Li-Rong Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Li-Rong Zheng has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Hannu Tenhunen
School of Information and Communication Technologies, Royal Institute of Technology (KTH), Electrum 229, SE-164 40 Kista-Stockholm, Sweden
10 shared publications - Majid Baghaei Nejad
Electrical Engineering Department, Telemetry Research Laboratory, Hakim Sabzevari University, Sabzevar, Iran
6 shared publications - Esa Tjukanoff
Department of Information Technology, University of Turku, Lemminkäisenkatu 14 A, FIN-20520, Turku, Finland
3 shared publications H. Tenhunen
Lab. of Electron. & Comput. Syst., R. Inst. of Technol., Stockholm, Sweden
3 shared publications- Jian Liu
Royal Institute of Technology, Stockholm, Sweden; Isafjordsgatan 39, 164 40 Stockholm, Sweden
3 shared publications - Meigen Shen
Royal Institute of Technology (KTH)
3 shared publications
Latest Publications
- 1 January 2013
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 10 (4) , 20130003
RFID antenna humidity sensor co-design for USN applications
We demonstrate for the first time an RFID tag antenna which itself is humidity sensor and also provides calibration functionality. The antenna is comprised of T-matching network and horizontally meandered lines for impedance matching and reliable near-field communication. The novel contour design provides humidity sensing, and calibration functions whilst concurrently acts as a radiating element along with quadrangular capacitive tip-loading with covered middle portion for far-field communication. The inkjet printed prototypes of the antenna provide effective ambient humidity sensing while demonstrating stable RFID communication. The antenna has a compact size of 1.1 × 10.2cm for 902-928MHz band.
- 1 January 2013
- Published by Institute of Electronics, Information and Communications Engineers (IEICE) in IEICE Electronics Express
- Vol. 10 (4) , 20130003
RFID antenna humidity sensor co-design for USN applications
We demonstrate for the first time an RFID tag antenna which itself is humidity sensor and also provides calibration functionality. The antenna is comprised of T-matching network and horizontally meandered lines for impedance matching and reliable near-field communication. The novel contour design provides humidity sensing, and calibration functions whilst concurrently acts as a radiating element along with quadrangular capacitive tip-loading with covered middle portion for far-field communication. The inkjet printed prototypes of the antenna provide effective ambient humidity sensing while demonstrating stable RFID communication. The antenna has a compact size of 1.1 × 10.2cm for 902-928MHz band.
- Open Access
- 1 January 2012
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research
- Vol. 130, 241-256
DESIGN AND FABRICATION OF WIDEBAND ARCHIMEDEAN SPIRAL ANTENNA BASED ULTRA-LOW COST ``GREEN'' MODULES FOR RFID SENSING AND WIRELESS APPLICATIONS
- 1 January 2012
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research
- Vol. 130, 241-256
Open AccessDESIGN AND FABRICATION OF WIDEBAND ARCHIMEDEAN SPIRAL ANTENNA BASED ULTRA-LOW COST ``GREEN'' MODULES FOR RFID SENSING AND WIRELESS APPLICATIONS
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 1593-1596
A Novel Passive Tag with Asymmetric Wireless Link for RFID and WSN Applications
In this paper, we present a radio-powered module with asymmetric wireless link utilizing ultra wideband radio system for RFID and wireless sensor applications. Our contribution includes using two different standards in uplink and downlink. Such as conventional RFIDs, incoming RF signal transmitted by reader is used to power the internal circuitry and receive the data. However, in upstream link, an IR-UWB transmitter is utilized. Unlike traditional RFID systems, due to great advantages of UWB communication, this tag is very robust to multi-path fading and collision problem and it is more secure against eavesdropping or jamming. The module consists of a power scavenging unit, a RF receiver, an IR-UWB transmitter, digital baseband controller, and an embedded UWB antenna are designed for integration on liquid-crystal polymer (LCP) substrate, using 0.18mum CMOS process technology.
- 1 May 2007
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 02714302,p. 1593-1596
A Novel Passive Tag with Asymmetric Wireless Link for RFID and WSN Applications
In this paper, we present a radio-powered module with asymmetric wireless link utilizing ultra wideband radio system for RFID and wireless sensor applications. Our contribution includes using two different standards in uplink and downlink. Such as conventional RFIDs, incoming RF signal transmitted by reader is used to power the internal circuitry and receive the data. However, in upstream link, an IR-UWB transmitter is utilized. Unlike traditional RFID systems, due to great advantages of UWB communication, this tag is very robust to multi-path fading and collision problem and it is more secure against eavesdropping or jamming. The module consists of a power scavenging unit, a RF receiver, an IR-UWB transmitter, digital baseband controller, and an embedded UWB antenna are designed for integration on liquid-crystal polymer (LCP) substrate, using 0.18mum CMOS process technology.
