Anil Mital
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Anil Mital has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Waldemar Karwowski
3 shared publicationsBahador Ghahramani
AT&T , 295 North Maple Avenue, Basking Ridge, NJ, 07920, USA
2 shared publicationsDonald E. Shrey
Department of Physical Medicine & Rehabilitation, University of Cincinnati Medical Centre, Ohio 45221, USA
2 shared publicationsA. Desai
University of Cincinnati
1 shared publicationA. Subramanian
Department of Industrial Engineering, University of Cincinnati, Cincinnati, Ohio 45221-0116, USA
1 shared publicationAnoop Desai
1 shared publication
Latest Publications
- 3 July 2017
- Published by Emerald Publishing in Journal of Manufacturing Technology Management
- Vol. 28 (6) , 749-771
An interactive system framework to enable design for disassembly
Purpose: The purpose of this paper is to present an interactive system to enable product design for disassembly and to offer robust and quick design solutions based on designers’ input. Design/methodology/approach: The system utilizes an interactive questionnaire to communicate with the designer. The questionnaire is in the form of binary questions (Yes/No) and design questions that would enable the system to learn the objectives of the design. Solutions are based on a CAD supported design platform. The efficiency of each design is calculated using disassembly time as the metric of measurement using motion-time measurement (MTM). The designer would be able to make an informed decision with respect to component functionality, ease of disassembly and disassembly time. The paper presents a detailed framework and structure of this system. Findings: The value of the system is corroborated by means of a case study of an actual product design. The system is structured to offer multiple solutions to a design problem so as to enable the designer to choose the option that best serves their needs. Originality/value: This novel interactive system would accept customers’ design preferences as input and offer multiple solutions in order to solve the design problem. Process time is directly calculated using the MTM system of measurement by converting design features into time measurement units. Disassembly time can then be easily converted into disassembly cost by using standard conversion rates. The value to designers is obvious.
- 3 July 2017
- Published by Emerald Publishing in Journal of Manufacturing Technology Management
- Vol. 28 (6) , 749-771
An interactive system framework to enable design for disassembly
Purpose: The purpose of this paper is to present an interactive system to enable product design for disassembly and to offer robust and quick design solutions based on designers’ input. Design/methodology/approach: The system utilizes an interactive questionnaire to communicate with the designer. The questionnaire is in the form of binary questions (Yes/No) and design questions that would enable the system to learn the objectives of the design. Solutions are based on a CAD supported design platform. The efficiency of each design is calculated using disassembly time as the metric of measurement using motion-time measurement (MTM). The designer would be able to make an informed decision with respect to component functionality, ease of disassembly and disassembly time. The paper presents a detailed framework and structure of this system. Findings: The value of the system is corroborated by means of a case study of an actual product design. The system is structured to offer multiple solutions to a design problem so as to enable the designer to choose the option that best serves their needs. Originality/value: This novel interactive system would accept customers’ design preferences as input and offer multiple solutions in order to solve the design problem. Process time is directly calculated using the MTM system of measurement by converting design features into time measurement units. Disassembly time can then be easily converted into disassembly cost by using standard conversion rates. The value to designers is obvious.
- 1 March 2006
- Published by Springer Nature in Journal of Occupational Rehabilitation
- Vol. 16 (1) , 120-152
Changing Trends in US Injury Profiles: Revisiting Non-Fatal Occupational Injury Statistics
- 1 March 2006
- Published by Springer Nature in Journal of Occupational Rehabilitation
- Vol. 16 (1) , 120-152
Changing Trends in US Injury Profiles: Revisiting Non-Fatal Occupational Injury Statistics
- 1 November 2004
- Published by Wolters Kluwer Health in Journal of Cardiopulmonary Rehabilitation
- Vol. 24 (6) , 365-373
Return to Work After a Coronary Event
- 1 November 2004
- Published by Wolters Kluwer Health in Journal of Cardiopulmonary Rehabilitation
- Vol. 24 (6) , 365-373
Return to Work After a Coronary Event
- 1 January 2000
- Published by Taylor & Francis in Disability and Rehabilitation
- Vol. 22 (13-14) , 621-626
Accelerating the return to work (RTW) chances of coronary heart disease (CHD) patients: part 2 - development and validation of a vocational rehabilitation programme
Purpose : This paper, part 2 of the two-part paper, reviews return-to-work outcomes among individuals with coronary heart disease, who participated in an experimental field study reported in part 1 of the two-part paper. Study results reflected specific job stressors associated with physical and mental demands among various job tasks. Trends suggest that personality characteristics commonly associated with 'type a' personalities and cardiac disease risk factors may also serve as positive forces that influence return-to-work activity. Methods/Results : Relatively high levels of job satisfaction were reported among most experimental subjects. Despite having high return-to-work expectations, these patients lacked specific strategies and resources to facilitate a concrete return to work action plan. Conclusion : The researchers conclude that it is essential for cardiac rehabilitation staff, when creating a return to work transition for their cardiac patients, to explore the physical and psychosocial dimensions of jobs, the receptivity of the employer, and the accommodations needed to promote a safe and timely return to work.
