CMChris Miller

Chris Miller

*This is an algorithmically generated author record based on publicly available information.

Research Subjects


Chris Miller has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    BRAZOS RIVER FLOOD GATE PROJECT: UNDERSTANDING HYDRODYNAMICS AND SEDIMENTATION USING NUMERICAL AND PHYSICAL MODELS

    by Himangshu Shekhar Das, Aaron Aaron Buesing, Chris Miller, Roham Roham Bakhtyar, Michael Ritz, Rob Dauenhauer, Orlando Ramos

    Brazos River Floodgates (BRFG) are located where the Gulf Intracoastal Waterway (GIWW) intersects with the Brazos River southwest of the city of Freeport in Brazoria County, Texas. The gates were initially installed in the early 1940s to prevent heavy sediment loads in the Brazos River from entering the GIWW. The structures were installed at a time when most tugboats pulled barges behind them, rather than using the modern pushing method. The gate openings are 75 feet wide, which is narrower than the 125 feet wide and 12 feet deep GIWW navigation channel. Although regulations restrict the width of tows to 55 feet, oversize tow permits are routinely granted for tows as wide as 108 feet, particularly along the upper Texas coast. To move these wider tows through the BRFG, vessel operators must park the tows, break the barges apart, move them through the gates in smaller sets or individually, and reconnect the tows on the other side. This process, known as “tripping,” is inefficient and causes delays that result in substantial costs to the towing industry each year. Difficulty in navigation through the BRFG results in temporary navigation restrictions and/or closures imposed by the USACE and U.S. Coast Guard. These restrictions and closures result in additional delays and economic impact to the towing industry.

  • Numerical Modeling of Probable Maximum Flood Flowing through a System of Spillways

    by Songheng Li, Stuart Cain, Martin Wosnik, Chris Miller, Hasan Kocahan, Russell Wyckoff

    The results of a numerical model study of probable maximum flood (PMF) flow through a system of spillways consisting of an existing service spillway and a new auxiliary spillway are presented. A commercial computational fluid dynamics (CFD) code, Fluent, was used to solve the time-dependent Reynolds-averaged Navier-Stokes equations, a standard turbulence k-ε model with wall functions, and a water volume of fluid fraction equation. A two-dimensional approach velocity profile was used at the upstream inlet cross section. Water levels, flow splits between the existing and auxiliary spillways, and flow patterns were predicted and compared. A tentative design was chosen, constructed, and tested in a 1:54 scale physical model. Testing results were used to validate the CFD model. Results demonstrate that the CFD model is validated as accurate in the prediction of water levels in the reservoir, the integrated approach used is cost-effective and efficient in optimizing the designs of the auxiliary spillway, the tentative design cannot pass the PMF at the maximum pool level which suggests further modifications being necessary in the physical model.