Hyo Sik Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Hyo Sik Chang has a total of 271 co-authors. Here are the top co-authors by number of shared publications:
Young Joon Cho
12 shared publicationsHyunsang Hwang
9 shared publicationsDae Won Moon
Nano Surface Group , Korea Research Institute of Standards and Science (KRISS), Daejeon 305-600, Korea
8 shared publications- Jongchul Lim
Graduate School of Energy Science & Technology Chungnam National University Daejeon Republic of Korea
8 shared publications D. W. Moon
Korea Research Institute of Standards and Science Advanced Industrial Technology Group Daejeon 305-600, Korea
7 shared publications- Gi-Hwan Kang
Photovoltaics Laboratory, New and Renewable Energy Institute, Korea Institute of Energy Research, Daejeon 34129, Korea
6 shared publications
Latest Publications
Chemical Functionality Engineering of Anti‐Solvent Additives for Photostable Perovskite Solar Cells
Metal‐halide perovskite solar cells (PSCs) achieve high power‐conversion efficiencies but remain susceptible to photo‐induced degradation caused by mobile ions and phase segregation. Here, we investigate positional isomers of pyridine‐carboxylic acid, namely pyridine‐2‐carboxylic acid (2‐PC) and pyridine‐4‐carboxylic acid (4‐PC), as anti‐solvent additives to clarify how functional‐group orientation governs defect passivation and photo‐induced degradation. Both additives improve film morphology and reduce trap density; however, 4‐PC, in which the carboxyl group is positioned opposite the pyridine nitrogen, provides markedly stronger passivation by virtue of its more favorable passivation geometry. As a result, 4‐PC suppresses light‐induced photoluminescence red shift, reduces trap density by approximately 27%, and enables unencapsulated devices to retain over 88% of their initial efficiency after 1000 h. Spectroscopic and transient analyses further indicate that 4‐PC simultaneously passivates Pb‐related defects and halide vacancies, thereby suppressing ion migration and halide phase segregation under operating conditions. These findings establish positional‐isomer engineering as a practical molecular design principle for developing simple yet effective anti‐solvent additives toward improved photo‐induced phase stability in perovskite photovoltaics.
Chemical Functionality Engineering of Anti‐Solvent Additives for Photostable Perovskite Solar Cells
Metal‐halide perovskite solar cells (PSCs) achieve high power‐conversion efficiencies but remain susceptible to photo‐induced degradation caused by mobile ions and phase segregation. Here, we investigate positional isomers of pyridine‐carboxylic acid, namely pyridine‐2‐carboxylic acid (2‐PC) and pyridine‐4‐carboxylic acid (4‐PC), as anti‐solvent additives to clarify how functional‐group orientation governs defect passivation and photo‐induced degradation. Both additives improve film morphology and reduce trap density; however, 4‐PC, in which the carboxyl group is positioned opposite the pyridine nitrogen, provides markedly stronger passivation by virtue of its more favorable passivation geometry. As a result, 4‐PC suppresses light‐induced photoluminescence red shift, reduces trap density by approximately 27%, and enables unencapsulated devices to retain over 88% of their initial efficiency after 1000 h. Spectroscopic and transient analyses further indicate that 4‐PC simultaneously passivates Pb‐related defects and halide vacancies, thereby suppressing ion migration and halide phase segregation under operating conditions. These findings establish positional‐isomer engineering as a practical molecular design principle for developing simple yet effective anti‐solvent additives toward improved photo‐induced phase stability in perovskite photovoltaics.
- Open Access
- 25 July 2026
- Published by Wiley in Small Methods
- Vol. 10 (16)
Controlled Grain Growth Deposition for Enhanced Bulk and Interfacial Defect Passivation in Vacuum‐Deposited FAPbI 3 Perovskite Solar Cells
Vacuum deposition of perovskite thin films offers superior conformality and precise control over solution‐based methods. However, non‐uniform nucleation and island‐like growth produce columnar grains, voids, and trap states at the electron‐transport layer (ETL)/perovskite interface, causing non‐radiative recombination. In conventional co‐deposition, volatile formamidinium iodide (FAI) reaches the SnO 2 surface first, undergoes island‐like growth in the early stages of deposition, creating pinholes and voids that act as interfacial trap sites. We present a controlled grain growth deposition (CGGD) method using FAPbI 3 components. An ultrathin 3.5 nm PbI 2 layer is pre‐deposited on atomic layer deposited SnO 2. This sacrificial nucleation template is fully converted during subsequent FAI/PbI 2 co‐evaporation, enabling uniform nucleation and laterally coherent grain growth without excess residual PbI 2 . CGGD suppresses island‐like FAI growth and promotes uniform interfacial nucleation, yielding 18.6% larger grains while reducing both bulk and interfacial trap densities. The resulting FAPbI 3 films exhibit a 34% reduction in trap‐state density and nearly twofold longer carrier lifetimes, evidencing superior structural quality and suppressed non‐radiative recombination. Implementing CGGD in perovskite solar cells delivers a stabilized power conversion efficiency (PCE) of 19.9%. This nucleation‐controlled deposition route provides a general pathway to high‐quality vacuum‐deposited films by improving bulk crystallization and ETL/perovskite interfacial defect passivation, facilitating scalable optoelectronic devices.
