Ravindra Jayaratne
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Research Interests
Ravindra Jayaratne has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Tomoya Shibayama
Chuo University
3 shared publications - Abimbola Adewale
University of East London University of East London University of East London
2 shared publications - Miguel Esteban
Waseda University
2 shared publications - Takahito Mikami
Waseda University
2 shared publications - Alison Raby
Centre for Coastal and Ocean Processes and Engineering University of Plymouth Plymouth UK
1 shared publication - Buddhika Premaratne
School of Architecture, Computing and Engineering, University of East London , Docklands Campus, 4–6 University Way, London E16 2RD, UK
1 shared publication
Latest Publications
- Open Access
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 126
EXPERIMENTAL AND NUMERICAL STUDY OF THE HYDRO-SEDIMENTARY DYNAMICS ON THE LAND SIDE OF A COASTAL DIKE
Coastal dikes are commonly found coastal defense structures in many tsunami-prone areas. They have proven effective in safeguarding coastal communities and valuable coastal assets during tsunamis and other extreme wave events. Nevertheless, the presence of such structures in the coastal area significantly influences the hydro-sedimentary dynamics of the neighboring coastal region. Moreover, wave overtopping on these protective structures lead to local erosion, referred to as scour. Scour has direct relationship on the stability of the structure, causes infrastructure damage, and poses risks to people on the landward side. In spite of numerous numerical studies addressing scour patterns, only a few studies have considered the influence of coastal dike geometry on tsunami-induced scour at the landside. Consequently, this research paper focus on numerically examining the hydro- sedimentary dynamics occurring at the leeward side of a coastal dike. The study incorporates the tsunami-induced scour predictive model established by Jayaratne et al. (2016), which was developed through extensive laboratory experiments and validated using a hydrodynamic model based on the Reynolds-Averaged Navier-Stokes (RANS) approach, as well as a sediment transport model founded on the turbulence-averaged Eulerian two-phase flow equations.
- 29 May 2025
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 38,p. 126
Open AccessEXPERIMENTAL AND NUMERICAL STUDY OF THE HYDRO-SEDIMENTARY DYNAMICS ON THE LAND SIDE OF A COASTAL DIKE
Coastal dikes are commonly found coastal defense structures in many tsunami-prone areas. They have proven effective in safeguarding coastal communities and valuable coastal assets during tsunamis and other extreme wave events. Nevertheless, the presence of such structures in the coastal area significantly influences the hydro-sedimentary dynamics of the neighboring coastal region. Moreover, wave overtopping on these protective structures lead to local erosion, referred to as scour. Scour has direct relationship on the stability of the structure, causes infrastructure damage, and poses risks to people on the landward side. In spite of numerous numerical studies addressing scour patterns, only a few studies have considered the influence of coastal dike geometry on tsunami-induced scour at the landside. Consequently, this research paper focus on numerically examining the hydro- sedimentary dynamics occurring at the leeward side of a coastal dike. The study incorporates the tsunami-induced scour predictive model established by Jayaratne et al. (2016), which was developed through extensive laboratory experiments and validated using a hydrodynamic model based on the Reynolds-Averaged Navier-Stokes (RANS) approach, as well as a sediment transport model founded on the turbulence-averaged Eulerian two-phase flow equations.
- 3 April 2024
- Published by Springer Nature in Natural Hazards
- Vol. 120 (9) , 8263-8282
Integrating communities’ perspectives in understanding disaster risk
- 3 April 2024
- Published by Springer Nature in Natural Hazards
- Vol. 120 (9) , 8263-8282
Integrating communities’ perspectives in understanding disaster risk
- Open Access
- 1 September 2023
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 37,p. 72
FAILURE OF SEAWALLS DUE TO TSUNAMI-INDUCED SCOUR
The Indian Ocean tsunami in 2004 and the Tohoku tsunami in 2011 have shown that tsunami-induced scour is one of the primary reasons for the failure of coastal defence structures (Bricker et al., 2012; Jayaratne et al., 2016). In a coastal structure, scour can occur when the plunging jet impacts the landward toe of the structure, resulting in digging a hole around the foundation which eventually may destabilize the structure. This can be exacerbated by rapid drawdown induced liquefaction during the receding wave, and can lead to the failure of the structure. Therefore, accurate prediction of local and plunging scour is very vital in order to ensure the safety of the coastal structures under such conditions. Data we have at present are based on final or equilibrium scour depths, not the maximum scour depths. Survey teams measure scour profile once the extreme event is over. However, the trough or scour hole made can be partly filled by sediment transport from upstream (in the live bed case) or from sediment suspended within the scour hole that settles after the flow slows down. Thus, the scour depth survey teams measure are less than the actual maximum depths. Therefore, a novel experimental and numerical study is proposed to tackle this problem with the funding of the Royal Society, UK.
