supply itself and on determining and finetuning the future roadmap of the sector. In this study, the performance and efficiency of energy supply companies with respect to productivity is investigated with reference to a case study of an electricity distribution company in Turkey. The factors affecting the company’s performance and their corresponding weight have been determined and obtained using the analytical hierarchy process (AHP) and the Fuzzy AHP methods, two well-known multi-criteria decision-making methods, which are widely used in the literature. The results help demonstrate that the criteria obtained to evaluate the company’s energy supply performance play a crucial role in developing strategies, policies and action plans to achieve continuous improvement and consistent development.
- 31 December 2020
- Published by MDPI AG in Mathematics
- Vol. 9 (1) , 82
Open AccessElicitation of the Factors Affecting Electricity Distribution Efficiency Using the Fuzzy AHP Method
Efficient and uninterrupted energy supply plays a crucial role in the quality of modern daily life, while it is obvious that the efficiency and performance of energy supply companies has a significant impact on energy supply itself and on determining and finetuning the future roadmap of the sector. In this study, the performance and efficiency of energy supply companies with respect to productivity is investigated with reference to a case study of an electricity distribution company in Turkey. The factors affecting the company’s performance and their corresponding weight have been determined and obtained using the analytical hierarchy process (AHP) and the Fuzzy AHP methods, two well-known multi-criteria decision-making methods, which are widely used in the literature. The results help demonstrate that the criteria obtained to evaluate the company’s energy supply performance play a crucial role in developing strategies, policies and action plans to achieve continuous improvement and consistent development.
- Open Access
- 3 December 2020
- Published by MDPI AG in Preprints.org
Elicitation of the Factors Affecting Electricity Distribution Efficiency using Fuzzy AHP Method: A Case Study
Energy consumption constantly increases day-by-day, which enforces suppliers and consumers in to plan the needs for the short and long terms. This obliges studying to device useful and accurate ways to predict the need for use in corresponding periods of the time. One of these fields of study is the efficient and uninterrupted energy supply over distribution infrastructures. It is obvious that the efficiency and performance of energy supply companies plays an important role in energy supply itself and has a critical value in determining and finetuning the future roadmap of the sector. In this study, the performance and efficiency of energy supply companies with respect to productivity is investigated over a case study of an electricity distribution company in Turkey. The factors affecting the company’s performance and their corresponding weights have been determined and elicited using analytical hierarchy process (AHP) and the Fuzzy AHP methods, as two well-known multi-criteria decision-making methods. The AHP method differs from other methods in that it can evaluate qualitative and quantitative expressions together, calculate the consistency rate, and show the hierarchical structure between sub-criteria and alternatives depending on the criteria. In addition, it is a decision-making method that is widely used in the literature. The Fuzzy AHP method, on the other hand, reflects the evaluations of people better than the classical AHP method and provides convenience during the evaluation. The results help demonstrate that the criteria elicited to evaluate the company’s energy supply performance plan a crucial role in developing strategies, policies and action plans to achieve continuous improvement and consistent development.
- 3 December 2020
- Published by MDPI AG in Preprints.org
Open AccessElicitation of the Factors Affecting Electricity Distribution Efficiency using Fuzzy AHP Method: A Case Study
Energy consumption constantly increases day-by-day, which enforces suppliers and consumers in to plan the needs for the short and long terms. This obliges studying to device useful and accurate ways to predict the need for use in corresponding periods of the time. One of these fields of study is the efficient and uninterrupted energy supply over distribution infrastructures. It is obvious that the efficiency and performance of energy supply companies plays an important role in energy supply itself and has a critical value in determining and finetuning the future roadmap of the sector. In this study, the performance and efficiency of energy supply companies with respect to productivity is investigated over a case study of an electricity distribution company in Turkey. The factors affecting the company’s performance and their corresponding weights have been determined and elicited using analytical hierarchy process (AHP) and the Fuzzy AHP methods, as two well-known multi-criteria decision-making methods. The AHP method differs from other methods in that it can evaluate qualitative and quantitative expressions together, calculate the consistency rate, and show the hierarchical structure between sub-criteria and alternatives depending on the criteria. In addition, it is a decision-making method that is widely used in the literature. The Fuzzy AHP method, on the other hand, reflects the evaluations of people better than the classical AHP method and provides convenience during the evaluation. The results help demonstrate that the criteria elicited to evaluate the company’s energy supply performance plan a crucial role in developing strategies, policies and action plans to achieve continuous improvement and consistent development.
- 15 November 2006
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 44 (22) , 4773-4791
Solving large-scale uncapacitated facility location problems with evolutionary simulated annealing
Uncapacitated Facility Location (UFL) Problems are, in general, modelled as mixed integer programming problems, which are known as NP-hard problems. In recent years, a few publications have appeared on the metaheuristics for solving UFL problems, discussing the performance of particular implementations of metaheuristics for small and middle size UFL benchmarks. The large-scale problems remain untouched. The approach presented in this paper attempts to tackle them with a metaheuristics combining two well-known approaches. The idea is to enable algorithm searching through solution space by taking advantage of both underlying approaches in order to avoid local minima. The power of simulated annealing (SA) in local search and that of the evolutionary approach in global search have been brought together to obtain the desired solution quality within a shorter time.
- 15 November 2006
- Published by Taylor & Francis in International Journal of Production Research
- Vol. 44 (22) , 4773-4791
Solving large-scale uncapacitated facility location problems with evolutionary simulated annealing
Uncapacitated Facility Location (UFL) Problems are, in general, modelled as mixed integer programming problems, which are known as NP-hard problems. In recent years, a few publications have appeared on the metaheuristics for solving UFL problems, discussing the performance of particular implementations of metaheuristics for small and middle size UFL benchmarks. The large-scale problems remain untouched. The approach presented in this paper attempts to tackle them with a metaheuristics combining two well-known approaches. The idea is to enable algorithm searching through solution space by taking advantage of both underlying approaches in order to avoid local minima. The power of simulated annealing (SA) in local search and that of the evolutionary approach in global search have been brought together to obtain the desired solution quality within a shorter time.
- 1 January 2004
- Published by Springer Nature
- p. 185-194
Evolutionary Simulated Annealing Algorithms for Uncapacitated Facility Location Problems
- 1 January 2004
- Published by Springer Nature
- p. 185-194
Evolutionary Simulated Annealing Algorithms for Uncapacitated Facility Location Problems