- 25 July 2026
- Published by Wiley in Small Methods
- Vol. 10 (16)
Open AccessControlled Grain Growth Deposition for Enhanced Bulk and Interfacial Defect Passivation in Vacuum‐Deposited FAPbI 3 Perovskite Solar Cells
Vacuum deposition of perovskite thin films offers superior conformality and precise control over solution‐based methods. However, non‐uniform nucleation and island‐like growth produce columnar grains, voids, and trap states at the electron‐transport layer (ETL)/perovskite interface, causing non‐radiative recombination. In conventional co‐deposition, volatile formamidinium iodide (FAI) reaches the SnO 2 surface first, undergoes island‐like growth in the early stages of deposition, creating pinholes and voids that act as interfacial trap sites. We present a controlled grain growth deposition (CGGD) method using FAPbI 3 components. An ultrathin 3.5 nm PbI 2 layer is pre‐deposited on atomic layer deposited SnO 2. This sacrificial nucleation template is fully converted during subsequent FAI/PbI 2 co‐evaporation, enabling uniform nucleation and laterally coherent grain growth without excess residual PbI 2 . CGGD suppresses island‐like FAI growth and promotes uniform interfacial nucleation, yielding 18.6% larger grains while reducing both bulk and interfacial trap densities. The resulting FAPbI 3 films exhibit a 34% reduction in trap‐state density and nearly twofold longer carrier lifetimes, evidencing superior structural quality and suppressed non‐radiative recombination. Implementing CGGD in perovskite solar cells delivers a stabilized power conversion efficiency (PCE) of 19.9%. This nucleation‐controlled deposition route provides a general pathway to high‐quality vacuum‐deposited films by improving bulk crystallization and ETL/perovskite interfacial defect passivation, facilitating scalable optoelectronic devices.
- Open Access
- 28 February 2026
- Published by The Korean Solar Energy Society in Journal of the Korean Solar Energy Society
- Vol. 46 (1) , 1-13
Understanding Electric Properties Thickness of SnO2 with Atomic Layer Deposition
- 28 February 2026
- Published by The Korean Solar Energy Society in Journal of the Korean Solar Energy Society
- Vol. 46 (1) , 1-13
Open AccessUnderstanding Electric Properties Thickness of SnO2 with Atomic Layer Deposition
- Open Access
- 3 November 2025
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (1) , 304-314
Dual-functional additives for stable perovskite thin films
In this work, we introduced thionate-based additives. The incorporation of additives not only enhances performance but also retard degradation under humid, thermal, and light stress.
- 3 November 2025
- Published by Royal Society of Chemistry (RSC) in RSC Sustainability
- Vol. 4 (1) , 304-314
Open AccessDual-functional additives for stable perovskite thin films
In this work, we introduced thionate-based additives. The incorporation of additives not only enhances performance but also retard degradation under humid, thermal, and light stress.