- 1 January 2007
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 50 (1) , 47-57
UWB radio module design for wireless sensor networks
- 1 January 2007
- Published by Springer Nature in Analog Integrated Circuits and Signal Processing
- Vol. 50 (1) , 47-57
UWB radio module design for wireless sensor networks
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 291-298
Chip-Package and Antenna Co-Design of a Tunable UWB Transmitter in System-on-Package with On-Chip versus Off-Chip Passives
In this paper we present a self-powered CMOS ultra wideband radio transmitter integrated in a liquid-crystal polymer (LCP) based system on package (SoP) module with an embedded small antenna. Chip-package-antenna co-design is performed for this module in the presence of unwanted packaging parasitic effects and optimizes the transmission efficiency. Our contribution includes new modeling of the RF-package and antenna and co-optimizing the chip and package design with on-chip versus off-chip passives trade-offs. The SoP module consists of an innovative tunable low power CMOS transmitter for IR-UWB communication, a double-slotted small-size embedded UWB antenna, and a power converter. The output amplitude and duration of the transmitter can be tuned to transmit a signal meeting the FCC mask in different pulse repetition rate for long and short range applications. This ability can also be used to compensate the process and temperature variations as well as the parasitic effects of packaging and antenna. The antenna has a return loss of better than -10dB. The power converter consists of a chain of surface mounted Schottky diodes and capacitors, which converts incident electromagnetic waves to DC supply and thus power up the transmitter. The final module is implemented in LCP substrate with integrated passive components and embedded antenna. The chip part is implemented in 0.18mum CMOS process
- 1 September 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 291-298
Chip-Package and Antenna Co-Design of a Tunable UWB Transmitter in System-on-Package with On-Chip versus Off-Chip Passives
In this paper we present a self-powered CMOS ultra wideband radio transmitter integrated in a liquid-crystal polymer (LCP) based system on package (SoP) module with an embedded small antenna. Chip-package-antenna co-design is performed for this module in the presence of unwanted packaging parasitic effects and optimizes the transmission efficiency. Our contribution includes new modeling of the RF-package and antenna and co-optimizing the chip and package design with on-chip versus off-chip passives trade-offs. The SoP module consists of an innovative tunable low power CMOS transmitter for IR-UWB communication, a double-slotted small-size embedded UWB antenna, and a power converter. The output amplitude and duration of the transmitter can be tuned to transmit a signal meeting the FCC mask in different pulse repetition rate for long and short range applications. This ability can also be used to compensate the process and temperature variations as well as the parasitic effects of packaging and antenna. The antenna has a return loss of better than -10dB. The power converter consists of a chain of surface mounted Schottky diodes and capacitors, which converts incident electromagnetic waves to DC supply and thus power up the transmitter. The final module is implemented in LCP substrate with integrated passive components and embedded antenna. The chip part is implemented in 0.18mum CMOS process
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21647011,p. 310-315
An Innovative Semi-UWB Passive Transponder for Wireless Sensor and RFID Applications
In this paper, we present a self-powered CMOS impulse-based ultra wideband radio system for RFIDs and wireless sensor networks (WSN) applications. It is integrated in a liquid-crystal polymer (LCP) based system on package (SoP) module with an embedded small antenna. Our contribution includes using two different standards in up and downstream link. In downstream link, due to demand of low complex, low cost and low power circuit, a very simple and extremely low power pulse width demodulator is used to extract the data from received RF signal. An IR-UWB transmitter is used to transmit the data in upstream link. Power supply is taken from the received RF electromagnetic wave with help of a Schottky diode voltage multiplier. Unlike traditional wireless systems, due to great advantages of UWB communication this transponder does not suffer from multi-path fading, collision problem and multi-user interference. The front-end circuit consists of the power converter; PWM receiver, IR-UWB transmitter, and embedded UWB antenna are designed for integration on liquid-crystal polymer (LCP) substrate
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21647011,p. 310-315
An Innovative Semi-UWB Passive Transponder for Wireless Sensor and RFID Applications