- 1 September 2023
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- No. 37,p. 72
Open AccessFAILURE OF SEAWALLS DUE TO TSUNAMI-INDUCED SCOUR
The Indian Ocean tsunami in 2004 and the Tohoku tsunami in 2011 have shown that tsunami-induced scour is one of the primary reasons for the failure of coastal defence structures (Bricker et al., 2012; Jayaratne et al., 2016). In a coastal structure, scour can occur when the plunging jet impacts the landward toe of the structure, resulting in digging a hole around the foundation which eventually may destabilize the structure. This can be exacerbated by rapid drawdown induced liquefaction during the receding wave, and can lead to the failure of the structure. Therefore, accurate prediction of local and plunging scour is very vital in order to ensure the safety of the coastal structures under such conditions. Data we have at present are based on final or equilibrium scour depths, not the maximum scour depths. Survey teams measure scour profile once the extreme event is over. However, the trough or scour hole made can be partly filled by sediment transport from upstream (in the live bed case) or from sediment suspended within the scour hole that settles after the flow slows down. Thus, the scour depth survey teams measure are less than the actual maximum depths. Therefore, a novel experimental and numerical study is proposed to tackle this problem with the funding of the Royal Society, UK.
- Open Access
- 2 February 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (2) , 88
On the Estimation of the Surface Elevation of Regular and Irregular Waves Using the Velocity Field of Bubbles
This paper describes a new set of experiments focused on estimating time series of the free surface elevation of water (FSEW) from velocities recorded by submerged air bubbles under regular and irregular waves using a low-cost non-intrusive technique. The main purpose is to compute wave heights and periods using time series of velocities recorded at any depth. The velocities were taken from the tracking of a bubble curtain with only one high-speed digital video camera and a bubble generator. These experiments eliminate the need of intrusive instruments while the methodology can also be applied if the free surface is not visible or even if only part of the depth can be recorded. The estimation of the FSEW was successful for regular waves and reasonably accurate for irregular waves. Moreover, the algorithm to reconstruct the FSEW showed better results for larger wave amplitudes.
- 2 February 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (2) , 88
Open AccessOn the Estimation of the Surface Elevation of Regular and Irregular Waves Using the Velocity Field of Bubbles
This paper describes a new set of experiments focused on estimating time series of the free surface elevation of water (FSEW) from velocities recorded by submerged air bubbles under regular and irregular waves using a low-cost non-intrusive technique. The main purpose is to compute wave heights and periods using time series of velocities recorded at any depth. The velocities were taken from the tracking of a bubble curtain with only one high-speed digital video camera and a bubble generator. These experiments eliminate the need of intrusive instruments while the methodology can also be applied if the free surface is not visible or even if only part of the depth can be recorded. The estimation of the FSEW was successful for regular waves and reasonably accurate for irregular waves. Moreover, the algorithm to reconstruct the FSEW showed better results for larger wave amplitudes.
- Open Access
- 2 January 2019
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 58 (1) , 34-46
Individual violent wave-overtopping events: behaviour and estimation
To better understand individual violent wave overtopping, of significance for coastal defence design, three breaking wave types (steep-fronted, plunging and broken) based on focused wave groups, were generated in laboratory and numerical models. High-speed video captured overtopping events and produced velocity vector maps by means of bubble image velocimetry (BIV). Results were compared with a numerical model based on a linear wave detection procedure and a two-phase incompressible Navier–Stokes-based solver. This novel approach revealed that the overtopping waves comprised an initial jet of 0.2 s duration, but dominated by quasi-steady flow. Whilst laboratory surface-elevation time-histories were highly repeatable, overtopping volume repeats were sensitive to the breaker type. Measured volumes were compared with: the numerical model (which over-predicted, but was reasonably accurate for steep-fronted waves); estimations based on BIV results (which provided very close agreement for the steep-fronted waves); and a weir-based analogy (which provided reasonable agreement, but always under-predicted).
