Christophe Salzmann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Christophe Salzmann has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Denis Gillet
École Polytechnique Fédérale de Lausanne (EPFL)
9 shared publications Denis Gillet
Ecole Polytechnique Federale De Lausanne, EPFL
2 shared publications- Héctor Vargas
Dept. Of Computer Science and Automatic Control UNED, C/ Juan del Rosal 16 28040 Madrid, Spain
2 shared publications - Sebastiaán Dormido
Universidad Nacional de Educación a Distancia
2 shared publications - Wissam Halimi
EPFL
2 shared publications - Yves Piguet
École Polytechnique Fédérale de Lausanne
2 shared publications
Latest Publications
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (3) , 1419-1434
Disturbance-Adaptive Data-Driven Predictive Control: Trading Comfort Violation for Savings in Building Climate Control
Model predictive control (MPC) has demonstrated significant potential in improving energy efficiency in building climate control, outperforming traditional controllers commonly used in modern building management systems (BMSs). Among MPC variants, data-driven predictive control (DPC) offers the advantage of modeling building dynamics directly from data, thereby substantially reducing commissioning efforts. However, inevitable model uncertainties and measurement noise can result in comfort violations, even with dedicated MPC setups. This article introduces a disturbance-adaptive DPC (DAD-DPC) framework that ensures asymptotic satisfaction of predefined violation bounds without knowing the uncertainty and noise distributions. The framework employs a data-driven pipeline based on Willems’ Fundamental Lemma and conformal prediction for application in building climate control. The proposed DAD-DPC framework was validated through four building cases using the high-fidelity building optimization testing framework (BOPTEST) simulation platform and an occupied campus building, Polydome. DAD-DPC successfully regulated the average comfort violations to meet predefined bounds. Notably, the 5% violation DAD-DPC setup achieved 30.1%/11.2%/27.1%/20.5% energy savings compared to default controllers across four cases. These results demonstrate the framework’s effectiveness in balancing energy consumption and comfort violations, offering a practical solution for building climate control applications.
- 23 February 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 34 (3) , 1419-1434
Disturbance-Adaptive Data-Driven Predictive Control: Trading Comfort Violation for Savings in Building Climate Control
Model predictive control (MPC) has demonstrated significant potential in improving energy efficiency in building climate control, outperforming traditional controllers commonly used in modern building management systems (BMSs). Among MPC variants, data-driven predictive control (DPC) offers the advantage of modeling building dynamics directly from data, thereby substantially reducing commissioning efforts. However, inevitable model uncertainties and measurement noise can result in comfort violations, even with dedicated MPC setups. This article introduces a disturbance-adaptive DPC (DAD-DPC) framework that ensures asymptotic satisfaction of predefined violation bounds without knowing the uncertainty and noise distributions. The framework employs a data-driven pipeline based on Willems’ Fundamental Lemma and conformal prediction for application in building climate control. The proposed DAD-DPC framework was validated through four building cases using the high-fidelity building optimization testing framework (BOPTEST) simulation platform and an occupied campus building, Polydome. DAD-DPC successfully regulated the average comfort violations to meet predefined bounds. Notably, the 5% violation DAD-DPC setup achieved 30.1%/11.2%/27.1%/20.5% energy savings compared to default controllers across four cases. These results demonstrate the framework’s effectiveness in balancing energy consumption and comfort violations, offering a practical solution for building climate control applications.
- 20 September 2021
- Published by Springer Nature
- p. 66-77
Interactive Lab Experimentation and Simulation Tools for Remote Laboratories
- 20 September 2021
- Published by Springer Nature
- p. 66-77
Interactive Lab Experimentation and Simulation Tools for Remote Laboratories
- 10 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Learning Technologies
- Vol. 13 (2) , 404-416
Self-Organized Laboratories for Smart Campus
A smart campus provides students who are geographically scattered with online tools to get access to learning resources and laboratories. Although these remote laboratories have the potential and capabilities to implement different learning experiments, most of them are configured in a static fashion, being able to serve only one experiment for a given period of time. This lack of adaptability and flexibility causes long waiting queues of students in certain overloaded remote laboratories, while others are underused. To overcome this limitation, a smart campus can incorporate new techniques and paradigms such as Network function virtualization (NFV) and Software-defined networking (SDN), which are rapidly modifying current cloud services and applications to provide autonomous and adaptive solutions. In this \change{sense}{context}, the main contribution of this paper is an SDN/NFV-based architecture with autonomic capabilities to adapt to the remote laboratories configuration according to the end-user demand. The proposed architecture will be able to optimize computing resources to ensure the users' quality of service in a smart campus with remote laboratories. A use case with a remote laboratory, based on the control of a servo motor, shows how our solution can dynamically change the lab service under specific circumstances. Finally, experiments using diverse configurations and service descriptions show the performance and suitability of the proposal.
- 10 September 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Learning Technologies
- Vol. 13 (2) , 404-416
Self-Organized Laboratories for Smart Campus
A smart campus provides students who are geographically scattered with online tools to get access to learning resources and laboratories. Although these remote laboratories have the potential and capabilities to implement different learning experiments, most of them are configured in a static fashion, being able to serve only one experiment for a given period of time. This lack of adaptability and flexibility causes long waiting queues of students in certain overloaded remote laboratories, while others are underused. To overcome this limitation, a smart campus can incorporate new techniques and paradigms such as Network function virtualization (NFV) and Software-defined networking (SDN), which are rapidly modifying current cloud services and applications to provide autonomous and adaptive solutions. In this \change{sense}{context}, the main contribution of this paper is an SDN/NFV-based architecture with autonomic capabilities to adapt to the remote laboratories configuration according to the end-user demand. The proposed architecture will be able to optimize computing resources to ensure the users' quality of service in a smart campus with remote laboratories. A use case with a remote laboratory, based on the control of a servo motor, shows how our solution can dynamically change the lab service under specific circumstances. Finally, experiments using diverse configurations and service descriptions show the performance and suitability of the proposal.
