DMDennis Morian

Dennis Morian

*This is an algorithmically generated author record based on publicly available information.

Dennis Morian has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Construction of The Precast Prestressed Pavement Installation on I-10 in El Monte, California

    by Dennis A. Morian, Jon Grafton

    The section of prestressed/post tensioned pavement was constructed in the spring of 2004, in conjunction with reconstruction of a section of I-10 in the Los Angeles, CA area. While this technology has been used in the past, significant progress is being made in terms of practical application. The paper includes a discussion of concepts pertinent to this type of pavement as well as fabrication and construction details for delivery of the pavement. This project utilized a specific geometric design so that the shoulder is included in the prestressed panels. Details of the fabrication process of the panels and field assembly are discussed. The paper describes details of panel fabrication and handling. It also addresses placement of the panels and the post tensioning operations. The details include those for jointing and post tensioning of slabs. Advantages of this type of pavement construction include reduced field construction time and long anticipate service life. The nature of this pavement design makes it an excellent form of long-life pavement. The significance of this research is the demonstration of successful application of precast post tension technology for pavement repair and construction.

  • Data Quality Monitoring for 3D Automated Data Collection Equipment

    by Dennis Morian, Douglas Frith

    As part of the Transportation Pooled Fund study, TPF-5(299), Quality Engineering Solutions, Inc. was awarded a contract to develop guidelines tha |

  • Use of Fluidized Bed Combustion Ash in Full Depth Reclamation

    by Shervin Jahangirnejad, Dennis Morian, Barry Scheetz, Mansour Solaimanian

    The pozzolanic nature of fly ash makes it an excellent material for partial replacement of hydraulic cement in many road construction applications. This paper presents such an application for a specific type of cementitious fly ash from a power generating plant using fluidized bed combustion (FBC) called FBC ash. The Portland cement-FBC ash combination was used in full depth reclamation (FDR) of a low volume road in Pennsylvania. The initial mixture design for FDR was conducted for 100% cement as the chemical stabilizer, optimizing the water and cement contents through an engineered design process. Subsequent to the development of the initial mixture design, 50% of the cement was replaced by FBC ash and density and unconfined compressive strength tests were conducted on the cement-FBC ash blend to determine the impact of this replacement on strength and density. Construction of this cement-FBC ash FDR and the all-cement FDR were conducted successfully. Results from unconfined compressive tests on field cores obtained after construction indicated that specimens obtained from cement-FBC ash sections had slightly higher strength than the all-cement specimens.


  • Cost-Benefit Analysis of Thin Surface Treatments in Pavement Treatment Strategies and Cycle Maintenance

    by Guangming Wang, Dennis Morian, Doug Frith

    In this paper, a cost-benefit analysis is reported for selecting the most economical alternative among various pavement preservation choices using life-cycle cost analysis analytical technology. The impact of pavement conditions on the performance of the specific treatment was investigated in terms of pavement performance curves, which were developed for the treatments under varying pavement condition levels at each traffic network based on Pennsylvania Department of Transportation overall pavement index (OPI) data. A relationship between pavement life extension and pavement condition prior to the treatment was established. Finally, life-cycle cost analysis was conducted to quantify the impact of the pavement condition on the performance of the preservative treatments in terms of the benefit-to-cost ratio and net equivalent uniform annual cost. There is an optimum pavement condition and associated age (or a range of conditions or ages) in which the benefit-to-cost ratio that is associated with a t...


  • The Influence of Crack Initiation on Deflection Responses under Moving Loads on PCC Overlays at the FAA NAPTF

    by Lin Yeh, Shelley M. Stoffels, Guangming Wang, Dennis Morian

    A series of full-scale accelerated tests to validate and improve current airfield pavement design and rehabilitation has been conducted at the National Airport Pavement Test Facility (NAPTF), which is operated by the Federal Aviation Administration (FAA). Construction Cycle 4 (CC4) consisted of unbonded concrete overlays and included two phases: the Baseline Experiment and the SCI Validation Study. The experiment included three structural cross-sections subjected to triple dual-tandem and twin dual-tandem loadings. Distress surveys and nondestructive testing were conducted regularly on the test items. Various instruments were installed at designed locations within the test items to capture mechanical behavior of the unbonded concrete overlays and underlying slabs. Linear position transducers (LPT) are one type of installed instrument, which were used to measure the vertical movements of both underlying and overlay pavement slabs due to environmental factors and moving loads.


