Robert Edward Jensen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Robert Edward Jensen has a total of 34 co-authors. Here are the top co-authors by number of shared publications:
- Mary Anderson Bryant
Research Hydraulic Engineer, Coastal and Hydraulics Laboratory, U.S. Army Engineer Research and Development Center, 3909 Halls Ferry Rd., Vicksburg, MS 39180
2 shared publications - A. Cialone
Engineering Technician, Coastal and Hydraulics Laboratory, U.S. Army Engineer Research and Development Center, 3909 Halls Ferry Rd., Vicksburg, MS 39180
1 shared publication - Adrian Neild
Department of Mechanical and Aerospace Engineering, Monash University, Clayton, VIC 3800, Australia
1 shared publication - Alison S. Grzegorzewski
Research Hydraulic Engineer, Coastal and Hydraulics Laboratory, U.S. Army Engineer Research and Development Center, 3909 Halls Ferry Rd., Vicksburg, MS 39180
1 shared publication - Andrew Brian Kennedy
University of Notre Dame
1 shared publication Authors:David E. WeissmanxSearch for articles by this authorAffiliationsDepartment of Engineering, Hofstra University, Hempstead, New YorkFuk K. LixSearch for articles by this author, Shu-hsiang LouxSearch for articles by this author, Son V. NghiemxSearch
1 shared publication
Latest Publications
- Open Access
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 107
STORM CLUSTER IDENTIFICATION AND IMPACTS FOR SHORELINE RESILIENCE
The USACE recognizes resilience as a fundamental and important characteristic of its systems and operations. (USACE, 2020) Increasing attention is being focused on understanding the effects of extratropical storms and storm clustering (Wadey, 2023). These effects will take on particular significance in regions with higher rates of sea level change. The development of a foundational understanding of the spatial and temporal characteristics of storm clusters may be found to be essential to a more comprehensive description of nonstationary hazards and risks. USACE mission areas that may be sensitive to sea level change, storm power, and threshold exceedance include Coastal Storm Risk Management (CSRM), Flood Risk Management (FRM), Navigation, Water Supply, Recreation, Environmental Restoration, and Disaster Response. The approach to the identification and evaluation of storm cluster potential impacts will analyze the range and significance of storm cluster definitions, storm and storm cluster duration and power, exceedance of wave height threshold, influence of wave direction, and water level realization and development over the storm cluster.
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 107
Open AccessSTORM CLUSTER IDENTIFICATION AND IMPACTS FOR SHORELINE RESILIENCE
The USACE recognizes resilience as a fundamental and important characteristic of its systems and operations. (USACE, 2020) Increasing attention is being focused on understanding the effects of extratropical storms and storm clustering (Wadey, 2023). These effects will take on particular significance in regions with higher rates of sea level change. The development of a foundational understanding of the spatial and temporal characteristics of storm clusters may be found to be essential to a more comprehensive description of nonstationary hazards and risks. USACE mission areas that may be sensitive to sea level change, storm power, and threshold exceedance include Coastal Storm Risk Management (CSRM), Flood Risk Management (FRM), Navigation, Water Supply, Recreation, Environmental Restoration, and Disaster Response. The approach to the identification and evaluation of storm cluster potential impacts will analyze the range and significance of storm cluster definitions, storm and storm cluster duration and power, exceedance of wave height threshold, influence of wave direction, and water level realization and development over the storm cluster.
- 9 June 2021
- Published by American Shore and Beach Preservation Association in Shore & Beach
- p. 41-45
CDIP observations of recent extreme wave conditions on U.S. coasts
The Coastal Data Information Program (CDIP) maintains wave gauge stations for continuous coverage, with precision instruments and dedicated telemetry and dissemination infrastructure. Decades of this persistent, quality-controlled wave monitoring effort has provided the data required to generate metrics for wave climate at coastal locations across the United States and identify and characterize extreme wave events. During the extremely active 2020 North Atlantic hurricane season, the CDIP East Coast array recorded significantly elevated wave conditions generated by no fewer than 15 named storms. In California, meanwhile, long-term monitoring stations have measured new all-time maximum wave heights during recent storm events. Complete quality-controlled directional spectra and displacement data sets, as well as sea surface temperature and surface current data from the wave buoys, are publicly available at http://cdip.ucsd.edu.
