HAHarry R. Allcock

Harry R. Allcock

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Harry R. Allcock has a total of 70 co-authors. Here are the top co-authors by number of shared publications:

  • Xiao Liu

    Department of Chemistry The Pennsylvania State University, University Park Pennsylvania 16802

    9 shared publications
  • Chen Chen

    Department of Chemistry, Pennsylvania State University, University Park, Pennsylvania 16802, United States

    8 shared publications
  • Zhicheng Tian

    Department of Chemistry The Pennsylvania State University, University Park Pennsylvania 16802

    8 shared publications
  • Nicole L. Morozowich

    The Pennsylvania State University, Department of Chemistry, University Park, PA 16802, USA

    7 shared publications
  • Cato T. Laurencin

    Department of Orthopedic Surgery, University of Connecticut Health Center, Farmington, Connecticut, USA

    4 shared publications
  • Lakshmi S. Nair

    Department of Orthopedic Surgery, University of Connecticut Health Center, Farmington, Connecticut, USA

    4 shared publications

Latest Publications

  • Deposition of calcium hydroxyapatite on negatively charged polyphosphazene surfaces

    by Tomasz Modzelewski, Ian Hotham, Harry R. Allcock

    A number of polyphosphazenes with negatively charged β‐alanine (β‐Ala) and γ‐amino butyric acid (GABA) side groups were synthesized and studied for their ability to initiate the growth of hydroxyapatite (HAp) during exposure to simulated body fluid (SBF). All the polymers were hydrolytically sensitive, with the final hydrolysis rate dependent on the specific active side groups (GABA > β‐Ala). These systems also underwent extensive mineralization, with calcium phosphate deposited across their entire surface during exposure to SBF (up to 115 wt % gain after 4 weeks). This degree of deposition is a major advance over previously reported polyphosphazene systems, which underwent a maximum of 27 wt % gain after immersion in SBF for 4 weeks. The extent of mineralization over the surface was monitored using environmental scanning electron microscopy (ESEM) coupled with energy dispersive X‐ray spectroscopy (EDS). In addition, X‐ray diffraction (XRD) was used to determine the identity of the mineralized material. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41741.


  • Characterization of hydroxyapatite deposition on biomimetic polyphosphazenes by time-of-flight secondary ion mass spectrometry (ToF-SIMS)

    by Nicole L. Morozowich, Jordan O. Lerach, Tomasz Modzelewski, Lauren Jackson, Nicholas Winograd, Harry R. Allcock

    Synthetic bone grafts that promote the natural mineralization process are excellent candidates for the repair and replacement of bone defects. In this study, a series of phosphoester and phosphonic acid containing polyphosphazenes were examined for their ability to mineralize hydroxyapatite (HAp) during exposure to a solution of simulated body fluid (SBF) for a period of four weeks. Although all the polymers showed an initial mineralization response, the amount of deposition and the time scale were dependent upon the side group chemistry of the polymers. After exposure to SBF for one week, all polymers mineralized HAp. After three weeks in SBF, polymers containing phosphoester substituents showed no significant change, with a weight gain of <1%, while polymers containing phosphonic acid substituents underwent a significant increase in the amount of mineralized HAp, with weight gains between 5–10%. The morphology of mineralized features was observed with Environmental Scanning Electron Microscopy (ESEM). However, due to the structural complexity of the mineralized polymers, the identity of the mineralized phase could not be definitively identified using traditional characterization techniques such as energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), or X-ray photoelectron spectroscopy (XPS). Time-of-flight secondary ion mass spectrometry (ToF-SIMS), a technique not previously explored for this type of application, successfully reveals details of the chemistry associated with the mineralized phase not possible to achieve with XRD analysis.


  • Generation of structural diversity in polyphosphazenes

    by Harry R. Allcock

    Polyphosphazenes are macromolecules with a chain of alternating phosphorus and nitrogen atoms and with two (usually) organic side groups linked to each phosphorus. Although the earliest poly(organophosphazenes) were essentially linear polymers each bearing only one type of side group along the chain, research in our program in recent years has widened the scope to include mixed‐substituent polymers with two or more different side groups, block copolymers, comb structures, stars, and dendrimers, all with a wide variety of different properties. In addition, supramolecular systems have also been synthesized including vesicles, microspheres, and a variety of composite systems. This review provides a summary of these developments together with an introduction to the widening array of developing uses. Copyright © 2013 John Wiley & Sons, Ltd.


  • Limits to expanding the PN‐F series of polyphosphazene elastomers

    by Zhicheng Tian, Xiao Liu, Abdellatif Manseri, Bruno Ameduri, Harry R. Allcock

    Mixed‐substituent fluoroalkoxyphosphazene polymers bearing ∼15% 1H,1H,2H,2H‐perfluorooctan‐1‐oxy or 1H,1H,2H,2H‐perfluorodecan‐1‐oxy side groups together with trifluoroethoxy cosubstituent groups were synthesized. The low reactivity of the long‐chain fluoroalkoxides and their limited solubility in organic solvents prevented higher levels of substitution. Moreover, the sodium alkoxides with two methylene residues adjacent to the oxygen proved to be unstable in solution due to elimination of NaF and precipitation of side products, and this limited the time available for chlorine replacement reactions. The resulting cosubstituent polymers were characterized by proton nuclear magnetic resonance (1H‐NMR), 31P‐NMR, 19F‐NMR, gel‐permeation chromatography, and differential scanning calorimetry. Unlike homo‐ or mixed‐substituent fluoroalkoxyphosphazene polymers, such as [NP(OCH2CF3)2]n (a microcrystalline thermoplastic, Tg ∼ −63°C, Tm ∼ 242°C) or [NP(OCH2CF3)(OCH2(CF2)xCF2H)]n (PN‐F, a rubbery elastomer, Tg ∼ −60°C, but no detectable Tm), the new polymers are gums (Tg ∼ −50°C, but no detectable Tm) with molecular weights in the 105 g/mol rather than the 106 g/mol range. POLYM. ENG. SCI., 54:1827–1832, 2014. © 2013 Society of Plastics Engineers


