TITetsuji Itoh

Tetsuji Itoh

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tetsuji Itoh has a total of 106 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Redefining Carbon Electrodes as Hierarchically Designable Reaction Fields for Electrochemical Biosensing

    by Hiroshi Yuzawa, Tetsuji Itoh, Thidarut Laochai, Nadnudda Rodthongkum, Hirotomo Nishihara

    Electrochemical biosensors based on carbon materials have achieved remarkable sensitivity, yet carbon electrodes are still often treated as black‐box conductive supports. In this perspective, we redefine carbon materials as hierarchically designable reaction fields in which defect chemistry, edge‐site termination, pore architecture, and electron‐transport pathways are integrated as explicit design variables, thereby providing a conceptual framework to guide the rational design of biosensor performance. We highlight how emerging analytical tools, including high‐temperature‐range temperature‐programmed desorption and solid‐state NMR, enable direct correlation of carbon structure with interfacial functions relevant to molecular recognition, charge storage, and signal transduction. We further discuss recent studies showing that rational control of particle morphology, active‐site arrangement, and transparent electrode architectures can improve not only sensitivity but also response stability, signal discrimination, and multimodal readout, highlighting a design direction in which biosensor performance emerges from the integrated engineering of reaction fields rather than isolated material properties. This framework shifts carbon‐biosensor development from empirical optimization toward structure‐guided design for reproducible and practical sensing in complex samples.

  • Open Access

    Porous Membrane Adsorption for Capturing Small Extracellular Vesicles Enables Accessible Single-Particle Analysis

    by Masahiro Okada, Yusuke Sato, Tetsuji Itoh, Seiichi Nishizawa

    Quantitative analysis of small extracellular vesicles (sEVs) at single-particle resolution remains challenging due to their nanoscale dimensions and compositional heterogeneity. Existing methods often rely on specialized and costly instrumentation, limiting accessibility for many researchers and necessitating extensive optimization. Here, we present a porous membrane adsorption for capturing small vesicles (PMACS), which employs a porous anodized aluminum oxide (AAO) membrane as nanoscale compartments to spatially isolate individual vesicles. This allows accessible single-particle discrimination using standard wide-field fluorescence microscopy without either advanced equipment or expert skills. Single-particle discrimination is achieved based on the principle that AAO membranes accommodate vesicles at most one particle per pore according to Poisson distribution and that occupied pores are sufficiently separated beyond the optical resolution limit, which ensures reliable attribution of fluorescent spots to individual vesicles. PMACS achieves reliable quantification of culture cell-derived sEVs across a broad dynamic range (103 to 106 particles/μL). This performance exceeds conventional methods without the need for either advanced instrumentation or expert operation. We demonstrate that PMACS allows colocalization analysis of sEV cargos by assessing the tetraspanin (CD9, CD63, and CD81) population of cultured cell-derived sEVs (Hela, A549, and HEK293T cell lines). The heterogeneous protein expressions on sEVs are visualized by means of a simple facile setup. Owing to its simplicity, sensitivity, and accessibility, PMACS provides a practical platform to advance studies of sEV heterogeneity and broaden participation in sEV science.

  • Open Access

    Degradation pathway of FAPbI 3 perovskites: oxidation of formamidinium molecules

    by Naoyuki Nishimura, Siby Mathew, Ayumi Ikeda, Yasuhisa Hasegawa, Takurou N. Murakami, Tetsuji Itoh

    A potential degradation pathway of formamidinium-lead-iodide (FAPbI 3 ) perovskites is suggested by in situ measurements: oxidation of the unsaturated CN bonding in the FA molecules in the presence of oxygen molecules at elevated temperatures.