- 9 June 2021
- Published by American Shore and Beach Preservation Association in Shore & Beach
- p. 41-45
CDIP observations of recent extreme wave conditions on U.S. coasts
The Coastal Data Information Program (CDIP) maintains wave gauge stations for continuous coverage, with precision instruments and dedicated telemetry and dissemination infrastructure. Decades of this persistent, quality-controlled wave monitoring effort has provided the data required to generate metrics for wave climate at coastal locations across the United States and identify and characterize extreme wave events. During the extremely active 2020 North Atlantic hurricane season, the CDIP East Coast array recorded significantly elevated wave conditions generated by no fewer than 15 named storms. In California, meanwhile, long-term monitoring stations have measured new all-time maximum wave heights during recent storm events. Complete quality-controlled directional spectra and displacement data sets, as well as sea surface temperature and surface current data from the wave buoys, are publicly available at http://cdip.ucsd.edu.
- Open Access
- 20 May 2021
- Published by Springer Nature in Ocean Dynamics
- Vol. 71 (6-7) , 731-755
Quantifying wave measurement differences in historical and present wave buoy systems
An intra-measurement evaluation was undertaken, deploying a NOMAD buoy equipped with three National Data Buoy Center and two Environment and Climate Change Canada-AXYS sensor/payload packages off Monterey, California; a Datawell Directional Waverider buoy was deployed within 19 km of the NOMAD site. The six independent wave measurement systems reported hourly estimates of the frequency spectra, and when applicable, the four Fourier directional components. The integral wave parameters showed general agreement among the five sensors compared to the neighboring Datawell Directional Waverider, with the Inclinometer and the Watchman performing similarly to the more sophisticated 3DMG, HIPPY, and Triaxys sensor packages. As the Hm0 increased, all but the Inclinometer were biased low; however, even the Watchman reported reasonable wave measurements up to about 6–7 m, after which the Hm0 becomes negatively biased up to about a meter, comparable to previous studies. The parabolic fit peak spectral wave period, Tpp, results showed a large scatter, resulting from the complex nature of multiple swell wave systems compounded by local wind-sea development, exacerbated by a variable that can be considered as temporally unstable. The three directional sensors demonstrated that NOMAD buoys are capable of measuring directional wave properties along the western US coast, with biases of about 6 to 9 deg, and rms errors of approximately 30 deg. Frequency spectral evaluations found similarities in the shape, but a significant under estimation in the high frequency range. The results from slope analyses also revealed a positive bias in the rear face of the spectra, and a lack of invariance in frequency as suggested by theory.
- 20 May 2021
- Published by Springer Nature in Ocean Dynamics
- Vol. 71 (6-7) , 731-755
Open AccessQuantifying wave measurement differences in historical and present wave buoy systems
An intra-measurement evaluation was undertaken, deploying a NOMAD buoy equipped with three National Data Buoy Center and two Environment and Climate Change Canada-AXYS sensor/payload packages off Monterey, California; a Datawell Directional Waverider buoy was deployed within 19 km of the NOMAD site. The six independent wave measurement systems reported hourly estimates of the frequency spectra, and when applicable, the four Fourier directional components. The integral wave parameters showed general agreement among the five sensors compared to the neighboring Datawell Directional Waverider, with the Inclinometer and the Watchman performing similarly to the more sophisticated 3DMG, HIPPY, and Triaxys sensor packages. As the Hm0 increased, all but the Inclinometer were biased low; however, even the Watchman reported reasonable wave measurements up to about 6–7 m, after which the Hm0 becomes negatively biased up to about a meter, comparable to previous studies. The parabolic fit peak spectral wave period, Tpp, results showed a large scatter, resulting from the complex nature of multiple swell wave systems compounded by local wind-sea development, exacerbated by a variable that can be considered as temporally unstable. The three directional sensors demonstrated that NOMAD buoys are capable of measuring directional wave properties along the western US coast, with biases of about 6 to 9 deg, and rms errors of approximately 30 deg. Frequency spectral evaluations found similarities in the shape, but a significant under estimation in the high frequency range. The results from slope analyses also revealed a positive bias in the rear face of the spectra, and a lack of invariance in frequency as suggested by theory.
