CBCees Bil

Cees Bil

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Cees Bil has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Application of hybrid-temporal LES to shock-induced boundary layer separation in hyperloop flows

    by Benedikt Geiben, Marc Havermann, Errol Hale, Cees Bil

    The development of evacuated tube trains (ETT), generally referred to as Hyperloop, has gained significant attention in recent years, offering the potential for high-speed and energy-efficient transportation. Achieving sustainability in high-speed modes of transport requires aerodynamic drag optimisation in order to minimise energy consumption. One of the major challenges in ETTs is the choking of the flow around the pod, which occurs depending on operating conditions defined by the Mach number $$M_\infty$$ and blockage ratio $$\textit{BR}$$ , defined as the ratio between cross-sectional pod and tube area. As soon as the choking limit is surpassed, the resulting shock wave at the rear of the pod interacts with the boundary layer, producing a complex flow field behind the pod. The exact type of interaction and corresponding drag working mechanism is highly sensitive to the operating conditions ( $$M_\infty$$ , $$\textit{BR}$$ ) with multiple distinct flow regimes recognised in the current literature. The complex nature of the shock-wave boundary layer interactions (SWBLI), the high sensitivity to operating conditions around the choking limit and a moving-wall boundary, leaves common Reynolds-averaged Navier–Stokes (RANS) CFD methods with significant challenges in accurately predicting flow characteristics. As much of the early research and development relies on CFD, both computationally affordable and sufficiently reliable results are essential. In this paper, we assess the feasibility of a hybrid RANS-LES approach in form of the Hybrid-Temporal large eddy simulation (HTLES) method, implemented in STAR-CCM+ as Scale Resolving Hybrid (SRH), for drag and separation location prediction in the case of shock-induced boundary layer separation (SIBLS). We find good numerical stability and reasonable computational requirements for improved spatial and temporal resolution and subsequently improved spectral representation in configurations where SIBLS dominates the rear flow and wake of the pod. Comparisons are conducted with respect to Menter’s RANS k- $$\omega$$ SST turbulence model, with results based on previous research by the authors.


  • Open Access

    Accurate EDM Calibration of a Digital Twin for a Seven-Axis Robotic EDM System and 3D Offline Cutting Path

    by Sergio Tadeu de Almeida, John P. T. Mo, Cees Bil, Songlin Ding, Chi-Tsun Cheng

    The increasing utilization of hard-to-cut materials in high-performance sectors such as aerospace and defense has pushed manufacturing systems to be flexible in processing large workpieces with a wide range of materials while also delivering high precision. Recent studies have highlighted the potential of integrating industrial robots (IRs) with electric discharge machining (EDM) to create a non-contact, low-force manufacturing platform, particularly suited for the accurate machining of hard-to-cut materials into complex and large-scale monolithic components. In response to this potential, a novel robotic EDM system has been developed. However, the manual programming and control of such a convoluted system present a significant challenge, often leading to inefficiencies and increased error rates, creating a scenario where the EDM process becomes unfeasible. To enhance the industrial applicability of this robotic EDM technology, this study focuses on a novel methodology to develop and validate a digital twin (DT) of the physical robotic EDM system. The digital twin functions as a virtual experimental environment for tool motion, effectively addressing the challenges posed by collisions and kinematic singularities inherent in the physical system, yet with proven 20-micron EDM gap accuracy. Furthermore, it facilitates a CNC-like, user-friendly offline programming framework for robotic EDM cutting path generation.


  • Open Access

    Application of Hybrid-Temporal LES to Shock-Induced Boundary Layer Separation in Hyperloop Flows

    by Benedikt Geiben, Marc Havermann, Errol Hale, Cees Bil

    The development of evacuated tube trains (ETT), generally referred to as Hyperloop, has gained significant attention in recent years, offering the potential for high-speed and energy-efficient transportation. Achieving sustainability in high-speed modes of transport requires aerodynamic drag optimisation in order to minimise energy consumption. One of the major challenges in ETTs is the choking of the flow around the pod, which occurs depending on operating conditions defined by the Mach number M∞ and blockage ratio BR, defined as the ratio between cross-sectional pod and tube area. As soon as the choking limit is surpassed, the resulting shock wave at the rear of the pod interacts with the boundary layer, producing a complex flow field behind the pod. The exact type of interaction and corresponding drag working mechanism is highly sensitive to the operating conditions (M∞, BR) with multiple distinct flow regimes recognised in the current literature. The complex nature of the shock-wave boundary layer interactions (SWBLI), the high sensitivity to operating conditions around the choking limit and a moving-wall boundary, leaves common Reynolds-averaged Navier-Stokes (RANS) CFD methods with significant challenges in accurately predicting flow characteristics. As much of the early research and development relies on CFD, both computationally affordable and sufficiently reliable results are essential. In this paper, we assess the feasibility of a hybrid RANS-LES approach in form of the Hybrid-Temporal large eddy simulation (HTLES) method, as implemented in STAR-CCM+ as Scale Resolving Hybrid (SRH), for drag and separation location prediction in the case of shock-induced boundary layer separation (SIBLS). We find good numerical stability and reasonable computational requirements for improved spatial and temporal resolution and subsequently improved spectral representation in configurations where SIBLS dominates the rear flow and wake of the pod. These hybrid RANS-LES methods are broadly applicable to a wide range of aeronautical applications, including transonic wing aerodynamics with physics similar to the presented case. Comparisons are conducted with respect to Menter's RANS k-ω SST turbulence model, with results based on previous research by the authors.

