Yishay Feldman
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yishay Feldman has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Anna Kossoy
Weizmann Institute of Science
4 shared publications - Iddo Pinkas
Chemical Research Support, Weizmann Institute of Science, Rehovot 7610001, Israel
4 shared publications - Reshef Tenne
Department of Molecular Chemistry and Materials Science, Weizmann Institute of Science, Herzl 234 St, Rehovot 7610001, Israel
4 shared publications - Ifat Kaplan-Ashiri
Department of Chemical Research Support, Weizmann Institute of Science, Rehovot, Israel
3 shared publications - Igor Lubomirsky
Department of Molecular Chemistry and Materials Science, Weizmann Institute of Science, Rehovot 761001, Israel
3 shared publications - Rita Rosentsveig
Department of Materials and Interfaces, Weizmann Institute, Rehovot 76100, Israel
3 shared publications
Latest Publications
- Open Access
- 22 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Discovering the crystal structure of biogenic xanthine crystals
Thin xanthine crystal plates operate as mirrors in the ocelli (small eyes) of the insect L. rozsypali (jumping bristletail), where they form superstructures that are used to reflect missed incident light back to the light detectors. Here, we present the structure of biogenic xanthine crystals and compare it to that determined for synthetic xanthine crystals. Structure determination is made possible by combining electron diffraction and x-ray diffraction, as well as 4D scanning transmission electron microscopy, with fundamental symmetry considerations and first principles calculations based on density functional theory. We find that both biogenic and synthetic structures are layered, with individual planes comprised of a planar hydrogen-bonded network. However, they are different polytypes (i.e., exhibit different stacking of the individual planes).
- 22 April 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDiscovering the crystal structure of biogenic xanthine crystals
Thin xanthine crystal plates operate as mirrors in the ocelli (small eyes) of the insect L. rozsypali (jumping bristletail), where they form superstructures that are used to reflect missed incident light back to the light detectors. Here, we present the structure of biogenic xanthine crystals and compare it to that determined for synthetic xanthine crystals. Structure determination is made possible by combining electron diffraction and x-ray diffraction, as well as 4D scanning transmission electron microscopy, with fundamental symmetry considerations and first principles calculations based on density functional theory. We find that both biogenic and synthetic structures are layered, with individual planes comprised of a planar hydrogen-bonded network. However, they are different polytypes (i.e., exhibit different stacking of the individual planes).
- Open Access
- 7 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Controlling the Morphologies of Isomorphous Single Crystals: From Symmetrical Double-Decker Flowers to Hexagonal Prisms
We demonstrate here how nitrate salts of bivalent copper, nickel, cobalt, and manganese, along with an achiral organic ligand, assemble into various structures such as symmetrical double-decker flowers, smooth elongated hexagonal bipyramids, and hexagonal prisms. Large morphological changes occur in these structures because of different metal cations, although they maintain isomorphous hexagonal crystallographic structures. Metal cations with stronger coordination to ligands (Cu and Ni) tend to form uniform crystals with unusual shapes, whereas weaker coordinating metal cations (Mn and Co) produce crystals with more regular hexagonal morphologies. The unusual flower-like crystals formed with copper nitrate have two pairs of six symmetrical petals with hexagonal convex centers. The texture of the petals indicates dendritic growth. Two different types of morphologies were formed by using different copper nitrate-to-ligand ratios. An excess of the metal salt results in uniform and monodisperse hexagonal crystals, whereas the use of an excess of ligand results in double-decker morphologies. Mechanistically, an intermediate structure was observed with slightly concave facets and a domed center. Such structures most likely play a key role in the formation of double-decker crystals that can be formed by fusion processes. The coordination chemistry results in isostructural chiral frameworks consisting of two types of continuous helical channels. Four pyridine units from four separate ligands are coordinated to the metal center in a plane having a chiral (propeller-type) arrangement. The individual double-decker flower crystals are homochiral and a batch consists of crystals having both handedness.
