AFAndré Fenili

André Fenili

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


André Fenili has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mathematical modeling and partial feedback linearization control of a constrained and underactuated space tether

    by André Fenili

    This paper investigates the application of the nonlinear control technique called collocated partial feedback linearization to the position and stretching control of a planar underactuated mechanical system. This system is designed to emulate under certain conditions the behavior of a space tether connected to one mass (representing a satellite) at each of its extremities. The flexible cable is approximated by two rigid bodies (thin rods) with springs and dampers attached to represent the cable stiffness and structural damping. The control objective is to move both satellites to its desired positions and to guarantee that on the final configuration the tether is completely stretched. The stability of the closed-loop system is verified and it is proved that the system has global asymptotic stability. The performance of the proposed nonlinear control technique is analyzed via numerical simulations for two cases: one case considering three different values for the damping coefficients and one case considering three different values for the stiffness coefficients. The simulation results show that the collocated partial feedback linearization plus a proportional-derivative control is able to move the satellites to the desired positions and to keep the cable stretched.


  • Open Access

    Nonlinear Velocity and Shape Control of a Rotating Smart Flexible Beam-Like Structure

    by André Fenili

    Smart materials and structures have a great appeal within the aerospace and automotive communities because they promise to enable better performance and functionality over existing structural and functional materials. The idea proposed in this work is part of this challenging and current scenario and can be applied to the study of morphing wings, helicopter blades, etc. Moreover, the mathematical modeling and velocity and shape control of a rotating flexible beam-like structure are investigated. The nonlinear partial differential governing equations of motion are derived using the extended Hamilton’s Principle and numerically integrated using a combination of finite difference and the fourth-order Runge–Kutta methods. In order to force the flexible structure to assume the desired shape and simultaneously control the velocity of the rotating axis, the optimal nonlinear control method named state-dependent Riccati equation (SDRE) is considered. This control technique is applied to piezoelectric actuators along the beam and an external torque coming from a DC motor and acting in the rotating axis. The numerical simulation results show that the proposed control technique is efficient when acting along the rotating beam to deform it into the desired shape while also acting on the motor axis to keep the rotation speed constant.


  • Dynamics and control of a flexible rotating clamped-free beam by SDRE strategy

    by Vinicius Piro Barragam, Andre Fenili, Ijar Milagre da Fonseca

    Purpose: The purpose of this paper is the dynamic analysis of the coupled rotation and vibration motion of a system containing a central rigid body to which is attached a flexible beam. Design/methodology/approach: The methodology includes the Lagrange’s formulation by using the extended Hamilton’s Principle in conjunction with the assumed modes method to describe the system of equations by ordinary differential equations. The first unconstrained mode of vibration was considered as the solution for the transversal displacement. Such mode emerges as the eigenvalue problem solution associated to the dynamics of the system. The control strategy adopted is a nonlinear analogy of the linear quadratic regulator problem as the Riccati equation is solved at every integration step during the numerical solutions. This strategy is known as state-dependent Riccati equation. Findings: By means of computational simulations, it was found the relation between controlled motion and inertia ratio. Research limitations/implications: This work is limited to planar case and fixed hub. Practical implications: Practical implications of this work realize the design of lighter yet dexterous structures. Originality/value: The contribution of this paper is the position and vibration control of a flexible beam accounting for nonlinearity effects and the fact that the structure to where it is clamped has a comparable inertia.


  • LagranTexPac: A Software Tool to Obtain the Dynamic Equations of Mechanical Systems

    by Fernando Henrique Gomes Zucatelli, Magno Enrique Mendoza Meza, André Fenili

  • Preliminary estimation of the atmospheric density from the position, velocity and acceleration states for a CuboSat satellite

    by Wantuir Aparecido de Freitas, André Fenili

    Conference Proceedings System by SWGE™ CopyRight 2016- SWGE Sistemas Ltda.

  • Nonlinear Control of a Rotating Smart Beam

    by André Fenili

    Conference Proceedings System by SWGE™ CopyRight 2016- SWGE Sistemas Ltda.

  • Editorial Dynamics and Control of Aerospace and Vertical Transportation Systems

    by José M. Balthazar, Paulo Batista Gonçalves, Stefan Kaczmarczyk, André Fenili, Marcos Silveira, Ignacio Herrera Navarro

    This Special Issue presents a selection of papers initially presented at the 11th International Conference on Vibration Problems (ICOVP-2013), held from 9 to 12 September 2013 in Lisbon, Portugal. The main topics of this Special Issue are linear and, mainly, nonlinear dynamics, chaos and control of systems and structures and their applications in different field of science and engineering. According to the goal of the Special Issue, the selected contributions are divided into three major parts: “Vibration Problems in Vertical Transportation Systems”, “Nonlinear Dynamics, Chaos and Control of Elastic Structures” and “New Strategies and Challenges for Aerospace and Ocean Structures Dynamics and Control”.

  • Open Access

    Projeto, implementação e controle de uma plataforma aerostática com jatos de ar

    by Wilian L. Campesato, Valdemir Carrara, Guilherme A. Siqueli, André Fenili

    Este trabalho tem por objetivo o projeto, implementação e controle de uma plataforma sustentada por mancal aerostático usando jatos de ar comprimido, a fim de simular o controle de atitude de satélites artificiais empregando atuadores de jatos de gás. Para simular o ambiente espacial, o sistema de controle foi implantado numa mesa (plataforma) de mancal aerostático, a qual permite simular um ambiente de baixo atrito, semelhante àquele encontrado nas órbitas de satélites. Neste trabalho são descritos os procedimentos de projeto, os requisitos, a plataforma aerostática, o esquema de controle e comunicação, o balanceamento estático, o modelamento matemático, bem como se discorre sobre simulações realizadas de controle tipo bang-bang. Este projeto visa conseguir um ambiente experimental no qual diversas leis de controle baseadas em jatos de gás e utilizando diversos sensores possam ser testadas, tanto para servir como protótipo a um sistema real embarcado em satélites quanto para experimentações de novas técnicas de controle, além de uso acadêmico.

  • Open Access

    Preliminary development plan of the alr, the laser rangefinder for the aster deep space mission to the 2001 sn263 asteroid

    by Antonio Gil Vicente de Brum, Annibal Hetem Jr., Israel da Silveira Rêgo, Cayo Prado Fernandes Francisco, Andre Fenili, Fernando Madeira, Flavio Caldas da Cruz, Marcelo Assaf

    Preliminary studies on field emission (FE) arrays comprised of carbon nanotubes (CNT) as an electron source for electric propulsion system show remarkably promising results. Design parameters for a carbon nanotube (CNT) field-emission device operating on triode configuration were numerically simulated and optimized in order to enhance the e-beam focusing quality. An additional focus gate (FG) was integrated to the device to control the profile of the emitted e-beam. An axisymmetric finite element model was developed to calculate the electric field distribution on the vacuum region and a modified Fowler-Nordheim (FN) equation was used to evaluate the current density emission and the effective emitter area. Afterward, a FE simulation was employed in order to calculate the trajectory of the emitted electrons and define the electron-optical properties of the e-beam. The integration of the FG was fully investigated via computational intelligence techniques. The best performance device according to our simulations presents a collimated e-beam profile that suits well for field emission displays, magnetic field detection and electron microscopy. The automated computational design tool presented in this study strongly benefits the robust design of integrated electron-optical systems for vacuum field emission applications, including electrodynamic tethering and electric propulsion systems.