- 2 January 2019
- Published by Taylor & Francis in Journal of Hydraulic Research
- Vol. 58 (1) , 34-46
Open AccessIndividual violent wave-overtopping events: behaviour and estimation
To better understand individual violent wave overtopping, of significance for coastal defence design, three breaking wave types (steep-fronted, plunging and broken) based on focused wave groups, were generated in laboratory and numerical models. High-speed video captured overtopping events and produced velocity vector maps by means of bubble image velocimetry (BIV). Results were compared with a numerical model based on a linear wave detection procedure and a two-phase incompressible Navier–Stokes-based solver. This novel approach revealed that the overtopping waves comprised an initial jet of 0.2 s duration, but dominated by quasi-steady flow. Whilst laboratory surface-elevation time-histories were highly repeatable, overtopping volume repeats were sensitive to the breaker type. Measured volumes were compared with: the numerical model (which over-predicted, but was reasonably accurate for steep-fronted waves); estimations based on BIV results (which provided very close agreement for the steep-fronted waves); and a weir-based analogy (which provided reasonable agreement, but always under-predicted).
- Open Access
- 23 June 2017
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (35) , 24
A PREDICTIVE MODEL FOR SCOUR DEPTH OF COASTAL BUILDING FAILURES DUE TO TSUNAMIS
The 2011 Great East Japan Earthquake and Tsunami was one of the strongest earthquakes which generated a major tsunami in modern history. The tsunami disaster had an estimated cost of 16.9 trillion yen (US$ 217.3 billion) and affected the Coastal buildings, services, infrastructure and industrial sectors. Approximately 61% of damaged cost was from the building sector. A practical predictive scour depth model at seaward face was developed to highlight the scour failure of Coastal buildings in Miyagi, Fukushima and Iwate prefectures affected by the 2011 Great East Japan Earthquake and Tsunami. The predictive model for representative scour depth was developed in terms of various hydraulic, geometrical and soil properties affecting Coastal buildings. An analysis was undertaken to investigate the effectiveness of the authors’ predictive scour model against the existing models. The results of the authors’ proposed model suggested that the tsunami velocity played a significant role on tsunami-induced scour, other scour models such as Tonkin et al.’s model (2003) is reliant on the accuracy of sub models and hydrodynamic forces while the Colorado State University model as modified by Nadal et al. (2010) is reliant on the geometric parameter of the structure.
- 23 June 2017
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (35) , 24
Open AccessA PREDICTIVE MODEL FOR SCOUR DEPTH OF COASTAL BUILDING FAILURES DUE TO TSUNAMIS
The 2011 Great East Japan Earthquake and Tsunami was one of the strongest earthquakes which generated a major tsunami in modern history. The tsunami disaster had an estimated cost of 16.9 trillion yen (US$ 217.3 billion) and affected the Coastal buildings, services, infrastructure and industrial sectors. Approximately 61% of damaged cost was from the building sector. A practical predictive scour depth model at seaward face was developed to highlight the scour failure of Coastal buildings in Miyagi, Fukushima and Iwate prefectures affected by the 2011 Great East Japan Earthquake and Tsunami. The predictive model for representative scour depth was developed in terms of various hydraulic, geometrical and soil properties affecting Coastal buildings. An analysis was undertaken to investigate the effectiveness of the authors’ predictive scour model against the existing models. The results of the authors’ proposed model suggested that the tsunami velocity played a significant role on tsunami-induced scour, other scour models such as Tonkin et al.’s model (2003) is reliant on the accuracy of sub models and hydrodynamic forces while the Colorado State University model as modified by Nadal et al. (2010) is reliant on the geometric parameter of the structure.
- 1 December 2016
- Published by Taylor & Francis in Coastal Engineering Journal
- Vol. 58 (4) , 1640017-1
Failure Mechanisms and Local Scour at Coastal Structures Induced by Tsunami
- 1 December 2016
- Published by Taylor & Francis in Coastal Engineering Journal
- Vol. 58 (4) , 1640017-1
Failure Mechanisms and Local Scour at Coastal Structures Induced by Tsunami
- Open Access
- 26 October 2014
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (34) , 37
ANALYSIS OF TSUNAMI BEHAVIOR AND THE EFFECT OF COASTAL FOREST IN REDUCING TSUNAMI FORCE AROUND THE COASTAL DIKES
ANALYSIS OF TSUNAMI BEHAVIOR AND THE EFFECT OF COASTAL FOREST IN REDUCING TSUNAMI FORCE AROUND THE COASTAL DIKES
- 26 October 2014
- Published by Coastal Engineering Research Council in Coastal Engineering Proceedings
- Vol. 1 (34) , 37
Open AccessANALYSIS OF TSUNAMI BEHAVIOR AND THE EFFECT OF COASTAL FOREST IN REDUCING TSUNAMI FORCE AROUND THE COASTAL DIKES
ANALYSIS OF TSUNAMI BEHAVIOR AND THE EFFECT OF COASTAL FOREST IN REDUCING TSUNAMI FORCE AROUND THE COASTAL DIKES
- Open Access
- 28 July 2013
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 3 (3) , 541-548
Hydrodynamic perspectives of soil scour in fluvial environment
The major concern for many hydraulic structures is the effect of scour at the toe, when the racing floodwater scours away the bed just downstream of the piers. Therefore, understanding the soil-hydrodynamic interaction needs to be investigated. In this study, a series of 2D laboratory tests have been carried out to study the likelihood of soil scour due to the soil-hydrodynamic interaction and influence of sediment properties. Characteristics such as sediment deposition patterns, longitudinal/lateral spreading length/area, and bed scour profiles for three sediment diameters (i.e. 0.26, 0.30 and 2.40 mm) under dry and wet soil conditions are studied intensively. Experimental results revealed that soil of identical diameters under wet and dry conditions caused significant changes in soil scour rate and deposition patterns. Transport rates in dry condition were much slower than wet condition. It was observed that, for the same flow condition, different soils gave different long term equilibrium deposition patterns due to the grain size distribution and particle shape. Eddies were generated behind the soil samples which resulted in forming a series of ‘crescent’ zones. Findings of this study could offer a qualitative outline of the effects of various parameters to demonstrate a better representation of estimating scour rate in fluvial condition.