- 7 February 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessControlling the Morphologies of Isomorphous Single Crystals: From Symmetrical Double-Decker Flowers to Hexagonal Prisms
We demonstrate here how nitrate salts of bivalent copper, nickel, cobalt, and manganese, along with an achiral organic ligand, assemble into various structures such as symmetrical double-decker flowers, smooth elongated hexagonal bipyramids, and hexagonal prisms. Large morphological changes occur in these structures because of different metal cations, although they maintain isomorphous hexagonal crystallographic structures. Metal cations with stronger coordination to ligands (Cu and Ni) tend to form uniform crystals with unusual shapes, whereas weaker coordinating metal cations (Mn and Co) produce crystals with more regular hexagonal morphologies. The unusual flower-like crystals formed with copper nitrate have two pairs of six symmetrical petals with hexagonal convex centers. The texture of the petals indicates dendritic growth. Two different types of morphologies were formed by using different copper nitrate-to-ligand ratios. An excess of the metal salt results in uniform and monodisperse hexagonal crystals, whereas the use of an excess of ligand results in double-decker morphologies. Mechanistically, an intermediate structure was observed with slightly concave facets and a domed center. Such structures most likely play a key role in the formation of double-decker crystals that can be formed by fusion processes. The coordination chemistry results in isostructural chiral frameworks consisting of two types of continuous helical channels. Four pyridine units from four separate ligands are coordinated to the metal center in a plane having a chiral (propeller-type) arrangement. The individual double-decker flower crystals are homochiral and a batch consists of crystals having both handedness.
- Open Access
C-Axis Textured, 2â3 Îźm Thick Al0.75Sc0.25N Films Grown on Chemically Formed TiN/Ti Seeding Layers for MEMS Applications
A protocol for successfully depositing [001] textured, 2–3 µm thick films of Al0.75Sc0.25N, is proposed. The procedure relies on the fact that sputtered Ti is [001]-textured -phase (hcp). Diffusion of nitrogen ions into the α-Ti film during reactive sputtering of Al0.75,Sc0.25N likely forms a [111]-oriented TiN intermediate layer. The lattice mismatch of this very thin film with Al0.75Sc0.25N is ~3.7%, providing excellent conditions for epitaxial growth. In contrast to earlier reports, the Al0.75Sc0.25N films prepared in the current study are Al-terminated. Low growth stress (<100 MPa) allows films up to 3 µm thick to be deposited without loss of orientation or decrease in piezoelectric coefficient. An advantage of the proposed technique is that it is compatible with a variety of substrates commonly used for actuators or MEMS, as demonstrated here for both Si wafers and D263 borosilicate glass. Additionally, thicker films can potentially lead to increased piezoelectric stress/strain by supporting application of higher voltage, but without increase in the magnitude of the electric field.Open AccessC-Axis Textured, 2â3 Îźm Thick Al0.75Sc0.25N Films Grown on Chemically Formed TiN/Ti Seeding Layers for MEMS Applications
A protocol for successfully depositing [001] textured, 2–3 µm thick films of Al0.75Sc0.25N, is proposed. The procedure relies on the fact that sputtered Ti is [001]-textured -phase (hcp). Diffusion of nitrogen ions into the α-Ti film during reactive sputtering of Al0.75,Sc0.25N likely forms a [111]-oriented TiN intermediate layer. The lattice mismatch of this very thin film with Al0.75Sc0.25N is ~3.7%, providing excellent conditions for epitaxial growth. In contrast to earlier reports, the Al0.75Sc0.25N films prepared in the current study are Al-terminated. Low growth stress (<100 MPa) allows films up to 3 µm thick to be deposited without loss of orientation or decrease in piezoelectric coefficient. An advantage of the proposed technique is that it is compatible with a variety of substrates commonly used for actuators or MEMS, as demonstrated here for both Si wafers and D263 borosilicate glass. Additionally, thicker films can potentially lead to increased piezoelectric stress/strain by supporting application of higher voltage, but without increase in the magnitude of the electric field. - Open Access
Poly(L-lactic acid) Reinforced with Hydroxyapatite and Tungsten Disulfide Nanotubes
Poly(L-lactic acid) (PLLA) is a biocompatible, biodegradable, and semi-crystalline polymer with numerous applications including food packaging, medical implants, stents, tissue engineering scaffolds, etc. Hydroxyapatite (HA) is the major component of natural bone. Conceptually, combining PLLA and HA could produce a bioceramic suitable for implants and bone repair. However, this nanocomposite suffers from poor mechanical behavior under tensile strain. In this study, films of PLLA and HA were prepared with small amounts of nontoxic WS2 nanotubes (INT-WS2). The structural aspects of the films were investigated via electron microscopy, X-ray diffraction, Raman microscopy, and infrared absorption spectroscopy. The mechanical properties were evaluated via tensile measurements, micro-hardness tests, and nanoindentation. The thermal properties were investigated via differential scanning calorimetry. The composite films exhibited improved mechanical and thermal properties compared to the films prepared from the PLLA and HA alone, which is advantageous for medical applications.
