Shinji Okamoto
Research Subjects
Shinji Okamoto has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Hajime Yamamoto
School of Bionics, Tokyo University of Technology, Hachioji, Tokyo 192-0982, Japan
4 shared publicationsM. Kobayashi
Graduate School of Materials Science, Nara Institute of Science and Technology, Ikoma, Nara 630‐0101, Japan
1 shared publicationT. Kushida
Graduate School of Materials Science, Nara Institute of Science and Technology, Ikoma, Nara 630‐0101, Japan
1 shared publicationY. Kanemitsu
Graduate School of Materials Science, Nara Institute of Science and Technology, Ikoma, Nara 630‐0101, Japan
1 shared publicationYousuke Umetsu
Tokyo Kagaku Kenkyusho Company, Limited, Yamato, Kanagawa 242-0001, Japan
1 shared publication
Latest Publications
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (3) , J59-J63
Luminescent-Efficiency Improvement by Alkaline-Earth Fluorides Partially Replacing MgO in 3.5MgO⋅0.5MgF[sub 2]⋅GeO[sub 2]:Mn[sup 4+] Deep-Red Phosphors for Light Emitting Diodes
We have investigated the luminescent properties of partially replaced by alkaline-earth fluorides under near-UV and blue light excitations. The alkaline-earth fluoride other than probably acts as a flux. The sample with the replacement of of MgO by of , i.e., (MGF-SF08), shows efficient deep-red emission at , and its photoluminescence (PL) intensity is over 3 times higher than a commercial (YAG) phosphor, P46-Y3, under light excitation. Under light excitation, MGF-SF08 is over 7 times higher than a commercial (YOS) phosphor, P22-RE3, in PL peak intensity. Moreover, the alkaline-earth fluorogermanate phosphors show more thermal stability than the YAG and the YOS phosphors in integrated PL intensity. The integrated PL intensity of MGF-SF08 at is still 95% of that measured at room temperature under light excitation. These results imply that -doped alkaline-earth fluorogermanates are promising candidates of deep-red phosphors for near-UV and blue light emitting diodes.
- 1 January 2010
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 157 (3) , J59-J63
Luminescent-Efficiency Improvement by Alkaline-Earth Fluorides Partially Replacing MgO in 3.5MgO⋅0.5MgF[sub 2]⋅GeO[sub 2]:Mn[sup 4+] Deep-Red Phosphors for Light Emitting Diodes
We have investigated the luminescent properties of partially replaced by alkaline-earth fluorides under near-UV and blue light excitations. The alkaline-earth fluoride other than probably acts as a flux. The sample with the replacement of of MgO by of , i.e., (MGF-SF08), shows efficient deep-red emission at , and its photoluminescence (PL) intensity is over 3 times higher than a commercial (YAG) phosphor, P46-Y3, under light excitation. Under light excitation, MGF-SF08 is over 7 times higher than a commercial (YOS) phosphor, P22-RE3, in PL peak intensity. Moreover, the alkaline-earth fluorogermanate phosphors show more thermal stability than the YAG and the YOS phosphors in integrated PL intensity. The integrated PL intensity of MGF-SF08 at is still 95% of that measured at room temperature under light excitation. These results imply that -doped alkaline-earth fluorogermanates are promising candidates of deep-red phosphors for near-UV and blue light emitting diodes.
- 1 January 2009
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 12 (12) , J112-J115
Photoluminescent Properties of Eu[sup 2+]-Doped Alkaline-Earth Chlorosilicate Phosphors for LED-Based Solid-State Lighting
Investigation was performed on luminescent properties of some -doped alkaline-earth chlorosilicate phosphors for excitation by near-UV or blue light-emitting diodes (LEDs). A two-step firing process is available to increase the photoluminescence (PL) intensity of the chlorosilicates. For example, shows efficient green emission at 509 nm and is about 2.8 times higher than a commercial (YAG) in PL peak intensity under 450 nm light excitation. Moreover, the chlorosilicates show less thermal quenching than the reference YAG in PL integrated intensity. These results imply that some -doped alkaline-earth chlorosilicates are promising candidates as phosphors for near-UV and blue LEDs.
- 1 January 2009
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 12 (12) , J112-J115
Photoluminescent Properties of Eu[sup 2+]-Doped Alkaline-Earth Chlorosilicate Phosphors for LED-Based Solid-State Lighting
Investigation was performed on luminescent properties of some -doped alkaline-earth chlorosilicate phosphors for excitation by near-UV or blue light-emitting diodes (LEDs). A two-step firing process is available to increase the photoluminescence (PL) intensity of the chlorosilicates. For example, shows efficient green emission at 509 nm and is about 2.8 times higher than a commercial (YAG) in PL peak intensity under 450 nm light excitation. Moreover, the chlorosilicates show less thermal quenching than the reference YAG in PL integrated intensity. These results imply that some -doped alkaline-earth chlorosilicates are promising candidates as phosphors for near-UV and blue LEDs.
