GFG. Federici

G. Federici

*This is an algorithmically generated author record based on publicly available information.

G. Federici has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Report on the 11th European Fusion Physics Workshop (Heraklion, Crete, 8–10 December 2003)

    by D J Campbell, A Bécoulet, G Counsell, G Federici, F Imbeaux, A Kirschner, K Krieger, S Ortolani, R Pitts, V Philipps, et al.

  • Is Carbon a Realistic Choice for ITER's Divertor?

    by C.H. Skinner, G. Federici

    Tritium retention by co-deposition with carbon on the divertor target plate is predicted to limit ITER's DT burning plasma operations (e.g. to about 100 pulses for the worst conditions) before the in-vessel tritium inventory limit, currently set at 350 g, is reached. At this point, ITER will only be able to continue its burning plasma program if technology is available that is capable of rapidly removing large quantities of tritium from the vessel with over 90% efficiency. The removal rate required is four orders of magnitude faster than that demonstrated in current tokamaks. Eighteen years after the observation of co-deposition on JET and TFTR, such technology is nowhere in sight. The inexorable conclusion is that either a major initiative in tritium removal should be funded or that research priorities for ITER should focus on metal alternatives.

  • Tritium Removal from Carbon Plasma Facing Components

    by C.H. Skinner, J.P. Coad, G. Federici

    Tritium removal is a major unsolved development task for next-step devices with carbon plasma-facing components. The 2-3 order of magnitude increase in duty cycle and associated tritium accumulation rate in a next-step tokamak will place unprecedented demands on tritium removal technology. The associated technical risk can be mitigated only if suitable removal techniques are demonstrated on tokamaks before the construction of a next-step device. This article reviews the history of codeposition, the tritium experience of TFTR (Tokamak Fusion Test Reactor) and JET (Joint European Torus) and the tritium removal rate required to support ITER's planned operational schedule. The merits and shortcomings of various tritium removal techniques are discussed with particular emphasis on oxidation and laser surface heating.

  • Top Cited Papers

    Plasma-material interactions in current tokamaks and their implications for next step fusion reactors

    by G. Federici, C.H. Skinner, J.N. Brooks, J.P. Coad, C. Grisolia, A.A. Haasz, A. Hassanein, V. Philipps, C.S. Pitcher, J. Roth, et al.


  • Tritium Issues in Next Step Devices

    by C.H. Skinner, G. Federici

    Tritium issues will play a central role in the performance and operation of next-step deuterium-tritium (DT) burning plasma tokamaks and the safety aspects associated with tritium will attract intense public scrutiny. The orders-of-magnitude increase in duty cycle and stored energy will be a much larger change than the increase in plasma performance necessary to achieve high fusion gain and ignition. Erosion of plasma-facing components will scale up with the pulse length from being barely measurable on existing machines to centimeter scale. Magnetic Fusion Energy (MFE) devices with carbon plasma-facing components will accumulate tritium by co-deposition with the eroded carbon and this will strongly constrain plasma operations. We report on a novel laser-based method to remove co-deposited tritium from carbon plasma-facing components in tokamaks. A major fraction of the tritium trapped in a co-deposited layer during the deuterium-tritium (DT) campaign on the Tokamak Fusion Test Reactor (TFTR) was released by heating with a scanning laser beam. This technique offers the potential for tritium removal in a next-step DT device without the use of oxidation and the associated deconditioning of the plasma-facing surfaces and expense of processing large quantities of tritium oxide. The operational lifetime of alternative materials such as tungsten hasmore » significant uncertainties due to melt layer loss during disruptions. Production of dust and flakes will need careful monitoring and minimization, and control and accountancy of the tritium inventory will be critical issues. Many of the tritium issues in Inertial Fusion Energy (IFE) are similar to MFE, but some, for example those associated with the target factory, are unique to IFE. The plasma-edge region in a tokamak has greater complexity than the core due to lack of poloidal symmetry and nonlinear feedback between the plasma and wall. Sparse diagnostic coverage and low dedicated experimental run time has hampered the development of predictive models. Diagnostic advances are urgently needed to better characterize the plasma edge and wall and improve our predictive capability.« less


  • Tritium experience in large tokamaks: Application to ITER

    by C.H. Skinner, C.A. Gentile, J.C. Hosea, D. Mueller, J.P. Coad, G. Federici, R. Haange

    Report on the IEA Workshop held at Princeton, New Jersey, United States of America, 16-18 March 1998. Recent experience with the use of tritium fuel in the TFTR and JET, together with progress in developing the technical design of ITER, has expanded the technical knowledge base for tritium issues in fusion. This paper reports on an IEA workshop that brought together scientists and engineers to share experience and expertise on all fusion related tritium issues. Extensive discussion periods were devoted to exploring outstanding issues and identifying potential R&D avenues to address them. The presentations, discussions and recommendations are summarized.