Enyong Ding
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Enyong Ding has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Feng Xue
College of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China
10 shared publicationsChongyi Li
Department of Polymer Science College of Material Science and Engineering, South China University of Technology Guangzhou 510641 People's Republic of China
3 shared publications- Feng Xue
South China University of Technology
2 shared publications Jingqi Shang
College of Materials Science and Engineering South China University of Technology Wushan Road Guangzhou 510640 People's Republic of China
2 shared publicationsAihui Liang
Insititute of Polymer Science, College of Material Science and Engineering, South China University of Technology, Guangzhou 510641, People's Republic of China
1 shared publicationAixia Yu
Insititute of Polymer Science, College of Material Science and Engineering, South China University of Technology, Guangzhou 510641, People's Republic of China
1 shared publication
Latest Publications
- Open Access
- 16 March 2021
- Published by IWA Publishing in Water Science & Technology
- Vol. 83 (8) , 1834-1846
A new effective way to degrade methylene blue by introducing negative ions powder into Fe3O4/H2O2 system to accelerate Fe(III)/Fe(II) transformation
Negative ions powders (NIP) have been widely applied in many fields because of their natural electric field and far infrared radiation, especially in wastewater treatment. In this study, the NIP was first introduced into Fe3O4/H2O2 system to degrade methylene blue (MB). The MB removal was completely achieved at 5 h via a non-photochemical pathway and the degradation rate constant of this system is about 0.565 h−1, which is about 16 times higher than in Fe3O4/H2O2 Fenton-like system (0.035 h−1). In addition, the results of quenching experiments indicate that the electron (e−) and negative oxygen ion (•O2−) are the main reactive species. It was determined that Fe3O4@NIP is the effective component that leads to the activation of H2O2 to produce •OH, which derive from the pathway: NIP acts as an electron donor to reduce Fe(III) into Fe(II). Moreover, NIP can produce negative ions, which is also conductive to degradation. This study suggests a promising direction for the practical application of NIP based catalysis by integrating it with the Fe(III)/Fe(II) transformation process.
- 16 March 2021
- Published by IWA Publishing in Water Science & Technology
- Vol. 83 (8) , 1834-1846
Open AccessA new effective way to degrade methylene blue by introducing negative ions powder into Fe3O4/H2O2 system to accelerate Fe(III)/Fe(II) transformation
Negative ions powders (NIP) have been widely applied in many fields because of their natural electric field and far infrared radiation, especially in wastewater treatment. In this study, the NIP was first introduced into Fe3O4/H2O2 system to degrade methylene blue (MB). The MB removal was completely achieved at 5 h via a non-photochemical pathway and the degradation rate constant of this system is about 0.565 h−1, which is about 16 times higher than in Fe3O4/H2O2 Fenton-like system (0.035 h−1). In addition, the results of quenching experiments indicate that the electron (e−) and negative oxygen ion (•O2−) are the main reactive species. It was determined that Fe3O4@NIP is the effective component that leads to the activation of H2O2 to produce •OH, which derive from the pathway: NIP acts as an electron donor to reduce Fe(III) into Fe(II). Moreover, NIP can produce negative ions, which is also conductive to degradation. This study suggests a promising direction for the practical application of NIP based catalysis by integrating it with the Fe(III)/Fe(II) transformation process.
- Open Access
- 3 August 2018
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 26 (1) , 183-196
Preparation of POSS-triol/wollastonite composite particles by Liquid phase mechanochemical method and its application in UV curable coatings
POSS-coated wollastonite composite particles were prepared by the liquid phase mechano-chemical grinding of wollastonite and POSS powder together in the high pressure homogenizer [1, 2, 3, 4] for the first time. And then we prepare UV curable coatings of vinyl trimethoxy silane(VTMS) / butyl acrylate (BA) with different content of composite particles [5]. Nuclear magnetic resonance spectroscopy, scanning electron microscopy and infrared spectra were used to investigate the microstructures and morphologies of the composite. The properties of the coatings are tested by FTIR, SEM, water contact angles and so on. The results indicate that the POSS was successfully loaded on the surface of silica fume to prepare composite particles and when the addition of the composite particles is 12%, the water contact angle of the UV curable coating reaches 151.96 ∘ , and the mechanical properties of the coating are also qualified.
