Antoine Floribert Mulaba-Bafubiandi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Antoine Floribert Mulaba-Bafubiandi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Hendrik Grobler
University of Johannesburg
3 shared publications - Ismail Adeniyi Okewale
Deparment of Mining Engineering, University of Johannesburg, DFC Johannesburg, Johannesburg, South Africa
3 shared publications - Derek Hugh Rose
Department of Geology, University of Johannesburg, Auckland Park, Kingsway Campus, 2006, South Africa
1 shared publication - Edison Muzenda
University of Johannesburg
1 shared publication - Fanus Viljoen
University of Johannesburg
1 shared publication - Feyisayo Victoria Adams
American University of Nigeria
1 shared publication
Latest Publications
- Open Access
- 20 August 2026
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 19 (9) , 175
Insights into compositional signatures and technical attributes of soils: a case of clays from tropics
In this paper, further insight has been provided on the index, geochemistry, mineralogy and compression characteristics of tropical clays. Tropical clays are vast in deposit and they are commonly encountered by practitioners and applied for diverse engineering applications. This was achieved by conducting index and physical tests, microstructural and elemental analyses using scanning electron microscope equipped with electron dispersive spectrometry SEM/EDS, geochemical analysis through X-ray fluorescence XRF, mineralogical analysis using X-ray diffraction XRD and oedometer tests on clay samples from Nigeria, Cameroun, Democratic Republic of Congo and South Africa. The mean particle size (D 50 ), fines content (Fc), coefficient of uniformity (Cu) and plasticity index (Ip) are 0.15 mm, 40.25%, 18.63 and 7.7% respectively, and this indicates that clays are relatively coarse, well-graded and have low plasticity. Clay fabrics are isotropic, homogeneous and characterized by separate particles and particle aggregation forming clusters with inter-particle and inter-cluster voids. Silicon, aluminum and iron are the major elemental compositions in clays with an average proportions of 54.07%, 23.30% and 13.22% respectively. The chemical compositions of clays are predominantly silica, alumina and hematite with an average proportions of 52.45%, 24.12% and 14.30% respectively. The mineralogy of clays is dominated by quartz, kaolinite and clinochlore with an average proportions of 51.01%, 48.43% and 15.75%. The clays have convergent behaviour and narrow range of initial specific volume (v) from 1.521 to 1.695. Clays have low compressibility (Cc) ranging from 0.15 to 0.20 which could be linked to chemical and mineralogical compositions. Compressibility of clays has strong effects on the intensity of weathering of clays.
- 20 August 2026
- Published by Springer Nature in Arabian Journal of Geosciences
- Vol. 19 (9) , 175
Open AccessInsights into compositional signatures and technical attributes of soils: a case of clays from tropics
In this paper, further insight has been provided on the index, geochemistry, mineralogy and compression characteristics of tropical clays. Tropical clays are vast in deposit and they are commonly encountered by practitioners and applied for diverse engineering applications. This was achieved by conducting index and physical tests, microstructural and elemental analyses using scanning electron microscope equipped with electron dispersive spectrometry SEM/EDS, geochemical analysis through X-ray fluorescence XRF, mineralogical analysis using X-ray diffraction XRD and oedometer tests on clay samples from Nigeria, Cameroun, Democratic Republic of Congo and South Africa. The mean particle size (D 50 ), fines content (Fc), coefficient of uniformity (Cu) and plasticity index (Ip) are 0.15 mm, 40.25%, 18.63 and 7.7% respectively, and this indicates that clays are relatively coarse, well-graded and have low plasticity. Clay fabrics are isotropic, homogeneous and characterized by separate particles and particle aggregation forming clusters with inter-particle and inter-cluster voids. Silicon, aluminum and iron are the major elemental compositions in clays with an average proportions of 54.07%, 23.30% and 13.22% respectively. The chemical compositions of clays are predominantly silica, alumina and hematite with an average proportions of 52.45%, 24.12% and 14.30% respectively. The mineralogy of clays is dominated by quartz, kaolinite and clinochlore with an average proportions of 51.01%, 48.43% and 15.75%. The clays have convergent behaviour and narrow range of initial specific volume (v) from 1.521 to 1.695. Clays have low compressibility (Cc) ranging from 0.15 to 0.20 which could be linked to chemical and mineralogical compositions. Compressibility of clays has strong effects on the intensity of weathering of clays.
- Open Access
- 5 June 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 140 (1) , 50
Risk-Based Inspection Applied to Cost Savings in Pumped Energy Storage Scheme Pressure Vessels
Pumped Energy Storage Schemes play a critical role in electricity grid stability and energy security by storing excess electricity for later use. Pressure vessels in these systems are subject to rigorous inspection regimes because of their potential risks to safety and performance. Traditional Time-Based Inspection, while effective, can be costly and inefficient. This paper investigates the application of Risk-Based Inspection methodologies to optimise inspection planning, reduce costs, and maintain safety in Pumped Energy Storage Scheme pressure vessels. The study presents a structured framework for implementing Risk-Based Inspection, demonstrates the potential for cost savings through comparative analysis, and highlights its alignment with regulatory requirements in South Africa.
