Ghasem Ghavami Nasr
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ghasem Ghavami Nasr has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
N. E. Connor
9 shared publications- Abubakar Jibrin Abbas
University of Salford
2 shared publications A J Yule
Spray Research Group (SRG), Engineering Research Centre (ERC), School of Computing, Science and Engineering (CSE), University of Salford, Salford, Manchester, UK
1 shared publicationA Whitehead
Hughes Safety Showers (HSS) Ltd, Bredbury, Stockport, UK
1 shared publicationA. J. Yule
Department of Mechanical, Aerospace and Manufacturing Engineering, UMIST, P.O. Box 88, Manchester M60 1QD, UK
1 shared publication- Athari Al-Otaibi
Department of Petroleum and Gas Engineering, School of Science Engineering and Environment, The University of Salford, Manchester, Salford, UK
1 shared publication
Latest Publications
- Open Access
- 23 December 2020
- Published by MDPI AG in Sustainability
- Vol. 13 (1) , 72
Improving the Carbon Capture Efficiency for Gas Power Plants through Amine-Based Absorbents
Environmental concern for our planet has changed significantly over time due to climate change, caused by an increasing population and the subsequent demand for electricity, and thus increased power generation. Considering that natural gas is regarded as a promising fuel for such a purpose, the need to integrate carbon capture technologies in such plants is becoming a necessity, if gas power plants are to be aligned with the reduction of CO2 in the atmosphere, through understanding the capturing efficacy of different absorbents under different operating conditions. Therefore, this study provided for the first time the comparison of available absorbents in relation to amine solvents (MEA, DEA, and DEA) CO2 removal efficiency, cost, and recirculation rate to achieve Climate change action through caron capture without causing absorbent disintegration. The study analyzed Flue under different amine-based solvent solutions (monoethanolamine (MEA), diethanolamine (DEA), and methyldiethanolamine (MDEA)), in order to compare their potential for CO2 reduction under different operating conditions and costs. This was simulated using ProMax 5.0 software modeled as a simple absorber tower to absorb CO2 from flue gas. Furthermore, MEA, DEA, and MDEA adsorbents were used with a temperature of 38 °C and their concentration varied from 10 to 15%. Circulation rates of 200–300 m3/h were used for each concentration and solvent. The findings deduced that MEA is a promising solvent compared to DEA and MDEA in terms of the highest CO2 captured; however, it is limited at the top outlet for clean flue gas, which contained 3.6295% of CO2 and less than half a percent of DEA and MDEA, but this can be addressed either by increasing the concentration to 15% or increasing the MEA circulation rate to 300 m3/h.
- 23 December 2020
- Published by MDPI AG in Sustainability
- Vol. 13 (1) , 72
Open AccessImproving the Carbon Capture Efficiency for Gas Power Plants through Amine-Based Absorbents
Environmental concern for our planet has changed significantly over time due to climate change, caused by an increasing population and the subsequent demand for electricity, and thus increased power generation. Considering that natural gas is regarded as a promising fuel for such a purpose, the need to integrate carbon capture technologies in such plants is becoming a necessity, if gas power plants are to be aligned with the reduction of CO2 in the atmosphere, through understanding the capturing efficacy of different absorbents under different operating conditions. Therefore, this study provided for the first time the comparison of available absorbents in relation to amine solvents (MEA, DEA, and DEA) CO2 removal efficiency, cost, and recirculation rate to achieve Climate change action through caron capture without causing absorbent disintegration. The study analyzed Flue under different amine-based solvent solutions (monoethanolamine (MEA), diethanolamine (DEA), and methyldiethanolamine (MDEA)), in order to compare their potential for CO2 reduction under different operating conditions and costs. This was simulated using ProMax 5.0 software modeled as a simple absorber tower to absorb CO2 from flue gas. Furthermore, MEA, DEA, and MDEA adsorbents were used with a temperature of 38 °C and their concentration varied from 10 to 15%. Circulation rates of 200–300 m3/h were used for each concentration and solvent. The findings deduced that MEA is a promising solvent compared to DEA and MDEA in terms of the highest CO2 captured; however, it is limited at the top outlet for clean flue gas, which contained 3.6295% of CO2 and less than half a percent of DEA and MDEA, but this can be addressed either by increasing the concentration to 15% or increasing the MEA circulation rate to 300 m3/h.
- Open Access
- 3 February 2020
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 10 (5) , 1933-1948
Enhancing the performance of xanthan gum in water-based mud systems using an environmentally friendly biopolymer
Xanthan gum is commonly used in drilling fluids to provide viscosity, solid suspension, and fluid-loss control. However, it is sensitive to high temperatures and not tolerant of field contaminants. This paper presents an experimental study on the effects of an eco-friendly biopolymer (diutan gum) on xanthan gum (XC) in a water-based bentonite mud. Laboratory experiments were carried out for different compositions of the biopolymers in water-based bentonite muds formulated without salt and in water-based bentonite muds containing sodium chloride (NaCl). The rheological properties of the water-based bentonite muds formulated with XC (2 Ibm) and those of the water-based bentonite muds prepared using XC (1Ibm) and diutan gum (1Ibm) were measured using Model 1100 viscometer after aging at 25 °C, 100 °C, and 120 °C for 16 h. The API fluid loss and filter cake of the mud formulations were measured using HTHP filter press. The properties of the water-based bentonite muds containing only XC were compared with those of the water-based bentonite muds containing XC and diutan gum. Presented results show that combining diutan gum and xanthan gum in a ratio of 1:1 in a water-based bentonite mud enhances its performance with respect to fluid properties—apparent viscosity, gel strength, yield points, YP/PV ratio, LSRV,n, andK. The fluid formulations also showed favorable mud cake building characteristics. Experimental data also indicate a 16%, 19%, and 34% reduction in API fluid loss values for the water-based benitoite muds containing XC in the presence of diutan gum after aging at 25 °C, 100 °C, and 120 °C for 16 h, respectively. Experimental results also show that the water-based benitoite mud containing XC and diutan gum would cause less formation damage and was tolerant of contamination with a monovalent cation (Na+). The synergy of xanthan gum and diutan gum can, therefore, improve the performance of water-based drilling fluids.