- 3 August 2018
- Published by Walter de Gruyter GmbH in Science and Engineering of Composite Materials
- Vol. 26 (1) , 183-196
Open AccessPreparation of POSS-triol/wollastonite composite particles by Liquid phase mechanochemical method and its application in UV curable coatings
POSS-coated wollastonite composite particles were prepared by the liquid phase mechano-chemical grinding of wollastonite and POSS powder together in the high pressure homogenizer [1, 2, 3, 4] for the first time. And then we prepare UV curable coatings of vinyl trimethoxy silane(VTMS) / butyl acrylate (BA) with different content of composite particles [5]. Nuclear magnetic resonance spectroscopy, scanning electron microscopy and infrared spectra were used to investigate the microstructures and morphologies of the composite. The properties of the coatings are tested by FTIR, SEM, water contact angles and so on. The results indicate that the POSS was successfully loaded on the surface of silica fume to prepare composite particles and when the addition of the composite particles is 12%, the water contact angle of the UV curable coating reaches 151.96 ∘ , and the mechanical properties of the coating are also qualified.
- 1 October 2017
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 103, 1107-1112
Polyacrylamide and poly( N , N -dimethylacrylamide) grafted cellulose nanocrystals as efficient flocculants for kaolin suspension
- 1 October 2017
- Published by Elsevier in International Journal of Biological Macromolecules
- Vol. 103, 1107-1112
Polyacrylamide and poly( N , N -dimethylacrylamide) grafted cellulose nanocrystals as efficient flocculants for kaolin suspension
- Open Access
- 1 September 2017
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 12 (9) , 595-598
Green preparation of Ag nanoparticles/graphite nanosheets composite
A simple chemical edge doping method to prepare the Ag nanoparticles/graphite nanosheets (Ag/GNS) composite is presented. The GNS were fabricated in water with the assistance of a high pressure homogenisation (HPH). Ag nanoparticles (Ag‐NPs) were decorated on GNS by edge doping. HPH was proved to be an efficient way to fabricate GNS with active sites to anchor metal nanoparticles in the authors’ work. The Ag/GNS composite synthesised by edge doping barely had any defects. The average diameter of the Ag‐NPs in this case was 52.6 nm. It was observed that the fabricated Ag‐NPs distributed mainly on the edge of GNS where the active sites were. The Ag/GNS composite exhibited a distinct surface‐enhanced Raman scattering effect with a low concentration of silver. The Ag‐NPs on the composite had improved stability (up to a month). It is believed that this simple and green method of nanocomposite preparation will shed some lights on the large‐scale production of metal‐nanoparticles‐decorated carbon matrices.
- 1 September 2017
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 12 (9) , 595-598
Open AccessGreen preparation of Ag nanoparticles/graphite nanosheets composite
A simple chemical edge doping method to prepare the Ag nanoparticles/graphite nanosheets (Ag/GNS) composite is presented. The GNS were fabricated in water with the assistance of a high pressure homogenisation (HPH). Ag nanoparticles (Ag‐NPs) were decorated on GNS by edge doping. HPH was proved to be an efficient way to fabricate GNS with active sites to anchor metal nanoparticles in the authors’ work. The Ag/GNS composite synthesised by edge doping barely had any defects. The average diameter of the Ag‐NPs in this case was 52.6 nm. It was observed that the fabricated Ag‐NPs distributed mainly on the edge of GNS where the active sites were. The Ag/GNS composite exhibited a distinct surface‐enhanced Raman scattering effect with a low concentration of silver. The Ag‐NPs on the composite had improved stability (up to a month). It is believed that this simple and green method of nanocomposite preparation will shed some lights on the large‐scale production of metal‐nanoparticles‐decorated carbon matrices.
