Mucio Costa Campos Filho
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mucio Costa Campos Filho has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Antonio Sergio Bezerra Sombra
Federal University of Ceará (UFC)
3 shared publications - Antonio Jefferson Mangueira Sales
Laboratório de Telecomunicações e Ciência e Engenharia de Materiais (LOCEM), Núcleo de Tecnologia e Qualidade Industrial do Ceará - Nutec, Campus do Pici, Universidade Federal do Ceará (UFC), Fortaleza, CE, Brasil
2 shared publications A.N.L Marques
1 shared publication- Alexandre Araújo Costa
Universidade Estadual do Ceará, Brasil
1 shared publication - Alexandre Gonçalves Pinheiro
Universidade Federal do Ceará
1 shared publication Antonio Carlos Santana dos Santos
Universidade Estadual do Ceará, Brasil
1 shared publication
Latest Publications
- Open Access
Influence on Pitting Corrosion Resistance of AISI 301LN and 316L Stainless Steels Subjected to Cold-Induced Deformation
Austenitic stainless steels that exhibit good corrosion resistance have recently found increasing applications in industry and transportation. This article addresses the influence of cold rolling and deformation on the pitting corrosion resistance of AISI 301LN and 316L stainless steels. The results indicate that the content of martensite increases as the cold rolling reduction also increases. The current work combined different techniques such as optical microscopy and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses. Corrosion tests were carried out, in accordance with the ASTM standards. The results confirm that the 316L steel performed better than the 301LN, regarding pitting corrosion, even when deformed. This is due to the high molybdenum (Mo) content, which guarantees greater corrosion resistance. The conducted corrosion tests showed that the increase of cold deformation reduces the resistance to pitting and overall corrosion in both steels. It was found that the 301LN stainless steel has higher susceptibility to deformation-induced martensite and, despite the addition of nitrogen, it still has a lower performance relative to the 316L steel. The current work focused on evaluating the formation of pits and the dynamics of the microstructures of the AISI 301LN and 316L steels with their mechanical properties and corrosion resistance in a saline environment including chlorides.
Open AccessInfluence on Pitting Corrosion Resistance of AISI 301LN and 316L Stainless Steels Subjected to Cold-Induced Deformation
Austenitic stainless steels that exhibit good corrosion resistance have recently found increasing applications in industry and transportation. This article addresses the influence of cold rolling and deformation on the pitting corrosion resistance of AISI 301LN and 316L stainless steels. The results indicate that the content of martensite increases as the cold rolling reduction also increases. The current work combined different techniques such as optical microscopy and scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS) analyses. Corrosion tests were carried out, in accordance with the ASTM standards. The results confirm that the 316L steel performed better than the 301LN, regarding pitting corrosion, even when deformed. This is due to the high molybdenum (Mo) content, which guarantees greater corrosion resistance. The conducted corrosion tests showed that the increase of cold deformation reduces the resistance to pitting and overall corrosion in both steels. It was found that the 301LN stainless steel has higher susceptibility to deformation-induced martensite and, despite the addition of nitrogen, it still has a lower performance relative to the 316L steel. The current work focused on evaluating the formation of pits and the dynamics of the microstructures of the AISI 301LN and 316L steels with their mechanical properties and corrosion resistance in a saline environment including chlorides.
- Open Access
- 22 October 2022
- Published by Universidade Estadual de Feira de Santana in Caderno de Física da UEFS
- Vol. 20 (02) , 2502.1-15
ENSINO DE CIÊNCIAS ATRAVÉS DA MOSTRA BRASILEIRA DE FOGUETES (MOBFOG)
Este artigo aborda a Mostra Brasileira de Foguetes (MOBFOG) como uma ferramenta para o ensino de ciências e, para tal abordagem, é feita uma breve revisão bibliográfica sobre o ensino de ciências assim como acerca da MOBFOG em tal âmbito. Além disso, para entender as potencialidades das práticas com foguetes, são analisadas as respostas de um formulário eletrônico aplicado a estudantes que participaram da competição.
- 22 October 2022
- Published by Universidade Estadual de Feira de Santana in Caderno de Física da UEFS
- Vol. 20 (02) , 2502.1-15
Open AccessENSINO DE CIÊNCIAS ATRAVÉS DA MOSTRA BRASILEIRA DE FOGUETES (MOBFOG)
Este artigo aborda a Mostra Brasileira de Foguetes (MOBFOG) como uma ferramenta para o ensino de ciências e, para tal abordagem, é feita uma breve revisão bibliográfica sobre o ensino de ciências assim como acerca da MOBFOG em tal âmbito. Além disso, para entender as potencialidades das práticas com foguetes, são analisadas as respostas de um formulário eletrônico aplicado a estudantes que participaram da competição.
- 8 February 2018
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 32 (11) , 1329-1341
Structural and electrical properties of the SrBi4Ti4O15: V2O5matrix in the microwave frequency range
In this present work, material has been developed to have thermal stability over microwave range. The SrBi4Ti4O15 ceramics are perovskite material from Aurivillius family and were produced by solid state reaction method with temperatures lower than other recent works reported. X-ray diffraction patterns have confirmed single phase and afterward the sample data were refined by using Rietveld method. V2O5 was added to the pure specimen with different amounts (5, 10 and 15 wt.%) to possibly enhance electrical and dielectric properties of SrBi4Ti4O15. An impedance analyzer and a network analyzer were used to obtain electrical measurements in the range of microwave. Thermal stability measures over a microwave range were used as well as numerical simulations of dielectric resonator antenna (DRA) using the HFSS software. The obtained results have shown an efficient synthesis, and the dielectric constants indicate a real possibility of miniaturization. It was also found that the specimen for 6 wt.% of V2O5 presented temperature coefficient (τ f ) near zero at microwave region. The bandwidths measured from the specimens were classified as S-type with wide bandwidth and it can be applied for meteorological radars and satellite communications.