- 5 June 2026
- Published by MDPI AG in Engineering Proceedings
- Vol. 140 (1) , 50
Open AccessRisk-Based Inspection Applied to Cost Savings in Pumped Energy Storage Scheme Pressure Vessels
Pumped Energy Storage Schemes play a critical role in electricity grid stability and energy security by storing excess electricity for later use. Pressure vessels in these systems are subject to rigorous inspection regimes because of their potential risks to safety and performance. Traditional Time-Based Inspection, while effective, can be costly and inefficient. This paper investigates the application of Risk-Based Inspection methodologies to optimise inspection planning, reduce costs, and maintain safety in Pumped Energy Storage Scheme pressure vessels. The study presents a structured framework for implementing Risk-Based Inspection, demonstrates the potential for cost savings through comparative analysis, and highlights its alignment with regulatory requirements in South Africa.
- Open Access
- 18 February 2025
- Published by Springer Nature in Discover Geoscience
- Vol. 3 (1) , 1-14
Assessment of the effects of chemical constituents of siliciclastic sedimentary sands on their mechanical behaviour
- 18 February 2025
- Published by Springer Nature in Discover Geoscience
- Vol. 3 (1) , 1-14
Open AccessAssessment of the effects of chemical constituents of siliciclastic sedimentary sands on their mechanical behaviour
- Open Access
- 14 September 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9 (10) , 1-10
Assessment of carbonate rocks for engineering applications considering mineralogical, geochemical and geotechnical attributes
Due to continuous need of materials for infrastructural development, geomaterials of different origins are used where available. Vast majority of these materials in some countries are predominantly metamorphic and sedimentary in nature. Many of these rocks are of carbonate origin and they are encountered by practitioners worldwide. Therefore, it is very crucial to evaluate the prospect of using carbonate rocks for different applications. In this paper, laboratory tests were conducted on soft and hard carbonate rocks in order to assess their usefulness taking into consideration the mineralogy, geochemistry and geotechnics. The mineralogy is majorly calcite, the fabric is characterized by aggregation of particles to form clusters and the chemical composition is predominantly calcium oxide. The hard carbonate rocks have low porosity, medium dynamic fragmentation, medium to low water absorption, slightly strong rebound hardness value, high uniaxial compressive strength and soft carbonate rocks have low in situ specific volume and compressibility. The carbonate rocks are suitable for cement production. The hard carbonate rocks can be used for infrastructure purposes. The soft carbonate rocks are suitable for use as foundation fill materials and suitable for use as sub-grade materials. However, practitioners must be cautious when using this material as sub-base materials.
- 14 September 2024
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 9 (10) , 1-10
Open AccessAssessment of carbonate rocks for engineering applications considering mineralogical, geochemical and geotechnical attributes
Due to continuous need of materials for infrastructural development, geomaterials of different origins are used where available. Vast majority of these materials in some countries are predominantly metamorphic and sedimentary in nature. Many of these rocks are of carbonate origin and they are encountered by practitioners worldwide. Therefore, it is very crucial to evaluate the prospect of using carbonate rocks for different applications. In this paper, laboratory tests were conducted on soft and hard carbonate rocks in order to assess their usefulness taking into consideration the mineralogy, geochemistry and geotechnics. The mineralogy is majorly calcite, the fabric is characterized by aggregation of particles to form clusters and the chemical composition is predominantly calcium oxide. The hard carbonate rocks have low porosity, medium dynamic fragmentation, medium to low water absorption, slightly strong rebound hardness value, high uniaxial compressive strength and soft carbonate rocks have low in situ specific volume and compressibility. The carbonate rocks are suitable for cement production. The hard carbonate rocks can be used for infrastructure purposes. The soft carbonate rocks are suitable for use as foundation fill materials and suitable for use as sub-grade materials. However, practitioners must be cautious when using this material as sub-base materials.
- Open Access
A Process Mineralogical Evaluation of Chromite at the Nkomati Nickel Mine, Uitkomst Complex, South Africa
A process mineralogical study based on three texturally and mineralogically different chromite-bearing ore types at the Nkomati nickel mine was undertaken, with focus on chromite. Chromite is a by-product of the Ni-Cu-Co-PGE ore at Nkomati Nickel mine. These being the PCMZ_MG (medium-grade Ni-Cu sulphide silicate ore with disseminated chromite), PCMZ_HG (high-grade Ni-Cu sulphide silicate ore containing disseminated chromite) and MCHR (massive chromite unit) ore types. These were processed using benchtop flotation followed by gravity concentration using a shaking table at different grind sizes. Quantitative mineralogical data was obtained using a 600F Mineral Liberation Analyser for the unprocessed and processed ores at three selected target grinds. The Mineral Liberation Analyser data indicated that increased milling does not relate to increased chromite grades and recoveries, particularly for the disseminated PCMZ type ores based on laboratory-scale gravity concentration. The recovery is controlled largely by the chromite chemistry. The results also showed that the MCHR samples that underwent a pre-flotation stage before gravity separation had better Cr2O3 grades (45% to 47%) and recoveries (52% to 61%) than MCHR ore that did not undergo a pre-flotation stage, which recorded grades ranging from 44% to 46% and recoveries ranging from 43% to 60%. This holds promise for the blending of MCHR ores with the PCMZ ores. The PCMZ ores also displayed better Cr2O3 grades and recoveries at coarser grinds. The optimal target grind to process all three ore types is a P80 of 75 μm, which is the current grind size employed at Nkomati Nickel mine. Due to the low nickel price and grade the Nkomati Nickel mine is currently under care and maintenance.
