Ruth M. Hall
Research Subjects
Research Interests
Ruth M. Hall has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
H. W. Stokes
CSIRO Molecular Science, North Ryde, New South Wales 2113,1 and Department of Biological Sciences, Macquarie University, Sydney, New South Wales 2109,2 Australia
6 shared publicationsChristina M. Collis
CSIRO Molecular Science, Sydney Laboratory, North Ryde, New South Wales 1670, Australia
4 shared publicationsGavin D. Recchia
CSIRO Molecular Science, North Ryde, New South Wales 2113,1 and Department of Biological Sciences, Macquarie University, Sydney, New South Wales 2109,2 Australia
4 shared publicationsSally R. Partridge
CSIRO Molecular Science, North Ryde, New South Wales 2113, Australia
4 shared publicationsHeidi J. Brown
CSIRO Molecular Science, North Ryde, New South Wales 2113
2 shared publicationsCarol Scaramuzzi
School of Biological Sciences, Macquarie University Sydney, NSW 2109, Australia2
1 shared publication
Latest Publications
- 1 May 2002
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 46 (5) , 1288-94
Characterization and Movement of the Class 1 Integron Known as Tn 2521 and Tn 1405
Two putative transposons, Tn 2521 and Tn 1405 , carrying determinants for the PSE-4 β-lactamase and for resistance to streptomycin, spectinomycin, and sulfonamides were previously isolated from the chromosome of Pseudomonas aeruginosa Dalgleish. Detailed mapping and determination of the complete sequence of Tn 2521 revealed that it is a class 1 integron, here renamed In33, with a backbone structure identical to that of In4 from Tn 1696 . In33 contains two gene cassettes, blaP1 and aadA1 , replacing the aacC1 -orfE- aadA2 - cmlA1 cassette array in In4. Although In33 does not include any transposition genes, movement of In33 (Tn 2521 ) targeted to a single location in the IncP-1 plasmid R18-18 has been reported previously (M. I. Sinclair and B. W. Holloway, J. Bacteriol. 151:569-579, 1982). A 5-bp duplication of the target, which lies within the res site recognized by the ParA resolvase of R18-18, was present, indicating that the mechanism of movement was transposition. Together, these data indicate that class 1 integrons that are defective in self-transposition can move under appropriate circumstances. The Tn 1405 isolate studied was found to represent only the cassette array of In33, which had replaced the cassette array in the recipient plasmid R388, probably by homologous recombination.
- 1 May 2002
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 46 (5) , 1288-94
Characterization and Movement of the Class 1 Integron Known as Tn 2521 and Tn 1405
Two putative transposons, Tn 2521 and Tn 1405 , carrying determinants for the PSE-4 β-lactamase and for resistance to streptomycin, spectinomycin, and sulfonamides were previously isolated from the chromosome of Pseudomonas aeruginosa Dalgleish. Detailed mapping and determination of the complete sequence of Tn 2521 revealed that it is a class 1 integron, here renamed In33, with a backbone structure identical to that of In4 from Tn 1696 . In33 contains two gene cassettes, blaP1 and aadA1 , replacing the aacC1 -orfE- aadA2 - cmlA1 cassette array in In4. Although In33 does not include any transposition genes, movement of In33 (Tn 2521 ) targeted to a single location in the IncP-1 plasmid R18-18 has been reported previously (M. I. Sinclair and B. W. Holloway, J. Bacteriol. 151:569-579, 1982). A 5-bp duplication of the target, which lies within the res site recognized by the ParA resolvase of R18-18, was present, indicating that the mechanism of movement was transposition. Together, these data indicate that class 1 integrons that are defective in self-transposition can move under appropriate circumstances. The Tn 1405 isolate studied was found to represent only the cassette array of In33, which had replaced the cassette array in the recipient plasmid R388, probably by homologous recombination.
