JCJean-Pierre Cariou

Jean-Pierre Cariou

*This is an algorithmically generated author record based on publicly available information.

Jean-Pierre Cariou has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Wind speed reconstruction from mono-static wind lidar eliminating the effect of turbulence

    by Peter Rosenbusch, Paul Mazoyer, Laurie Pontreau, Pierre Etienne Allain, Jean-Pierre Cariou

    Light detection and ranging (lidar) is an attractive technique to measure wind speed via the Doppler effect, thanks to its flexibility. Although stand-alone deployment is growing, current standards for wind energy applications often require wind lidars to be verified against an in situ met mast with cup anemometers, which deliver point-like measurements. Analyzing 38 lidar-to-cup verification campaigns at eight accredited sites, we investigate the difference between these techniques during turbulence influenced atmospheric conditions. We demonstrate that strong turbulence results in the lidar 10-min scalar average wind speed overestimate the cup value, whereas the lidar vector average results in an underestimate. Although scalar and vector averaging provide acceptable measurements, we show that a linear combination, with appropriate weighting, reduces the lidar turbulence sensitivity by more than one order of magnitude. The resulting overall lidar-to-cup bias is within the one-standard-deviation comparison uncertainty at all sites. The resulting ensemble mean bias is (−0.14±0.42)% , where the uncertainty stems from variations between sites. We explain the experimental observations by a model derived from first principles. The developed hybrid averaging is implemented in the Leosphere WindCube v2.1 wind lidar.


  • Performances and applications of coherent pulsed fiber lidars in atmospheric sensing

    by Jean-Pierre Cariou

    New generation infrared Wind Doppler Lidars benefit from reliable fiber lasers. Thanks to more than 1200 wind Doppler Lidars deployed worldwide by LEOSPHERE, lidar performance is demonstrated in various atmospheric conditions for wind energy, meteo and airport applications.

  • Open Access

    Comparison and validation of wake vortex characteristics collected at different airports by different scanning lidar sensors

    by Ludovic Thobois, Jean-Pierre Cariou, Valerio Cappellazzo, Christian Musson, Vincent Treve

    Today, the demand for increasing airport capacity is high, in particular for increasing runway throughput from an ATM perspective. Runway capacity is often directly linked with the minima longitudinal separation between aircraft on approach phase or between aircraft on departure. The separation minima are based on surveillance capabilities and on wake turbulence (WT) in order to mitigate respectively collision risk and WT-induced accidents, therefore WT hazard becomes a major concern for ATM. For ten years, many research LIDAR systems have been used for better understanding wake vortices behaviors in the operational environment within large range of wind and turbulence conditions. All these studies[1][2] helped to design new concepts of wake separations between aircrafts thanks to the proven capabilities of LIDAR systems to assess the risks of wake vortex (WV) encounters through the circulation retrievals. The re-categorization project, called RECAT [8], has been launched by a joint EUROCONTROL – FAA initiative in order to renew and optimize the out-of-date currently applied ICAO regulations on distance separation. Nowadays, the first phase of regional RECAT projects, which consists in defining new distance separation matrices composed of six/seven static aircraft categories instead of three, entered the operational phase and is deployed in several airports in United States and Europe. In addition, other concepts like Time-Based Separation have also been studied and deployed in London Heathrow. The airports where these solutions have been deployed obtained significant benefits as increased runway throughput and improved resilience to disruptions. For implementing such new WT solutions at an airport, a local safety assessment before the implementation and a risk monitoring after are usually needed. Before implementation, it may be required to determine for the targeted airport the relative variations of risk of wake vortex encounters, given the local ATM rules, the traffic mix, the weather conditions and their impact on the wake vortex decay. After implementation, the risk monitoring might perform in-depth analysis of wake vortex encounter reported by pilots. For all the mentioned steps, the use of scanning Doppler LIDARs is the only experimental sensor capable of measuring the localization and the circulation of the wake vortices and to provide ground truth wake vortex measurements. Next generation operational LIDARs need to be developed to address in a cost effective way these operational needs. Furthermore, a specific configuration and methodology need to be developed to ensure the accuracy of the wake vortex data. Such a LIDAR based wake vortex solution has been tested at Paris Charles De Gaulle which implemented the RECAT-EU wake separation scheme. The wake vortex circulation, initial spacing and decay measured have been compared to the data collected in London Heathrow by a different LIDAR sensor. The results indicated that the initial circulation, the time to demise, the decay curve evolution and the vortex spacing are very coherent between the two databases.


  • Open Access

    Long-Range WindScanner System

    by Nikola Vasiljević, Guillaume Lea, Michael Courtney, Jean-Pierre Cariou, Jakob Mann, Torben Mikkelsen

    The technical aspects of a multi-Doppler LiDAR instrument, the long-range WindScanner system, are presented accompanied by an overview of the results from several field campaigns. The long-range WindScanner system consists of three spatially-separated, scanning coherent Doppler LiDARs and a remote master computer that coordinates them. The LiDARs were carefully engineered to perform user-defined and time-controlled scanning trajectories. Their wireless coordination via the master computer allows achieving and maintaining the LiDARs’ synchronization within ten milliseconds. The long-range WindScanner system measures the wind field by emitting and directing three laser beams to intersect, and then scanning the beam intersection over a region of interest. The long-range WindScanner system was developed to tackle the need for high-quality observations of wind fields on scales of modern wind turbine and wind farms. It has been in operation since 2013.


  • Open Access

    Long-range WindScanner System

    by Nikola Vasiljevic, Guillaume Lea, Michael Courtney, Jean-Pierre Cariou, Jakob Mann, Torben Mikkelsen

    In this paper, the technical aspects of a multi-lidar instrument, the long-range WindScanner system, will be presented accompanied by an overview of the results from several field campaigns. The long-range WindScanner system consists of three spatially separated coherent Doppler scanning lidars and a remote master computer that coordinates them. The lidars were carefully engineered to perform arbitrary and time controlled scanning trajectories. Their wireless coordination via the master computer allows achieving and maintaining lidars’ synchronization within ten milliseconds. As a whole, the long-range WindScanner system can measure an entire wind field by emitting and directing three laser beams to intersect, and then by moving the beam intersection over the points of interest. The long-range WindScanner system was developed to tackle the need for high-quality observations of wind fields from scales of modern wind turbine and wind farms. It has been in operation since 2013.


  • Open Access

    Détection et analyse automatique des aérosols atmosphériques par lidar ultraviolet ou infrarouge

    by Jean-Pierre Cariou, Ludovic Thobois, Philippe Royer

    Photoniques, la revue francophone des solutions optiques, revue de la Société Française d Optique (SFO)

  • Open Access

    Détection et analyse automatique des aérosols atmosphériques par lidar Raman

    by Jean-Pierre Cariou, Ludovic Thobois, Anthony Bizard