- 1 September 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (5)
Application of the Nearshore Wave Model STWAVE to the North Atlantic Coast Comprehensive Study
The U.S. Army Corps of Engineers (USACE) recently completed a detailed study to address the coastal storm and flood risk to vulnerable population, property, ecosystems, and infrastructure affected by Hurricane Sandy. One component of the North Atlantic Coast Comprehensive Study (NACCS) used a suite of high-fidelity numerical models to produce nearshore water level and wave estimates for the North Atlantic coast. Nearshore wave transformation for the NACCS was accomplished using the wave model Steady-State Spectral Wave (STWAVE). To represent rigorously the underlying physical processes of the modeled storm events, tight two-way coupling between an advanced circulation model and STWAVE was facilitated with a modeling system for coastal storms. Seven historical storm events, two extratropical and five tropical storms, were selected for evaluation of the STWAVE model. The storms selected were Hurricane Gloria (1985), extratropical 070 (January 1996), extratropical 073 (December 1996), Tropical Storm Josephine (1996), Hurricane Isabel (2003), Hurricane Irene (2011), and Hurricane Sandy (2012). Mining numerous data sources identified 30 buoys within the STWAVE domain. STWAVE results were compared to the existing measurements using both graphical and statistical methods, resulting in one of the most comprehensive nearshore wave model assessments to date. The performance of STWAVE improved significantly with more recent storms, particularly for Irene and Sandy. This improvement is likely the result of a combination of factors, such as, but not limited to, more accurate wind and offshore forcing, advancements in buoy technology, and a large measurement population.
- 1 September 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (5)
Application of the Nearshore Wave Model STWAVE to the North Atlantic Coast Comprehensive Study
The U.S. Army Corps of Engineers (USACE) recently completed a detailed study to address the coastal storm and flood risk to vulnerable population, property, ecosystems, and infrastructure affected by Hurricane Sandy. One component of the North Atlantic Coast Comprehensive Study (NACCS) used a suite of high-fidelity numerical models to produce nearshore water level and wave estimates for the North Atlantic coast. Nearshore wave transformation for the NACCS was accomplished using the wave model Steady-State Spectral Wave (STWAVE). To represent rigorously the underlying physical processes of the modeled storm events, tight two-way coupling between an advanced circulation model and STWAVE was facilitated with a modeling system for coastal storms. Seven historical storm events, two extratropical and five tropical storms, were selected for evaluation of the STWAVE model. The storms selected were Hurricane Gloria (1985), extratropical 070 (January 1996), extratropical 073 (December 1996), Tropical Storm Josephine (1996), Hurricane Isabel (2003), Hurricane Irene (2011), and Hurricane Sandy (2012). Mining numerous data sources identified 30 buoys within the STWAVE domain. STWAVE results were compared to the existing measurements using both graphical and statistical methods, resulting in one of the most comprehensive nearshore wave model assessments to date. The performance of STWAVE improved significantly with more recent storms, particularly for Irene and Sandy. This improvement is likely the result of a combination of factors, such as, but not limited to, more accurate wind and offshore forcing, advancements in buoy technology, and a large measurement population.
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (2)
Regional Wave Modeling and Evaluation for the North Atlantic Coast Comprehensive Study
Accurate estimation of storm surge along the coasts subject to extreme storm conditions requires proper wind and pressure forcing and quantification of the wind waves resulting from local and far-field energy sources. This paper summarizes the steps involved in accurately representing the offshore wave climate for the North Atlantic Coast Comprehensive Study (NACCS) domain, defined from the United States–Canadian border in Maine to the Virginia–North Carolina border. The motivation of the regional wave modeling is to provide offshore boundary conditions for the simulation of extreme extratropical and synthetic tropical events to drive the nearshore wave and surge modeling efforts within the NACCS. The offshore wave conditions were estimated using the third-generation WAve Modelling (WAM) model. Value-added wind fields were defined for each of the four wave model grids (North Atlantic Ocean Basin, U.S. Coastal Regional scale, and two subregional-scale grid systems covering the NACCS coastal domain)...
- 1 March 2017
- Published by American Society of Civil Engineers (ASCE) in Journal of Waterway, Port, Coastal, and Ocean Engineering
- Vol. 143 (2)
Regional Wave Modeling and Evaluation for the North Atlantic Coast Comprehensive Study
Accurate estimation of storm surge along the coasts subject to extreme storm conditions requires proper wind and pressure forcing and quantification of the wind waves resulting from local and far-field energy sources. This paper summarizes the steps involved in accurately representing the offshore wave climate for the North Atlantic Coast Comprehensive Study (NACCS) domain, defined from the United States–Canadian border in Maine to the Virginia–North Carolina border. The motivation of the regional wave modeling is to provide offshore boundary conditions for the simulation of extreme extratropical and synthetic tropical events to drive the nearshore wave and surge modeling efforts within the NACCS. The offshore wave conditions were estimated using the third-generation WAve Modelling (WAM) model. Value-added wind fields were defined for each of the four wave model grids (North Atlantic Ocean Basin, U.S. Coastal Regional scale, and two subregional-scale grid systems covering the NACCS coastal domain)...