In this paper, we present a self-powered CMOS impulse-based ultra wideband radio system for RFIDs and wireless sensor networks (WSN) applications. It is integrated in a liquid-crystal polymer (LCP) based system on package (SoP) module with an embedded small antenna. Our contribution includes using two different standards in up and downstream link. In downstream link, due to demand of low complex, low cost and low power circuit, a very simple and extremely low power pulse width demodulator is used to extract the data from received RF signal. An IR-UWB transmitter is used to transmit the data in upstream link. Power supply is taken from the received RF electromagnetic wave with help of a Schottky diode voltage multiplier. Unlike traditional wireless systems, due to great advantages of UWB communication this transponder does not suffer from multi-path fading, collision problem and multi-user interference. The front-end circuit consists of the power converter; PWM receiver, IR-UWB transmitter, and embedded UWB antenna are designed for integration on liquid-crystal polymer (LCP) substrate
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21647011,p. 393-395
Design and Implementation of a High Efficient Power Converter for Self-Powered UHF RFID Applications
This paper is an investigation of off-chip solution of power converters for passive UHF RFID transponders. The power converter, consisting of a chain of schottky diodes and capacitors, is designed and then implemented on Rogers4350 PCB substrate. The ISM unlicensed frequency bands 915 MHz is used for RF signal. The measurement results show that with minimum input power of -4.7 dBm, the power converter achieves 1.8 V/5 muA output driving capability, which is sufficient for the transponder operation. It corresponds to a 3.6 m operating distance when 4-W EIRP radiation is allowed
- 1 August 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 21647011,p. 393-395
Design and Implementation of a High Efficient Power Converter for Self-Powered UHF RFID Applications
This paper is an investigation of off-chip solution of power converters for passive UHF RFID transponders. The power converter, consisting of a chain of schottky diodes and capacitors, is designed and then implemented on Rogers4350 PCB substrate. The ISM unlicensed frequency bands 915 MHz is used for RF signal. The measurement results show that with minimum input power of -4.7 dBm, the power converter achieves 1.8 V/5 muA output driving capability, which is sufficient for the transponder operation. It corresponds to a 3.6 m operating distance when 4-W EIRP radiation is allowed
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 221-232
On-Chip versus Off-Chip Passives in Radio and Mixed-Signal System-on-Package Design
Optimal total solution for new radio architecture and implementation requires accurate trade-offs for off-chip versus off-chip passives. In this paper, a complete and systematic design methodology for RF blocks in SoP (system-on-package) versus SoC (system-on-chip) is presented. This methodology explores trade-offs between performance and cost when different on-chip or off-chip passives are used. For a better presentation, the method and design techniques are demonstrated through four multi-band/multi-standard radio design examples with various technologies and different circuit topologies. Our study reveals that, in order to obtain cost benefits in RF-SoPs, small RF chips should be merged as larger chips and the integration density of each RF chip should be high enough. Our study also indicates that in a complex chip like a multi-band radio, moving passives off chip could achieve further cost savings and significant performance improvements. These are general conclusions but, our method offers a detailed analysis which can give quantitative measurements of cost savings and performance improvements in off-chip versus off-chip passives in RF SoP design
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 221-232
On-Chip versus Off-Chip Passives in Radio and Mixed-Signal System-on-Package Design
Optimal total solution for new radio architecture and implementation requires accurate trade-offs for off-chip versus off-chip passives. In this paper, a complete and systematic design methodology for RF blocks in SoP (system-on-package) versus SoC (system-on-chip) is presented. This methodology explores trade-offs between performance and cost when different on-chip or off-chip passives are used. For a better presentation, the method and design techniques are demonstrated through four multi-band/multi-standard radio design examples with various technologies and different circuit topologies. Our study reveals that, in order to obtain cost benefits in RF-SoPs, small RF chips should be merged as larger chips and the integration density of each RF chip should be high enough. Our study also indicates that in a complex chip like a multi-band radio, moving passives off chip could achieve further cost savings and significant performance improvements. These are general conclusions but, our method offers a detailed analysis which can give quantitative measurements of cost savings and performance improvements in off-chip versus off-chip passives in RF SoP design
- 1 June 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
UWB Radio Module Design for Wireless Intelligent Systems-From Specification to Implementation