  • Biodegradable polyphosphazenes containing antibiotics: synthesis, characterization, and hydrolytic release behavior

    by Zhicheng Tian, Yufan Zhang, Xiao Liu, Chen Chen, Mark J. Guiltinan, Harry R. Allcock

    Novel polyphosphazenes containing the fluoroquinolone antibiotic substituents, ciprofloxacin or norfloxacin, were synthesized and characterized. Nano/microfibers of several selected polymers were prepared by an electrospinning technique. The sensitivity to hydrolysis, pH behavior, and antibiotic release profile of all the polymers as films and the selected polymers as nano/microfibers were investigated. The hydrolysis release behavior was further studied by an in vitro antibacterial test against E. coli. Protection and deprotection reactions of ciprofloxacin and norfloxacin were carried out before and after polymer synthesis to prevent cross-linking of multi-functional reagents with polymers. No more than 25 mol% of antibiotics can be introduced to poly(dichlorophosphazene) which was synthesized by a thermal ring opening polymerization of hexachlorocyclotriphosphazene. Various amino acid ethyl esters (glycine, alanine, and phenylalanine) were linked to the polymers as co-substituents to increase the solubility as well as to control the rate of antibiotic release. Depending on the polymer compositions, 5–23% weight loss and 4–30% antibiotic release were observed in a six week hydrolysis study at 37 °C. The corresponding nano/microfibers showed a much faster degradation and antibiotics release due to a substantially larger surface area. The in vitro antibacterial tests showed an antibacterial effect as long as ciprofloxacin or norfloxacin was released from the polymers. Meanwhile, all the polymers gave a near-neutral hydrolysis environment with the pH ranging from 5.9 to 6.8.


  • UV-cleavable unimolecular micelles: synthesis and characterization toward photocontrolled drug release carriers

    by Xiao Liu, Zhicheng Tian, Chen Chen, Harry R. Allcock

    UV-cleavable star polymers composed of a well-defined 6-arm amphiphilic block copolymer and a UV-cleavable core with photolabile o-nitrobenzyl groups have been synthesized and characterized. The core of the star polymer is a cyclotriphosphazene, which can biodegrade to phosphate and ammonium ion. The resultant unimolecular micelles can be dissociated in a controlled manner by UV irradiation. The inner lipophilic poly(methyl methacrylate) (PMMA) and the outer hydrophilic poly[poly(ethylene glycol) methyl ether methacrylate] (PPEGMA) were grafted by atom transfer radical polymerization (ATRP), leading to the formation of star-PMMA-PPEGMA with different compositions. The effects of various factors, such as molecular weight, solution concentration, solvents (THF, toluene, and water) and monomers (MMA, PEGMA, and 2-(dimethylamino)ethyl methacrylate (DMA)) on the photodegradation rate of the star polymers were studied by gel permeation chromatography (GPC). The micellar behavior of star-PMMA-PPEGMA was unambiguously demonstrated by dynamic light scattering (DLS), fluorescence techniques and transmission electron microscopy (TEM). The formation of nanoparticles (star-AGG) from the aggregation of the two star-PMMA-PPEGMA polymer micelles in aqueous solution was detected by DLS with hydrodynamic radii of 86 and 111 nm. The critical aggregation concentration (CAC) of star-AGG-2 from star-PMMA179-PPEGMA89-2 was 0.0026 g L−1 and 0.022 g L−1 before and after UV-irradiation indicating the reduced stability of the polymer micellar structures after UV-irradiation due to the detachment of the amphiphilic arms from the cyclotriphosphazene core. As a result, spontaneous dissociation of cleaved micelles can be induced by the dilution effect in the human body for stimulus-controlled drug release.


  • Biodegradable alanine and phenylalanine alkyl ester polyphosphazenes as potential ligament and tendon tissue scaffolds

    by Jessica L. Nichol, Nicole L. Morozowich, Harry R. Allcock

    New polyphosphazenes were designed, synthesized, and characterized to determine their potential as scaffolds for ligament and tendon tissue engineering. The carboxylic acid moiety of the amino acids L-alanine and L-phenylalanine were protected with alkyl esters with increasing chain length from 5 to 8 carbon atoms. This combined the hydrolytic sensitivity of the amino acid ester polyphosphazenes with the elastomeric characteristics induced by the long chain alkoxy polyphosphazenes. Test side group substitution reactions were performed on the cyclic small molecule model, hexachlorocyclotriphosphazene (NPCl2)3, to determine if steric hindrance would inhibit the degree of chlorine replacement by the amino acid ester units. Counterpart polymers were then synthesized by replacement of the chlorine atoms in poly(dichlorophosphazene) (NPCl2)n by the same amino acid esters. The glass transition temperatures of the polymers decreased with increasing alkyl ester chain length, ranging from 11.6 to −24.2 °C. Polymer hydrolysis was studied for solid samples in deionized water at physiological temperature for 12 weeks. The starting pH was 6.3 and the final pH ranged between 5.2 and 6.8. Polymer film mass decreased between ∼8.7 and 26 percent during the 12 week period, while the molecular weights decreased ∼57 to 99 percent.