- 5 December 2013
- Published by Springer Nature in Climatic Change
- Vol. 122 (4) , 635-649
Simulations of Hurricane Katrina (2005) under sea level and climate conditions for 1900
- 5 December 2013
- Published by Springer Nature in Climatic Change
- Vol. 122 (4) , 635-649
Simulations of Hurricane Katrina (2005) under sea level and climate conditions for 1900
- 3 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 60 (9) , 1964-1970
Ultrasonic manipulation of particles in an open fluid film
Ultrasonic manipulation is a noncontact method of trapping and holding particles in suspension, and has found many applications in microfluidic systems. Typically, ultrasonic standing waves are used; this approach is well established in fully enclosed microfluidic systems consisting of channels or chambers with an attached piezoelectric actuator. In this work, we examine the use of ultrasonic manipulation in open fluid films, which offer a high degree of accessibility. A piezoelectric actuator is presented which can be lowered into a separate fluid tray. This two-part system offers a high degree of flexibility; indeed the actuator can be removed with little disturbance to the particle patterns, so manipulation could potentially be periodically applied as required. Particle manipulation is shown to be possible over a distance many times the size of the actuator. Furthermore, particle manipulation can also be achieved in a tilted fluid film, so alignment between the two parts of the system is not critical to its operation.
- 3 September 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
- Vol. 60 (9) , 1964-1970
Ultrasonic manipulation of particles in an open fluid film
Ultrasonic manipulation is a noncontact method of trapping and holding particles in suspension, and has found many applications in microfluidic systems. Typically, ultrasonic standing waves are used; this approach is well established in fully enclosed microfluidic systems consisting of channels or chambers with an attached piezoelectric actuator. In this work, we examine the use of ultrasonic manipulation in open fluid films, which offer a high degree of accessibility. A piezoelectric actuator is presented which can be lowered into a separate fluid tray. This two-part system offers a high degree of flexibility; indeed the actuator can be removed with little disturbance to the particle patterns, so manipulation could potentially be periodically applied as required. Particle manipulation is shown to be possible over a distance many times the size of the actuator. Furthermore, particle manipulation can also be achieved in a tilted fluid film, so alignment between the two parts of the system is not critical to its operation.
- Open Access
- 17 January 2011
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (32) , waves.29-29
WAVES IN WETLANDS: HURRICANE GUSTAV
Few wave measurements have been made in wetlands during high-energy, surge events, such as hurricanes. During Hurricane Gustav in 2008, many nearshore wave measurements were made in Southeastern Louisiana. These data are used to verify a nearshore wave modeling system and to explore the characteristics of hurricane waves in wetlands. The modeling system consists of the wave generation model WAM, the nearhsore wave model STWAVE, and the circulation model ADCIRC. The measurements confirm reasonable success in modeling the waves. The measurements and modeling also expose some of the problems of measuring waves in highly-variable water depths under hurricane forcing and modeling waves in rapidly degrading wetlands.
- 17 January 2011
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (32) , waves.29-29
Open AccessWAVES IN WETLANDS: HURRICANE GUSTAV
Few wave measurements have been made in wetlands during high-energy, surge events, such as hurricanes. During Hurricane Gustav in 2008, many nearshore wave measurements were made in Southeastern Louisiana. These data are used to verify a nearshore wave modeling system and to explore the characteristics of hurricane waves in wetlands. The modeling system consists of the wave generation model WAM, the nearhsore wave model STWAVE, and the circulation model ADCIRC. The measurements confirm reasonable success in modeling the waves. The measurements and modeling also expose some of the problems of measuring waves in highly-variable water depths under hurricane forcing and modeling waves in rapidly degrading wetlands.
- Open Access
- 1 November 1999
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 29 (11) , 2829-2850
Directional Response of Wind Waves to a Large Wind Shift
The directional response of a fully arisen sea to a ∼90° wind shift is studied using a combination of airborne radar and in situ directional wave observations. The observations were made in February 1991 as a part of the Surface Wave Dynamics Experiment. Radar and buoy mean wave directions in several frequency bands are polynomial-smoothed in fetch and duration coordinates and analyzed for the directional relaxation parameter b by using finite differences of the gridded, smoothed data in a one-dimensional advection equation for the mean wave direction. The analysis is carried out using several different sets of buoy wind and wave data in an event window of 40 h in duration by 200 km in fetch (100–300 km offshore). For the most well-populated and reliable inverse wave age class in the study, 1.2 ⩽ U/c < 1.6, the authors find b = 3.3(±0.1) × 10−5. The data do not support any inference as to possible wave age dependence other than, perhaps, the null hypothesis, b = const (U/c). Frequencies near the spectral peak do not respond according to the relaxation model, and misleading values of b may result from a standard analysis of the data. Wave–current interactions are a potential source of bias. Reflected waves in the study area may be biasing the present result low by as much as 20%.
