Francisco Javier Fernández
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Francisco Javier Fernández has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- José Díaz
Polytechnic School of Engineering, University of Oviedo, 33204 Gijón, Spain
6 shared publications - Inés Suárez
Polytechnic School of Engineering, University of Oviedo, C/Wifredo Ricart s/n, 33204 Gijón, Spain
3 shared publications - María Belén Folgueras
Department of Energy, University of Oviedo, School of Mining, Energy and Materials Engineering of Oviedo, 33004 Oviedo, Spain
2 shared publications - Bernd Langer
Karlsruhe University of Applied Sciences
1 shared publication - Borja Pérez
Polytechnic School of Engineering, University of Oviedo, 33204 Gijón, Spain
1 shared publication Frederic Foerster
1 shared publication
Latest Publications
- Open Access
- 31 July 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 111
The integration of heat pumps into the thermal systems of hospital facilities to advance their transformation towards Zero-Emission Buildings
- 31 July 2025
- Published by Elsevier in Journal of Building Engineering
- Vol. 111
Open AccessThe integration of heat pumps into the thermal systems of hospital facilities to advance their transformation towards Zero-Emission Buildings
- Open Access
- 14 May 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (10) , 4101
Energy Assessment of Alternative City Bus Lines: A Case Study in Gijón, Spain
The progressive substitution of traditional buses with electric ones in urban public transport constitutes a fundamental challenge towards sustainable mobility. This paper presents a methodological approach to assess energy consumption in urban bus networks, focusing on a city with varied topography and examining alternative bus lines for similar trips. Utilizing a quasi-static longitudinal model, real GPS data, and open access terrain models, the analysis aims to provide a nuanced understanding of energy performance, considering factors such as stop characteristics, gradients, and driving styles. The influence of driving style on commercial speed is observed to be modest, yet significant, in terms of energy efficiency. This research identifies the most advantageous line for transitioning from Internal Combustion Engine (ICE) to Electric Motor (EM) powertrains, resulting in a significant 68% reduction in energy consumption. Beyond specific line details, this methodology offers insights applicable to medium-sized cities, emphasizing efficient route prioritization and providing enhanced user information for informed decisions in the context of sustainable transportation solutions.
- 14 May 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (10) , 4101
Open AccessEnergy Assessment of Alternative City Bus Lines: A Case Study in Gijón, Spain
The progressive substitution of traditional buses with electric ones in urban public transport constitutes a fundamental challenge towards sustainable mobility. This paper presents a methodological approach to assess energy consumption in urban bus networks, focusing on a city with varied topography and examining alternative bus lines for similar trips. Utilizing a quasi-static longitudinal model, real GPS data, and open access terrain models, the analysis aims to provide a nuanced understanding of energy performance, considering factors such as stop characteristics, gradients, and driving styles. The influence of driving style on commercial speed is observed to be modest, yet significant, in terms of energy efficiency. This research identifies the most advantageous line for transitioning from Internal Combustion Engine (ICE) to Electric Motor (EM) powertrains, resulting in a significant 68% reduction in energy consumption. Beyond specific line details, this methodology offers insights applicable to medium-sized cities, emphasizing efficient route prioritization and providing enhanced user information for informed decisions in the context of sustainable transportation solutions.
- Open Access
Conference proceedings KI4Industry AI for SMEs -- The online congress for practical entry into AI for SMEs
The Institute of Materials and Processes, IMP, of the University of Applied Sciences in Karlsruhe, Germany in cooperation with VDI Verein Deutscher Ingenieure e.V, AEN Automotive Engineering Network and their cooperation partners present their competences of AI-based solution approaches in the production engineering field. The online congress KI 4 Industry on November 12 and 13, 2020, showed what opportunities the use of artificial intelligence offers for medium-sized manufacturing companies, SMEs, and where potential fields of application lie. The main purpose of KI 4 Industry is to increase the transfer of knowledge, research and technology from universities to small and medium-sized enterprises, to demystify the term AI and to encourage companies to use AI-based solutions in their own value chain or in their products.