- 8 October 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (6) , 3717-3735
Cellulose nanocrystals grafted with polyacrylamide assisted by macromolecular RAFT agents
- 8 October 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (6) , 3717-3735
Cellulose nanocrystals grafted with polyacrylamide assisted by macromolecular RAFT agents
- 17 May 2016
- Published by Wiley in Polymer Composites
- Vol. 39 (4) , 1064-1075
Nonisothermal crystallization kinetics in isotactic polypropylene/microcrystalline cellulose (II) composites
This study investigates the polymorphous transformation of microcrystalline cellulose at different NaOH concentrations and the nonisothermal crystallization kinetics of polypropylene/microcrystalline cellulose (II) composites by differential scanning calorimetric technique (DSC) with various cooling rates. The synchrotron X‐ray diffraction reveals that the polymorphous transition from cellulose (I) to cellulose (II) begins at NaOH concentration of 10 (wt%) and the complete transformation is obtained at the NaOH concentration of 15–20 (wt%) during the mercerization process. The Avrami equation was applied to depict the nonisothermal crystallization process and to analyze the experimental data of the composites. The DSC results show that the values of t 1/2 for iPP/MCC (II) composites are lower than that for pure iPP. The polarized optical microscopy images reveal that the peculiar hybrid shish–calabash structure (HSC) with MCC (II) fibers serving as shish and iPP spherulites as calabash finally be formed. POLYM. COMPOS., 39:1064–1075, 2018. © 2016 Society of Plastics Engineers
- 17 May 2016
- Published by Wiley in Polymer Composites
- Vol. 39 (4) , 1064-1075
Nonisothermal crystallization kinetics in isotactic polypropylene/microcrystalline cellulose (II) composites
This study investigates the polymorphous transformation of microcrystalline cellulose at different NaOH concentrations and the nonisothermal crystallization kinetics of polypropylene/microcrystalline cellulose (II) composites by differential scanning calorimetric technique (DSC) with various cooling rates. The synchrotron X‐ray diffraction reveals that the polymorphous transition from cellulose (I) to cellulose (II) begins at NaOH concentration of 10 (wt%) and the complete transformation is obtained at the NaOH concentration of 15–20 (wt%) during the mercerization process. The Avrami equation was applied to depict the nonisothermal crystallization process and to analyze the experimental data of the composites. The DSC results show that the values of t 1/2 for iPP/MCC (II) composites are lower than that for pure iPP. The polarized optical microscopy images reveal that the peculiar hybrid shish–calabash structure (HSC) with MCC (II) fibers serving as shish and iPP spherulites as calabash finally be formed. POLYM. COMPOS., 39:1064–1075, 2018. © 2016 Society of Plastics Engineers
- Open Access
- 1 October 2015
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 10 (10) , 589-591
Efficient exfoliation of molybdenum disulphide nanosheets by a high‐pressure homogeniser
A facile and fast approach is demonstrated for the production of well‐dispersed molybdenum disulphide (MoS 2 ) nanosheets through the exfoliation of MoS 2 bulk using a high‐pressure homogeniser in pure solvents. The MoS 2 bulk was infiltrated in dimethylformamide for several hours, then homogenised at 100 MPa for 10 min, followed by centrifugation to obtain few‐layer MoS 2 nanosheets. The structure and morphology of the nanosheets were examined by atomic force microscopy, X‐ray diffraction and transmission electron microscopy. The bulk also had an exfoliation in water and alcohol, but the suspension was unstable. It can be concluded that the energy as well as solvents plays a critical role in the liquid–phase exfoliation. These results provide a physical perspective for understanding the exfoliation of other layered materials in aqueous and ethanol dispersions.
- 1 October 2015
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 10 (10) , 589-591
Open AccessEfficient exfoliation of molybdenum disulphide nanosheets by a high‐pressure homogeniser
A facile and fast approach is demonstrated for the production of well‐dispersed molybdenum disulphide (MoS 2 ) nanosheets through the exfoliation of MoS 2 bulk using a high‐pressure homogeniser in pure solvents. The MoS 2 bulk was infiltrated in dimethylformamide for several hours, then homogenised at 100 MPa for 10 min, followed by centrifugation to obtain few‐layer MoS 2 nanosheets. The structure and morphology of the nanosheets were examined by atomic force microscopy, X‐ray diffraction and transmission electron microscopy. The bulk also had an exfoliation in water and alcohol, but the suspension was unstable. It can be concluded that the energy as well as solvents plays a critical role in the liquid–phase exfoliation. These results provide a physical perspective for understanding the exfoliation of other layered materials in aqueous and ethanol dispersions.
- 28 August 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 51 (87) , 15811-15814
The facile fabrication of few-layer graphene and graphite nanosheets by high pressure homogenization
Few-layer graphene and graphite nanosheets were prepared by high pressure homogenization.
- 28 August 2015
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 51 (87) , 15811-15814
The facile fabrication of few-layer graphene and graphite nanosheets by high pressure homogenization
Few-layer graphene and graphite nanosheets were prepared by high pressure homogenization.