- 1 November 1999
- Published by American Meteorological Society in Journal of Physical Oceanography
- Vol. 29 (11) , 2829-2850
Open AccessDirectional Response of Wind Waves to a Large Wind Shift
The directional response of a fully arisen sea to a ∼90° wind shift is studied using a combination of airborne radar and in situ directional wave observations. The observations were made in February 1991 as a part of the Surface Wave Dynamics Experiment. Radar and buoy mean wave directions in several frequency bands are polynomial-smoothed in fetch and duration coordinates and analyzed for the directional relaxation parameter b by using finite differences of the gridded, smoothed data in a one-dimensional advection equation for the mean wave direction. The analysis is carried out using several different sets of buoy wind and wave data in an event window of 40 h in duration by 200 km in fetch (100–300 km offshore). For the most well-populated and reliable inverse wave age class in the study, 1.2 ⩽ U/c < 1.6, the authors find b = 3.3(±0.1) × 10−5. The data do not support any inference as to possible wave age dependence other than, perhaps, the null hypothesis, b = const (U/c). Frequencies near the spectral peak do not respond according to the relaxation model, and misleading values of b may result from a standard analysis of the data. Wave–current interactions are a potential source of bias. Reflected waves in the study area may be biasing the present result low by as much as 20%.
- 1 August 1997
- Published by American Meteorological Society in Journal of Atmospheric and Oceanic Technology
- Vol. 14 (4) , 835-848
Measurements of Ocean Surface Stress Using Aircraft Scatterometers
Scatterometer model functions that directly estimate friction velocity have been developed and are being tested with radar and in situ data acquired during the Surface Wave Dynamics Experiment (SWADE) of 1991. Ku-band and C-band scatterometers were operated simultaneously for extensive intervals for each of 10 days during SWADE. The model function developed previously from the FASINEX experiment converts the Ku-band normalized radar cross-section (NRCS) measurements into friction velocity estimates. These are compared to in situ estimates of surface wind stress and direction across a wide area both on and off the Gulf Stream (for hourly intervals), which were determined from buoy and meteorological measurements during February and March 1991. This involved the combination of a local, specially derived wind field, with an ocean wave model coupled through a sea-state-dependent drag coefficient. The Ku-band estimates u∗ magnitude are in excellent agreement with the in situ values. The C-band scatterometer measurements were coincident with the Ku-band NRCSs, whose u∗ estimates are then used to calibrate the C band. The results show the C-band NRCS dependence at 20°, 30°, 40°, and 50° to be less sensitive to friction velocity than the corresponding cases for Ku band. The goal is to develop the capability of making friction velocity estimates (and surface stress) from radar cross-sectional data acquired by satellite scatterometers.
- 1 August 1997
- Published by American Meteorological Society in Journal of Atmospheric and Oceanic Technology
- Vol. 14 (4) , 835-848
Measurements of Ocean Surface Stress Using Aircraft Scatterometers
Scatterometer model functions that directly estimate friction velocity have been developed and are being tested with radar and in situ data acquired during the Surface Wave Dynamics Experiment (SWADE) of 1991. Ku-band and C-band scatterometers were operated simultaneously for extensive intervals for each of 10 days during SWADE. The model function developed previously from the FASINEX experiment converts the Ku-band normalized radar cross-section (NRCS) measurements into friction velocity estimates. These are compared to in situ estimates of surface wind stress and direction across a wide area both on and off the Gulf Stream (for hourly intervals), which were determined from buoy and meteorological measurements during February and March 1991. This involved the combination of a local, specially derived wind field, with an ocean wave model coupled through a sea-state-dependent drag coefficient. The Ku-band estimates u∗ magnitude are in excellent agreement with the in situ values. The C-band scatterometer measurements were coincident with the Ku-band NRCSs, whose u∗ estimates are then used to calibrate the C band. The results show the C-band NRCS dependence at 20°, 30°, 40°, and 50° to be less sensitive to friction velocity than the corresponding cases for Ku band. The goal is to develop the capability of making friction velocity estimates (and surface stress) from radar cross-sectional data acquired by satellite scatterometers.