Radchada Buntem
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Radchada Buntem has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Sokheng La
2 shared publicationsAmarawan Intasiri
Department of Chemistry, Faculty of Science, Chulalongkorn University, Bangkok 10330, Thailand
1 shared publication- Anurak Depimai
Department of Archaeology, Faculty of Archaeology, Silpakorn University, Bangkok 10200, Thailand
1 shared publication - Ji-Hyeon Yun1 shared publication
Kanidtha Chuapanit
Silpakorn University
1 shared publicationKasamol Phomsombut
Department of Chemistry, Faculty of Science, Silpakorn University, Nakhon Pathom, Thailand
1 shared publication
Latest Publications
- Open Access
Production Technology and Provenance of Dvāravatī Glass Beads from Khu Bua, Central Thailand: An Archaeometric Study
The production technology and provenance of 22 beads from the Dvāravatī-period site of Khok Phithak at Khu Bua, central Thailand (6th–11th centuries CE), was investigated using a multi-analytical approach combining VP-SEM-EDS, LA-ICP-MS, and micro-Raman spectroscopy. Macroscopic and microstructural evidence indicates that most of the glass beads were manufactured by the drawn-tube method, consistent with the supply of imported Indo-Pacific beads rather than local primary glass production at Khu Bua. However, the assemblage is not technologically homogeneous. From a compositional point of view, 19 beads belong to the m-Na-Al-1 subgroup, linking them to South Asian glassmaking traditions and the large-scale Indo-Pacific bead industry. One bead corresponds to plant-ash soda–lime glass, indicating an additional supply stream, while two outliers, a slag-derived ferruginous glass bead and a chalcedony/agate bead, demonstrate that bead circulation at Khu Bua also involved materials of distinct technological and geological origin. Coloring and opacification technologies, including Pb-Sn opacifiers in green and yellow-green beads and copper-based striking in orange beads, further indicate the use of technologically controlled recipes beyond simple bulk glass import. These results support the interpretation of Khu Bua as an inland consumer center embedded within long-distance Indian Ocean exchange networks.
Open AccessProduction Technology and Provenance of Dvāravatī Glass Beads from Khu Bua, Central Thailand: An Archaeometric Study
The production technology and provenance of 22 beads from the Dvāravatī-period site of Khok Phithak at Khu Bua, central Thailand (6th–11th centuries CE), was investigated using a multi-analytical approach combining VP-SEM-EDS, LA-ICP-MS, and micro-Raman spectroscopy. Macroscopic and microstructural evidence indicates that most of the glass beads were manufactured by the drawn-tube method, consistent with the supply of imported Indo-Pacific beads rather than local primary glass production at Khu Bua. However, the assemblage is not technologically homogeneous. From a compositional point of view, 19 beads belong to the m-Na-Al-1 subgroup, linking them to South Asian glassmaking traditions and the large-scale Indo-Pacific bead industry. One bead corresponds to plant-ash soda–lime glass, indicating an additional supply stream, while two outliers, a slag-derived ferruginous glass bead and a chalcedony/agate bead, demonstrate that bead circulation at Khu Bua also involved materials of distinct technological and geological origin. Coloring and opacification technologies, including Pb-Sn opacifiers in green and yellow-green beads and copper-based striking in orange beads, further indicate the use of technologically controlled recipes beyond simple bulk glass import. These results support the interpretation of Khu Bua as an inland consumer center embedded within long-distance Indian Ocean exchange networks.
- Open Access
- 22 April 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (17) , 25433-25446
Noncalcined Bioactive Glass/Fish Scale Gelatin Hybrids Prepared by Sol–Gel Processing for Enhanced In Vitro Bioactivity
Fish-derived biomaterials have attracted increasing interest for biomedical applications due to their biocompatibility and sustainability. In this study, fish scale gelatin was extracted through sequential acid-alkaline treatment followed by heat extraction at 75 °C and utilized to fabricate a composite scaffold with bioactive glass (BG). BG sol was synthesized from tetraethyl orthosilicate, triethyl phosphate, calcium nitrate, nitric acid, ethanol, and deionized water using a sol–gel method. The BG sol was blended with fish scale gelatin solution and stirred for 2 days to form a wet gel, which was subsequently oven-dried for 6 h to obtain fish scale gelatin/bioactive glass (FSG/BG) composites. The materials were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Thermal analyses showed that the extracted gelatin exhibited behavior comparable to commercial gelatin. FTIR spectra confirmed the formation of Si–O–Si networks and the presence of characteristic protein functional groups in the composite. The compressive strength of the FSG/BG scaffold (7.63 MPa) was higher than that of pure BG (6.51 MPa), indicating improved structural integrity. In vitro bioactivity was evaluated by immersing BG and FSG/BG discs in simulated body fluid (SBF) at 37.5 ± 0.5 °C for up to 16 days. Hydroxyapatite formation on the scaffold surface and Ca2+ concentration changes confirmed the favorable apatite-forming ability and bioactivity of the FSG/BG composite, suggesting its potential for bone tissue engineering applications.