- 11 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (13)
Preparation of polyacrylamide grafted collagen extracted from leather wastes and their application in kaolin flocculation
This is probably the first report on the synthesis of a series of novel collagen‐based flocculants (CP11, CP12, and CP13) by grafting polyacrylamide (PAM) chains onto the collagen backbone, which was directly extracted from leather shavings via alkali hydrolysis. The results from FTIR, XRD, 1H NMR, and TGA well supported that PAM chains had been successfully grafted onto collagen backbone. In addition, the micrographs of SEM revealed that the PAM grafted collagen possessed much more porous and looser surface structures in comparison with virgin collagen. Zeta potential measurement showed that the introduction of branched PAM chains helped to improve the positively charge density. Furthermore, CP12 performed the best in the kaolin flocculation with the highest flocculation rate about 24%·min−1 and could induce the generation of much larger and denser floccs for the fast settling of kaolin particles. The corresponding flocculation mechanism was also presented by analyzing the collected flocs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41556.
- 11 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (13)
Preparation of polyacrylamide grafted collagen extracted from leather wastes and their application in kaolin flocculation
This is probably the first report on the synthesis of a series of novel collagen‐based flocculants (CP11, CP12, and CP13) by grafting polyacrylamide (PAM) chains onto the collagen backbone, which was directly extracted from leather shavings via alkali hydrolysis. The results from FTIR, XRD, 1H NMR, and TGA well supported that PAM chains had been successfully grafted onto collagen backbone. In addition, the micrographs of SEM revealed that the PAM grafted collagen possessed much more porous and looser surface structures in comparison with virgin collagen. Zeta potential measurement showed that the introduction of branched PAM chains helped to improve the positively charge density. Furthermore, CP12 performed the best in the kaolin flocculation with the highest flocculation rate about 24%·min−1 and could induce the generation of much larger and denser floccs for the fast settling of kaolin particles. The corresponding flocculation mechanism was also presented by analyzing the collected flocs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41556.
- Open Access
- 1 May 2014
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 9 (5) , 308-311
Fabrication and characterisation of ultrafine leather powder: a functional reinforcement containing SiO 2 particles
The water‐based dispersion of ultrafine leather fibres was firstly prepared in the authors' laboratory by high‐pressure homogenisation. The hybridisation method of ultrafine leather fibres and SiO 2 particles was used to eliminate the serious agglomeration of ultrafine leather fibres, and finally the dry hybrid leather powder (HLP) was obtained successfully. The morphology of the HLP was investigated using scanning electron microscopy (SEM). The micrograph of SEM revealed that the leather fibres were coated with a layer of scattered SiO 2 particles and still maintained their intrinsic fibrous structures. Surface element analysis (energy dispersive X‐ray spectrometry) confirmed that the SiO 2 particles were anchored on the surface of the leather fibres. Furthermore, the formation of bonding effect between the leather fibres and the SiO 2 particles was also demonstrated by X‐ray photoelectron spectrometry measurement. The obtained leather fibres were observed to be approximately less than 30 μm in length and 70 nm in width. X‐ray diffraction analysis and thermogravimetric analysis were also used to investigate the characterisation of ultrafine leather powders, and one of the results showed that the HLP had greater thermal stability than leather shavings.
- 1 May 2014
- Published by Institution of Engineering and Technology (IET) in Micro & Nano Letters
- Vol. 9 (5) , 308-311
Open AccessFabrication and characterisation of ultrafine leather powder: a functional reinforcement containing SiO 2 particles
The water‐based dispersion of ultrafine leather fibres was firstly prepared in the authors' laboratory by high‐pressure homogenisation. The hybridisation method of ultrafine leather fibres and SiO 2 particles was used to eliminate the serious agglomeration of ultrafine leather fibres, and finally the dry hybrid leather powder (HLP) was obtained successfully. The morphology of the HLP was investigated using scanning electron microscopy (SEM). The micrograph of SEM revealed that the leather fibres were coated with a layer of scattered SiO 2 particles and still maintained their intrinsic fibrous structures. Surface element analysis (energy dispersive X‐ray spectrometry) confirmed that the SiO 2 particles were anchored on the surface of the leather fibres. Furthermore, the formation of bonding effect between the leather fibres and the SiO 2 particles was also demonstrated by X‐ray photoelectron spectrometry measurement. The obtained leather fibres were observed to be approximately less than 30 μm in length and 70 nm in width. X‐ray diffraction analysis and thermogravimetric analysis were also used to investigate the characterisation of ultrafine leather powders, and one of the results showed that the HLP had greater thermal stability than leather shavings.