Open AccessConference proceedings KI4Industry AI for SMEs -- The online congress for practical entry into AI for SMEs
The Institute of Materials and Processes, IMP, of the University of Applied Sciences in Karlsruhe, Germany in cooperation with VDI Verein Deutscher Ingenieure e.V, AEN Automotive Engineering Network and their cooperation partners present their competences of AI-based solution approaches in the production engineering field. The online congress KI 4 Industry on November 12 and 13, 2020, showed what opportunities the use of artificial intelligence offers for medium-sized manufacturing companies, SMEs, and where potential fields of application lie. The main purpose of KI 4 Industry is to increase the transfer of knowledge, research and technology from universities to small and medium-sized enterprises, to demystify the term AI and to encourage companies to use AI-based solutions in their own value chain or in their products.
- Open Access
Stratification Analysis and Behaviour of a Real Industrial Thermocline Thermal Energy Storage Tank for Cogeneration Purposes
Thermal energy storage systems help to couple thermal energy generation and process demand in cogeneration facilities. One single deposit with two design temperatures and one main temperature step in sensible thermal energy storage define the thermocline systems. Performance of one high size real thermocline thermal energy storage system is analysed. Starting from temperature and mass flow rate data registered by the plant control system, one advanced thermodynamic analysis is performed. The quality of heat storage is analysed in terms of evaluation of the stratification in the thermocline zone. The temperature data registered at 21 positions is extended by displacement analysis generating detailed profiles. Fraction of recoverable heat, thermocline width, stratification indices based on energy and exergy analysis, and mean temperature gradients in the thermocline region are calculated. These parameters are monitored under real operation conditions of the plant. The calculated parameters are studied to check their distribution and correlation. First and Second Law indices show parallel behaviour and two values are found that delimit situations of high and low values of mean temperature gradients. It was observed that buoyancy generates uniform forced movement with the right water temperature entering the diffusers, but good control strategies are essential to avoid mixing. The system demonstrated great stability in this use.
Open AccessStratification Analysis and Behaviour of a Real Industrial Thermocline Thermal Energy Storage Tank for Cogeneration Purposes
Thermal energy storage systems help to couple thermal energy generation and process demand in cogeneration facilities. One single deposit with two design temperatures and one main temperature step in sensible thermal energy storage define the thermocline systems. Performance of one high size real thermocline thermal energy storage system is analysed. Starting from temperature and mass flow rate data registered by the plant control system, one advanced thermodynamic analysis is performed. The quality of heat storage is analysed in terms of evaluation of the stratification in the thermocline zone. The temperature data registered at 21 positions is extended by displacement analysis generating detailed profiles. Fraction of recoverable heat, thermocline width, stratification indices based on energy and exergy analysis, and mean temperature gradients in the thermocline region are calculated. These parameters are monitored under real operation conditions of the plant. The calculated parameters are studied to check their distribution and correlation. First and Second Law indices show parallel behaviour and two values are found that delimit situations of high and low values of mean temperature gradients. It was observed that buoyancy generates uniform forced movement with the right water temperature entering the diffusers, but good control strategies are essential to avoid mixing. The system demonstrated great stability in this use.
- Open Access
Application of Combined Developments in Processes and Models to the Determination of Hot Metal Temperature in BOF Steelmaking
Nowadays, the steel industry is seeking to reduce its carbon footprint without affecting productivity or profitability. This challenge needs to be supported by continuous improvements in equipment, methods, sensors and models. The present work exposes how the combined development of processes and models (CDPM) has been applied to the improvement of hot metal temperature determination. The synergies that arise when both sides of this research are simultaneously approached are evidenced. A workflow that takes into account the CDPM approach is proposed. First, a thermal model of the process is developed, making it possible to identify that hot metal temperature is a key lever for carbon footprint reduction. Then, three main alternatives for hot metal temperature determination are compared: infrared thermometry, time-series forecasting and machine learning prediction. Despite considering only few process variables, machine learning techniques succeed in extracting relevant information from process databases. An accuracy close to infrared thermometry is obtained, with a much higher applicability. This research shows that process-model alternatives are complementary when judiciously nested in the process computer routines. Combining measurement and modelling techniques, 100% applicability is achieved with an error reduction of 7 °C.