- 22 April 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (17) , 25433-25446
Open AccessNoncalcined Bioactive Glass/Fish Scale Gelatin Hybrids Prepared by Sol–Gel Processing for Enhanced In Vitro Bioactivity
Fish-derived biomaterials have attracted increasing interest for biomedical applications due to their biocompatibility and sustainability. In this study, fish scale gelatin was extracted through sequential acid-alkaline treatment followed by heat extraction at 75 °C and utilized to fabricate a composite scaffold with bioactive glass (BG). BG sol was synthesized from tetraethyl orthosilicate, triethyl phosphate, calcium nitrate, nitric acid, ethanol, and deionized water using a sol–gel method. The BG sol was blended with fish scale gelatin solution and stirred for 2 days to form a wet gel, which was subsequently oven-dried for 6 h to obtain fish scale gelatin/bioactive glass (FSG/BG) composites. The materials were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy with energy-dispersive X-ray (SEM-EDX), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Thermal analyses showed that the extracted gelatin exhibited behavior comparable to commercial gelatin. FTIR spectra confirmed the formation of Si–O–Si networks and the presence of characteristic protein functional groups in the composite. The compressive strength of the FSG/BG scaffold (7.63 MPa) was higher than that of pure BG (6.51 MPa), indicating improved structural integrity. In vitro bioactivity was evaluated by immersing BG and FSG/BG discs in simulated body fluid (SBF) at 37.5 ± 0.5 °C for up to 16 days. Hydroxyapatite formation on the scaffold surface and Ca2+ concentration changes confirmed the favorable apatite-forming ability and bioactivity of the FSG/BG composite, suggesting its potential for bone tissue engineering applications.
- 14 November 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 71, 10-19
Technical examination of Wat Sisowath Ratanaram panel painting
- 14 November 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 71, 10-19
Technical examination of Wat Sisowath Ratanaram panel painting
- Open Access
- 29 December 2022
- Published by King Mongkut's Institute of Technology Ladkrabang in CURRENT APPLIED SCIENCE AND TECHNOLOGY
- Vol. 23 (4)
Cellulose Hydrogel and Its Impact on Mung Bean Growth
Cellulose hydrogels were prepared from commercial cellulose using NaOH/urea and LiCl/DMAc methods. For NaOH/urea method, alkali hydrates (OH-(H2O)x), urea hydrates (urea(H2O)y), and water were adsorbed into cellulose fiber to break hydrogen bonds between cellulose molecules yielding HG_Urea. For LiCl/DMAc method, the Lithium-DMAc complexes, [Li(DMAc)n]+Cl-, were seeped into cellulose fibers and the hydrogen bonds between the fibers were substituted by O-H…Cl-[Li(DMAc)n]+ bonds to produce transparent cellulose gel, HGL. Both freeze-dried hydrogels show the characteristics of cellulose vibrational modes and nano-sized fibrous SEM images. For water retention study, there was no significant difference when different amounts of HG_Urea were being used. Covering mung bean seeds directly helps improve the growth of roots, leaves and stems by 410, 28 and 27%, respectively. HGL and HGL in water were also tested on the germination of the mung bean seeds. As compared with HGL, the average lengths of roots, stems and leaves of mung bean on HGL-water were increased by 82, 32 and 14%, respectively
- 29 December 2022
- Published by King Mongkut's Institute of Technology Ladkrabang in CURRENT APPLIED SCIENCE AND TECHNOLOGY
- Vol. 23 (4)
Open AccessCellulose Hydrogel and Its Impact on Mung Bean Growth
Cellulose hydrogels were prepared from commercial cellulose using NaOH/urea and LiCl/DMAc methods. For NaOH/urea method, alkali hydrates (OH-(H2O)x), urea hydrates (urea(H2O)y), and water were adsorbed into cellulose fiber to break hydrogen bonds between cellulose molecules yielding HG_Urea. For LiCl/DMAc method, the Lithium-DMAc complexes, [Li(DMAc)n]+Cl-, were seeped into cellulose fibers and the hydrogen bonds between the fibers were substituted by O-H…Cl-[Li(DMAc)n]+ bonds to produce transparent cellulose gel, HGL. Both freeze-dried hydrogels show the characteristics of cellulose vibrational modes and nano-sized fibrous SEM images. For water retention study, there was no significant difference when different amounts of HG_Urea were being used. Covering mung bean seeds directly helps improve the growth of roots, leaves and stems by 410, 28 and 27%, respectively. HGL and HGL in water were also tested on the germination of the mung bean seeds. As compared with HGL, the average lengths of roots, stems and leaves of mung bean on HGL-water were increased by 82, 32 and 14%, respectively
