JSJ. Schlienger

J. Schlienger

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


J. Schlienger has a total of 7 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Vortex-Wake-Blade Interaction in a Shrouded Axial Turbine

    by J. Schlienger, A. I. Kalfas, R. S. Abhari

    This paper presents time-resolved flow field measurements at the exit of the first rotor blade row of a two stage shrouded axial turbine. The observed unsteady interaction mechanism between the secondary flow vortices, the rotor wake and the adjacent blading at the exit plane of the first turbine stage is of prime interest and analyzed in detail. The results indicate that the unsteady secondary flows are primarily dominated by the rotor hub passage vortex and the shed secondary flow field from the upstream stator blade row. The analysis of the results revealed a roll-up mechanism of the rotor wake layer into the rotor indigenous passage vortex close to the hub endwall. This interesting mechanism is described in a flow schematic within this paper. In a second measurement campaign the first stator blade row is clocked by half a blade pitch relative to the second stator in order to shift the relative position of both stator indigenous secondary flow fields. The comparison of the time-resolved data for both clocking cases showed a surprising result. The steady flow profiles for both cases are nearly identical. The analysis of the probe pressure signal indicates a high level of unsteadiness that is due to the periodic occurrence of the shed first stator secondary flow field.


  • Vortex-Wake-Blade Interaction in a Shrouded Axial Turbine

    by J. Schlienger, A. I. Kalfas, R. S. Abhari

    This paper presents the results of time-resolved flow field measurements of a multistage shrouded axial turbine. The unsteady interaction mechanism between the rotor’s secondary flow vortices, the rotor’s wake and the adjacent blading at the exit plane of the first turbine stage is of prime interest and analysed in detail. Three key phases are identified for one blade passing event. The first phase shows a quasi undisturbed convection of the rotor’s secondary flow field into the downstream stator. The second phase shows a migration of high loss fluid from the wake layer into the passage and horse-shoe vortices at the rotor hub section. The relative motion between the rotor and stator blades brings the two vortices closer to the wake layer and lets the flow features interact with each other. The third phase focuses on the rotor indigenous hub vortices that are bent and stretched around the stator’s leading edge. The signal analysis of the time-resolved flow field indicates a high level of unsteadiness at the stator’s pressure side. The associated unsteadiness within the flow field is evaluated and quantified on the basis of pitchwise averaged space-time diagrams. The obtained results are finally discussed and explained using two flow schematics within and at the end of the paper.


  • Fluid Dynamics and Performance of Partially and Fully Shrouded Axial Turbines

    by L. Porreca, T. Behr, J. Schlienger, A. I. Kalfas, R. S. Abhari, J. Ehrhard, E. Janke

    A unique comparative experimental and numerical investigation carried out on two test cases with shroud configurations differing only in the labyrinth seal path, is presented in this paper. The blade geometry and tip clearance is identical in the two test cases. The geometries under investigation are representative of an axial turbine with a full and partial shroud, respectively. Global performance and flow field data were acquired and analyzed. Computational simulations were carried out to complement the investigation and to facilitate the analysis of the steady and unsteady flow measurements. A detailed comparison between the two test cases is presented in terms of flow field analysis and performance evaluation. The analysis focuses on the flow effects reflected on the overall performance in a multi-stage environment. Strong interaction between the cavity flow and the blade tip region of the rotor blades is observed up to the blade mid span. A marked effect of this interaction can be seen in the downstream second stator where different vortex structures are observed. Moreover, in the partial shroud test case, a strong tip leakage vortex is developed from the first rotor and transported through the downstream blade row. A measurable change in the second stage efficiency was observed between the two test cases. In low aspect ratio blades within a multistage environment, small changes in the cavity geometry can have a significant effect on the mainstream flow. The present analysis has shown that an integrated and matched blade-shroud aerodynamic design has to be adopted to reach optimal performances. The additional losses resulting from small variations of the sealing geometry could result in a gain of up to one point in the overall stage efficiency.


  • Unsteady, 3-Dimensional Flow Measurement Using a Miniature Virtual 4 Sensor Fast Response Aerodynamic Probe (FRAP)

    by A. Pfau, J. Schlienger, A. I. Kalfas, R. S. Abhari

    This paper introduces the new fast response aerodynamic probe, which was recently developed at the ETH Zurich. The technique provides time-resolved, three-dimensional flow measurements using the virtual four sensor technique. The concept and the evaluation of the virtual four sensor probe is discussed in detail. The basic results consist of yaw and pitch flow angles as well as the total and static pressure. They combine to form the unsteady, three dimensional flow vector. The outer diameter of the cylindrical probe head was miniaturized to 0.84mm, hence probe blockage effects as well as dynamic lift effects are reduced. The shape of the probe head was optimized in view of the manufacturing process as well as aerodynamic considerations. The optimum geometry for pitch sensitivity was found to be a cylindrical surface with the axis perpendicular to the probe shaft. The internal design of the probes led to a sensor cavity eigenfrequency of 44kHz for the yaw sensitive and 34kHz for the pitch sensitive probe. Data acquisition is done with a fully automated traversing system, which moves the probe within the test rig and samples the signal with a PC-based A/D-board. An error analysis implemented into the data reduction routines revealed acceptable accuracy for flow angles as well as pressures for many turbomachinery flows. Depending on the dynamic head of the application the yaw angle is accurate within ±0.35° and pitch angle within ±0.7°. In the final section, a comparison of time averaged results to five hole probe measurements is discussed. The advantages of the new probe, beside its unique smallness, are the complete unsteady kinematic information and the improved recording of unsteady total pressure measurement as it is pointed out in a comparison against a 2D virtual three sensor probe.


  • Effects of Labyrinth Seal Variation on Multistage Axial Turbine Flow

    by J. Schlienger, A. Pfau, A. I. Kalfas, R. S. Abhari

    The need to increase overall turbine efficiency is always a driving force for redesigning a turbine stage. In particular, the labyrinth leakage flows in the endwall regions contribute to an increase of the overall loss generation. In order to asses this mechanism, a detailed study of the effects of labyrinth seal geometry variation on the blade performance is presented. Two different shroud seal geometries have been experimentally investigated in a two stage low speed turbine facility. The seal geometries differ in the size and shape of the re-entry cavity. The baseline seal is designed with a large rectangular re-entry cavity volume in order to dissipate the kinetic energy of the accelerated leakage flow after the seal gap. The re-entry cavity volume of the alternative seal design is reduced in size and a spline shaped contour is added to the endwall using annular inserts. This modification alters the gas path of the leakage jet and changes the incidence angles on the downstream blade rows. The measurements are performed with state of the art pneumatic and fast response pressure probes at various planes within the turbine stage. It is found that the inserts improved the flow profile uniformity at the endwalls. The measurements within the stator passage reveal the origin of the tip passage vortex formation at the blade suction side, already at the inlet to the stator passage. This result does not conform to the classical secondary flow theory, which suggests that the passage vortex migrates from the pressure to the suction side within the stator passage. The origin and formation of the secondary flow passage vortices at rotor hub and stator tip is described in a flow schematic. The generation of streamwise and tangential vorticity at the interaction area of leakage and main flow field also is studied and discussed. The measured overall polytropic turbine efficiency for the second seal configuration, relative to the baseline case, is reduced by 0.3%. The change in the re-entry flow angle of the leakage gas path reduces the negative incidence angle on the rotor hub and increases it at the stator tip leading edge. The secondary flow and mixing loss is reduced at the hub and increased at the tip in the second test case with the smaller cavity volume. Hence, the combination of small clearances and inserts in the re-entry cavities shows no beneficial effect on the overall turbine efficiency.