Jürgen Puls
Research Subjects
Jürgen Puls has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Bodo Saake
Institute for Wood Chemistry and Chemical Technology of Wood
5 shared publicationsClemens Altaner
Institute of Wood Chemistry and Chemical Technology of Wood, Federal Research Centre of Forestry and Forest Products, D-21001 Hamburg, Germany
3 shared publicationsRon Janzon
Institute for Wood Chemistry and Chemical Technology of Wood
2 shared publicationsArmin Stein
1 shared publicationCraig B Faulds
Food Materials Science Division, Institute of Food Research, Colney, Norwich NR4 7UA, UK
1 shared publicationJaime Eyzaguirre
Facultad de Ciencias Biológicas, Pontificia Universidad Católica de Chile, Santiago, Chile and Universidad Nacional Andrés Bello, Santiago, Chile
1 shared publication
Latest Publications
- 20 August 2007
- Published by Springer Nature in Cellulose
- Vol. 15 (1) , 161-175
Upgrading of paper-grade pulps to dissolving pulps by nitren extraction: properties of nitren extracted xylans in comparison to NaOH and KOH extracted xylans
- 20 August 2007
- Published by Springer Nature in Cellulose
- Vol. 15 (1) , 161-175
Upgrading of paper-grade pulps to dissolving pulps by nitren extraction: properties of nitren extracted xylans in comparison to NaOH and KOH extracted xylans
- 1 December 2005
- Published by Wiley in Macromolecular Symposia
- Vol. 232 (1) , 85-92
Xylans from Oat Spelts and Birch Kraft Pulp
Two different approaches for the isolation of xylan from hemicellulose‐rich sources have been investigated: Alkaline extraction from roller‐mill pretreated oat spelts and Nitren extraction of birch kraft pulp. For xylan recovery from oat spelts the experiments included extraction with 5% NaOH at 90 °C, followed by precipitation in methanol or 2‐propanol without neutralisation in order to facilitate NaOH recovery. A subsequent peroxide bleaching yielded a product of approximately 90% ISO brightness. The work on Nitren extraction of birch kraft pulp included the optimisation of the extraction process with regard to the Nitren charge. Nitren was much more specific in xylan extraction compared to Cuen, and up to 90% of the xylan content of the birch kraft pulp could be removed. It turned out that dried pulps were superior for this process compared to never‐dried pulps, since substantial cellulose proportions in never‐dried pulps were also mobilised by Nitren treatment. The properties of the recovered xylans from both processes were compared with regard to molar mass and substitution. It could be demonstrated that more or less intact arabinoxylans with molar masses of 30,000 g/mol could be obtained from oat spelts. The arabinoxylans contained 8–10 mol‐% arabinofuranose and 2 mol‐% 4‐O‐methylglucuronic acid substituents. Nitren extraction of a birch kraft pulp yielded xylans of 9,400 and 11,200 g/mol. Only traces of 4‐O‐methyl‐glucuronic‐ and hexenuronic acid substituents could be found.
- 1 December 2005
- Published by Wiley in Macromolecular Symposia
- Vol. 232 (1) , 85-92
Xylans from Oat Spelts and Birch Kraft Pulp
Two different approaches for the isolation of xylan from hemicellulose‐rich sources have been investigated: Alkaline extraction from roller‐mill pretreated oat spelts and Nitren extraction of birch kraft pulp. For xylan recovery from oat spelts the experiments included extraction with 5% NaOH at 90 °C, followed by precipitation in methanol or 2‐propanol without neutralisation in order to facilitate NaOH recovery. A subsequent peroxide bleaching yielded a product of approximately 90% ISO brightness. The work on Nitren extraction of birch kraft pulp included the optimisation of the extraction process with regard to the Nitren charge. Nitren was much more specific in xylan extraction compared to Cuen, and up to 90% of the xylan content of the birch kraft pulp could be removed. It turned out that dried pulps were superior for this process compared to never‐dried pulps, since substantial cellulose proportions in never‐dried pulps were also mobilised by Nitren treatment. The properties of the recovered xylans from both processes were compared with regard to molar mass and substitution. It could be demonstrated that more or less intact arabinoxylans with molar masses of 30,000 g/mol could be obtained from oat spelts. The arabinoxylans contained 8–10 mol‐% arabinofuranose and 2 mol‐% 4‐O‐methylglucuronic acid substituents. Nitren extraction of a birch kraft pulp yielded xylans of 9,400 and 11,200 g/mol. Only traces of 4‐O‐methyl‐glucuronic‐ and hexenuronic acid substituents could be found.
- 1 March 2004
- Published by Wiley in Macromolecular Symposia
- Vol. 208 (1) , 239-254
4.3 Degradation and modification of cellulose acetates by biological systems
A survey is given on recent findings in the enzymology of cellulose acetate degradation. Acetyl esterases have been identified as the principal enzymes, initiating cellulose acetate degradation as a prerequisite for endoglucanase‐catalyzed cellulose acetate depolymerisation. Acetyl esterases are provided by nature to deacetylate naturally occurring partly acetylated polysaccharides, i.e. xylan and chitin. Accordingly they are not designed to attack high DS cellulose acetate. Under these circumstances acetyl esterases require a pretreatment of cellulose acetate, leading to some reduction in DS, in case highly substituted material should be degraded. One of these treatments is composting under the conditions of which a partial deacetylation may occur under the action of heat and high pH, facilitating the accessibility for acetyl esterases. However from the present knowledge it cannot be excluded that certain microbial specialists exist, being capable to degrade high DS cellulose acetate.
- 1 March 2004
- Published by Wiley in Macromolecular Symposia
- Vol. 208 (1) , 239-254
4.3 Degradation and modification of cellulose acetates by biological systems
A survey is given on recent findings in the enzymology of cellulose acetate degradation. Acetyl esterases have been identified as the principal enzymes, initiating cellulose acetate degradation as a prerequisite for endoglucanase‐catalyzed cellulose acetate depolymerisation. Acetyl esterases are provided by nature to deacetylate naturally occurring partly acetylated polysaccharides, i.e. xylan and chitin. Accordingly they are not designed to attack high DS cellulose acetate. Under these circumstances acetyl esterases require a pretreatment of cellulose acetate, leading to some reduction in DS, in case highly substituted material should be degraded. One of these treatments is composting under the conditions of which a partial deacetylation may occur under the action of heat and high pH, facilitating the accessibility for acetyl esterases. However from the present knowledge it cannot be excluded that certain microbial specialists exist, being capable to degrade high DS cellulose acetate.
- 9 October 2003
- Published by Elsevier in Journal of Biotechnology
- Vol. 105 (1-2) , 95-104
Regioselective deacetylation of cellulose acetates by acetyl xylan esterases of different CE-families
- 9 October 2003
- Published by Elsevier in Journal of Biotechnology
- Vol. 105 (1-2) , 95-104
Regioselective deacetylation of cellulose acetates by acetyl xylan esterases of different CE-families
- 1 March 2003
- Published by Springer Nature in Cellulose
- Vol. 10 (1) , 85-95
Specificity of an Aspergillus Niger Esterase Deacetylating Cellulose Acetate
- 1 March 2003
- Published by Springer Nature in Cellulose
- Vol. 10 (1) , 85-95
Specificity of an Aspergillus Niger Esterase Deacetylating Cellulose Acetate