- 28 July 2013
- Published by Walter de Gruyter GmbH in Open Engineering
- Vol. 3 (3) , 541-548
Open AccessHydrodynamic perspectives of soil scour in fluvial environment
The major concern for many hydraulic structures is the effect of scour at the toe, when the racing floodwater scours away the bed just downstream of the piers. Therefore, understanding the soil-hydrodynamic interaction needs to be investigated. In this study, a series of 2D laboratory tests have been carried out to study the likelihood of soil scour due to the soil-hydrodynamic interaction and influence of sediment properties. Characteristics such as sediment deposition patterns, longitudinal/lateral spreading length/area, and bed scour profiles for three sediment diameters (i.e. 0.26, 0.30 and 2.40 mm) under dry and wet soil conditions are studied intensively. Experimental results revealed that soil of identical diameters under wet and dry conditions caused significant changes in soil scour rate and deposition patterns. Transport rates in dry condition were much slower than wet condition. It was observed that, for the same flow condition, different soils gave different long term equilibrium deposition patterns due to the grain size distribution and particle shape. Eddies were generated behind the soil samples which resulted in forming a series of ‘crescent’ zones. Findings of this study could offer a qualitative outline of the effects of various parameters to demonstrate a better representation of estimating scour rate in fluvial condition.
- Open Access
- 1 December 2012
- Published by SAGE Publications in The International Journal of Ocean and Climate Systems
- Vol. 3 (4) , 229-239
Shallow Water Hydrodynamic Investigation of Local Scour over Smooth and Rough Sediment Beds
Over the recent years, a number of studies in nearshore sediment transport have been researched but a greater understanding of soil-hydrodynamic interaction has still paramount importance. A series of 2D small-scale physical experiments were performed at the University of East London (UEL) hydraulics laboratory to investigate the influence of flow and sediment properties on soil scour. Measured sediment and flow data were used to develop a simple empirical relationship for scour rate of each crescent zone with the help of dimensional analysis and best-fit technique under smooth bed condition. The proposed paper discusses the extended investigation on soil-hydrodynamic behaviour by increasing the mobile bed roughness to greater values used in earlier experiments by the authors to better understand sediment particle sorting mechanism and their spreading characteristics during scour. Eventually, the proposed experimental work will lead to the comparison, calibration and development of predictive curves of scour rate for different soils of each developing crescent zones.
- 1 December 2012
- Published by SAGE Publications in The International Journal of Ocean and Climate Systems
- Vol. 3 (4) , 229-239
Open AccessShallow Water Hydrodynamic Investigation of Local Scour over Smooth and Rough Sediment Beds
Over the recent years, a number of studies in nearshore sediment transport have been researched but a greater understanding of soil-hydrodynamic interaction has still paramount importance. A series of 2D small-scale physical experiments were performed at the University of East London (UEL) hydraulics laboratory to investigate the influence of flow and sediment properties on soil scour. Measured sediment and flow data were used to develop a simple empirical relationship for scour rate of each crescent zone with the help of dimensional analysis and best-fit technique under smooth bed condition. The proposed paper discusses the extended investigation on soil-hydrodynamic behaviour by increasing the mobile bed roughness to greater values used in earlier experiments by the authors to better understand sediment particle sorting mechanism and their spreading characteristics during scour. Eventually, the proposed experimental work will lead to the comparison, calibration and development of predictive curves of scour rate for different soils of each developing crescent zones.