Open AccessPoly(L-lactic acid) Reinforced with Hydroxyapatite and Tungsten Disulfide Nanotubes
Poly(L-lactic acid) (PLLA) is a biocompatible, biodegradable, and semi-crystalline polymer with numerous applications including food packaging, medical implants, stents, tissue engineering scaffolds, etc. Hydroxyapatite (HA) is the major component of natural bone. Conceptually, combining PLLA and HA could produce a bioceramic suitable for implants and bone repair. However, this nanocomposite suffers from poor mechanical behavior under tensile strain. In this study, films of PLLA and HA were prepared with small amounts of nontoxic WS2 nanotubes (INT-WS2). The structural aspects of the films were investigated via electron microscopy, X-ray diffraction, Raman microscopy, and infrared absorption spectroscopy. The mechanical properties were evaluated via tensile measurements, micro-hardness tests, and nanoindentation. The thermal properties were investigated via differential scanning calorimetry. The composite films exhibited improved mechanical and thermal properties compared to the films prepared from the PLLA and HA alone, which is advantageous for medical applications.
- Open Access
Calcium Sulfate Hemihydrate (Bassanite) Crystals in the Wood of the Tamarix Tree
The most abundant mineral produced in the wood and leaves of trees is calcium oxalate monohydrate (whewellite), and after burning the wood the ash obtained is calcite. In the case of the Tamarix sp. tree, the freshly prepared ash is calcium sulfate (anhydrite). The aim of this study is to determine the calcium sulfate mineral phase in the fresh wood of Tamarix aphylla prior to burning. SEM images of the crystals show that they express smooth faces, are about 5â15 microns in their longest dimensions and are located in the ray cells. Fourier transform infrared spectroscopy (FTIR) and Raman microspectroscopy of the crystals in the wood and after extraction, both showed that the crystals are composed of calcium sulfate hemihydrate (bassanite). As elemental analyses of the crystals showed that in addition to calcium and sulfur, around 20 atom percent of the cations are sodium and potassium, we also obtained an X-ray powder diffraction pattern. This pattern excluded the possibility that the crystals are composed of another related mineral, and confirmed that, indeed, the crystals in the T. aphylla wood are composed of calcium sulfate hemihydrate (bassanite).
Open AccessCalcium Sulfate Hemihydrate (Bassanite) Crystals in the Wood of the Tamarix Tree
The most abundant mineral produced in the wood and leaves of trees is calcium oxalate monohydrate (whewellite), and after burning the wood the ash obtained is calcite. In the case of the Tamarix sp. tree, the freshly prepared ash is calcium sulfate (anhydrite). The aim of this study is to determine the calcium sulfate mineral phase in the fresh wood of Tamarix aphylla prior to burning. SEM images of the crystals show that they express smooth faces, are about 5â15 microns in their longest dimensions and are located in the ray cells. Fourier transform infrared spectroscopy (FTIR) and Raman microspectroscopy of the crystals in the wood and after extraction, both showed that the crystals are composed of calcium sulfate hemihydrate (bassanite). As elemental analyses of the crystals showed that in addition to calcium and sulfur, around 20 atom percent of the cations are sodium and potassium, we also obtained an X-ray powder diffraction pattern. This pattern excluded the possibility that the crystals are composed of another related mineral, and confirmed that, indeed, the crystals in the T. aphylla wood are composed of calcium sulfate hemihydrate (bassanite).
- Open Access
A Tale of Two Tiles: Characterization of Floor Tiles from the Nineteenth-Century Akko Tower Shipwreck (Israel)
Fragments of decorated floor tiles were retrieved from the Akko Tower shipwreck, Israel. Most tiles were made of bright brown fired clay with a white glaze decorated with colored stenciled motifs (Type A); and others consisted of a red-brown fired clay body, coated with a brown pigment covered with transparent brown glaze (Type B). This study aimed to characterize the two tile types; to reveal information concerning the manufacturing process; and to determine the origin of their raw material. A multidisciplinary approach was used, including light microscopy, SEM-EDS, electron probe microanalysis with wavelength-dispersive X-ray spectroscopy (EPMA-WDS), XRD, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analyses. The characterization of both tile types demonstrated the use of different raw materials. The Type A tiles were covered with tin-opacified majolica glaze and colored with various mixtures of pigments. The blue color was due to pigment rich in cobalt; the yellow color was due to Naples yellow and lead-tin yellow I minerals; and the green, orange, and brown colors were all prepared by mixing the Naples yellow pigment with different minerals. These majolica glaze tiles were probably manufactured in Sicily. The brown coating of the Type B tiles was due to pigment rich in lead and iron minerals. These tiles were produced with different manufacturing processes, and apparently made in France.
