Janko Urbanc
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Janko Urbanc has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Nina Mali
Geological Survey of Slovenia, Dimičeva ulica 14, 1000 Ljubljana, Slovenia
4 shared publications - Ada Vengust
Geoinženiring D.O.O., Dimičeva ulica 14, 1000 Ljubljana, Slovenia
1 shared publication - Albrecht Leis
JR-AquaConSol, Steyrergasse 21, 8010 Graz, Austria
1 shared publication - Alenka Mauko Pranjić
Slovenian National Building and Civil Engineering Institute, Dimičeva ulica 12, 1000 Ljubljana, Slovenia
1 shared publication - Alenka Pavlin
Termit d.d.
1 shared publication Aleš Bizjak
1 shared publication
Latest Publications
- Open Access
Development of Groundwater Flow Models for the Integrated Management of the Alluvial Aquifer Systems of Dravsko polje and Ptujsko polje, Slovenia
With increasing exploitation of groundwater resources and implementation of various activities in their recharge areas, it is vital to conduct a comprehensive assessment of aquifers to ensure their conservation and sustainable management. In the present study, we used a comprehensive approach to conceptualise and identify the functioning of two connected aquifer systems in north-eastern Slovenia: the Quaternary porous aquifers Dravsko polje and Ptujsko polje. The study presents the conceptual models of both aquifers and their interconnectedness using separate mathematical-numerical models with the aim of ensuring an integrated management of these alluvial aquifer systems. It also highlights the importance of understanding connections between such systems for simulating groundwater flow and transport of different contaminants. To describe the entire aquifer system, the study defines its three essential elements: the geometry of the aquifers, their recharge by precipitation, and other boundary conditions. The geometry of the Quaternary aquifers was defined using Sequential Indicator Simulation (SIS) with the ESRI’s ArcMap software. Next, LIDAR was used for determining their surface geometry. The hydrogeologic model was designed using the Groundwater Modelling System (GMS) developed by AQUAVEO. We used the MODFLOW 2000 calculation method based on the finite difference method (FDM). The model was calibrated with the PEST module, which was used to calibrate hydraulic conductivity and hydraulic heads between the measured and modelled data. Finally, the model was validated using the Nash–Sutcliffe (NSE) efficiency coefficient. In addition, the model results estimated using the PEST tool were validated with the hydraulic conductivities determined at the pumping sites (pumping tests), each belonging to water protection zones that define the maximum travel time of the particles. This was performed using the MODPATH method. The paper also presents the possibility of modelling heterogeneous but interdependent aquifers in a groundwater body. Modelling the connection between the two aquifers, which are the most important ones in the region, is essential for a comprehensive management of the entire system of water resources. The models allow for a better understanding of groundwater flow in both aquifers. Moreover, their interconnectedness will be used for further studies in this field, as well as for integrated water management.
Open AccessDevelopment of Groundwater Flow Models for the Integrated Management of the Alluvial Aquifer Systems of Dravsko polje and Ptujsko polje, Slovenia
With increasing exploitation of groundwater resources and implementation of various activities in their recharge areas, it is vital to conduct a comprehensive assessment of aquifers to ensure their conservation and sustainable management. In the present study, we used a comprehensive approach to conceptualise and identify the functioning of two connected aquifer systems in north-eastern Slovenia: the Quaternary porous aquifers Dravsko polje and Ptujsko polje. The study presents the conceptual models of both aquifers and their interconnectedness using separate mathematical-numerical models with the aim of ensuring an integrated management of these alluvial aquifer systems. It also highlights the importance of understanding connections between such systems for simulating groundwater flow and transport of different contaminants. To describe the entire aquifer system, the study defines its three essential elements: the geometry of the aquifers, their recharge by precipitation, and other boundary conditions. The geometry of the Quaternary aquifers was defined using Sequential Indicator Simulation (SIS) with the ESRI’s ArcMap software. Next, LIDAR was used for determining their surface geometry. The hydrogeologic model was designed using the Groundwater Modelling System (GMS) developed by AQUAVEO. We used the MODFLOW 2000 calculation method based on the finite difference method (FDM). The model was calibrated with the PEST module, which was used to calibrate hydraulic conductivity and hydraulic heads between the measured and modelled data. Finally, the model was validated using the Nash–Sutcliffe (NSE) efficiency coefficient. In addition, the model results estimated using the PEST tool were validated with the hydraulic conductivities determined at the pumping sites (pumping tests), each belonging to water protection zones that define the maximum travel time of the particles. This was performed using the MODPATH method. The paper also presents the possibility of modelling heterogeneous but interdependent aquifers in a groundwater body. Modelling the connection between the two aquifers, which are the most important ones in the region, is essential for a comprehensive management of the entire system of water resources. The models allow for a better understanding of groundwater flow in both aquifers. Moreover, their interconnectedness will be used for further studies in this field, as well as for integrated water management.
- Open Access
- 21 January 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (3) , 2014
Environmental Acceptability of Geotechnical Composites from Recycled Materials: Comparative Study of Laboratory and Field Investigations
The environmental properties of three geotechnical composites made by recycling wastes were investigated on a laboratory scale and in the field with the use of lysimeters designated for the revitalization of degraded mining sites. Composites were prepared by combining the mine waste with paper-mill sludge and foundry sand (Composite 1), with digestate from municipal waste and paper ash (Composite 2), and with coal ash, foundry slag and waste incineration bottom ash (Composite 3). The results of laboratory leaching tests proved that Composites 1 and 3 are environmentally acceptable, according to the legislative limits, as the potentially hazardous substances were immobilized, while in Composite 2, the legislative limits were exceeded. In the field lysimeters, the lowest rate of leaching was determined for optimally compacted Composites 1 and 3, while for Composite 2 the leaching of Cu was high. This study proved that optimally installed Composites 1 and 3 are environmentally acceptable for use in construction as an alternative to virgin materials, for the revitalization of degraded mining sites or, along with Composite 2, for closure operations with landfills. In this way, locally available waste streams are valorised and channelized into a beneficial and sustainable recycling practice.
