Zheng Peng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zheng Peng has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Lingxue Kong
Institute for Frontier Materials, Deakin University, Waurn Ponds, Geelong, Vic 3216, Australia
7 shared publications Yongyue Luo
Chinese Academy of Tropical Agricultural Sciences
4 shared publicationsChunfang Feng
Chinese Academy of Tropical Agricultural Sciences
3 shared publicationsPuwang Li
3 shared publicationsSi-Dong Li
College of Science, Guangdong Ocean University, Zhanjiang 524088, China
3 shared publicationsZhifeng Yi
Chinese Academy of Tropical Agricultural Sciences
3 shared publications
Latest Publications
- Open Access
- 1 January 2017
- Published by Atlantis Press SARL
Optimization of poly(vinyl chloride) concentration in aqueous solution and properties of dried film
- 1 January 2017
- Published by Atlantis Press SARL
Open AccessOptimization of poly(vinyl chloride) concentration in aqueous solution and properties of dried film
- 5 October 2013
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 28 (5) , 997-1002
Preparation and characterization of natural rubber/silica nanocomposites using rule of similarity in latex
- 5 October 2013
- Published by Springer Nature in Journal of Wuhan University of Technology-Mater. Sci. Ed.
- Vol. 28 (5) , 997-1002
Preparation and characterization of natural rubber/silica nanocomposites using rule of similarity in latex
- 16 September 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (47) , 25221-25230
Adsorption of Ponceau 4R from aqueous solutions using alkali boiled Tilapia fish scales
Tilapia fish scale, which facilitates both surface adsorption by hydroxyapatite and electrostatic interaction by collagen after boiling in alkaline environment, was used to prepare an adsorbent for the removal of the hazardous azo dye, Ponceau 4R. The prepared adsorbent was characterized by SEM, FT-IR and physical adsorption studies. Adsorption of Ponceau 4R by the prepared adsorbent was achieved under different initial Ponceau 4R concentrations, fish scale adsorbent doses, temperatures and pH conditions. The Freundlich isotherm model represented the experimental data very well. Kinetic studies indicated that the adsorption process followed the pseudo-second-order model and the theoretical maximum adsorption capacity of the fish scale adsorbent was 134.40 mg g−1. The adsorption thermodynamics study indicated that the adsorption process was a spontaneous and exothermic process.
- 16 September 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3 (47) , 25221-25230
Adsorption of Ponceau 4R from aqueous solutions using alkali boiled Tilapia fish scales
Tilapia fish scale, which facilitates both surface adsorption by hydroxyapatite and electrostatic interaction by collagen after boiling in alkaline environment, was used to prepare an adsorbent for the removal of the hazardous azo dye, Ponceau 4R. The prepared adsorbent was characterized by SEM, FT-IR and physical adsorption studies. Adsorption of Ponceau 4R by the prepared adsorbent was achieved under different initial Ponceau 4R concentrations, fish scale adsorbent doses, temperatures and pH conditions. The Freundlich isotherm model represented the experimental data very well. Kinetic studies indicated that the adsorption process followed the pseudo-second-order model and the theoretical maximum adsorption capacity of the fish scale adsorbent was 134.40 mg g−1. The adsorption thermodynamics study indicated that the adsorption process was a spontaneous and exothermic process.
- 1 August 2013
- Published by American Scientific Publishers in Journal of Biobased Materials and Bioenergy
- Vol. 7 (4) , 473-476
Preparation and Characterization of Novel Chitosan-Based Microcapsule Containing Patchouli Oil
- 1 August 2013
- Published by American Scientific Publishers in Journal of Biobased Materials and Bioenergy
- Vol. 7 (4) , 473-476
Preparation and Characterization of Novel Chitosan-Based Microcapsule Containing Patchouli Oil
- 15 May 2013
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 33 (4) , 331-335
Thermal degradation kinetics and mechanism of epoxidized natural rubber
Thermal resistance is one of the most dominative properties for polymer materials. Thermal degradation mechanisms of epoxidized natural rubber (ENR) and NR are studied by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The results show that, the introduction of epoxy groups into the NR molecular main chain leads to a remarkable change in the degradation mechanism. The thermal stability of ENR is worse than that of NR. For the first thermooxidative degradation stage, the thermal decomposition mechanism of ENR is similar to that of NR, which corresponds to a mechanism involving one-dimensional diffusion. For the second stage, the thermal decomposition mechanism of ENR is a three-dimensional diffusion, which is more complex than that of NR. Kinetic analysis showed that activation energy (Eα), activation entropy (ΔH) and activation Gibbs energy (ΔG) values are all positive, indicating that the thermooxidative degradation process of ENR is non-spontaneous.