Open AccessA Tale of Two Tiles: Characterization of Floor Tiles from the Nineteenth-Century Akko Tower Shipwreck (Israel)
Fragments of decorated floor tiles were retrieved from the Akko Tower shipwreck, Israel. Most tiles were made of bright brown fired clay with a white glaze decorated with colored stenciled motifs (Type A); and others consisted of a red-brown fired clay body, coated with a brown pigment covered with transparent brown glaze (Type B). This study aimed to characterize the two tile types; to reveal information concerning the manufacturing process; and to determine the origin of their raw material. A multidisciplinary approach was used, including light microscopy, SEM-EDS, electron probe microanalysis with wavelength-dispersive X-ray spectroscopy (EPMA-WDS), XRD, Raman spectroscopy, and time-of-flight secondary ion mass spectrometry (TOF-SIMS) analyses. The characterization of both tile types demonstrated the use of different raw materials. The Type A tiles were covered with tin-opacified majolica glaze and colored with various mixtures of pigments. The blue color was due to pigment rich in cobalt; the yellow color was due to Naples yellow and lead-tin yellow I minerals; and the green, orange, and brown colors were all prepared by mixing the Naples yellow pigment with different minerals. These majolica glaze tiles were probably manufactured in Sicily. The brown coating of the Type B tiles was due to pigment rich in lead and iron minerals. These tiles were produced with different manufacturing processes, and apparently made in France.
- Open Access
Archaeological Ceramic Diagenesis: Clay Mineral Recrystallization in Sherds from a Late Byzantine Kiln, Israel
The pseudo-amorphous clay components of some of the pottery sherds that formed a surface in the firing chamber of a Late Byzantine kiln were shown by Fourier Transform Infrared Spectroscopy to have undergone almost complete recrystallization. Powder X-ray diffraction showed that the crystalline montmorillonite component of these sherds increased and kaolinite formed de novo. As this recrystallization process only occurred in the center of the firing chamber, we infer that the recrystallization process was due to repeated exposure of the sherds to high temperatures. The zeolite gonnardite was identified by X-ray diffraction. The chemical compositions of sodium-rich minerals, determined by energy dispersive X-ray spectroscopy (EDS), are consistent with the presence of gonnardite and analcime, and showed that the sodium was partially substituted by calcium and other cations. As these zeolites were also present in sherds from the upper pottery chamber, they did not form only as a result of repeated exposure to high temperatures. The demonstration that the clay mineral component of ceramics can undergo diagenetic recrystallization supports the possibility that provenience studies based on elemental analyses, especially of cooking pots that are repeatedly exposed to high temperatures, may be affected by recrystallization.
Open AccessArchaeological Ceramic Diagenesis: Clay Mineral Recrystallization in Sherds from a Late Byzantine Kiln, Israel
The pseudo-amorphous clay components of some of the pottery sherds that formed a surface in the firing chamber of a Late Byzantine kiln were shown by Fourier Transform Infrared Spectroscopy to have undergone almost complete recrystallization. Powder X-ray diffraction showed that the crystalline montmorillonite component of these sherds increased and kaolinite formed de novo. As this recrystallization process only occurred in the center of the firing chamber, we infer that the recrystallization process was due to repeated exposure of the sherds to high temperatures. The zeolite gonnardite was identified by X-ray diffraction. The chemical compositions of sodium-rich minerals, determined by energy dispersive X-ray spectroscopy (EDS), are consistent with the presence of gonnardite and analcime, and showed that the sodium was partially substituted by calcium and other cations. As these zeolites were also present in sherds from the upper pottery chamber, they did not form only as a result of repeated exposure to high temperatures. The demonstration that the clay mineral component of ceramics can undergo diagenetic recrystallization supports the possibility that provenience studies based on elemental analyses, especially of cooking pots that are repeatedly exposed to high temperatures, may be affected by recrystallization.