- Open Access
- 30 October 2025
- Published by The Korean Solar Energy Society in Journal of the Korean Solar Energy Society
- Vol. 45 (5) , 75-89
Rapid Synthesis of Si3N4 via a Two-Step Direct Nitridation Reaction Using Silicon Recycled from End-of-Life Photovoltaic (EoL PV) Modules
In this study, recycled Si (r-Si) recovered from end-of-life photovoltaic (EoL PV) modules was used to synthesize Si 3 N 4. The recovered r-Si powder was treated via ball milling to obtain an average particle size of approximately 1 µm, after which it was subjected to two-step direct nitridation under a N 2-H 2 atmosphere. Specifically, first-step nitridation (conducted at 1350℃), which promoted surface nitridation, was followed by second-step nitridation (performed at 1450℃), which enabled complete conversion within 10 min. The resulting Si 3 N 4 predominantly comprised the α-phase (87-91%), and the minor β-phase fraction (9-13%) was attributed to local heat-concentration-induced melting. Additionally, volatile SiO species, generated via the reduction of SiO 2 or partial oxidation of Si, reacted with N 2 in the gas phase, further contributing to β-Si 3 N 4 formation. Analysis of particle sizes, along with scanning electron microscopy, confirmed grain coarsening at a prolonged holding time. The sample maintained at 1350℃ for 60 min, followed by 10 min at 1450℃ (#60-10), exhibited a smaller particle size with a short processing time, thus representing the optimal synthetic condition. In addition, the mechanism 한국태양에너지학회 논문집
- 30 October 2025
- Published by The Korean Solar Energy Society in Journal of the Korean Solar Energy Society
- Vol. 45 (5) , 75-89
Open AccessRapid Synthesis of Si3N4 via a Two-Step Direct Nitridation Reaction Using Silicon Recycled from End-of-Life Photovoltaic (EoL PV) Modules
In this study, recycled Si (r-Si) recovered from end-of-life photovoltaic (EoL PV) modules was used to synthesize Si 3 N 4. The recovered r-Si powder was treated via ball milling to obtain an average particle size of approximately 1 µm, after which it was subjected to two-step direct nitridation under a N 2-H 2 atmosphere. Specifically, first-step nitridation (conducted at 1350℃), which promoted surface nitridation, was followed by second-step nitridation (performed at 1450℃), which enabled complete conversion within 10 min. The resulting Si 3 N 4 predominantly comprised the α-phase (87-91%), and the minor β-phase fraction (9-13%) was attributed to local heat-concentration-induced melting. Additionally, volatile SiO species, generated via the reduction of SiO 2 or partial oxidation of Si, reacted with N 2 in the gas phase, further contributing to β-Si 3 N 4 formation. Analysis of particle sizes, along with scanning electron microscopy, confirmed grain coarsening at a prolonged holding time. The sample maintained at 1350℃ for 60 min, followed by 10 min at 1450℃ (#60-10), exhibited a smaller particle size with a short processing time, thus representing the optimal synthetic condition. In addition, the mechanism 한국태양에너지학회 논문집
- Open Access
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (38) , 32920
Correction: Reforming material chemistry of CIGS solar cells via a precise Ag doping strategy
Correction for “Reforming material chemistry of CIGS solar cells via a precise Ag doping strategy” by Jiseon Hwang et al., J. Mater. Chem. A, 2023, 11, 19546–19555, https://doi.org/10.1039/D3TA03131D.
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (38) , 32920
Open AccessCorrection: Reforming material chemistry of CIGS solar cells via a precise Ag doping strategy
Correction for “Reforming material chemistry of CIGS solar cells via a precise Ag doping strategy” by Jiseon Hwang et al., J. Mater. Chem. A, 2023, 11, 19546–19555, https://doi.org/10.1039/D3TA03131D.
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (41) , 35411-35425
Strain uniformity and defect passivation via 2D organic halide salts to improve the air stability of perovskite solar cells
Minimizing lattice strain and interfacial non-radiative recombination losses is crucial for enhancing the photovoltaic performance and long-term stability of perovskite solar cells (PSCs). However, this requires a deeper understanding of the mechanisms by which interfaces and grain boundaries can be modified. Herein, we applied and compared various ammonium halide salts (I−, Br−, and Cl−) to the surface of the 3D CsMAFA perovskite to induce 2D capping layer formation, which promotes surface and grain boundary recrystallization, modifies the bulk and surface structure, and passivates interfacial defects. We theoretically and experimentally reveal how ammonium halides diffuse and modulate the perovskite crystal lattice (defect suppression at both surfaces and grain boundaries), and their interaction strength with undercoordinated lead (Pb2+) ions. Diffusion analysis showed that chloride salts penetrated more effectively into the perovskite bulk than iodide and bromide salts. Consequently, the strong electronic properties of chloride species facilitate robust hydrogen bonding with FA/MA and effectively passivate the point defects. This process improved surface morphology, crystallinity, and crystal orientation while suppressing PbI2 formation and reducing trap density, thereby enhancing charge carrier dynamics. Remarkably, chloride species facilitate the alleviation of lattice micro-strain and suppression of lattice distortion, yielding a power conversion efficiency (PCE) of 23% and excellent operational stability, with the device retaining 91% of its initial efficiency. In contrast, the control device exhibits a PCE degradation of 71% at 15–25% relative humidity. These findings provide critical insights into halide-dependent surface engineering strategies for defect passivation, lattice strain relaxation, and enhanced environmental stability, offering a promising pathway toward highly efficient and durable PSCs.