- Open Access
- 1 November 2001
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 45 (11) , 2319-2326
Family of Class 1 Integrons Related to In4 from Tn 1696
The class 1 integron In28, found in the multidrug resistance transposon Tn 1403 , was found to be located in the res site of the backbone transposon and is flanked by a 5-bp direct duplication, indicating that it reached this position by transposition. In28 has a backbone structure related to that of In4, but has lost internal sequences, including the sul1 gene, due to an IS 6100 -mediated deletion. In28 also lacks the partial copy of IS 6100 found in In4 and contains different gene cassettes, blaP1, cmlA1, and aadA1 . In1, the class 1 integron found in the multidrug resistance plasmid R46, is also located in a putative res site and belongs to the In4 group. In1 has a shorter internal deletion than In28 and has also lost one end. Additional integrons with structures related to In4 were also found in databases, and most of them had also lost either one end or internal regions or both. Tn 610 belongs to this group.
- 1 November 2001
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 45 (11) , 2319-2326
Open AccessFamily of Class 1 Integrons Related to In4 from Tn 1696
The class 1 integron In28, found in the multidrug resistance transposon Tn 1403 , was found to be located in the res site of the backbone transposon and is flanked by a 5-bp direct duplication, indicating that it reached this position by transposition. In28 has a backbone structure related to that of In4, but has lost internal sequences, including the sul1 gene, due to an IS 6100 -mediated deletion. In28 also lacks the partial copy of IS 6100 found in In4 and contains different gene cassettes, blaP1, cmlA1, and aadA1 . In1, the class 1 integron found in the multidrug resistance plasmid R46, is also located in a putative res site and belongs to the In4 group. In1 has a shorter internal deletion than In28 and has also lost one end. Additional integrons with structures related to In4 were also found in databases, and most of them had also lost either one end or internal regions or both. Tn 610 belongs to this group.
- 15 April 2001
- Published by American Society for Microbiology in Journal of Bacteriology
- Vol. 183 (8) , 2535-2542
Efficiency of Recombination Reactions Catalyzed by Class 1 Integron Integrase IntI1
The class 1 integron integrase, IntI1, recognizes two distinct types of recombination sites, attI sites, found in integrons, and members of the 59-be family, found in gene cassettes. The efficiencies of the integrative version of the three possible reactions, i.e., between two 59-be, between attI1 and a 59-be, or between two attI1 sites, were compared. Recombination events involving two attI1 sites were significantly less efficient than the reactions in which a 59-be participated, and the attI1 × 59-be reaction was generally preferred over the 59-be × 59-be reaction. Recombination of attI1 with secondary sites was less efficient than the 59-be × secondary site reaction.
- 15 April 2001
- Published by American Society for Microbiology in Journal of Bacteriology
- Vol. 183 (8) , 2535-2542
Efficiency of Recombination Reactions Catalyzed by Class 1 Integron Integrase IntI1
The class 1 integron integrase, IntI1, recognizes two distinct types of recombination sites, attI sites, found in integrons, and members of the 59-be family, found in gene cassettes. The efficiencies of the integrative version of the three possible reactions, i.e., between two 59-be, between attI1 and a 59-be, or between two attI1 sites, were compared. Recombination events involving two attI1 sites were significantly less efficient than the reactions in which a 59-be participated, and the attI1 × 59-be reaction was generally preferred over the 59-be × 59-be reaction. Recombination of attI1 with secondary sites was less efficient than the 59-be × secondary site reaction.