- Open Access
- 25 March 2019
- Published by MDPI AG in Lubricants
- Vol. 7  (3) , 28
Nanocomposite of Poly(l-Lactic Acid) with Inorganic Nanotubes of WS2
Composites of poly(l-lactic acid) (PLLA) reinforced by adding inorganic nanotubes of tungsten disulfide (INTâWS2) were prepared by solvent casting. In addition to the pristine nanotubes, PLLA nanocomposites containing surface modified nanotubes were studied as well. Several surface-active agents, including polyethylene imine (PEI), were studied in this context. In addition, other biocompatible polymers, like poly d,l-lactic acid (PDLLA) and others were considered in combination with the INTâWS2. The nanotubes were added to the polymer in different proportions up to 3 wt %. The dispersion of the nanotubes in the nanocomposites were analyzed by several techniques, including X-ray tomography microscopy (Micro-XCT). Moreover, high-temperature rheological measurements of the molten polymer were conducted. In contrast to other nanoparticles, which lead to a considerable increase of the viscosity of the molten polymer, the WS2 nanotubes did not affect the viscosity significantly. They did not affect the complex viscosity of the molten PLLA phase, either. The mechanical and tribological properties of the nanocomposites were found to improve considerably by adding the nanotubes. A direct correlation was observed between the dispersion of the nanotubes in the polymer matrix and its mechanical properties.
- 25 March 2019
- Published by MDPI AG in Lubricants
- Vol. 7  (3) , 28
Open AccessNanocomposite of Poly(l-Lactic Acid) with Inorganic Nanotubes of WS2
Composites of poly(l-lactic acid) (PLLA) reinforced by adding inorganic nanotubes of tungsten disulfide (INTâWS2) were prepared by solvent casting. In addition to the pristine nanotubes, PLLA nanocomposites containing surface modified nanotubes were studied as well. Several surface-active agents, including polyethylene imine (PEI), were studied in this context. In addition, other biocompatible polymers, like poly d,l-lactic acid (PDLLA) and others were considered in combination with the INTâWS2. The nanotubes were added to the polymer in different proportions up to 3 wt %. The dispersion of the nanotubes in the nanocomposites were analyzed by several techniques, including X-ray tomography microscopy (Micro-XCT). Moreover, high-temperature rheological measurements of the molten polymer were conducted. In contrast to other nanoparticles, which lead to a considerable increase of the viscosity of the molten polymer, the WS2 nanotubes did not affect the viscosity significantly. They did not affect the complex viscosity of the molten PLLA phase, either. The mechanical and tribological properties of the nanocomposites were found to improve considerably by adding the nanotubes. A direct correlation was observed between the dispersion of the nanotubes in the polymer matrix and its mechanical properties.
- Open Access
- 26 February 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19  (3) , 657
Electrophoretic Deposition of Hydroxyapatite Film Containing Re-Doped MoS2 Nanoparticles
Films combining hydroxyapatite (HA) with minute amounts (ca. 1 weight %) of (rhenium doped) fullerene-like MoS2 (IF) nanoparticles were deposited onto porous titanium substrate through electrophoretic process (EPD). The films were analyzed by scanning electron microscopy (SEM), X-ray diffraction and Raman spectroscopy. The SEM analysis showed relatively uniform coatings of the HA + IF on the titanium substrate. Chemical composition analysis using energy dispersive X-ray spectroscopy (EDS) of the coatings revealed the presence of calcium phosphate minerals like hydroxyapatite, as a majority phase. Tribological tests were undertaken showing that the IF nanoparticles endow the HA film very low friction and wear characteristics. Such films could be of interest for various medical technologies. Means for improving the adhesion of the film to the underlying substrate and its fracture toughness, without compromising its biocompatibility are discussed at the end.
- 26 February 2018
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 19  (3) , 657
Open AccessElectrophoretic Deposition of Hydroxyapatite Film Containing Re-Doped MoS2 Nanoparticles
Films combining hydroxyapatite (HA) with minute amounts (ca. 1 weight %) of (rhenium doped) fullerene-like MoS2 (IF) nanoparticles were deposited onto porous titanium substrate through electrophoretic process (EPD). The films were analyzed by scanning electron microscopy (SEM), X-ray diffraction and Raman spectroscopy. The SEM analysis showed relatively uniform coatings of the HA + IF on the titanium substrate. Chemical composition analysis using energy dispersive X-ray spectroscopy (EDS) of the coatings revealed the presence of calcium phosphate minerals like hydroxyapatite, as a majority phase. Tribological tests were undertaken showing that the IF nanoparticles endow the HA film very low friction and wear characteristics. Such films could be of interest for various medical technologies. Means for improving the adhesion of the film to the underlying substrate and its fracture toughness, without compromising its biocompatibility are discussed at the end.
- 3 January 2018
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 4  (1) , 103-114
Efficient Chloride Salt Extraction of Platinum Group Metals from Spent Catalysts
- 3 January 2018
- Published by Springer Nature in Journal of Sustainable Metallurgy
- Vol. 4  (1) , 103-114
Efficient Chloride Salt Extraction of Platinum Group Metals from Spent Catalysts