Massimiliano Zanin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Massimiliano Zanin has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- William Skinner
Future Industries Institute, University of South Australia, Mawson Lakes, SA 5095, Australia
2 shared publications B. Klein
1 shared publicationD. Robinson
1 shared publication- Daniel Fornasiero
Ian Wark Research Institute, University of South Australia, Mawson Lakes Campus, Mawson Lakes, Adelaide, SA 5095, Australia
1 shared publication - George Blankson Abaka-Wood
Future Industries Institute, College of Engineering and Information Technology, Adelaide University, Mawson Lakes Campus, Adelaide, SA 5095, Australia
1 shared publication J. Addai-Mensah
1 shared publication
Latest Publications
- Open Access
Reprocessing of Sulphide Flotation Tailings for Copper Recovery: Characterisation
This study characterises low-grade copper ore tailings from a conventional flotation circuit to evaluate their feasibility for further processing. A suite of advanced analytical techniques, such as X-ray fluorescence (XRF), inductively coupled plasma (ICP), X-ray diffraction (XRD), and the quantitative evaluation of minerals by scanning electron microscopy (QEMSCAN), was employed to assess the elemental, chemical, and mineralogical composition of the tailings. Chalcopyrite was identified as the dominant copper-bearing mineral phase, predominantly locked within iron oxides and silicate gangue minerals. The QEMSCAN results showed that chalcopyrite was only partially liberated, which highlights the complex mineral intergrowths that hinder efficient recovery. Based on the mineralogical characteristics, the applicability of various processing techniques, including conventional froth flotation, advanced flotation methods [including HydrofloatTM, Jameson, and the Reflux Flotation Cell (RFC)], magnetic separation, and gravity separation, was evaluated. Overall, this study indicates that incorporating HydroFloat™, the Jameson Cell, and the RFC into the flotation circuit could greatly improve copper recovery from tailings. This study also identified rare earth elements (REEs) as potential by-products of copper recovery, so it is an additional opportunity for resource recovery. This paper contributes to sustainable mining practices and resource optimization by highlighting the characteristics and recovery of valuable minerals from tailings.
Open AccessReprocessing of Sulphide Flotation Tailings for Copper Recovery: Characterisation
This study characterises low-grade copper ore tailings from a conventional flotation circuit to evaluate their feasibility for further processing. A suite of advanced analytical techniques, such as X-ray fluorescence (XRF), inductively coupled plasma (ICP), X-ray diffraction (XRD), and the quantitative evaluation of minerals by scanning electron microscopy (QEMSCAN), was employed to assess the elemental, chemical, and mineralogical composition of the tailings. Chalcopyrite was identified as the dominant copper-bearing mineral phase, predominantly locked within iron oxides and silicate gangue minerals. The QEMSCAN results showed that chalcopyrite was only partially liberated, which highlights the complex mineral intergrowths that hinder efficient recovery. Based on the mineralogical characteristics, the applicability of various processing techniques, including conventional froth flotation, advanced flotation methods [including HydrofloatTM, Jameson, and the Reflux Flotation Cell (RFC)], magnetic separation, and gravity separation, was evaluated. Overall, this study indicates that incorporating HydroFloat™, the Jameson Cell, and the RFC into the flotation circuit could greatly improve copper recovery from tailings. This study also identified rare earth elements (REEs) as potential by-products of copper recovery, so it is an additional opportunity for resource recovery. This paper contributes to sustainable mining practices and resource optimization by highlighting the characteristics and recovery of valuable minerals from tailings.
- Open Access
Flotation of Chalcopyrite and Molybdenite in the Presence of Organics in Water
One of the water constituents that has not been investigated in great detail for potential detrimental effect on mineral flotation is organic matter. This study investigates the effect of natural organic materials contained in water, such as humic, fulvic and tannic acids, on the flotation of copper and molybdenum sulphides in alkaline conditions and in concentrations similar to those found in natural waters. Results show that copper and molybdenum grades decreased with the addition of humic, tannic and fulvic acid in that order, with a larger depression of molybdenite grade and recovery. Adsorption studies using ultraviolet (UV)-visible spectroscopy and X-ray photoelectron spectrometer (XPS) surface analysis confirmed that these organic materials were adsorbed on the minerals surface. Complimentary analyses of froth characteristics, particle size distribution and fine particles entrainment were also conducted to explain the cause of the negative effect of these organic materials on flotation. The flotation results were explained in terms of the decrease in the hydrophobicity of the mineral surfaces due to the adsorption of hydrophilic groups in these organic materials which then prevent bubble-particle adhesion. The larger detrimental effect of humic acid is due to its higher adsorption on the minerals, high molecular weight and carbon content compared with the other organic acids used.