- 21 January 2023
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 20 (3) , 2014
Open AccessEnvironmental Acceptability of Geotechnical Composites from Recycled Materials: Comparative Study of Laboratory and Field Investigations
The environmental properties of three geotechnical composites made by recycling wastes were investigated on a laboratory scale and in the field with the use of lysimeters designated for the revitalization of degraded mining sites. Composites were prepared by combining the mine waste with paper-mill sludge and foundry sand (Composite 1), with digestate from municipal waste and paper ash (Composite 2), and with coal ash, foundry slag and waste incineration bottom ash (Composite 3). The results of laboratory leaching tests proved that Composites 1 and 3 are environmentally acceptable, according to the legislative limits, as the potentially hazardous substances were immobilized, while in Composite 2, the legislative limits were exceeded. In the field lysimeters, the lowest rate of leaching was determined for optimally compacted Composites 1 and 3, while for Composite 2 the leaching of Cu was high. This study proved that optimally installed Composites 1 and 3 are environmentally acceptable for use in construction as an alternative to virgin materials, for the revitalization of degraded mining sites or, along with Composite 2, for closure operations with landfills. In this way, locally available waste streams are valorised and channelized into a beneficial and sustainable recycling practice.
- Open Access
- 28 August 2018
- Published by MDPI AG in Geosciences
- Vol. 8 (9) , 321
Groundwater Characterization by Means of Conservative (δ18O and δ2H) and Non-Conservative (87Sr/86Sr) Isotopic Values: The Classical Karst Region Aquifer Case (Italy–Slovenia)
The study of the different hydrogeological compartments is a prerequisite for understanding and monitoring different fluxes, thereby evaluating the environmental changes in an ecosystem where anthropogenic disturbances are present in order to preserve the most vulnerable groundwaters from contamination and degradation. In many karst domains in the Mediterranean, areas groundwaters and surface waters are a single system, as a result of the features that facilitate the ingression of waters from surface to subsurface. This is also the case for the Classical Karst hydrostructure, which is a carbonate plateau that rises above the northern Adriatic Sea, shared between Italy and Slovenia. The main suppliers to the aquifer are the effective precipitations and the waters from three different rivers: Reka/Timavo, Soča/Isonzo and Vipava/Vipacco. Past and ongoing hydrogeological studies on the area have focused on the connections within the Classical Karst Region aquifer system through the analysis of water caves and springs hydrographs and chemographs. In this paper, the authors present new combined data from major ions, oxygen, hydrogen and strontium stable and radiogenic isotopes which have allowed a more complementary knowledge of the groundwater circulation, provenance and water-rock interactions. All the actions occurred in the framework of the European project HYDROKARST.
- 28 August 2018
- Published by MDPI AG in Geosciences
- Vol. 8 (9) , 321
Open AccessGroundwater Characterization by Means of Conservative (δ18O and δ2H) and Non-Conservative (87Sr/86Sr) Isotopic Values: The Classical Karst Region Aquifer Case (Italy–Slovenia)
The study of the different hydrogeological compartments is a prerequisite for understanding and monitoring different fluxes, thereby evaluating the environmental changes in an ecosystem where anthropogenic disturbances are present in order to preserve the most vulnerable groundwaters from contamination and degradation. In many karst domains in the Mediterranean, areas groundwaters and surface waters are a single system, as a result of the features that facilitate the ingression of waters from surface to subsurface. This is also the case for the Classical Karst hydrostructure, which is a carbonate plateau that rises above the northern Adriatic Sea, shared between Italy and Slovenia. The main suppliers to the aquifer are the effective precipitations and the waters from three different rivers: Reka/Timavo, Soča/Isonzo and Vipava/Vipacco. Past and ongoing hydrogeological studies on the area have focused on the connections within the Classical Karst Region aquifer system through the analysis of water caves and springs hydrographs and chemographs. In this paper, the authors present new combined data from major ions, oxygen, hydrogen and strontium stable and radiogenic isotopes which have allowed a more complementary knowledge of the groundwater circulation, provenance and water-rock interactions. All the actions occurred in the framework of the European project HYDROKARST.
- 1 January 2012
- Published by University of Ljubljana in Geodetski vestnik
- Vol. 56 (02)
Permanently protected agricultural land and the location of water sources suitable for irrigation
- 1 January 2012
- Published by University of Ljubljana in Geodetski vestnik
- Vol. 56 (02)
Permanently protected agricultural land and the location of water sources suitable for irrigation
- 25 February 2009
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 203 (1-4) , 291-303
Isotope Oxygen-18 as Natural Tracer of Water Movement in a Coarse Gravel Unsaturated Zone
- 25 February 2009
- Published by Springer Nature in Water, Air, & Soil Pollution
- Vol. 203 (1-4) , 291-303
Isotope Oxygen-18 as Natural Tracer of Water Movement in a Coarse Gravel Unsaturated Zone
- 8 August 2006
- Published by Springer Nature in Environmental Geology
- Vol. 51 (8) , 1401-1412
Tracing of water movement through the unsaturated zone of a coarse gravel aquifer by means of dye and deuterated water
- 8 August 2006
- Published by Springer Nature in Environmental Geology
- Vol. 51 (8) , 1401-1412
Tracing of water movement through the unsaturated zone of a coarse gravel aquifer by means of dye and deuterated water