In this paper, we designed an impulse-based ultra wideband (UWB) radio module (low band) for wireless intelligent system applications such as radio frequency identification (RFID) and wireless sensor networks (WSN). The UWB radio module includes transceiver block, baseband process unit and power management block. The transceiver circuits include Gaussian pulse generator, wideband low noise amplifier (LNA), multiplier, integrator and timing circuits, which use 0.18mum, 1P6M CMOS technology. The wideband LNA has a power gain of 10dB and minimum noise figure of 2.7dB. For UWB transceiver, the power consumption of transmitter is lower than 1mW while the receiver is about 23mW. The liquid-crystal-polymer (LCP)-based system-on-package (SoP) technology is used to implement the UWB radio module for low power, low cost and small size
- 1 June 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
UWB Radio Module Design for Wireless Intelligent Systems-From Specification to Implementation
In this paper, we designed an impulse-based ultra wideband (UWB) radio module (low band) for wireless intelligent system applications such as radio frequency identification (RFID) and wireless sensor networks (WSN). The UWB radio module includes transceiver block, baseband process unit and power management block. The transceiver circuits include Gaussian pulse generator, wideband low noise amplifier (LNA), multiplier, integrator and timing circuits, which use 0.18mum, 1P6M CMOS technology. The wideband LNA has a power gain of 10dB and minimum noise figure of 2.7dB. For UWB transceiver, the power consumption of transmitter is lower than 1mW while the receiver is about 23mW. The liquid-crystal-polymer (LCP)-based system-on-package (SoP) technology is used to implement the UWB radio module for low power, low cost and small size
- 1 June 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Switch Design and Implementation for Network-on-Chip
When network on chip (NoC) is being developed in recent years, new challenges are accruing since a large number of heterogeneous cores are integrated on a single silicon die. On-chip switching networks seem to be one scalable global interconnection solution for SoC. Packet switching is becoming predominant in today's NoC, the main advantage is that it supports many cores communicating simultaneously without dedicated data paths. Disadvantages are also obvious, packets may get lost in transmission since there are no predictable paths between cores. It takes extra time to reorder packets after they arrive at destination. Therefore, packet switching is not used for the multicast-supporting (MS) and guaranteed-throughput (GT) switching networks that require restricted latency and reliable data transmission. Time-space-time (TST) switch - designed for circuit switching networks using time division multiplexing (TDM) scheme is used in our MS & GT switching network. With this architecture, data can be efficiently transmitted in restricted channels and arrive after a constant latency. In the multimessage multicasting TST switch supporting messages with one sender and multiple receivers, each input buffer has only one read port, meaning that only one memory location can be accessed each clock cycle. To make the read/write operations parallel and hence reduce the demand on read/write bandwidth, scheduling is required. The switch employs an approximation algorithm for multimessage multicasting since scheduling of multicast communication is an NP-hard problem. With an approximation bound of qd + f 1 q/ (d - 1) for fan-out f ges 3, the throughput increases when the data width grows. The main design objective is to develop a switch with very small area and delay, enabling its immediate practical use
- 1 June 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
Switch Design and Implementation for Network-on-Chip
When network on chip (NoC) is being developed in recent years, new challenges are accruing since a large number of heterogeneous cores are integrated on a single silicon die. On-chip switching networks seem to be one scalable global interconnection solution for SoC. Packet switching is becoming predominant in today's NoC, the main advantage is that it supports many cores communicating simultaneously without dedicated data paths. Disadvantages are also obvious, packets may get lost in transmission since there are no predictable paths between cores. It takes extra time to reorder packets after they arrive at destination. Therefore, packet switching is not used for the multicast-supporting (MS) and guaranteed-throughput (GT) switching networks that require restricted latency and reliable data transmission. Time-space-time (TST) switch - designed for circuit switching networks using time division multiplexing (TDM) scheme is used in our MS & GT switching network. With this architecture, data can be efficiently transmitted in restricted channels and arrive after a constant latency. In the multimessage multicasting TST switch supporting messages with one sender and multiple receivers, each input buffer has only one read port, meaning that only one memory location can be accessed each clock cycle. To make the read/write operations parallel and hence reduce the demand on read/write bandwidth, scheduling is required. The switch employs an approximation algorithm for multimessage multicasting since scheduling of multicast communication is an NP-hard problem. With an approximation bound of qd + f 1 q/ (d - 1) for fan-out f ges 3, the throughput increases when the data width grows. The main design objective is to develop a switch with very small area and delay, enabling its immediate practical use