- 1 April 2001
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 45 (4) , 1263-70
Transposons Tn 1696 and Tn 21 and Their Integrons In4 and In2 Have Independent Origins
The first 13.6 kb of the mercury and multidrug resistance transposon Tn 1696 , which includes the class 1 integron In4, has been sequenced. In4 is 8.33 kb long and contains the 5′-conserved segment (5′-CS) and 2.24 kb of the 3′-conserved segment (3′-CS) flanking four integrated cassettes. The 3′-CS region is followed by one full copy and an adjacent partial copy of the insertion sequence IS 6100 flanked, in inverse orientation, by two short segments (123 and 152 bp) from the outer right-hand end of class 1 integrons. This structure is representative of a distinct group of class 1 integrons that differs from In2, found in Tn 21 , and other related class 1 integrons. In4 does not include transposition genes but is bounded by characteristic 25-bp inverted repeats and flanked by a direct duplication of 5 bp of the target sequence, indicating that it was inserted by a transpositional mechanism. In4 lies between the resII and resI sites of a backbone mercury resistance transposon which is >99.5% identical to Tn 5036 . Although Tn 21 and Tn 1696 are both classified as members of the Tn 21 subfamily of the Tn 3 transposon family, the backbone mercury resistance transposons are only 79 to 96% identical. Tn 21 also contains a region of about 0.7 kb not found in Tn 1696 . The integrons In2 and In4 carrying the antibiotic resistance genes have been inserted at different locations into distinct ancestral mercury resistance transposons. Thus, Tn 21 and Tn 1696 have independent histories and origins. Other transposons (Tn 1403 and Tn 1412 ) that include a class 1 integron also have independent origins. In all except Tn 21 , the integron is located within the res region of the backbone transposon.
- 1 April 2001
- Published by American Society for Microbiology in Antimicrobial Agents and Chemotherapy
- Vol. 45 (4) , 1263-70
Transposons Tn 1696 and Tn 21 and Their Integrons In4 and In2 Have Independent Origins
The first 13.6 kb of the mercury and multidrug resistance transposon Tn 1696 , which includes the class 1 integron In4, has been sequenced. In4 is 8.33 kb long and contains the 5′-conserved segment (5′-CS) and 2.24 kb of the 3′-conserved segment (3′-CS) flanking four integrated cassettes. The 3′-CS region is followed by one full copy and an adjacent partial copy of the insertion sequence IS 6100 flanked, in inverse orientation, by two short segments (123 and 152 bp) from the outer right-hand end of class 1 integrons. This structure is representative of a distinct group of class 1 integrons that differs from In2, found in Tn 21 , and other related class 1 integrons. In4 does not include transposition genes but is bounded by characteristic 25-bp inverted repeats and flanked by a direct duplication of 5 bp of the target sequence, indicating that it was inserted by a transpositional mechanism. In4 lies between the resII and resI sites of a backbone mercury resistance transposon which is >99.5% identical to Tn 5036 . Although Tn 21 and Tn 1696 are both classified as members of the Tn 21 subfamily of the Tn 3 transposon family, the backbone mercury resistance transposons are only 79 to 96% identical. Tn 21 also contains a region of about 0.7 kb not found in Tn 1696 . The integrons In2 and In4 carrying the antibiotic resistance genes have been inserted at different locations into distinct ancestral mercury resistance transposons. Thus, Tn 21 and Tn 1696 have independent histories and origins. Other transposons (Tn 1403 and Tn 1412 ) that include a class 1 integron also have independent origins. In all except Tn 21 , the integron is located within the res region of the backbone transposon.
- 1 November 2000
- Published by Microbiology Society in Microbiology
- Vol. 146 (11) , 2855-2864
Definition of the attI1 site of class 1 integrons
Integron-encoded integrases recognize two distinct types of recombination site: attI sites, found in integrons, and members of the 59-base element (59-be) family, found in the integron-associated gene cassettes. The class 1 integron integrase, IntI1, catalyses recombination between attI1 and a 59-be, two 59-be, or two attI1 sites, but events involving two attI1 sites are less efficient than the reactions in which a 59-be participates. The full attI1 site is required for high-efficiency recombination with a 59-be site. It is 65 bp in length and includes a simple site, consisting of a pair of inversely oriented IntI1-binding domains, together with two further directly oriented IntI1-binding sites designated strong and weak. However, a smaller region that contains only the simple site is sufficient to support a lower level of recombination with a complete attI1 partner and the features that determine the orientation of attI1 reside within this region. An unusual reaction between the attI1 site and a 59-be appears to be responsible for the loss of the central region of a 59-be to create a potential fusion of two adjacent gene cassettes.