- 15 May 2013
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 33 (4) , 331-335
Thermal degradation kinetics and mechanism of epoxidized natural rubber
Thermal resistance is one of the most dominative properties for polymer materials. Thermal degradation mechanisms of epoxidized natural rubber (ENR) and NR are studied by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The results show that, the introduction of epoxy groups into the NR molecular main chain leads to a remarkable change in the degradation mechanism. The thermal stability of ENR is worse than that of NR. For the first thermooxidative degradation stage, the thermal decomposition mechanism of ENR is similar to that of NR, which corresponds to a mechanism involving one-dimensional diffusion. For the second stage, the thermal decomposition mechanism of ENR is a three-dimensional diffusion, which is more complex than that of NR. Kinetic analysis showed that activation energy (Eα), activation entropy (ΔH) and activation Gibbs energy (ΔG) values are all positive, indicating that the thermooxidative degradation process of ENR is non-spontaneous.
- 29 February 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 125 (5) , 3920-3928
Natural rubber/multiwalled carbon nanotube composites developed with a combined self‐assembly and latex compounding technique
Carbon nanotubes (CNTs), with their high aspect ratio and exceptionally high mechanical properties, are excellent fillers for composite reinforcement if they are uniformly dispersed without aggregation. Combining the latex compounding and self‐assembly techniques, we prepared a novel natural rubber (NR)/multiwalled carbon nanotube (MWCNT) composite. Before self‐assembly, the MWCNTs were treated with mixed acid to ensure that the MWCNTs were negatively charged under an alkaline environment. The structure of the MWCNTs was tested with Fourier transform infrared spectroscopy. The properties of composites with different MWCNT loadings were characterized with transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and tensile testing. The results indicate that the MWCNTs were homogeneously distributed throughout the NR matrix as single tubes and had good interfacial adhesion with the NR phase when the MWCNT loading was less than 3 wt %. In particular, the addition of the MWCNT led to a remarkable reinforcement in the tensile strength, with a peak value of 31.4 MPa for an MWCNT content of 2 wt %, compared to the pure prevulcanized NR (tensile strength = 21.9 MPa). The nanocomposites reinforced with MWCNTs should have wide applications because of the notable improvement in these important properties. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
- 29 February 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 125 (5) , 3920-3928
Natural rubber/multiwalled carbon nanotube composites developed with a combined self‐assembly and latex compounding technique
Carbon nanotubes (CNTs), with their high aspect ratio and exceptionally high mechanical properties, are excellent fillers for composite reinforcement if they are uniformly dispersed without aggregation. Combining the latex compounding and self‐assembly techniques, we prepared a novel natural rubber (NR)/multiwalled carbon nanotube (MWCNT) composite. Before self‐assembly, the MWCNTs were treated with mixed acid to ensure that the MWCNTs were negatively charged under an alkaline environment. The structure of the MWCNTs was tested with Fourier transform infrared spectroscopy. The properties of composites with different MWCNT loadings were characterized with transmission electron microscopy, scanning electron microscopy, thermogravimetric analysis, and tensile testing. The results indicate that the MWCNTs were homogeneously distributed throughout the NR matrix as single tubes and had good interfacial adhesion with the NR phase when the MWCNT loading was less than 3 wt %. In particular, the addition of the MWCNT led to a remarkable reinforcement in the tensile strength, with a peak value of 31.4 MPa for an MWCNT content of 2 wt %, compared to the pure prevulcanized NR (tensile strength = 21.9 MPa). The nanocomposites reinforced with MWCNTs should have wide applications because of the notable improvement in these important properties. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
- Open Access
- 17 August 2011
- Published by Wiley in Journal of Nanomaterials
- Vol. 2012 (1)
Reinforcement of Natural Rubber with Core‐Shell Structure Silica‐Poly(Methyl Methacrylate) Nanoparticles
A highly performing natural rubber/silica (NR/SiO2) nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane‐coupling agent. The core‐shell structure silica‐poly(methyl methacrylate), SiO2‐PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2‐PMMA and PMMA‐modified NR (NR‐PMMA). The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.