- 22 September 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (41) , 35411-35425
Strain uniformity and defect passivation via 2D organic halide salts to improve the air stability of perovskite solar cells
Minimizing lattice strain and interfacial non-radiative recombination losses is crucial for enhancing the photovoltaic performance and long-term stability of perovskite solar cells (PSCs). However, this requires a deeper understanding of the mechanisms by which interfaces and grain boundaries can be modified. Herein, we applied and compared various ammonium halide salts (I−, Br−, and Cl−) to the surface of the 3D CsMAFA perovskite to induce 2D capping layer formation, which promotes surface and grain boundary recrystallization, modifies the bulk and surface structure, and passivates interfacial defects. We theoretically and experimentally reveal how ammonium halides diffuse and modulate the perovskite crystal lattice (defect suppression at both surfaces and grain boundaries), and their interaction strength with undercoordinated lead (Pb2+) ions. Diffusion analysis showed that chloride salts penetrated more effectively into the perovskite bulk than iodide and bromide salts. Consequently, the strong electronic properties of chloride species facilitate robust hydrogen bonding with FA/MA and effectively passivate the point defects. This process improved surface morphology, crystallinity, and crystal orientation while suppressing PbI2 formation and reducing trap density, thereby enhancing charge carrier dynamics. Remarkably, chloride species facilitate the alleviation of lattice micro-strain and suppression of lattice distortion, yielding a power conversion efficiency (PCE) of 23% and excellent operational stability, with the device retaining 91% of its initial efficiency. In contrast, the control device exhibits a PCE degradation of 71% at 15–25% relative humidity. These findings provide critical insights into halide-dependent surface engineering strategies for defect passivation, lattice strain relaxation, and enhanced environmental stability, offering a promising pathway toward highly efficient and durable PSCs.
- Open Access
Elucidating Interfacial Hole Extraction and Recombination Kinetics in Perovskite Thin Films
Hybrid organic–inorganic perovskite solar cells (PSCs) are receiving huge attention owing to their marvelous advantages, such as low cost, high efficiency, and superior optoelectronics characteristics. Despite their promising potential, charge-carrier dynamics at the interfaces are still ambiguous, causing carrier recombination and hindering carrier transport, thus lowering the open-circuit voltages (Voc) of PSCs. To unveil this ambiguous phenomenon, we intensively performed various optoelectronic measurements to investigate the impact of interfacial charge-carrier dynamics of PSCs under various light intensities. This is because the charge density can exhibit different mobility and charge transport properties depending on the characteristics of the charge transport layers. We explored the influence of the hole transport layer (HTL) by investigating charge transport properties using photoluminescence (PL) and time-resolved (TRPL) to unveil interfacial recombination phenomena and optoelectronic characteristics. We specifically investigated the impact of various thicknesses of HTLs, such as 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD), and poly(triaryl)amine (PTAA), on FA0.83MA0.17Pb(Br0.05I0.95)3 perovskite films. The HTLs are coated on perovskite film by altering the HTL’s concentration and using F4-TCNQ and 4-tert-butylpyridine (tBP) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSi) as dopants both for spiro-OMeTAD and PTAA. These HTLs diversified the charge concentration gradients in the absorption layer, thus leading to different recombination rates based on the employed laser intensities. At the same time, the generated charge carriers are rapidly transferred to the interface of the HTL/absorption layer and accumulate holes at the interface because of inefficient capacitance and mobility differences caused by differently doped HTL thicknesses. Notably, the charge concentration gradient is low at lower light intensities and did not accumulate holes at the HTL/absorption layer interface, even though they have high charge mobility. Therefore, this study highlights the importance of interfacial charge recombination and charge transport phenomena to achieve highly efficient and stable PSCs.