Open AccessApplication of Combined Developments in Processes and Models to the Determination of Hot Metal Temperature in BOF Steelmaking
Nowadays, the steel industry is seeking to reduce its carbon footprint without affecting productivity or profitability. This challenge needs to be supported by continuous improvements in equipment, methods, sensors and models. The present work exposes how the combined development of processes and models (CDPM) has been applied to the improvement of hot metal temperature determination. The synergies that arise when both sides of this research are simultaneously approached are evidenced. A workflow that takes into account the CDPM approach is proposed. First, a thermal model of the process is developed, making it possible to identify that hot metal temperature is a key lever for carbon footprint reduction. Then, three main alternatives for hot metal temperature determination are compared: infrared thermometry, time-series forecasting and machine learning prediction. Despite considering only few process variables, machine learning techniques succeed in extracting relevant information from process databases. An accuracy close to infrared thermometry is obtained, with a much higher applicability. This research shows that process-model alternatives are complementary when judiciously nested in the process computer routines. Combining measurement and modelling techniques, 100% applicability is achieved with an error reduction of 7 °C.
- Open Access
Hot Metal Temperature Forecasting at Steel Plant Using Multivariate Adaptive Regression Splines
Steelmaking has been experiencing continuous challenges and advances concerning process methods and control models. Integrated steelmaking begins with the hot metal, a crude liquid iron that is produced in the blast furnace (BF). The hot metal is then pre-treated and transferred to the basic lined oxygen furnace (BOF) for refining, experiencing a non-easily predictable temperature drop along the BF–BOF route. Hot metal temperature forecasting at the BOF is critical for the environment, productivity, and cost. An improved multivariate adaptive regression splines (MARS) model is proposed for hot metal temperature forecasting. Selected process variables and past temperature measurements are used as predictors. A moving window approach for the training dataset is chosen to avoid the need for periodic re-tuning of the model. There is no precedent for the application of MARS techniques to BOF steelmaking and a comparable temperature forecasting model of the BF–BOF interface has not been published yet. The model was trained, tested, and validated using a plant process dataset with 12,195 registers, covering one production year. The mean absolute error of predictions is 11.2 °C, which significantly improves those of previous modelling attempts. Moreover, model training and prediction are fast enough for a reliable on-line process control.
Open AccessHot Metal Temperature Forecasting at Steel Plant Using Multivariate Adaptive Regression Splines
Steelmaking has been experiencing continuous challenges and advances concerning process methods and control models. Integrated steelmaking begins with the hot metal, a crude liquid iron that is produced in the blast furnace (BF). The hot metal is then pre-treated and transferred to the basic lined oxygen furnace (BOF) for refining, experiencing a non-easily predictable temperature drop along the BF–BOF route. Hot metal temperature forecasting at the BOF is critical for the environment, productivity, and cost. An improved multivariate adaptive regression splines (MARS) model is proposed for hot metal temperature forecasting. Selected process variables and past temperature measurements are used as predictors. A moving window approach for the training dataset is chosen to avoid the need for periodic re-tuning of the model. There is no precedent for the application of MARS techniques to BOF steelmaking and a comparable temperature forecasting model of the BF–BOF interface has not been published yet. The model was trained, tested, and validated using a plant process dataset with 12,195 registers, covering one production year. The mean absolute error of predictions is 11.2 °C, which significantly improves those of previous modelling attempts. Moreover, model training and prediction are fast enough for a reliable on-line process control.
- Open Access
Hot Metal Temperature Prediction at Basic-Lined Oxygen Furnace (BOF) Converter Using IR Thermometry and Forecasting Techniques
In oxygen steelmaking, the charge calculation strongly depends on hot metal temperature prediction. Although a hot metal temperature drop from the blast furnace in a steel plant may be too complex to be accurately modeled in detail, the combined use of sensors and statistical models can improve temperature estimation and result in better cost, quality and productivity, as well as lower emissions. In order to develop a simple but robust method for hot metal temperature forecasting, the suitability of infrared thermometry and time series forecasting has been studied. Simultaneous infrared thermometer measurement and video recording was used for designing the processing of the thermometer signal. The resulting temperature estimations are in good agreement with disposable thermocouple measurements giving an error of 11 °C with 60% reliability (chances of obtaining a successful output). Conversely, the time series approach was based mainly on the AutoRegressive Integrated Moving Average (ARIMA) model in which five additional process variables were introduced as exogenous predictors, as well as using a moving window of past observations for continuous model training. The resulting error was 15 °C with more than 90% reliability. Combining measuring and modeling approaches reduced the error to 13 °C with 100% reliability, thereby providing a hybrid procedure that has long-term stability and is self-adaptive to varying production scenarios.
