Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kemei Pei has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Waterborne Polyurethane Reinforced with SiO2-Modified TiO2: Enhanced Mechanical Properties and Retained Hydrostatic Pressure Resistance

    by Shuyi Wang, Weiping Yao, Xia Lin, Yamin Xu, Kemei Pei, Yuhai Lu

    Driven by the growing demand for functional textiles featuring excellent waterproofness, moisture permeability and mechanical robustness in outdoor sportswear, medical protection and technical apparel, traditional pongee—despite its desirable softness, high wrinkle resistance and good stability as an ideal substrate fabric—is severely restricted in further application by its intrinsically poor hydrostatic pressure resistance in extremely wet environments. Accordingly, we developed a modified waterborne polyurethane (WPU) coating for pongee substrates to fabricate functional textiles that maintain high hydrostatic pressure resistance while possessing good mechanical properties and increased UV absorption. In this study, by using the sol–gel method, an amorphous silicon dioxide (SiO2) coating layer was constructed on the surface of titanium dioxide (TiO2) particles, forming silica-modified titania particles (SiO2/TiO2). These SiO2-modified particles were subsequently physically blended with an anionic waterborne polyurethane system that had been previously modified with a polyester-type modifier A to enhance its hydrostatic pressure resistance. The resulting composite coating was designed to combine the high hydrostatic pressure resistance inherited from the modified WPU matrix, the mechanical reinforcement and increased UV absorption contributed by SiO2/TiO2, and satisfactory water repellency on fabric substrates. The results indicate that the incorporation of an appropriate amount of modifier A into the prepolymer system significantly enhances hydrostatic pressure resistance while maintaining high elongation at break. At a SiO2/TiO2 loading of 0.2 wt%, the composite film exhibits optimal comprehensive performance, characterized by superior mechanical properties, low water absorption, and static water contact angles exceeding 100° for coated fabrics. SiO2/TiO2 composite WPU coatings substantially improve hydrostatic pressure resistance across various fabrics, with 380T polyester taffeta demonstrating the best performance. This resistance remains remarkably stable after standard washing, indicating excellent wash fastness and practical applicability.

  • Recent Development on the Preparation Processes of Co‐Free Ni‐Rich Layered Oxide Cathode Materials

    by Jingzhuo Tang, Xiuhua Zhang, Kemei Pei, Zhengfei Chen

    Lithium‐ion batteries (LIBs) are the dominant technology for electrochemical energy storage. However, the surging demand for LIBs has intensified concerns over cobalt (Co) scarcity, ethical sourcing, and cost volatility. To overcome these challenges, Co‐free Ni‐rich layered cathode materials have attracted growing attention. This review provides a comprehensive overview of recent developments in their preparation processes and performance optimization. The dual role of Co in conventional cathodes is first clarified: Co mitigates Li/Ni cation disorder but also induces lattice distortion, oxygen release, and microcrack formation. Eliminating Co, however, aggravates Rich‐Ni‐related issues such as structural phase transitions and severe Li/Ni cation mixing, which compromise structural and electrochemical stability. Recent progress in addressing these challenges is summarized, focusing on composition regulation, surface engineering, and structural design strategies. Preparation methodologies are discussed in detail, including wet chemical approaches that enable precise control over morphology and composition control, and solid‐state techniques that offer scalability for industrial application. Optimized Co‐free Ni‐rich layered materials exhibit enhanced capacity retention, structural integrity, and thermal stability. Finally, the review highlights future research directions toward simplified processes, synergistic multi‐technology coupling, and data‐driven design to promote the commercialization of Co‐free Ni‐rich layered oxide cathodes for electric vehicles and large‐scale energy storage systems.


  • Open Access

    Synthesis and Properties Study of Liquid Crystalline Epoxy Resin Containing Azomethine-Based Monomeric Mesogens

    by Junjie Huang, Hongmei Pan, Deliang Le, Zengxin Ouyang, Kemei Pei

    The epoxy monomer N,1-bis(4-(2-oxiranemethoxy)phenyl)methylamine (HBAP-EP) was synthesized through the Schiff base reaction and epichlorohydrin method, and the HBAP-EP monomer was cured using p-aminobenzene sulfonamide (SAA). Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and polarizing optical microscopy (POM) demonstrated that the epoxy monomer exhibits reversible liquid crystal properties, and the liquid crystal fraction of the monomer can reach 14.4% after curing at 120 °C. The fracture toughness of the resin cured at 120 °C can reach 0.93 KJ·m−2, and its thermal conductivity is 0.3229 W·(m·K)−1, both of which are higher than those of ordinary epoxy resin.


  • Open Access

    Synthesis and characterization of non-ionic flame-retardant waterborne polyurethane

    by Hongping Tong, Weimin Wang, Gui Wang, Xiaojun Wang, Dongmei Yu, Bajin Chen, Kemei Pei