- 8 February 2018
- Published by Taylor & Francis in Journal of Electromagnetic Waves and Applications
- Vol. 32 (11) , 1329-1341
Structural and electrical properties of the SrBi4Ti4O15: V2O5matrix in the microwave frequency range
In this present work, material has been developed to have thermal stability over microwave range. The SrBi4Ti4O15 ceramics are perovskite material from Aurivillius family and were produced by solid state reaction method with temperatures lower than other recent works reported. X-ray diffraction patterns have confirmed single phase and afterward the sample data were refined by using Rietveld method. V2O5 was added to the pure specimen with different amounts (5, 10 and 15 wt.%) to possibly enhance electrical and dielectric properties of SrBi4Ti4O15. An impedance analyzer and a network analyzer were used to obtain electrical measurements in the range of microwave. Thermal stability measures over a microwave range were used as well as numerical simulations of dielectric resonator antenna (DRA) using the HFSS software. The obtained results have shown an efficient synthesis, and the dielectric constants indicate a real possibility of miniaturization. It was also found that the specimen for 6 wt.% of V2O5 presented temperature coefficient (τ f ) near zero at microwave region. The bandwidths measured from the specimens were classified as S-type with wide bandwidth and it can be applied for meteorological radars and satellite communications.
- 1 March 2017
- Published by Elsevier in Journal of Luminescence
- Vol. 183, 102-107
Up-conversion emission of Er 3+ /Yb 3+ co-doped BaBi 2 Nb 2 O 9 (BBN) phosphors
- 1 March 2017
- Published by Elsevier in Journal of Luminescence
- Vol. 183, 102-107
Up-conversion emission of Er 3+ /Yb 3+ co-doped BaBi 2 Nb 2 O 9 (BBN) phosphors
- Open Access
- 1 July 2012
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Meteorologia
- Vol. 27 (2) , 139-151
Características de cristais de gelo observados em um sistema de nuvens na Amazônia durante o experimento TRMM-LBA
Durante os meses de janeiro e fevereiro de 1999 foi realizada a campanha do TRMM/LBA (Tropical Rainfall Measuring Mission/Large Scale Biosphere-Atmosphere Experiment in Amazonia), na qual foram investigadas propriedades microfísicas de nuvens convectivas profundas. Este experimento fez parte de um esforço internacional para calibrar os equipamentos, no satélite TRMM, com o objetivo de estudar processos físicos tais como precipitação, radiação e eletricidade atmosférica. Os dados utilizados neste trabalho foram obtidos por instrumentos instalados na aeronave Citation II pertencente à Universidade de Dakota do Norte, USA, que incluem um conjunto de sondas espectrométricas, as quais medem a concentração e tamanho de partículas de gelo e de água, com destaque para a sonda bidimensional 2DC (Two-dimensional Cloud probe). Esta sonda identifica não apenas concentração e tamanho dos hidrometeoros, mas também as diferentes formas dos cristais de gelo. A aeronave realizou diversos vôos no experimento TRMM/LBA, sendo escolhido para análise o dia 10 de fevereiro de 1999. Foram observados cristais de gelo com uma grande variedade de formas e dimensões. Verificou-se certa concordância entre a forma dos cristais e os padrões de temperatura e umidade presente no ambiente, assim como foram observadas superposições de hábitos de cristais, sugerindo a existência de mistura entre diferentes regiões das nuvens e indicando que a sedimentação dos cristais pode ter grande importância para a evolução das propriedades microfísicas de nuvens convectivas profundas. Foi observado que a distribuição de tamanho dos cristais de gelo em função do diâmetro segue uma lei de potência.
- 1 July 2012
- Published by FapUNIFESP (SciELO) in Revista Brasileira de Meteorologia
- Vol. 27 (2) , 139-151
Open AccessCaracterísticas de cristais de gelo observados em um sistema de nuvens na Amazônia durante o experimento TRMM-LBA
Durante os meses de janeiro e fevereiro de 1999 foi realizada a campanha do TRMM/LBA (Tropical Rainfall Measuring Mission/Large Scale Biosphere-Atmosphere Experiment in Amazonia), na qual foram investigadas propriedades microfísicas de nuvens convectivas profundas. Este experimento fez parte de um esforço internacional para calibrar os equipamentos, no satélite TRMM, com o objetivo de estudar processos físicos tais como precipitação, radiação e eletricidade atmosférica. Os dados utilizados neste trabalho foram obtidos por instrumentos instalados na aeronave Citation II pertencente à Universidade de Dakota do Norte, USA, que incluem um conjunto de sondas espectrométricas, as quais medem a concentração e tamanho de partículas de gelo e de água, com destaque para a sonda bidimensional 2DC (Two-dimensional Cloud probe). Esta sonda identifica não apenas concentração e tamanho dos hidrometeoros, mas também as diferentes formas dos cristais de gelo. A aeronave realizou diversos vôos no experimento TRMM/LBA, sendo escolhido para análise o dia 10 de fevereiro de 1999. Foram observados cristais de gelo com uma grande variedade de formas e dimensões. Verificou-se certa concordância entre a forma dos cristais e os padrões de temperatura e umidade presente no ambiente, assim como foram observadas superposições de hábitos de cristais, sugerindo a existência de mistura entre diferentes regiões das nuvens e indicando que a sedimentação dos cristais pode ter grande importância para a evolução das propriedades microfísicas de nuvens convectivas profundas. Foi observado que a distribuição de tamanho dos cristais de gelo em função do diâmetro segue uma lei de potência.