Open AccessHot Metal Temperature Prediction at Basic-Lined Oxygen Furnace (BOF) Converter Using IR Thermometry and Forecasting Techniques
In oxygen steelmaking, the charge calculation strongly depends on hot metal temperature prediction. Although a hot metal temperature drop from the blast furnace in a steel plant may be too complex to be accurately modeled in detail, the combined use of sensors and statistical models can improve temperature estimation and result in better cost, quality and productivity, as well as lower emissions. In order to develop a simple but robust method for hot metal temperature forecasting, the suitability of infrared thermometry and time series forecasting has been studied. Simultaneous infrared thermometer measurement and video recording was used for designing the processing of the thermometer signal. The resulting temperature estimations are in good agreement with disposable thermocouple measurements giving an error of 11 °C with 60% reliability (chances of obtaining a successful output). Conversely, the time series approach was based mainly on the AutoRegressive Integrated Moving Average (ARIMA) model in which five additional process variables were introduced as exogenous predictors, as well as using a moving window of past observations for continuous model training. The resulting error was 15 °C with more than 90% reliability. Combining measuring and modeling approaches reduced the error to 13 °C with 100% reliability, thereby providing a hybrid procedure that has long-term stability and is self-adaptive to varying production scenarios.
- Open Access
- 12 November 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1485
Study of the Architecture of a Smart City
In recent years, we are experiencing a digital revolution in many contexts, the digitalization of industry (Industry 4.0), the digitalization of public administrations, the digitalization of people and things (Internet of Things) and, of course, the digitization of cities under the name of Smart Cities. Although the digitization process is based on 3 main pillars: data, talent and innovation. It is necessary to make a mixture of these 3 pillars in different percentages to achieve digitization. In the case of cities, great weight lies in the technology deployed that makes up the architecture of the city. This technology is very incipient and lacks standards that allow interoperability between different devices. This article tries to show a picture of the possible architectures existing today from the point of view of sustainability and energy efficiency.
- 12 November 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1485
Open AccessStudy of the Architecture of a Smart City
In recent years, we are experiencing a digital revolution in many contexts, the digitalization of industry (Industry 4.0), the digitalization of public administrations, the digitalization of people and things (Internet of Things) and, of course, the digitization of cities under the name of Smart Cities. Although the digitization process is based on 3 main pillars: data, talent and innovation. It is necessary to make a mixture of these 3 pillars in different percentages to achieve digitization. In the case of cities, great weight lies in the technology deployed that makes up the architecture of the city. This technology is very incipient and lacks standards that allow interoperability between different devices. This article tries to show a picture of the possible architectures existing today from the point of view of sustainability and energy efficiency.
- Open Access
- 7 November 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1502
The Impact of Hot Metal Temperature on CO2 Emissions from BOF Steelmaking
Recycled steel is a key material for sustainable development. However, not all steel demand can be met by recycling, and therefore new metallic iron must be introduced in the global cycle. The transformation of iron oxides into steel requires carbon which is oxidized into CO2. This paper focuses on the basic oxygen furnace (BOF) where molten iron is transformed into liquid steel. The process is modelled using mass and energy balances in order to assess the effect of molten iron temperature on CO2 emissions. Model results show that, for a typical converter charge, a slight change of 10 °C in the hot metal temperature can led to a direct variation of 0.01 t of CO2 per ton of liquid steel. Finally, different actuation levers for carbon mitigation are suggested. It can be concluded that operation and modelling improvements should be jointly addressed to exploit their full potential for carbon footprint reduction.
- 7 November 2018
- Published by MDPI AG in Proceedings
- Vol. 2 (23) , 1502
Open AccessThe Impact of Hot Metal Temperature on CO2 Emissions from BOF Steelmaking
Recycled steel is a key material for sustainable development. However, not all steel demand can be met by recycling, and therefore new metallic iron must be introduced in the global cycle. The transformation of iron oxides into steel requires carbon which is oxidized into CO2. This paper focuses on the basic oxygen furnace (BOF) where molten iron is transformed into liquid steel. The process is modelled using mass and energy balances in order to assess the effect of molten iron temperature on CO2 emissions. Model results show that, for a typical converter charge, a slight change of 10 °C in the hot metal temperature can led to a direct variation of 0.01 t of CO2 per ton of liquid steel. Finally, different actuation levers for carbon mitigation are suggested. It can be concluded that operation and modelling improvements should be jointly addressed to exploit their full potential for carbon footprint reduction.