  • Quinone-Based Mediator Immobilized Mesoporous Electrodes for Bioelectrocatalysis of Glucose Dehydrogenase

    by Kota Takeda, Yuka Minegishi, Sean-Thomas B. Lundin, Akiko Yoshida, Yuta Nishina, Hirotomo Nishihara, Tetsuji Itoh

    Bioelectrocatalysis, which couples enzymatic catalytic and electrode reactions, is the basic principle behind enzyme electrochemical biosensors, biofuel cells, and bioelectrosynthesis systems. Electron mediators facilitate the transfer of electrons between electrodes and oxidoreductases during catalytic reactions, so ideally the mediator remains near the electrode for higher catalytic efficiency. Additionally, electrode materials with three-dimensional space at the enzyme volume mesoscale are expected to improve electrode performance (e.g., increased current density and stability). In previous work, we developed graphene-coated porous silica spheres (G/PSS), which are mesoporous structures filled with conductive carbon microparticles, and then screen-printed G/PSS onto an electrode to form a hierarchical space using the accumulated particles. In this work, we take advantage of this hierarchical space to immobilize a mediator, quinoline-5,8-dione (QD), on a G/PSS electrode. Despite the low potential of QD (-0.075 V vs Ag|AgCl 3 M NaCl, at pH 7.0), it has been shown to be an excellent mediator due to its high reactivity with flavin adenine dinucleotide- or pyrroloquinoline quinone (PQQ)-dependent oxidoreductases. However, applications using QD remain challenging due to its high solubility, which results in fast dissolution of adsorbed QD on a conventional electrode. To solve this issue, we have successfully immobilized the QD to suppress its desorption and dissolution, by simply drying and adsorbing QD onto a G/PSS electrode. This electrode shows significantly improved long-term stability and reusability, while remaining simple to fabricate. Furthermore, we successfully fabricated an enzyme electrode by immobilizing PQQ-dependent glucose dehydrogenase onto a QD-immobilized G/PSS electrode. This method demonstrates that electron transfer does not require free mediator movement and that immobilized QD mediators within pores likely function by allowing localized electron transfer between enzymes and the electrode. The developed technique of immobilizing mediators onto a mesoporous carbon material is expected to be a versatile technique for other enzyme electrode applications.


  • Environmentally Sustainable, Noble-Metal-free Enzyme Sensors Capable of Functioning in the Presence of Ascorbic Acid

    by Akiko Yoshida, Zheng-Ze Pan, Mutsuhiro Ito, Kenichi Izawa, Yuka Minegishi, Yusuke Sakuda, Yukinori Noguchi, Yasuhisa Hasegawa, Tetsuji Itoh, Hirotomo Nishihara


  • Open Access

    Multifunctional Phosphonic Acid-Based Passivation: A Pathway to Enhance Efficiency and High-Temperature Durability in FAPbI3 Perovskite Solar Cells

    by Siby Mathew, Naoyuki Nishimura, Atsushi Kogo, Tetsuji Itoh, Kohei Yamamoto, Yoyo Hinuma, Takurou N. Murakami


  • (Invited) Development of Biosensors Based on Graphene-Coated Porous Silica Spheres

    by Tetsuji Itoh

    During the onset of the COVID-19 pandemic, the public was reminded of how quickly routine diagnostic tests could overwhelm the health-care system when no other options are available. As mass adoption of the at-home rapid tests were developed and accepted thereby relieving the first responders to care for more critically ill patients, it sparked a resurgence of interest in affordable point-of-care (POC) diagnostics. Currently, besides a handful of common POC devices (e.g., glucose sensor, pregnancy tests and COVID test) there are not many commercially successful examples due to complex design, high production costs, and material stability for field deployment. In this study, we demonstrate that graphene coated porous silica spheres (G/PSS) can be a simple and affordable material for target sensing. Porous carbons particles are low-cost materials widely used as electrode materials in applications such as electric double layer capacitors, batteries, biofuel cells, and biosensors. In the above applications, the non-uniformity of the particles does not interfere with their performance. However, for target sensing, the reduction of noise is generally achieved by working with uniform material. In our case, we developed a method to synthesize uniformly coated graphene on uniformly sized porous silica. The triple pore structure and increased surface area enable, the diffusion of enzymes, mediators, and substrates for rapid enzyme electrode reactions - the mesopores provide a reaction field, the micropores trapping mediators, and the macropores providing substrate, mediator, and enzyme diffusion. Of particular interests to the audience are three key areas: 1) the development of porous silica spheres with controllable particle size and pore size, 2) the graphene chemistry to deposit graphene on to the particles as developed and 3) fine-tuned by our group for this application, and the fabrication technical to prepare electrodes using screen-printing. We succeeded in developing a sensor chip with G/PSS arranged on the surface with high efficiency by selecting a mediator that can smoothly transfer electrons to and from the carbon, which enables various sensing applications. Furthermore, to expand the portfolio of new and improved components that increase the field usability of POC diagnostic devices, we demonstrate that Prussian blue (PB) dispersed in G/PSS functions as an effective and affordable reference electrode as a promising alternative to industry standards. The solubility product of PB is approximately only 1/1031 of that of AgCl, rendering PB a water-insoluble electrode that is free from metal leaching in small devices. The support material, G/PSS, provides conductive mesopores that accommodate insulating PB clusters, ensuring effective contact between the PB clusters and electrolytes and stable potential. Furthermore, the monodisperse spherical shape of G/PSS is beneficial for the production of a reference electrode for POC devices through a low-cost, highly reproducible screen-printing process. This study successfully demonstrated the feasibility and stability of the prototype small biosensor, opening the door for future improvements in the device’s ability to perform similar sensing in complex media such as biological samples.