Open AccessFlotation of Chalcopyrite and Molybdenite in the Presence of Organics in Water
One of the water constituents that has not been investigated in great detail for potential detrimental effect on mineral flotation is organic matter. This study investigates the effect of natural organic materials contained in water, such as humic, fulvic and tannic acids, on the flotation of copper and molybdenum sulphides in alkaline conditions and in concentrations similar to those found in natural waters. Results show that copper and molybdenum grades decreased with the addition of humic, tannic and fulvic acid in that order, with a larger depression of molybdenite grade and recovery. Adsorption studies using ultraviolet (UV)-visible spectroscopy and X-ray photoelectron spectrometer (XPS) surface analysis confirmed that these organic materials were adsorbed on the minerals surface. Complimentary analyses of froth characteristics, particle size distribution and fine particles entrainment were also conducted to explain the cause of the negative effect of these organic materials on flotation. The flotation results were explained in terms of the decrease in the hydrophobicity of the mineral surfaces due to the adsorption of hydrophilic groups in these organic materials which then prevent bubble-particle adhesion. The larger detrimental effect of humic acid is due to its higher adsorption on the minerals, high molecular weight and carbon content compared with the other organic acids used.
- 1 January 2015
- Published by Taylor & Francis in CIM Journal
- Vol. 6 (1) , 15-26
Introduction to the stirred milling of nickel laterites for upgrading nickel
- 1 January 2015
- Published by Taylor & Francis in CIM Journal
- Vol. 6 (1) , 15-26
Introduction to the stirred milling of nickel laterites for upgrading nickel
- Open Access
- 1 June 2012
- Published by FapUNIFESP (SciELO) in Rem: Revista Escola de Minas
- Vol. 65 (2) , 271-278
Parâmetros de dispersão de ar em células mecânicas de flotação em usinas brasileiras
O objetivo desse trabalho é apresentar e discutir a determinação dos parâmetros de dispersão de ar em células mecânicas de flotação, em circuitos industriais brasileiros. Foram investigados os circuitos rougher e scavenger das usinas RPM, Taquari-Vassouras, Copebras e Fosfértil-Catalão (atual Vale Fertilizantes). Nas usinas RPM e Taquari-Vassouras, foram determinados a velocidade superficial do ar (Jg), o hold-up do ar (εg), o diâmetro médio de bolhas (d32) e o fluxo de área superficial de bolhas (Sb). Para as outras usinas, foram determinados somente o Jg e εg. Os resultados mostraram que, com exceção da RPM, todos os circuitos investigados apresentaram baixos valores para os parâmetros de dispersão do ar. Taquari-Vassouras apresentou os mais baixos valores médios para Jg e εg, respectivamente, 0,05 cm/s e 5%. Os maiores valores de Jg foram determinados no circuito rougher da Copebras, 1,17 cm/s, ao passo que a RPM apresentou os maiores valores para o hold-up e tamanho de bolha, respectivamente, 31% e 2,61mm. Os valores obtidos, para Sb, situaram-se abaixo daqueles reportados na literatura.
- 1 June 2012
- Published by FapUNIFESP (SciELO) in Rem: Revista Escola de Minas
- Vol. 65 (2) , 271-278
Open AccessParâmetros de dispersão de ar em células mecânicas de flotação em usinas brasileiras
O objetivo desse trabalho é apresentar e discutir a determinação dos parâmetros de dispersão de ar em células mecânicas de flotação, em circuitos industriais brasileiros. Foram investigados os circuitos rougher e scavenger das usinas RPM, Taquari-Vassouras, Copebras e Fosfértil-Catalão (atual Vale Fertilizantes). Nas usinas RPM e Taquari-Vassouras, foram determinados a velocidade superficial do ar (Jg), o hold-up do ar (εg), o diâmetro médio de bolhas (d32) e o fluxo de área superficial de bolhas (Sb). Para as outras usinas, foram determinados somente o Jg e εg. Os resultados mostraram que, com exceção da RPM, todos os circuitos investigados apresentaram baixos valores para os parâmetros de dispersão do ar. Taquari-Vassouras apresentou os mais baixos valores médios para Jg e εg, respectivamente, 0,05 cm/s e 5%. Os maiores valores de Jg foram determinados no circuito rougher da Copebras, 1,17 cm/s, ao passo que a RPM apresentou os maiores valores para o hold-up e tamanho de bolha, respectivamente, 31% e 2,61mm. Os valores obtidos, para Sb, situaram-se abaixo daqueles reportados na literatura.