  • Effects of Surface Rutting on Near-Surface Pavement Responses Based on a Two-Dimensional Axle-Tire-Pavement Interaction Finite-Element Model

    by Guangming Wang, Reynaldo Roque, Dennis Morian

    Road surface profile is an important factor that affects the dynamic responses of the vehicle, which in turn affects pavement responses. In this study, a complete two-dimensional (2D) axle-tire-pavement interaction finite-element model was developed to investigate the effects of a rutted surface on near-surface pavement responses. The results indicate there is a significant difference in tire-pavement contact stress distributions between a rutted surface and a flat surface. The presence of a rutted surface increases both the propensity for top-down cracking and the severity of instability rutting. The observed trend indicates that the greater the existing rut severity is, the more likely it is for top-down cracking and increased rutting to occur.


  • Pavement Rehabilitation Using Fractured Concrete Pavement Techniques

    by Dennis A. Morian, Suri Sadasivam, James W. Mack, Shelley M. Stoffels

    The practice of fracturing rigid pavements in the development of pavement rehabilitation is used quite frequently. However, often the selection of a pavement fracture technique is made randomly, without understanding consequences of the method chosen. In some instances, this results in unsatisfactory performance of the rehabilitation design. This paper discusses three types of rigid pavement breaking used in pavement rehabilitation: rubblization, break and seat, and crack and seat. The characterization of actual fractured pavements utilizing nondestructive testing by falling weight deflectometer, as a part of pavement rehabilitation design is discussed. Determination of the most cost-effective design should consider costs associated with the structural benefit of the various types of pavement fracture. Other conditions, such as type of subgrade, and level of support provided may also have a major impact on the selection of a strategy which will perform properly. Implementing the construction is as critical as the use of appropriate design methods. Practical experience in the construction of these projects is also be discussed. The discussion includes specifications, equipment, and other pertinent factors for successful construction.

  • Unbonded Concrete Overlay Research for Airfields at the FAA National Airport Pavement Test Facility

    by J. W. Mack, S. M. Stoffels, D. A. Morian, A. M. Ioannides, S. S. Wu

    In September 2005, Innovative Pavement Research Foundation (IPRF) contracted with Quality Engineering Solutions Inc. (QES) to conduct research on improving Overlay Design Parameters for Concrete Airfield Pavements at the FAA National Airport Pavement Test Facility (NAPTF) in Atlantic City, NJ. The project scope encompasses the construction and loading of instrumented unbonded concrete overlay test sections at the NAPTF in order to learn more about the design prediction and performance of unbonded concrete overlays for airfield pavements. This research project incorporates design, construction, instrumentation, testing and research into one process. Subsequent research will use the data collected as the basis for analysis of the pavement performance. Construction of the test sections is scheduled to be completed by the spring of 2006 and loading will begin shortly thereafter. As work on the project is ongoing, this paper discusses the anticipated construction and instrumentation of the test sections, as well as the approach for data collection and analysis.

  • Field Instrumentation and Testing Data from Pennsylvania's Superpave In-Situ Stress/Strain Investigation

    by Shelley M. Stoffels, Mansour Solaimanian, Dennis Morian, Ali Soltani

    The Pennsylvania Department of Transportation (PENNDOT) is sponsoring the Superpave In-Situ Stress/Strain Investigation (SISSI), which will complete its fifth year in May, 2006. The purpose of the SISSI project is to provide data essential to the validation and regional calibration of Superpave and the new Mechanistic-Empirical Pavement Design Guide (MEPDG). SISSI is a unique, state-of-the-art instrumentation and analysis project that encompasses eight different Superpave pavement sections across Pennsylvania, including both new pavements and overlays. The uniqueness of the SISSI project is that the selected pavement sections were instrumented as-designed and as-constructed on full-scale public highways, to represent actual practices and materials, without modification for this research, and with minimal interruption to the construction process. The sections are exposed to normal traffic, but evaluated seasonally and yearly using a loaded test vehicle. The project also takes advantage of the latest developments and equipment in the field of instrumentation technology for the full-scale investigation of pavement performance. The project includes detailed monitoring of the construction process, intensive materials characterization, detailed load-response information, traffic and environmental data, and performance measures. This paper briefly reviews the instrumentation and data collection at the eight sites. Examples are provided of the data acquired from the instrumentation, and the interpretation of that data. Data examples are included from the dynamic gauge responses under the controlled truck loading and corresponding WIM (weigh-in-motion) analysis, and from the subsurface environmental gauges.