- 1 January 2008
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (7) , J193-J197
Photoluminescence Properties of Ba[sub 3]MgSi[sub 2]O[sub 8]:Eu[sup 2+] Blue Phosphor and Ba[sub 3]MgSi[sub 2]O[sub 8]:Eu[sup 2+],Mn[sup 2+] Blue-Red Phosphor under Near-Ultraviolet-Light Excitation
Photoluminescence (PL) properties of Ba3MgSi2O8:Eu2+Ba3MgSi2O8:Eu2+ (BMS-E) blue phosphor and Ba3MgSi2O8:Eu2+,Mn2+Ba3MgSi2O8:Eu2+,Mn2+ (BMS-EM) blue-red phosphor under near-UV-light excitation were investigated. BMS-E shows efficient blue-violet emission at 437nm437nm under 405nm405nm light excitation. The sample doped with 0.05mol∕mol0.05mol∕mol Eu2+Eu2+ shows PL peak intensity about twice higher than a commercial BaMgAl10O17:Eu2+BaMgAl10O17:Eu2+ (BAM) for low-pressure Hg lamps. The PL integrated intensity of BMS-E below 0.2mol∕mol0.2mol∕mol of Eu content is similar to that of BAM in magnitude of thermal quenching. BMS-EM shows strong red emission under 405nm405nm light excitation because of the efficient energy transfer from Eu2+Eu2+ to Mn2+Mn2+ . The sample doped with 0.10mol∕mol0.10mol∕mol Eu2+Eu2+ and 0.10mol∕mol0.10mol∕mol Mn2+Mn2+ shows luminance about 12 and 3 times larger than Y2O2S:Eu3+Y2O2S:Eu3+ and La2O2S:Eu3+La2O2S:Eu3+ , respectively. Moreover, the PL integrated intensity of the BMS-EM shows less thermal quenching than that of La2O2S:Eu3+La2O2S:Eu3+ and (Y,Gd)3(Al,Ga)5O12:Ce3+(Y,Gd)3(Al,Ga)5O12:Ce3+ (YAG:Ce3+)(YAG:Ce3+) . These results indicate that BMS-E and BMS-EM are promising phosphors for white light-emitting diodes (LEDs) fabricated with near-UV LEDs.
- 1 January 2008
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 155 (7) , J193-J197
Photoluminescence Properties of Ba[sub 3]MgSi[sub 2]O[sub 8]:Eu[sup 2+] Blue Phosphor and Ba[sub 3]MgSi[sub 2]O[sub 8]:Eu[sup 2+],Mn[sup 2+] Blue-Red Phosphor under Near-Ultraviolet-Light Excitation
Photoluminescence (PL) properties of Ba3MgSi2O8:Eu2+Ba3MgSi2O8:Eu2+ (BMS-E) blue phosphor and Ba3MgSi2O8:Eu2+,Mn2+Ba3MgSi2O8:Eu2+,Mn2+ (BMS-EM) blue-red phosphor under near-UV-light excitation were investigated. BMS-E shows efficient blue-violet emission at 437nm437nm under 405nm405nm light excitation. The sample doped with 0.05mol∕mol0.05mol∕mol Eu2+Eu2+ shows PL peak intensity about twice higher than a commercial BaMgAl10O17:Eu2+BaMgAl10O17:Eu2+ (BAM) for low-pressure Hg lamps. The PL integrated intensity of BMS-E below 0.2mol∕mol0.2mol∕mol of Eu content is similar to that of BAM in magnitude of thermal quenching. BMS-EM shows strong red emission under 405nm405nm light excitation because of the efficient energy transfer from Eu2+Eu2+ to Mn2+Mn2+ . The sample doped with 0.10mol∕mol0.10mol∕mol Eu2+Eu2+ and 0.10mol∕mol0.10mol∕mol Mn2+Mn2+ shows luminance about 12 and 3 times larger than Y2O2S:Eu3+Y2O2S:Eu3+ and La2O2S:Eu3+La2O2S:Eu3+ , respectively. Moreover, the PL integrated intensity of the BMS-EM shows less thermal quenching than that of La2O2S:Eu3+La2O2S:Eu3+ and (Y,Gd)3(Al,Ga)5O12:Ce3+(Y,Gd)3(Al,Ga)5O12:Ce3+ (YAG:Ce3+)(YAG:Ce3+) . These results indicate that BMS-E and BMS-EM are promising phosphors for white light-emitting diodes (LEDs) fabricated with near-UV LEDs.
- 1 January 2007
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 10 (10) , J139-J142
Photoluminescent Properties of (La,Eu,Sm)[sub 2]W[sub 3]O[sub 12] Red Phosphor for Near-UV-LED-Based Solid-State Lighting
Luminescent properties of -co-doped under near-UV light excitation have been investigated. shows efficient red emission at and is about 1.7 times higher than in photoluminescence (PL) peak intensity under light excitation. Meanwhile, -co-doped is over 5 times higher than in PL peak intensity under light excitation. These results imply that -co-doped is a candidate of red phosphors for near-UV light-emitting diodes (LEDs), though the co-doping causes an increase in thermal quenching of PL.
- 1 January 2007
- Published by The Electrochemical Society in Electrochemical and Solid-State Letters
- Vol. 10 (10) , J139-J142
Photoluminescent Properties of (La,Eu,Sm)[sub 2]W[sub 3]O[sub 12] Red Phosphor for Near-UV-LED-Based Solid-State Lighting
Luminescent properties of -co-doped under near-UV light excitation have been investigated. shows efficient red emission at and is about 1.7 times higher than in photoluminescence (PL) peak intensity under light excitation. Meanwhile, -co-doped is over 5 times higher than in PL peak intensity under light excitation. These results imply that -co-doped is a candidate of red phosphors for near-UV light-emitting diodes (LEDs), though the co-doping causes an increase in thermal quenching of PL.
- 1 January 2002
- Published by Wiley in Physica Status Solidi (b)
- Vol. 229 (1) , 481-484
Fabrication and Optical Characterization of Trivalent-Rare-Earth Doped CdS Nanocrystals
- 1 January 2002
- Published by Wiley in Physica Status Solidi (b)
- Vol. 229 (1) , 481-484
Fabrication and Optical Characterization of Trivalent-Rare-Earth Doped CdS Nanocrystals