    Waterborne polyurethane (WPU) offers many advantages and is widely used in coatings, leathers, adhesives, biomaterials, and other consumer products. However, WPU is highly flammable. Many reactive flame retardants have been developed, but their char formation efficiency is still unsatisfactory, and the melt dripping during combustion has not been effectively suppressed. In this paper, a novel phosphorus-containing flame retardant with dihydroxy groups, (6-((4-hydroxyphenyl)((4-hydroxyphenyl)amino)methyl) dibenzo[c,e][1,2]oxaphosphinine 6-oxide) (PHAD), was successfully synthesized and incorporated into WPU molecular chain as a chain extender, thereby synthesizing a series of non-ionic flame-retardant waterborne polyurethane (NFRWPU) emulsions. The chemical structure of NFRWPU was successfully characterized by Fourier transform infrared spectroscopy and nuclear magnetic resonance. With the help of a thermogravimetric analyzer, scanning electron microscope and other instruments, some key performance parameters of NFRWPU in applications were investigated, including: physical, mechanical, and thermal stability and flammability. Some important experimental results include: both the particle size and viscosity of the emulsion increase gradually with increasing PHAD content, and when the PHAD content reaches 12%, the average particle size of emulsion increases to 106.6 nm with a viscosity of 89 mPa s; with the addition of PHAD, the tensile strength of NFRWPU initially increased and then decreased, while the elongation at break showed a continuous downward trend. The maximum tensile strength reached 22.63 MPa, and the minimum elongation at break dropped to 1060%; the addition of PHAD improved the thermal stability and flame retardancy of the film, with the highest limiting oxygen index value reaching 25.6% and the maximum carbon residue increasing to 6.5%. All these results indicate that NFRWPU is a promising flame retardant WPU considering the comprehensive performance.


  • Open Access

    Synthesis of a Reactive Cationic/Nonionic Waterborne Polyurethane Dye Fixative and Its Application Performance on Viscose Fiber Fabrics

    by Changyu Deng, Jiacheng Jin, Hong Zhang, Jiahui Li, Kemei Pei

    A series of cationic waterborne polyurethane (CWPU) emulsions was synthesized with isophorone diisocyanate (IPDI) and hexamethylene diisocyanate (HDI) as hard segments; polyol (N210) and polyethylene glycol (PEG-2000) as soft segments; N-methyldiethanolamine (MDEA) as a hydrophilic chain extender; and trimethylolpropane (TMP) as a crosslinker. Then, the effects of the R-value, MDEA content, and TMP content on the properties of the CWPU emulsion, film, and fabric treatment were investigated. The results indicated that when the R-value was 3.0, the MEDA content accounted for 4.0% of the solid and the TMP content accounted for 1.0% of the solid. CWPU has excellent storage stability. Applying it to the fixing treatment of the viscose fiber fabrics can effectively improve the color fastness to rubbing, elasticity, surface smoothness, and anti-static properties.


  • Open Access

    Preliminary Results on Preparation and Performance of a Self-Emulsifying Waterborne Epoxy Curing Agent at Room Temperature

    by Zhenzhen Pi, Changyu Deng, Hongmei Pan, Kemei Pei

    Polyethylene glycol 1000 (PEG1000) and epoxy resin E20 were used to synthesize the E20/PEG1000 polymer (EP1K), which was later transformed into a self-emulsifying water-based epoxy curing agent by reacting with m-Xylylenediamine (MXDA). The effects of molecular weight, the molar ratio of the raw materials, the catalyst dosage, and the different co-solvents on the properties of the prepared curing agent were systematically explored. The infrared absorption spectra of E20, EP1K, and the water-based epoxy curing agent were compared and analyzed. The coating properties of the waterborne epoxy varnish, which was based on water-based epoxy curing agents to emulsify and cure the resin E44, were systematically tested. The results demonstrated that with a molar ratio of 1:1:4 of PEG1000, E20, and MXDA, the boron trifluoride etherate (BF3·Et2O) as catalyst accounts for 0.3% of the total mass of E20 and PEG1000, and an applicable period of 3 h for the prepared varnish, the anti-corrosion performance, and mechanical properties of the coatings were excellent.


  • Open Access

    Upcycling waste expanded polystyrene into UV-excited dual-mode multicolor luminescent electrospun fiber membranes for advanced anti-counterfeiting

    by Yunjie Fan, Huanyou Su, Pengfei Li, Mingmin Lin, Dan Liu, Kemei Pei, Xuebo Cao

    Expanded polystyrene (EPS) is causing severe environmental problems due to its high consumption and non-biodegradability. Upcycling waste EPS into high value-added functional materials is highly advisable in terms of sustainability and environmental concerns. Meanwhile, it is imperative to develop new anti-counterfeiting materials with high security against increasingly high-tech counterfeiting. Developing UV-excited dual-mode luminescent advanced anti-counterfeiting materials that can be excited by commonly used commercial UV light sources (such as 254 nm and 365 nm wavelengths) remains a challenge. Herein, UV-excited dual-mode multicolor luminescent electrospun fiber membranes were fabricated from waste EPS by co-doping with a Eu3+ complex and a Tb3+ complex via electrospinning. The SEM results prove that the lanthanide complexes are uniformly dispersed in the PS matrix. The luminescence analysis results suggest that all the as-prepared fiber membranes with the different mass ratios of the two complexes can exhibit the characteristic emission of Eu3+ ions and Tb3+ ions under UV light excitation. The corresponding fiber membrane samples can exhibit intense visible luminescence with different colors under UV lights. Moreover, each membrane sample can display different color luminescence irradiated with UV light at 254 nm and 365 nm, respectively, e.g. show excellent UV-excited dual-mode luminescent properties. This is owing to the different UV absorption properties of the two lanthanide complexes doped in the fiber membrane. Finally, the fiber membranes with different color luminescence from green light to red light were achieved by tuning the mass ratio of the two complexes in the PS matrix and changing UV irradiation wavelengths. The as-prepared fiber membranes with tunable multicolor luminescence are very promising for high-level anti-counterfeiting applications. This work is very meaningful not only to upcycle waste EPS to high value-added functional products but also to develop advanced anti-counterfeiting materials.