Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Liuhe Li has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Basic characteristics of the double layer and ion energy in bipolar pulse HiPIMS

    by Yiyan Wu, Mingyue Han, Yang Luo, Mingxuan Yang, Liuhe Li

    双极高功率脉冲磁控溅射(Bipolar pulsed HiPIMS, BP-HiPIMS)正脉冲期间形成的阳极电双层(Double layer, DL)是离子加速的重要结构。目前,电双层的形成特征及其对离子能量的调控机制尚不清晰。针对此,本文采用自主研制的高时空分辨发射探针,结合质谱仪,系统诊断了铜靶BP-HiPIMS放电中等离子体电位(Vp)的时空演变及离子能量分布特征,分析了放电参数对电双层电位特征及离子能量的影响。结果表明,正脉冲开启后,靶前区域经历了鞘层结构重建到动态维持的过程。结合电位测量结果和放电过程图像,电双层边界稳定在磁零点附近,形成约20 V的电位梯度。放电参数会影响电双层形成过程:更高的正脉冲电压有利于电双层的形成并增加其边界电位降,进而提高高能离子占比;延长负脉冲宽度虽然可以增加电离能较低的金属靶原子占比,缩短电双层建立的时间,但同时会导致大量离子在负脉冲期间到达基体位置,压缩离子在正脉冲下的有效加速时间,减少高能离子占比。这些结果揭示了电双层演变与粒子增能的物理机制,为调控高能离子通量、沉积先进薄膜提供了实验和理论基础。

  • Effects of hybrid HCPEB and N ion implantation pretreatment on the tribological performance of GLC films deposited on TC4 titanium alloy

    by Xiaoting Wang, Ling Tang, Yang Luo, Hua Li, Dachen Deng, Jiaxu Zhang, Pengbo Feng, Mingyue Han, Liuhe Li


  • Investigation of plasma decay in BP-HiPIMS discharges

    by Yang Luo, Mingyue Han, Yiyan Wu, Pu Gao, Liuhe Li

    Investigation of the plasma decay mechanism from energy and density temporal/spatial evolutions together is important and urgent in the novel bipolar-pulse high power impulse magnetron sputtering (BP-HiPIMS) discharge for adjusting the deposited ion energy flux. In this work, temporal and spatial characteristics of the electron energy distribution function (EEDF) have been systematically investigated using a time-resolved (250 ns) Langmuir probe to obtain the plasma decay process clearly. The plasma decay has a typical characteristic of three-step during the positive pulse. At the initial period of positive pulse (Step 1), the existence of hot electrons and potential gradient force can accelerate the plasma density decay even up to ∼1015 m−3 μs−1. As the electron energy are cooled to several eVs, the plasma decay is dominated by the density gradient pressure with an ion sound velocity (0.5–0.7 kms−1), which can increase the downstream electron density (Step 2). As the redistribution of plasma density in the whole discharge domain, the electron density decay is exponential (Step 3) and the maximum decay rate is near the target due to the higher density gradient, while the maximum electron temperature is away from the target. Along the density gradient diffusion, the relation between electron density and temperature in BP-HiPIMS satisfies the well-known Boltzmann relation n e = n 0exp(eV p/kT e). In addition, the EEDF characteristics in the BP-HiPIMS operated with an auxiliary anode and solenoid coil have also been investigated in this work, where an increase in electron density and plasma diffusion mobility has been observed after applying the anode or solenoid coil. These temporal and spatial EEDFs allow us to understand the complex plasma physics in the emerged BP-HiPIMS discharge clearly, especially with the view of high-energy and low-energy electron loss and balance.


  • Plasma potential and ion energy characteristics in BP-HiPIMS discharge with double layer

    by Yang Luo, Mingyue Han, Duoduo Li, Ling Tang, Hua Li, Liuhe Li, Weizong Wang, Dachen Deng, Jiabin Gu, Guodong Li

    As an emerging ion acceleration plasma source, the bipolar-pulse high power impulse magnetron sputtering (BP-HiPIMS) discharge has been widely studied by academia and industry due to its ability to adjust the ion kinetic energy. Formation of the double layer (DL) potential structure during the BP-HiPIMS positive pulse is vital for accelerating ions, but its structural characteristics are still unclear. In this work, to understand the DL characteristics affected by various discharge parameters, the evolution of plasma potential V p and ion energy in BP-HiPIMS discharge with copper target has been investigated systematically using an emissive probe and mass spectrometer together. Spatial plasma potential measurements show that the DL is established in front of the target during the positive pulse, whose boundary potential drop U DL to accelerate ions can be increased to ∼60 V at a lower operating gas pressure (p= 0.6 Pa) and a higher applied positive pulse voltage (U + = 200 V). The ignition onset time of DL after applying the positive pulse can be shortened to ∼25 μs by decreasing the gas pressure and increasing the positive pulse voltage or negative pulse duration. After DL ignition, a group of high-energy copper ions with energy higher than the surrounding plasma potential can be recognized in the ion energy distribution function curves in the downstream plasma. This result illustrates that the copper ions can be ionized in the high-potential plasma region and be accelerated by the DL boundary potential drop. In addition, a global current balance model of the DL in BP-HiPIMS is developed, which suggests that the U DL can be well adjusted by increasing the positive pulse voltage U + especially for U + > 200 V as verified by the experimental potential measurements. All results suggest that the copper particles play an important role in the formation of DL and the DL plays an important role in accelerating copper ions.


  • Open Access

    Erosion Performance of TiAlSiN Coatings Prepared by High-Power Pulsed Magnetron Sputtering

    by Hua Li, Liuhe Li, Duoduo Li, Ling Tang, Yang Luo, Guang Li, Yuehan Wu, Guodong Li, Yi Xu, Mingyue Han, et al.

    Erosion seriously threatens the safety of high-speed rotating mechanical components in very harsh service environments, particularly for lightweight titanium alloy matrix material. In order to improve the erosion resistance of titanium alloy, TiAlSiN coatings with different phase compositions are deposited on TC6 titanium alloy using a high-power pulse magnetron sputtering discharge (HPPMS) system under various discharge voltages. The componential and microstructural evolution as well as mechanical properties of the TiAlSiN coatings are evaluated by X-ray diffraction, scanning electron microscopy, and nanoindentation, respectively. The erosion performance relative to titanium alloy is investigated by a sand blasting tester. With the increase in discharge voltage from −500 to −600 V, the peak of discharge current increases from 105 to 225 A. The prepared TiAlSiN coatings show a shift of the preferred crystallographic orientation from (220) to (200), but all of them have a dense nanocomposite structure. Their hardness (H) and elastic modulus (E) gradually increase before decreasing, arriving at maximum values of 35.34 and 360.5 GPa at −570 V. The erosion resistance of the TiAlSiN coatings dependent on the discharge voltage is consistent with the H/E ratio change. The TiAlSiN coatings prepared at −560 V exhibit the optimal erosion resistance, which is 15 times that of the TC6 substrate. The erosion behavior of the coatings is positively correlated with their hardness and toughness. Adjusting the discharge voltage of the HPPMS pulse is finally proved to be an effective way of tailoring the coating phase compositions to improve the erosion resistance of titanium alloy.


  • Formations of anode double layer and ion beam in bipolar-pulse HiPIMS (BP-HiPIMS)

    by Mingyue Han, Yang Luo, Hua Li, Ling Tang, Duoduo Li, Jiabin Gu, Liuhe Li, Ye Xu, Sida Luo

    As an emerging ion acceleration plasma source, the bipolar-pulse high power impulse magnetron sputtering (BP-HiPIMS) discharge provides an effective approach to improve deposited ion energy and tailor the film properties for a large range of applications. The ion acceleration mechanism in BP-HiPIMS discharge is very vital but still unclear now. In the present work, the ion acceleration mechanism is systematically investigated via the experimental measurements, particle-in-cell/Monte Carlo collision (PIC-MCC) simulation, and theoretical model together. In the experiment part, the floating potential V f and the ion velocity distribution function (IVDF) have been measured via the Langmuir probe and the retarding field energy analyser (RFEA) respectively. The measurements show that the V f at the downstream drops from +80 V to ∼+40 V after applying the positive pulse for ∼75 μ s, suggesting the formation of the double layer. Correspondingly, the IVDF changes from the unimodal Maxwellian distribution to the bimodal distribution, suggesting the existence of the ion beam. The PIC-MCC simulation results clearly show the development process of the double layer and ion beam. A theoretical model is introduced to explore the complex plasma dynamics in the experiment and simulation. The theoretical results illustrate that (i) the sheath in front of the target surface prefers an ion sheath rather than an electron sheath, (ii) the stable position of the double layer boundary is in the magnetic null point, (iii) the potential drop across the boundary is influenced by the gas pressure p . These important theoretical results are well consistent with the measurements and simulation. In addition, the oscillation of the double layer boundary and the instabilities of the ions are briefly discussed by combining the previous works.


  • Adjustment of high-energy ion flux in BP-HiPIMS via pulsed coil magnetic field: plasma dynamics and film deposition

    by Yang Luo, Mingyue Han, Yukun Su, Hua Li, Duoduo Li, Ling Tang, Dachen Deng, Jiabin Gu, Xin Yan, Ye Xu, et al.

    As an emerging and extraordinary plasma source, bipolar pulsed high power impulse magnetron sputtering (BP-HiPIMS) discharge has been widely concerned by academia and industry due to the ability to control the deposited ion energy. In the present work, with the intension of increasing the high-energy ion fraction and flux during deposition, the BP-HiPIMS is operated together with a solenoidal coil installed in front of the target. This intension is achieved by applying a pulsed coil current so that the ions generated during the high-power negative pulse can be manipulated to diffuse towards substrate and then arrive at the substrate surface during the positive pulse. Systematic investigations of discharge characteristics and plasma parameters for Ti target discharge in Ar gas have been made, illustrating that applying a pulsed coil current prior to the positive pulse onset for ∼50 μ s is an optimal selection to obtain a larger fraction of high-energy ions. The complex plasma dynamics has also been explored using the particle-in-cell/Monte Carlo collision approach. To verify the statements realized by plasma measurements, the Ti films have been deposited on a floating Si substrate, whose microstructure and surface morphology are characterized by field emission scanning electron microscope and atomic force microscope. The deposition illustrates that applying a pulsed coil current prior to the positive pulse onset for ∼50 μ s can prepare a thicker, denser, and smoother Ti film. The link between the plasma parameters and film microstructure is studied using the molecular dynamics simulations which show that the high-energy ions contribute to optimizing the adatom diffusion and mobility on growing film surface, which is more beneficial to get a smaller grain size and decrease the film surface roughness.


  • Application of positive pulse to extract ions from HiPIMS ionization region

    by Liuhe Li, Jiabin Gu, Yi Xu, Mingyue Han, Marcela Milena Marie Bilek


  • Ion energy distribution and non-linear ion dynamics in BP-HiPIMS and ACBP-HiPIMS discharge

    by Mingyue Han, Yang Luo, Liuhe Li, Hua Li, Ye Xu, Sida Luo

    Investigating the ion dynamics in the emerging bipolar pulse high power impulse magnetron sputtering (BP-HiPIMS) discharge is necessary and important for broadening its industrial applications. Recently, an optimized plasma source operating the BP-HiPIMS with an auxiliary anode and a solenoidal coil is proposed to enhance the plasma flux and energy, named as ACBP-HiPIMS (‘A’-anode, ‘C’-coil). In the present work, the temporal evolutions of the ion velocity distribution functions (IVDF) in BP-HiPIMS and ACBP-HiPIMS discharges are measured using a retarding field energy analyser (RFEA). For the BP-HiPIMS discharge, operated at various positive pulse voltages U + , the temporal evolutions of IVDFs illustrate that there are two high-energy peaks, E 1 and E 2 , which are both lower than the applied U + . The ratio of the mean ion energy E i,mean to the applied U + is around 0.55–0.6 at various U + . In ACBP-HiPIMS discharge, the IVDF evolution shows three distinguishable stages which has the similar evolution trend with the floating potential V f on the RFEA frontplate: (i) the stable stage with two high-energy peaks ( E 2 and E 3 with energy respectively lower and higher than the applied U + amplitude) when the floating potential V f is close to the applied positive pulse voltage; (ii) the transition stage with low-energy populations when the V f drops by ∼20 V within ∼10 μ s; and (iii) the oscillation stage with alternating E 2 and E 3 populations and ever-present E 1 population when the V f slightly decreases until to the end of positive pulse. The comparison of IVDFs in BP-HiPIMS and ACBP-HiPIMS suggests that both the mean ion energy and high-energy ion flux have been effectively improved in ACBP-HiPIMS discharge. The formation of floating potential drop is explored using the Langmuir probe which may be attributed to the establishment of anode double layer structure. The acceleration of ion at the double layer boundary is analysed using a theoretical model, in this way to clarify the oscillation in IVDF evolutions in ACBP-HiPIMS discharge.