  • Contamination-Free Reference Electrode Using Prussian Blue for Small Oxygen Sensors

    by Akiko Yoshida, Kritin Pirabul, Shunsuke Fujii, Zheng-Ze Pan, Takeharu Yoshii, Mutsuhiro Ito, Kenichi Izawa, Yuka Minegishi, Yukinori Noguchi, Norihito Hiyoshi, et al.

    In recent years, significant attention has been directed toward advancing compact, point-of-care testing (POCT) devices to better deliver patient care and alleviate the burden on the medical care system. Common POCTs, such as blood oxygen sensors, leverage electrochemical sensing in their design. However, conventional electrochemical devices typically use Ag/AgCl reference electrodes, which are likely to release trace amounts of silver ions that contaminate the working electrode, causing rapid deterioration of the devices. This study proposes an effective reference electrode using graphene-coated porous silica spheres (G/PSS) with embedded Prussian blue (PB), denoted PB/G/PSS, designed specifically for small oxygen sensors. PB is a redox species that is an improvement over Ag/AgCl since it is significantly less water-soluble than AgCl. Since PB is an insulator, we dispersed PB in G/PSS, well-conductive mesoporous matrices, to ensure contact between PB clusters and the electrolytes. Moreover, the monodispersed, spherically shaped PB/G/PSS is an advantageous medium for fabricating POCT devices by screen printing. In this study, the open-circuit potential of the PB/G/PSS electrode remained stable within 30 mV for 31 days. The small oxygen sensor assembled through screen printing using PB/G/PSS demonstrated stable operation for several days or more. In contrast, a similar sensor with Ag/AgCl reference electrode rapidly deteriorated within a day. This PB/G/PSS reference electrode with improved stability is expected to be an excellent alternative to the Ag/AgCl system for small electrochemical-based POCT devices.


  • Carbon-coated anodic aluminum oxide: Synthesis, characterization, and applications

    by Hongyu Liu, Zheng-Ze Pan, Tetsuji Itoh, Takashi Kyotani, Hirotomo Nishihara

    Ordered porous carbon materials with regularly arranged pores and adjustable pore sizes have attracted significant attention due to their versatile applications across various fields. In this context, uniform carbon coating of anodic aluminum oxide (AAO) membranes is an effective approach to fabricating an ordered array of cylindrical carbonaceous nanopores with adjustable pore diameter and length. The resulting carbon-coated AAO (C/AAO) composite exhibits a meticulously ordered array of meso/macropores, devoid of inter-particle pores and resistance, setting it apart from conventional ordered porous carbons with powder forms. The pore dimensions of C/AAO can be precisely controlled over a wide range, and the carbon chemistry can be customized through heteroatom doping and chemical modifications, all without altering the pore structure. These inherent advantages position C/AAO as a highly promising material with broad application prospects. This review article provides a comprehensive overview of the synthesis and characterization of C/AAO and related materials, along with their diverse utilization in the fields of optics, field emission, gas sensing, energy storage, electrocatalyst support, and bionics. Furthermore, an outlook on the C/AAO materials is given at the end, highlighting their potential and associated challenges.