Open AccessA Process Mineralogical Evaluation of Chromite at the Nkomati Nickel Mine, Uitkomst Complex, South Africa
A process mineralogical study based on three texturally and mineralogically different chromite-bearing ore types at the Nkomati nickel mine was undertaken, with focus on chromite. Chromite is a by-product of the Ni-Cu-Co-PGE ore at Nkomati Nickel mine. These being the PCMZ_MG (medium-grade Ni-Cu sulphide silicate ore with disseminated chromite), PCMZ_HG (high-grade Ni-Cu sulphide silicate ore containing disseminated chromite) and MCHR (massive chromite unit) ore types. These were processed using benchtop flotation followed by gravity concentration using a shaking table at different grind sizes. Quantitative mineralogical data was obtained using a 600F Mineral Liberation Analyser for the unprocessed and processed ores at three selected target grinds. The Mineral Liberation Analyser data indicated that increased milling does not relate to increased chromite grades and recoveries, particularly for the disseminated PCMZ type ores based on laboratory-scale gravity concentration. The recovery is controlled largely by the chromite chemistry. The results also showed that the MCHR samples that underwent a pre-flotation stage before gravity separation had better Cr2O3 grades (45% to 47%) and recoveries (52% to 61%) than MCHR ore that did not undergo a pre-flotation stage, which recorded grades ranging from 44% to 46% and recoveries ranging from 43% to 60%. This holds promise for the blending of MCHR ores with the PCMZ ores. The PCMZ ores also displayed better Cr2O3 grades and recoveries at coarser grinds. The optimal target grind to process all three ore types is a P80 of 75 μm, which is the current grind size employed at Nkomati Nickel mine. Due to the low nickel price and grade the Nkomati Nickel mine is currently under care and maintenance.
- Open Access
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (34) , 15772-15781
Synthesis and characterization of polysulphone/clay membrane: effect of natural clay differences
Polysulphone/clay ion-exchange membranes were prepared by the phase inversion method using N-methyl-2 pyrrolidone as solvent. The aims of this work were to synthesize and investigate the effect of different natural clays from different locations on the morphology, hydrophilicity, structure, swellability, metal extraction from water and ion-exchange capacity (IEC) of the membranes prepared. The characterization techniques used were scanning electron microscopy, X‐ray diffractometry, Fourier transform infra-red spectroscopy and contact angle. The clays from locations 1 (N4) and 2 (N6) had a good dispersion in the polysulphone matrix and exhibited high IEC, swellability and hydrophilicity. The 2θ of the polysulphone/clay membranes compared to polysulphone membrane was lower, indicating an increase in the d-spacing between layers of the clays and also intercalation of clay layer silicates in the polymer matrix. Extraction/adsorption of Pb2+ by all the tested membranes was faster (10 min) compared to Cu2+, and it was approximately 100%.
- 1 July 2016
- Published by Elsevier in Desalination and Water Treatment
- Vol. 57 (34) , 15772-15781
Open AccessSynthesis and characterization of polysulphone/clay membrane: effect of natural clay differences
Polysulphone/clay ion-exchange membranes were prepared by the phase inversion method using N-methyl-2 pyrrolidone as solvent. The aims of this work were to synthesize and investigate the effect of different natural clays from different locations on the morphology, hydrophilicity, structure, swellability, metal extraction from water and ion-exchange capacity (IEC) of the membranes prepared. The characterization techniques used were scanning electron microscopy, X‐ray diffractometry, Fourier transform infra-red spectroscopy and contact angle. The clays from locations 1 (N4) and 2 (N6) had a good dispersion in the polysulphone matrix and exhibited high IEC, swellability and hydrophilicity. The 2θ of the polysulphone/clay membranes compared to polysulphone membrane was lower, indicating an increase in the d-spacing between layers of the clays and also intercalation of clay layer silicates in the polymer matrix. Extraction/adsorption of Pb2+ by all the tested membranes was faster (10 min) compared to Cu2+, and it was approximately 100%.
- 6 September 2012
- Published by Springer Nature
- p. 249-261
Investigation of Cu (II) Removal from Synthetic Solution by Ion Exchange Using South African Clinoptilolite
- 6 September 2012
- Published by Springer Nature
- p. 249-261
Investigation of Cu (II) Removal from Synthetic Solution by Ion Exchange Using South African Clinoptilolite