- 27 April 2018
- Published by Springer Nature
- p. 43-78
Deploying Large-Scale Online Labs with Smart Devices
- 27 April 2018
- Published by Springer Nature
- p. 43-78
Deploying Large-Scale Online Labs with Smart Devices
- 10 February 2018
- Published by Springer Nature
- p. 617-627
An Activity Tracking Infrastructure for Embedded Open Educational Labs Supporting the Needs of Lab Owners and Students
- 10 February 2018
- Published by Springer Nature
- p. 617-627
An Activity Tracking Infrastructure for Embedded Open Educational Labs Supporting the Needs of Lab Owners and Students
- Open Access
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 246-251
MOOLs for MOOCs: A first edX scalable implementation
Deploying remote laboratories at a large scale is the next challenge in remote experimentation. It is referred as Massive Open Online Labs (MOOLs). Being able to sustain a massive number of users accessing a specific resource concurrently is a complex task. This paper presents technical solutions, currently deployed, to implement such a remote lab in a MOOC. The control system lab deployed in edX, where more that 200 students access concurrently a farm of 20 electrical drives, is used as an example. Gamification mechanisms which accommodate even more students are proposed.
- 1 February 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 246-251
Open AccessMOOLs for MOOCs: A first edX scalable implementation
Deploying remote laboratories at a large scale is the next challenge in remote experimentation. It is referred as Massive Open Online Labs (MOOLs). Being able to sustain a massive number of users accessing a specific resource concurrently is a complex task. This paper presents technical solutions, currently deployed, to implement such a remote lab in a MOOC. The control system lab deployed in edX, where more that 200 students access concurrently a farm of 20 electrical drives, is used as an example. Gamification mechanisms which accommodate even more students are proposed.
- Open Access
- 5 August 2015
- Published by International Association of Online Engineering (IAOE) in International Journal of Online and Biomedical Engineering (iJOE)
- Vol. 11 (4) , 20-29
The Smart Device Specification for Remote Labs
This paper presents the Smart Device specification to interface with remote labs. To encourage the broader sharing of remote labs, the Smart Device paradigm decouples the client from the server and provides well-defined interfaces between client and server. Such Smart Device services are exposed on the Internet and enable interoperability with client applications, other Smart Devices and external services (e.g. a booking service). This paper presents the extensible and platform-agnostic specification of the Smart Device services and internal functionalities. The Smart Device specification contains sufficient service metadata to enable the automatic generation of basic client applications. The specification is illustrated through an example and first implementations of the specification are presented.
- 5 August 2015
- Published by International Association of Online Engineering (IAOE) in International Journal of Online and Biomedical Engineering (iJOE)
- Vol. 11 (4) , 20-29
Open AccessThe Smart Device Specification for Remote Labs
This paper presents the Smart Device specification to interface with remote labs. To encourage the broader sharing of remote labs, the Smart Device paradigm decouples the client from the server and provides well-defined interfaces between client and server. Such Smart Device services are exposed on the Internet and enable interoperability with client applications, other Smart Devices and external services (e.g. a booking service). This paper presents the extensible and platform-agnostic specification of the Smart Device services and internal functionalities. The Smart Device specification contains sufficient service metadata to enable the automatic generation of basic client applications. The specification is illustrated through an example and first implementations of the specification are presented.
- 1 January 2010
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (24) , 186-191
Remote Experimentation Mashup
- 1 January 2010
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 42 (24) , 186-191
Remote Experimentation Mashup
- 17 April 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Computing in Science & Engineering
- Vol. 11 (3) , 36-46
Web-Enabled Remote Scientific Environments
A new approach to developing Web-enabled environments for remote diagnostics, maintenance, and experimentation in engineering is based on a middleware layer that uses a Java-lntemet-Labview server to provide communication between Java programs and Labview virtual instruments. The authors illustrate their technique by applying it to the development of a complete Web-enabled application for remote control of a thermal process.
- 17 April 2009
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Computing in Science & Engineering
- Vol. 11 (3) , 36-46
Web-Enabled Remote Scientific Environments
A new approach to developing Web-enabled environments for remote diagnostics, maintenance, and experimentation in engineering is based on a middleware layer that uses a Java-lntemet-Labview server to provide communication between Java programs and Labview virtual instruments. The authors illustrate their technique by applying it to the development of a complete Web-enabled application for remote control of a thermal process.
- Open Access
- 15 July 2008
- Published by International Association of Online Engineering (IAOE) in International Journal of Online and Biomedical Engineering (iJOE)
- Vol. 4, 50-54
From online experiments to smart devices
Online experiments have been available for more than a decade. The integration of online experiments into collaborative environments is more recent. The wealth of client applications/environments, the versatility of possible interaction protocols/technologies and the needs for more autonomous actions impel the evolution of online experiments to the smart device concept. This paper reviews the evolution of an electrical drive experiment and presents the requirements for turning online experiments into smart devices.
- 15 July 2008
- Published by International Association of Online Engineering (IAOE) in International Journal of Online and Biomedical Engineering (iJOE)
- Vol. 4, 50-54
Open AccessFrom online experiments to smart devices
Online experiments have been available for more than a decade. The integration of online experiments into collaborative environments is more recent. The wealth of client applications/environments, the versatility of possible interaction protocols/technologies and the needs for more autonomous actions impel the evolution of online experiments to the smart device concept. This paper reviews the evolution of an electrical drive experiment and presents the requirements for turning online experiments into smart devices.