- 17 August 2011
- Published by Wiley in Journal of Nanomaterials
- Vol. 2012 (1)
Open AccessReinforcement of Natural Rubber with Core‐Shell Structure Silica‐Poly(Methyl Methacrylate) Nanoparticles
A highly performing natural rubber/silica (NR/SiO2) nanocomposite with a SiO2 loading of 2 wt% was prepared by combining similar dissolve mutually theory with latex compounding techniques. Before polymerization, double bonds were introduced onto the surface of the SiO2 particles with the silane‐coupling agent. The core‐shell structure silica‐poly(methyl methacrylate), SiO2‐PMMA, nanoparticles were formed by grafting polymerization of MMA on the surface of the modified SiO2 particles via in situ emulsion, and then NR/SiO2 nanocomposite was prepared by blending SiO2‐PMMA and PMMA‐modified NR (NR‐PMMA). The Fourier transform infrared spectroscopy results show that PMMA has been successfully introduced onto the surface of SiO2, which can be well dispersed in NR matrix and present good interfacial adhesion with NR phase. Compared with those of pure NR, the thermal resistance and tensile properties of NR/SiO2 nanocomposite are significantly improved.
- 21 July 2011
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 21 (4) , 777-783
Interaction Between Fumed-Silica and Epoxidized Natural Rubber
- 21 July 2011
- Published by Springer Nature in Journal of Inorganic and Organometallic Polymers and Materials
- Vol. 21 (4) , 777-783
Interaction Between Fumed-Silica and Epoxidized Natural Rubber
- 25 July 2008
- Published by Wiley in Polymer Engineering & Science
- Vol. 48 (9) , 1674-1677
Natural rubber nanocomposite reinforced with nano silica
Inorganic nano fillers have demonstrated great potential to enhance the properties of natural rubber (NR). The present article reports the successful development of a NR nanocomposite reinforced with nano silica (SiO2). Its dynamic mechanical properties, thermal aging resistance, and morphology are investigated. The results show that the SiO2 nanoparticles are homogenously distributed throughout the NR matrix in a form of spherical nano‐cluster with an average size of 80 nm when the SiO2 content is 4 wt%. With the introduction of SiO2, the thermal resistance and the storage modulus of NR host significantly increase, and the activation energy of relaxation of the nanocomposite, compared to the raw NR, increases from 90.1 to 125.8 kJ/mol. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers
- 25 July 2008
- Published by Wiley in Polymer Engineering & Science
- Vol. 48 (9) , 1674-1677
Natural rubber nanocomposite reinforced with nano silica
Inorganic nano fillers have demonstrated great potential to enhance the properties of natural rubber (NR). The present article reports the successful development of a NR nanocomposite reinforced with nano silica (SiO2). Its dynamic mechanical properties, thermal aging resistance, and morphology are investigated. The results show that the SiO2 nanoparticles are homogenously distributed throughout the NR matrix in a form of spherical nano‐cluster with an average size of 80 nm when the SiO2 content is 4 wt%. With the introduction of SiO2, the thermal resistance and the storage modulus of NR host significantly increase, and the activation energy of relaxation of the nanocomposite, compared to the raw NR, increases from 90.1 to 125.8 kJ/mol. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers
- 1 December 2007
- Published by Elsevier in Composites Science and Technology
- Vol. 67 (15-16) , 3130-3139
Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization
- 1 December 2007
- Published by Elsevier in Composites Science and Technology
- Vol. 67 (15-16) , 3130-3139
Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization