Govindarajalu Jayaprakash
Research Subjects
Govindarajalu Jayaprakash has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Vagheesan Senthilkumar
Department of Mechanical Engineering, SRM TRP Engineering College, Trichy, India
3 shared publications - Anbazhagan Nagadeepan
Department of Mechanical Engineering, SRM TRP Engineering College, Trichy 621105, Tamilnadu, India
2 shared publications - Mohan Sridharan
SRM Institute of Science and Technology
2 shared publications - K. Amarnath
Mechanical, Saranathan College of Engineering, Tiruchirappalli 620012, Tamil Nadu, India
1 shared publication K. Sivakumar
Department of Mechanical Engineering , Bannari Amman Institute of Technology , Sathyamangalam , 638401 , India
1 shared publicationM. Thilak
Department of Mechanical Engineering , T.R.P Engineering College , Tiruchirappalli 621105 , India
1 shared publication
Latest Publications
- Open Access
Advanced Optimization of Surface Characteristics and Material Removal Rate for Biocompatible Ti6Al4V Using WEDM Process with BBD and NSGA II
Machining titanium alloy (Ti6Al4V) used in orthopedic implants via conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity, and tool wear. To overcome these difficulties and ensure high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the biocompatible alloy Ti6Al4Vusing Box–Behnken design (BBD) and nondominated sorting genetic algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current, and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses, namely, MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage have a major influence on the rate at which material is removed (MRR), whereas the pulse duration influences quality (SR). The tradeoff between MRR and SR, when significant process factors are included, emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named nondominated sorting genetic algorithm II (NSGA II) was utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).
Open AccessAdvanced Optimization of Surface Characteristics and Material Removal Rate for Biocompatible Ti6Al4V Using WEDM Process with BBD and NSGA II
Machining titanium alloy (Ti6Al4V) used in orthopedic implants via conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity, and tool wear. To overcome these difficulties and ensure high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the biocompatible alloy Ti6Al4Vusing Box–Behnken design (BBD) and nondominated sorting genetic algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current, and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses, namely, MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage have a major influence on the rate at which material is removed (MRR), whereas the pulse duration influences quality (SR). The tradeoff between MRR and SR, when significant process factors are included, emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named nondominated sorting genetic algorithm II (NSGA II) was utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).
- Open Access
- 16 June 2023
- Published by MDPI AG in Preprints.org
Advanced Optimization of Surface Characteristics and Material Removal Rate for Biocompatible TI6Al4V using WEDM Process with BBD and NSGA II
Machining titanium alloy (Ti6Al4V) used in orthopedic implants by conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity and tool wear. To overcome these difficulties and for ensuring high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the bio-compatible alloy Ti6Al4V using box-behnken design (BBD) and Non-dominated Sorting Genetic Algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses viz MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage has a major influence on the rate at which material is removed (MRR) whereas pulse duration influence quality (SR). The trade-off between MRR and SR, when significant process factors are included emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named non-dominated sorting genetic algorithm II (NSGA II) is utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).
- 16 June 2023
- Published by MDPI AG in Preprints.org
Open AccessAdvanced Optimization of Surface Characteristics and Material Removal Rate for Biocompatible TI6Al4V using WEDM Process with BBD and NSGA II
Machining titanium alloy (Ti6Al4V) used in orthopedic implants by conventional metal cutting processes is challenging due to excessive cutting forces, low surface integrity and tool wear. To overcome these difficulties and for ensuring high-quality products, various industries employ wire electrical discharge machining (WEDM) for precise machining of intricate shapes in titanium alloy. The objective is to make WEDM machining parameters as efficient as possible for machining the bio-compatible alloy Ti6Al4V using box-behnken design (BBD) and Non-dominated Sorting Genetic Algorithm II (NSGA II). A quadratic mathematical model is created to represent the productivity and the quality factor (MRR and surface roughness) in terms of varying input parameters, such as pulse active (Ton) time, pulse inactive (Toff) time, peak amplitude (A) current and applied servo (V) voltage. The established regression models and related prediction plots provide a reliable approach for predicting how the process variables affect the two responses viz MRR and SR. The effects of four process variables on both the responses were examined, and the findings revealed that the pulse duration and voltage has a major influence on the rate at which material is removed (MRR) whereas pulse duration influence quality (SR). The trade-off between MRR and SR, when significant process factors are included emphasizes the need for a reliable multi-objective optimization method. The intelligent metaheuristic optimization method named non-dominated sorting genetic algorithm II (NSGA II) is utilized to provide pareto optimum solutions in order to achieve high material removal rate (MRR) and low surface roughness (SR).
- 5 October 2021
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 28 (5) , 1437-1441
Comparative Regression and Neural Network Modeling of Roughness and Kerf Width in CO2 Laser Cutting of Aluminium
Laser cutting is the most promising thermal-based unconventional manufacturing process which can cut complex shapes on different materials. Surface roughness and kerf width are the important characteristics that determine the product...
- 5 October 2021
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 28 (5) , 1437-1441
Comparative Regression and Neural Network Modeling of Roughness and Kerf Width in CO2 Laser Cutting of Aluminium
Laser cutting is the most promising thermal-based unconventional manufacturing process which can cut complex shapes on different materials. Surface roughness and kerf width are the important characteristics that determine the product...
- 1 December 2019
- Published by ASME International in Journal of Verification, Validation and Uncertainty Quantification
- Vol. 4 (4)
Verification and Validation of Solar Photovoltaic Thermal Water Collectors Performance Using Fuzzy Logic
The performance of the solar photovoltaic (PV) module is more sensitive to its operating temperature. A PV module with a cooling system produces higher electrical power output than a PV module without a cooling system. In addition, the PV module with the integrated cooling system is capable of generating electrical and thermal energy simultaneously. Such an integrated (hybrid) system is termed as a solar photovoltaic thermal (PV/T) system. When two or more collectors connected in series as a mean to have higher output, then such a system is termed as series-connected PV/T water collectors. This study presents two fuzzy inference systems (FISs), namely, Mamdani and Sugeno, for predicting the performance of series-connected PV/T water collectors. The set of rules was framed individually for both models in a way to predict the power output of PV/T water collectors in an inaccurate manner. The predicted results by inference systems are compared with experimental values to check their prediction accuracies. The accuracy of such a proposed Mamdani and Sugeno FIS is 95.67% and 99.92%.
- 1 December 2019
- Published by ASME International in Journal of Verification, Validation and Uncertainty Quantification
- Vol. 4 (4)
Verification and Validation of Solar Photovoltaic Thermal Water Collectors Performance Using Fuzzy Logic
The performance of the solar photovoltaic (PV) module is more sensitive to its operating temperature. A PV module with a cooling system produces higher electrical power output than a PV module without a cooling system. In addition, the PV module with the integrated cooling system is capable of generating electrical and thermal energy simultaneously. Such an integrated (hybrid) system is termed as a solar photovoltaic thermal (PV/T) system. When two or more collectors connected in series as a mean to have higher output, then such a system is termed as series-connected PV/T water collectors. This study presents two fuzzy inference systems (FISs), namely, Mamdani and Sugeno, for predicting the performance of series-connected PV/T water collectors. The set of rules was framed individually for both models in a way to predict the power output of PV/T water collectors in an inaccurate manner. The predicted results by inference systems are compared with experimental values to check their prediction accuracies. The accuracy of such a proposed Mamdani and Sugeno FIS is 95.67% and 99.92%.
- 24 July 2018
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 140 (6)
Prediction of Solar Photovoltaic/Thermal Collector Power Output Using Fuzzy Logic
In recent years, solar PV/T water collectors have been identified as one of the most promising hybrid devices. It is a combination of solar photovoltaic (PV) and solar flat plate collector (FPC) systems capable of generating electrical and thermal power simultaneously. This study presents a model which predicts solar PV/T collector power output using fuzzy logic techniques. A fuzzy logic model was established to predict power output of PV/T with respect to changes in input process and FPC output power. Membership functions were allocated in connection with each model input. Experimental tests conducted during the month of December 2016 are compared with the developed fuzzy model to verify predicted results. The results indicate an agreement between fuzzy model and experimental results with an accuracy of 94.38% and error of 5.62%.
- 24 July 2018
- Published by ASME International in Journal of Solar Energy Engineering
- Vol. 140 (6)
Prediction of Solar Photovoltaic/Thermal Collector Power Output Using Fuzzy Logic
In recent years, solar PV/T water collectors have been identified as one of the most promising hybrid devices. It is a combination of solar photovoltaic (PV) and solar flat plate collector (FPC) systems capable of generating electrical and thermal power simultaneously. This study presents a model which predicts solar PV/T collector power output using fuzzy logic techniques. A fuzzy logic model was established to predict power output of PV/T with respect to changes in input process and FPC output power. Membership functions were allocated in connection with each model input. Experimental tests conducted during the month of December 2016 are compared with the developed fuzzy model to verify predicted results. The results indicate an agreement between fuzzy model and experimental results with an accuracy of 94.38% and error of 5.62%.
- 1 October 2012
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 26 (10) , 3261-3268
Tolerance design of mechanical assembly using NSGA II and finite element analysis
- 1 October 2012
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 26 (10) , 3261-3268
Tolerance design of mechanical assembly using NSGA II and finite element analysis
- 15 March 2012
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 25 (7) , 636-654
FEA compliant parametric tolerance allocation of mechanical assembly using neural network and differential evolution algorithm
The technological and financial limitations in the manufacturing process are the reason for non-achievability of nominal dimension. Therefore, tolerance allocation is of significant importance for assembly. The purpose of tolerance design in product components is to produce a product with the least manufacturing cost possible, while meeting all functional requirements of the product. Limitations of the conventional tolerance allocation methods are as follows. The cost tolerance model developed by regression analysis has fitting error. Only dimensional tolerances of components alone are considered for allocation while the effect of geometric tolerances on functional requirement of the product is not considered. It is based on an assumption that all parts of the assembly are rigid. But in reality, every mechanical assembly consists of at least one or more flexible parts which undergo significant deformation due to gravity, angular velocity, etc. In this article, a back propagation (BP) network is applied to fit the cost–tolerance relationship. A parametric CAD model is developed to determine assembly constraint equation (the functional requirement) based on geometric and dimensional tolerances. Finite element analysis is used to determine the deformation of components in an assembly. An optimisation method based on Differential Evolution (DE) is then used to locate the combination of controllable factors (tolerances) to optimise the output response (manufacturing cost plus quality loss) using the equations stemming from the trained network. Integration of statistical tolerance design with finite element analysis guarantees that the optimal tolerance values of various components of the assembly, obtained as end product of the tolerance design will remain within tolerance variation. Then the product can function as intended under a wide range of operating conditions for the duration of its life. An application problem (motor assembly) is used to investigate the effectiveness and efficiency of the proposed methodology.
- 15 March 2012
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 25 (7) , 636-654
FEA compliant parametric tolerance allocation of mechanical assembly using neural network and differential evolution algorithm
The technological and financial limitations in the manufacturing process are the reason for non-achievability of nominal dimension. Therefore, tolerance allocation is of significant importance for assembly. The purpose of tolerance design in product components is to produce a product with the least manufacturing cost possible, while meeting all functional requirements of the product. Limitations of the conventional tolerance allocation methods are as follows. The cost tolerance model developed by regression analysis has fitting error. Only dimensional tolerances of components alone are considered for allocation while the effect of geometric tolerances on functional requirement of the product is not considered. It is based on an assumption that all parts of the assembly are rigid. But in reality, every mechanical assembly consists of at least one or more flexible parts which undergo significant deformation due to gravity, angular velocity, etc. In this article, a back propagation (BP) network is applied to fit the cost–tolerance relationship. A parametric CAD model is developed to determine assembly constraint equation (the functional requirement) based on geometric and dimensional tolerances. Finite element analysis is used to determine the deformation of components in an assembly. An optimisation method based on Differential Evolution (DE) is then used to locate the combination of controllable factors (tolerances) to optimise the output response (manufacturing cost plus quality loss) using the equations stemming from the trained network. Integration of statistical tolerance design with finite element analysis guarantees that the optimal tolerance values of various components of the assembly, obtained as end product of the tolerance design will remain within tolerance variation. Then the product can function as intended under a wide range of operating conditions for the duration of its life. An application problem (motor assembly) is used to investigate the effectiveness and efficiency of the proposed methodology.