- 19 May 2022
- Published by Elsevier in Dyes and Pigments
- Vol. 204
The pigment analyses of Cambodian panel painting at national museum of Cambodia
- 19 May 2022
- Published by Elsevier in Dyes and Pigments
- Vol. 204
The pigment analyses of Cambodian panel painting at national museum of Cambodia
- Open Access
- 16 February 2022
- Published by Elsevier in Carbohydrate Polymer Technologies and Applications
- Vol. 3
Microencapsulation of camphor using trimethylsilylcellulose
- 16 February 2022
- Published by Elsevier in Carbohydrate Polymer Technologies and Applications
- Vol. 3
Open AccessMicroencapsulation of camphor using trimethylsilylcellulose
- 17 November 2021
- Published by Wiley in Color Research & Application
- Vol. 47 (3) , 796-805
Study on degradation of Cambodian panel painting during UV aging
- 17 November 2021
- Published by Wiley in Color Research & Application
- Vol. 47 (3) , 796-805
Study on degradation of Cambodian panel painting during UV aging
- 2 October 2017
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 757, 24-28
Studies on the Deterioration of the Cordon of the Most Illustrious Order of Chulachomklao
The Cordon of the Most Illustrious Order of Chulachomklao was one of the insignia that King Rama the fifth gave to the ladies of the court to present their goodness. One component of this object was made from silk and decorated by needled the silvered and golden thread as the laurel and the initial of King’s royal name. This ancient silk suffers from discoloration, low strength and severe deterioration. Amino acids in fibroin were photo-degraded under UV-irradiation and heat. Three silk samples, S-Raw, S-White and S-Ancient, were selected for ATR-FTIR and XRD analyses. FTIR spectroscopy can be used for the determination of the molecular structure of silk fibroin. The characteristic bands of silk fibroin corresponding to amide I, II, and III were found in all silk samples. The skeletal vibrations were also observed. Two degradation estimators, EAmideI/II and EcC=O2 were calculated and used to qualitatively estimate the degree of degradation due to oxidation and crystallinity of silk fibroin respectively. The results showed the higher degree of degradation and lower crystallinity of A-Ancient. The X-ray diffraction of S-Ancient showed the broader and weaker characteristic peaks at 2 theta of ∼ 20o indicating the lower crystallinity.
- 2 October 2017
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 757, 24-28
Studies on the Deterioration of the Cordon of the Most Illustrious Order of Chulachomklao
The Cordon of the Most Illustrious Order of Chulachomklao was one of the insignia that King Rama the fifth gave to the ladies of the court to present their goodness. One component of this object was made from silk and decorated by needled the silvered and golden thread as the laurel and the initial of King’s royal name. This ancient silk suffers from discoloration, low strength and severe deterioration. Amino acids in fibroin were photo-degraded under UV-irradiation and heat. Three silk samples, S-Raw, S-White and S-Ancient, were selected for ATR-FTIR and XRD analyses. FTIR spectroscopy can be used for the determination of the molecular structure of silk fibroin. The characteristic bands of silk fibroin corresponding to amide I, II, and III were found in all silk samples. The skeletal vibrations were also observed. Two degradation estimators, EAmideI/II and EcC=O2 were calculated and used to qualitatively estimate the degree of degradation due to oxidation and crystallinity of silk fibroin respectively. The results showed the higher degree of degradation and lower crystallinity of A-Ancient. The X-ray diffraction of S-Ancient showed the broader and weaker characteristic peaks at 2 theta of ∼ 20o indicating the lower crystallinity.
- 1 July 2010
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 347 (1) , 8-14
Facile synthesis of silica monolith doped with meso-tetra(p-carboxyphenyl)porphyrin as a novel metal ion sensor
- 1 July 2010
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 347 (1) , 8-14
Facile synthesis of silica monolith doped with meso-tetra(p-carboxyphenyl)porphyrin as a novel metal ion sensor