Open AccessElucidating Interfacial Hole Extraction and Recombination Kinetics in Perovskite Thin Films
Hybrid organic–inorganic perovskite solar cells (PSCs) are receiving huge attention owing to their marvelous advantages, such as low cost, high efficiency, and superior optoelectronics characteristics. Despite their promising potential, charge-carrier dynamics at the interfaces are still ambiguous, causing carrier recombination and hindering carrier transport, thus lowering the open-circuit voltages (Voc) of PSCs. To unveil this ambiguous phenomenon, we intensively performed various optoelectronic measurements to investigate the impact of interfacial charge-carrier dynamics of PSCs under various light intensities. This is because the charge density can exhibit different mobility and charge transport properties depending on the characteristics of the charge transport layers. We explored the influence of the hole transport layer (HTL) by investigating charge transport properties using photoluminescence (PL) and time-resolved (TRPL) to unveil interfacial recombination phenomena and optoelectronic characteristics. We specifically investigated the impact of various thicknesses of HTLs, such as 2,2′,7,7′-tetrakis[N,N-di(4-methoxyphenyl)amino]-9,9′-spirobifluorene (spiro-OMeTAD), and poly(triaryl)amine (PTAA), on FA0.83MA0.17Pb(Br0.05I0.95)3 perovskite films. The HTLs are coated on perovskite film by altering the HTL’s concentration and using F4-TCNQ and 4-tert-butylpyridine (tBP) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSi) as dopants both for spiro-OMeTAD and PTAA. These HTLs diversified the charge concentration gradients in the absorption layer, thus leading to different recombination rates based on the employed laser intensities. At the same time, the generated charge carriers are rapidly transferred to the interface of the HTL/absorption layer and accumulate holes at the interface because of inefficient capacitance and mobility differences caused by differently doped HTL thicknesses. Notably, the charge concentration gradient is low at lower light intensities and did not accumulate holes at the HTL/absorption layer interface, even though they have high charge mobility. Therefore, this study highlights the importance of interfacial charge recombination and charge transport phenomena to achieve highly efficient and stable PSCs.
- Open Access
- 27 November 2023
- Published by The Materials Research Society of Korea in Korean Journal of Materials Research
- Vol. 33 (11) , 475-481
Characteristics of Tin Oxide Thin Film Grown by Atomic Layer Deposition and Spin Coating Process as Electron Transport Layer for Perovskite Solar Cells
1. 서 론 유무기 할라이드 계열의 페로브스카이트는 할로겐 음 이온의 종류와 성분에 따라 제어 가능한 밴드 갭, 높은 광 흡수 계수, 낮은 엑시톤(exciton) 결합에너지으로 인한 전 자와 정공을 용이하게 분리, 긴 전하 확산 거리를 통한 전 자와 정공이 재결합 방지와 같은 광전자 특성으로 차세대 태양전지의 소재로서 큰 관심을 받아왔다. 1-3) 페로브스카 이트 태양전지(perovskite solar cell, PSCs)의 구조는 투명 전도성 산화물(transparent conductive oxide, TCO) 전극과 n형 반도체 특성을 가지는 전자 수송 층(electron transport layer, ETL), 페로브스카이트 활성층(perovsktie active layer), p형 반도체 특성을 가지는 정공 수송층(hole transport layer)으로 구성된다. 4) 일반적으로 빛이 들어오는 방향의 순서대로 구조 명을 기입한다. 전자 수송층으로 빛이 먼저 들어오면 n-i-p 구조, 정공 수송층으로 빛이 들어오면
- 27 November 2023
- Published by The Materials Research Society of Korea in Korean Journal of Materials Research
- Vol. 33 (11) , 475-481
Open AccessCharacteristics of Tin Oxide Thin Film Grown by Atomic Layer Deposition and Spin Coating Process as Electron Transport Layer for Perovskite Solar Cells
1. 서 론 유무기 할라이드 계열의 페로브스카이트는 할로겐 음 이온의 종류와 성분에 따라 제어 가능한 밴드 갭, 높은 광 흡수 계수, 낮은 엑시톤(exciton) 결합에너지으로 인한 전 자와 정공을 용이하게 분리, 긴 전하 확산 거리를 통한 전 자와 정공이 재결합 방지와 같은 광전자 특성으로 차세대 태양전지의 소재로서 큰 관심을 받아왔다. 1-3) 페로브스카 이트 태양전지(perovskite solar cell, PSCs)의 구조는 투명 전도성 산화물(transparent conductive oxide, TCO) 전극과 n형 반도체 특성을 가지는 전자 수송 층(electron transport layer, ETL), 페로브스카이트 활성층(perovsktie active layer), p형 반도체 특성을 가지는 정공 수송층(hole transport layer)으로 구성된다. 4) 일반적으로 빛이 들어오는 방향의 순서대로 구조 명을 기입한다. 전자 수송층으로 빛이 먼저 들어오면 n-i-p 구조, 정공 수송층으로 빛이 들어오면