- 3 February 2020
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 10 (5) , 1933-1948
Open AccessEnhancing the performance of xanthan gum in water-based mud systems using an environmentally friendly biopolymer
Xanthan gum is commonly used in drilling fluids to provide viscosity, solid suspension, and fluid-loss control. However, it is sensitive to high temperatures and not tolerant of field contaminants. This paper presents an experimental study on the effects of an eco-friendly biopolymer (diutan gum) on xanthan gum (XC) in a water-based bentonite mud. Laboratory experiments were carried out for different compositions of the biopolymers in water-based bentonite muds formulated without salt and in water-based bentonite muds containing sodium chloride (NaCl). The rheological properties of the water-based bentonite muds formulated with XC (2 Ibm) and those of the water-based bentonite muds prepared using XC (1Ibm) and diutan gum (1Ibm) were measured using Model 1100 viscometer after aging at 25 °C, 100 °C, and 120 °C for 16 h. The API fluid loss and filter cake of the mud formulations were measured using HTHP filter press. The properties of the water-based bentonite muds containing only XC were compared with those of the water-based bentonite muds containing XC and diutan gum. Presented results show that combining diutan gum and xanthan gum in a ratio of 1:1 in a water-based bentonite mud enhances its performance with respect to fluid properties—apparent viscosity, gel strength, yield points, YP/PV ratio, LSRV,n, andK. The fluid formulations also showed favorable mud cake building characteristics. Experimental data also indicate a 16%, 19%, and 34% reduction in API fluid loss values for the water-based benitoite muds containing XC in the presence of diutan gum after aging at 25 °C, 100 °C, and 120 °C for 16 h, respectively. Experimental results also show that the water-based benitoite mud containing XC and diutan gum would cause less formation damage and was tolerant of contamination with a monovalent cation (Na+). The synergy of xanthan gum and diutan gum can, therefore, improve the performance of water-based drilling fluids.
- Open Access
Influence of Permeability and Injection Orientation Variations on Dispersion Coefficient during Enhanced Gas Recovery by CO2 Injection
This investigation was carried out to highlight the influence of the variation of permeability of the porous media with respect to the injection orientations during enhanced gas recovery (EGR) by CO2 injection using different core samples of different petrophysical properties. The laboratory investigation was performed using core flooding technique at 1300 psig and 50 °C. The injection rates were expressed in terms of the interstitial velocities to give an indication of its magnitude and variation based on the petrophysical properties of each core sample tested. Bandera Grey, Grey Berea, and Buff Berea sandstone core samples were used with measured permeabilities of 16.08, 217.04, and 560.63 md, respectively. The dispersion coefficient was observed to increase with a decrease in permeability, with Bandera Grey having the highest dispersion coefficient and invariably higher mixing between the injected CO2 and the nascent CH4. Furthermore, this dispersion was more pronounced in the horizontal injection orientation compared to the vertical orientation with, again, the lowest permeability having a higher dispersion coefficient in the horizontal orientation by about 50%. This study highlights the importance of the permeability variation in the design of the injection strategy of EGR and provides a revision of the CO2 plume propagation at reservoir conditions during injection.
Open AccessInfluence of Permeability and Injection Orientation Variations on Dispersion Coefficient during Enhanced Gas Recovery by CO2 Injection
This investigation was carried out to highlight the influence of the variation of permeability of the porous media with respect to the injection orientations during enhanced gas recovery (EGR) by CO2 injection using different core samples of different petrophysical properties. The laboratory investigation was performed using core flooding technique at 1300 psig and 50 °C. The injection rates were expressed in terms of the interstitial velocities to give an indication of its magnitude and variation based on the petrophysical properties of each core sample tested. Bandera Grey, Grey Berea, and Buff Berea sandstone core samples were used with measured permeabilities of 16.08, 217.04, and 560.63 md, respectively. The dispersion coefficient was observed to increase with a decrease in permeability, with Bandera Grey having the highest dispersion coefficient and invariably higher mixing between the injected CO2 and the nascent CH4. Furthermore, this dispersion was more pronounced in the horizontal injection orientation compared to the vertical orientation with, again, the lowest permeability having a higher dispersion coefficient in the horizontal orientation by about 50%. This study highlights the importance of the permeability variation in the design of the injection strategy of EGR and provides a revision of the CO2 plume propagation at reservoir conditions during injection.
- 3 August 2014
- Published by Springer Nature
- p. 355-397
Innovation and Research
- 3 August 2014
- Published by Springer Nature
- p. 309-353
Business and Project Management of Natural Gas
- 3 August 2014
- Published by Springer Nature
- p. 45-99
Liquefied Natural Gas
- 3 August 2014
- Published by Springer Nature
- p. 239-280
Industrial Utilisation of Natural Gas
- 3 August 2014
- Published by Springer Nature
- p. 281-308
Fire and Explosion
- 3 August 2014
- Published by Springer Nature
- p. 151-237
Natural Gas Measurement Systems