SBStefano Bigotta

Stefano Bigotta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefano Bigotta has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Triple-Clad Fiber Combiner for Holmium-Doped Fiber Lasers Clad-Pumping

    by Nicolas Dalloz, Stefano Bigotta, Thierry Ibach, Christophe Louot, Thierry Robin, Anne Hildenbrand-Dhollande

    The development of a high-power 7 × 1 triple-clad fiber combiner aimed at resonantly clad-pump holmium-doped fiber lasers is presented. Thanks to the implementation in the combiner of a low refractive index glass capillary, we show that the developed combiner is compatible with power scaling. Due to the hexagonal arrangement of its seven single-mode input fibers, the presented combiner can also be used in a 6 + 1 × 1 configuration. This characteristic of the fiber component allows for holmium-doped fiber lasers to be studied and developed with both single-oscillator and master-oscillator power amplifier architectures.


  • Resonantly pumped eye-safe Er3+:YAG SPS-HIP ceramic laser

    by S. Bigotta, L. Galecki, A. Katz, J. Böhmler, S. Lemonnier, E. Barraud, A. Leriche, M. Eichhorn

    We report for the first time laser action in resonantly-pumped transparent polycrystalline Er3+:YAG ceramic developed through a 2-step approach combining spark plasma sintering and HIP post treatment. Microstructural and spectroscopic properties, as well as the laser performance of large scale 0.5at.% Er:YAG transparent polycrystalline ceramic are discussed. A maximum slope efficiency of ∼31% and optical-optical efficiency of 20% was measured.


  • Open Access

    Novel non-planar ring cavity for enhanced beam quality in high-pulse-energy optical parametric oscillators

    by Stefano Bigotta, Georg Stöppler, Jörg Schöner, Martin Schellhorn, Marc Eichhorn

    A novel non-planar ring cavity is presented. It is shown that by using a fractional image rotation, i.e. a rotation whose angle cannot be expressed as 2π/n, where n is a small integer, the number of modes that can oscillate in the cavity is greatly reduced. This Fractional Image Rotation Enhancement (FIRE) cavity can thus be used to increase the beam quality in cases of low transversal mode discrimination, such as lasers with large pump and beam size and high-pulse-energy optical parametric oscillators (OPOs), especially when compactness and efficiency are key parameters. The experimental results obtained with a FIRE OPO for mid-IR (3–5 μm) generation based on a ZnGeP2 crystal pumped by a Ho3+:LiLuF4 MOPA system at 2.05 μm are compared to those realized with the same crystal and pump arrangement using a standard Rotated Image Singly-Resonant Twisted RectAngle (RISTRA) cavity. An increase of the beam quality from M2 of 2.08–2.29 to M2 of 1.88–1.99 is reached at 20 mJ pulse energy when the FIRE cavity is used.


  • Q-switched resonantly diode-pumped Er3+:YAG laser with fiberlike geometry.

    by Stefano Bigotta, Marc Eichhorn

    Crystalline fiberlike diode-pumped laser systems offer a convenient way to obtain compact, robust, and efficient operation whenever long active media are required. One of these cases is the diode-pumped Er3+:YAG laser emitting at 1.6μm, where long crystals are needed to avoid the upconversion processes. By resonantly pumping the I13/24 level around 1.53μm, and by confining the pump radiation into the crystal by total internal reflection, a maximum output power of 14.5W in cw mode is reached when pumped with ~40 W of absorbed power. In Q-switching mode, pulse energies of more than 8mJ were obtained at a repetition rate of 90Hz, limited by coating damage.