  • Open Access

    Energy-Efficient Path Planning for Commercial Aircraft Formation Flights

    by Olivia Curtis, Yibing Xie, Man Liang, Cees Bil

    The increasing global demand for air travel over the past three decades has led to heightened congestion, environmental concerns, and operational inefficiencies. This study explores the potential of commercial aircraft formation flight, inspired by the energy-saving flight patterns of migratory birds, to enhance fuel efficiency on the busy Melbourne to Sydney city-pair route. The methodology is divided into macroscopic and microscopic levels, addressing both strategic planning and detailed flight optimisation. The macroscopic level focuses on route optimisation, formation flight planning, air traffic management integration, and environmental impact. The microscopic level involves adjustments to individual aircraft flight profiles to ensure minimum separation, flight safety, and efficiency. Using a gradient-based optimisation algorithm applied to a constrained nonlinear multivariable function, this study aims to minimise fuel consumption and travel time while maintaining the required separation distances. The mathematical formulation and algorithm pseudocode provides a clear framework for implementation. The experimental results demonstrate the potential of formation flight to optimise fuel efficiency and resolve path conflicts on the Melbourne to Sydney route; despite a conservative 5% fuel efficiency improvement for the follower aircraft, the total fuel consumption decreased by 2.5–2.65% compared to the non-formation flight. These findings support the feasibility of applying formation flight principles to commercial aviation in Australia for improved fuel efficiency and operation performance of busy short-haul routes.


  • Impact of Geographical and Logistics Considerations on the Life Cycle Assessment of Launch Vehicles

    by Thomas Bellier, Cees Bil, Joseph Morlier, Annafederica Urbano, Adrian Pudsey

  • Open Access

    The Australian International Aerospace Congress AIAC 19/20

    by Adam Groszek, Ben Main, Cees Bil

  • Digitalization in Passengers’ Air Travel

    by Jiezhuoma La, Iryna Heiets, Cees Bil


  • Propeller Design and Optimisation for Bi-Modal Operations

    by Zhe Yang, Cees Bil, Piergiovanni Marzocca

    View Video Presentation: https://doi.org/10.2514/6.2022-3805.vid Abstract This paper investigates performance of a propeller geometry capable of operating in air and water for bi-modal UAS applications. A parametric propeller model was developed, and the performance analysed using ANSYS Fluent. The Potsdam Propeller Test Case was used as a benchmark for validation. Six different propeller geometries were simulated in air and water, and results of thrust, torque, as well as efficiency were analysed and compared. The results showed that a propeller with desired performance in both air and water can be selected. Analysis was also conducted on the existence of cavitation during underwater operations. Since the analysis was conducted for one given operating condition for air and water only, additional conditions and more variables will need to be considered to determine the best propeller geometry and power required to ensure optimal bi-modal UAS performance.

  • Open Access

    Bringing CT Scanners to the Skies: Design of a CT Scanner for an Air Mobile Stroke Unit

    by Jun Sheng Kwok, Kate Fox, Cees Bil, Francesca Langenberg, Anna H. Balabanski, Angela Dos Santos, Andrew Bivard, Fergus Gardiner, Christopher Bladin, Mark Parsons, et al.

    Stroke is the second most common cause of death and remains a persistent health challenge globally. Due to its highly time-sensitive nature, earlier stroke treatments should be enforced for improved patient outcome. The mobile stroke unit (MSU) was conceptualized and implemented to deliver the diagnosis and treatment to a stroke patient in the ultra-early time window (<1 h) in the pre-hospital setting and has shown to be clinically effective. However, due to geographical challenges, most rural communities are still unable to receive timely stroke intervention, as access to specialized stroke facilities for optimal stroke treatment poses a challenge. Therefore, the aircraft counterpart (Air-MSU) of the conventional road MSU offers a plausible solution to this shortcoming by expanding the catchment area for regional locations in Australia. The implementation of Air-MSU is currently hindered by several technical limitations, where current commercially available CT scanners are still oversized and too heavy to be integrated into a conventional helicopter emergency medical service (HEMS). In collaboration with the Australian Stroke Alliance and Melbourne Brain Centre, this article aims to explore the possibilities and methodologies in reducing the weight and, effectively, the size of an existing CT scanner, such that it can be retrofitted into the proposed search and rescue helicopter—Agusta Westland AW189. The result will be Australia’s first-ever customized CT scanner structure designed to fit in a search-and-rescue helicopter used for Air-MSU.