- 1 November 2000
- Published by Microbiology Society in Microbiology
- Vol. 146 (11) , 2855-2864
Definition of the attI1 site of class 1 integrons
Integron-encoded integrases recognize two distinct types of recombination site: attI sites, found in integrons, and members of the 59-base element (59-be) family, found in the integron-associated gene cassettes. The class 1 integron integrase, IntI1, catalyses recombination between attI1 and a 59-be, two 59-be, or two attI1 sites, but events involving two attI1 sites are less efficient than the reactions in which a 59-be participates. The full attI1 site is required for high-efficiency recombination with a 59-be site. It is 65 bp in length and includes a simple site, consisting of a pair of inversely oriented IntI1-binding domains, together with two further directly oriented IntI1-binding sites designated strong and weak. However, a smaller region that contains only the simple site is sufficient to support a lower level of recombination with a complete attI1 partner and the features that determine the orientation of attI1 reside within this region. An unusual reaction between the attI1 site and a 59-be appears to be responsible for the loss of the central region of a 59-be to create a potential fusion of two adjacent gene cassettes.
- 1 July 1998
- Published by Wiley in Molecular Microbiology
- Vol. 29 (2) , 477-490
Binding of the purified integron DNA integrase IntI1 to integron‐ and cassette‐associated recombination sites
The site‐specific recombinase IntI1, encoded by class 1 integrons, catalyses the integration and excision of gene cassettes by recognizing two classes of sites, the integron‐associated attI1 site and the 59‐base element (59‐be) family of sites that are associated with gene cassettes. IntI1 includes the four conserved amino acids that are characteristic of members of the integrase family, and IntI1 proteins with single amino acid substitutions at each of these positions had substantially reduced catalytic activity, consistent with this classification. IntI1 was purified as a fusion protein and shown to bind to isolated attI1 or 59‐be recombination sites. Binding to attI1 was considerably stronger than to a 59‐be. Binding adjacent to the recombination cross‐over point was not detected. A strong IntI1 binding site within attI1 was localized by both deletion and footprinting analysis to a 14 bp region 24–37 bp to the left of the recombination cross‐over point, and this region is known to be critical for recombination in vivo (Recchia et al., 1994). An imperfect (13/15) direct repeat of this region, located 41–55 bp to the left of the recombination cross‐over point, contains a weaker IntI1 binding site. Mutation of the stronger binding site showed that a single base pair change accounted for the difference in the strength of binding.
- 1 July 1998
- Published by Wiley in Molecular Microbiology
- Vol. 29 (2) , 477-490
Binding of the purified integron DNA integrase IntI1 to integron‐ and cassette‐associated recombination sites
The site‐specific recombinase IntI1, encoded by class 1 integrons, catalyses the integration and excision of gene cassettes by recognizing two classes of sites, the integron‐associated attI1 site and the 59‐base element (59‐be) family of sites that are associated with gene cassettes. IntI1 includes the four conserved amino acids that are characteristic of members of the integrase family, and IntI1 proteins with single amino acid substitutions at each of these positions had substantially reduced catalytic activity, consistent with this classification. IntI1 was purified as a fusion protein and shown to bind to isolated attI1 or 59‐be recombination sites. Binding to attI1 was considerably stronger than to a 59‐be. Binding adjacent to the recombination cross‐over point was not detected. A strong IntI1 binding site within attI1 was localized by both deletion and footprinting analysis to a 14 bp region 24–37 bp to the left of the recombination cross‐over point, and this region is known to be critical for recombination in vivo (Recchia et al., 1994). An imperfect (13/15) direct repeat of this region, located 41–55 bp to the left of the recombination cross‐over point, contains a weaker IntI1 binding site. Mutation of the stronger binding site showed that a single base pair change accounted for the difference in the strength of binding.
- 1 January 1998
- Published by Elsevier in Drug Resistance Updates
- Vol. 1 (2) , 109-119
Antibiotic resistance in gram-negative bacteria: the role of gene cassettes and integrons
- 1 January 1998
- Published by Elsevier in Drug Resistance Updates
- Vol. 1 (2) , 109-119
Antibiotic resistance in gram-negative bacteria: the role of gene cassettes and integrons
- Open Access
- 1 November 1997
- Published by Wiley in Molecular Microbiology
- Vol. 26 (4) , 731-745
Structure and function of 59‐base element recombination sites associated with mobile gene cassettes
The integration of gene cassettes into integrons is effected by site‐specific recombination catalysed by an integrase, IntI, encoded by the integron. The cassette‐associated recombination sites, 59‐base elements, are not highly conserved and vary in length from 57 to 141 bp. They can be identified by their location and the relationship of over 20 bp at their outer ends to consensus sequences that are imperfect inverted repeats of one another. The recombination cross‐over occurs close to one end of the 59‐base element, within a conserved core site with the consensus sequence GTTAGGC or GTTRRRY. By introducing single‐base changes at each of these positions in the aadB 59‐base element, bases that are critical for site activity were identified. The recombination cross‐over was also localized to a unique position between the adjacent G and T residues. Changes introduced in the conserved AAC of the inverse core site (GCCTAAC or RYYYAAC) located at the opposite end of the 59‐base element also reduced site activity but to a lesser extent. Sequences of rare recombinants revealed an alternative position for strand exchange and led to the conclusion that 59‐base elements comprise two simple sites, analogous to those recognized by other integrases, with each simple site made up of a pair of inversely oriented IntI binding domains separated by a spacer of 7 or 8 bp. Re‐examination of the sequences of all known 59‐base elements revealed that this simple site configuration was present at both the left and right ends in all 59‐base elements. The identity of bases in the spacer is not required for efficient recombination and the cross‐over is located at one end of the spacer, suggesting that during IntI1‐mediated recombination only one strand exchange occurs.
- 1 November 1997
- Published by Wiley in Molecular Microbiology
- Vol. 26 (4) , 731-745
Open AccessStructure and function of 59‐base element recombination sites associated with mobile gene cassettes
The integration of gene cassettes into integrons is effected by site‐specific recombination catalysed by an integrase, IntI, encoded by the integron. The cassette‐associated recombination sites, 59‐base elements, are not highly conserved and vary in length from 57 to 141 bp. They can be identified by their location and the relationship of over 20 bp at their outer ends to consensus sequences that are imperfect inverted repeats of one another. The recombination cross‐over occurs close to one end of the 59‐base element, within a conserved core site with the consensus sequence GTTAGGC or GTTRRRY. By introducing single‐base changes at each of these positions in the aadB 59‐base element, bases that are critical for site activity were identified. The recombination cross‐over was also localized to a unique position between the adjacent G and T residues. Changes introduced in the conserved AAC of the inverse core site (GCCTAAC or RYYYAAC) located at the opposite end of the 59‐base element also reduced site activity but to a lesser extent. Sequences of rare recombinants revealed an alternative position for strand exchange and led to the conclusion that 59‐base elements comprise two simple sites, analogous to those recognized by other integrases, with each simple site made up of a pair of inversely oriented IntI binding domains separated by a spacer of 7 or 8 bp. Re‐examination of the sequences of all known 59‐base elements revealed that this simple site configuration was present at both the left and right ends in all 59‐base elements. The identity of bases in the spacer is not required for efficient recombination and the cross‐over is located at one end of the spacer, suggesting that during IntI1‐mediated recombination only one strand exchange occurs.