- 1 January 2000
- Published by Taylor & Francis in Disability and Rehabilitation
- Vol. 22 (13-14) , 621-626
Accelerating the return to work (RTW) chances of coronary heart disease (CHD) patients: part 2 - development and validation of a vocational rehabilitation programme
Purpose : This paper, part 2 of the two-part paper, reviews return-to-work outcomes among individuals with coronary heart disease, who participated in an experimental field study reported in part 1 of the two-part paper. Study results reflected specific job stressors associated with physical and mental demands among various job tasks. Trends suggest that personality characteristics commonly associated with 'type a' personalities and cardiac disease risk factors may also serve as positive forces that influence return-to-work activity. Methods/Results : Relatively high levels of job satisfaction were reported among most experimental subjects. Despite having high return-to-work expectations, these patients lacked specific strategies and resources to facilitate a concrete return to work action plan. Conclusion : The researchers conclude that it is essential for cardiac rehabilitation staff, when creating a return to work transition for their cardiac patients, to explore the physical and psychosocial dimensions of jobs, the receptivity of the employer, and the accommodations needed to promote a safe and timely return to work.
- 1 January 2000
- Published by Taylor & Francis in Disability and Rehabilitation
- Vol. 22 (13-14) , 604-620
Accelerating the return to work (RTW) chances of coronary heart disease (CHD) patients: part 1 - development and validation of a training programme
Purpose : Conventional phase II cardiac rehabilitation (CR) programmes have not resulted in an improvement in returning coronary heart disease (CHD) patients to work in over 35 years. This 4 year field-initiated research, sponsored by the National Institute on Disability and Rehabilitation Research, compares conventional CR programmes with a low-intensity CR programme that simulates elements of work (job-simulated CR programme) in terms of return to work (RTW) and physiological conditioning. The effect of training on physical capabilities of patients participating in the job-simulated CR programme was also of equal interest. Method : Thirty patients (15 bypass and 15 angioplasty; 15 males and 15 females) participated in a conventional CR programme (control group). The job-simulated CR programme included 15 male and 2 female bypass and angioplasty patients (experimental group). Patients in the control group underwent regular aerobic exercise training (treadmill and bicycle). Experimental group patients participated in a series of low-intensity exercises such as progressive time exercises, flexibility exercises, and dexterity exercises. Results : All patients participating in the low-intensity job-simulated CR programme returned to the same job they held at the onset of myocardial infarction (MI). In contrast, only 60% of the control group patients returned to work; at least one-third of these did not go back to the same job they held at the onset of MI. Patients in both groups achieved the same level of physiological conditioning. The physical functional capabilities of the experimental group patients improved significantly throughout training. Conclusion : The results of this field-study lead to the conclusion that a low-intensity phase II cardiac rehabilitation programme that simulates elements of work may be far superior to conventional endurance exercise-based cardiac rehabilitation programmes in terms of returning patients to work. Such a programme also strengthens patients, improving their physical capabilities, without compromising their physiological conditioning.
- 1 January 2000
- Published by Taylor & Francis in Disability and Rehabilitation
- Vol. 22 (13-14) , 604-620
Accelerating the return to work (RTW) chances of coronary heart disease (CHD) patients: part 1 - development and validation of a training programme
Purpose : Conventional phase II cardiac rehabilitation (CR) programmes have not resulted in an improvement in returning coronary heart disease (CHD) patients to work in over 35 years. This 4 year field-initiated research, sponsored by the National Institute on Disability and Rehabilitation Research, compares conventional CR programmes with a low-intensity CR programme that simulates elements of work (job-simulated CR programme) in terms of return to work (RTW) and physiological conditioning. The effect of training on physical capabilities of patients participating in the job-simulated CR programme was also of equal interest. Method : Thirty patients (15 bypass and 15 angioplasty; 15 males and 15 females) participated in a conventional CR programme (control group). The job-simulated CR programme included 15 male and 2 female bypass and angioplasty patients (experimental group). Patients in the control group underwent regular aerobic exercise training (treadmill and bicycle). Experimental group patients participated in a series of low-intensity exercises such as progressive time exercises, flexibility exercises, and dexterity exercises. Results : All patients participating in the low-intensity job-simulated CR programme returned to the same job they held at the onset of myocardial infarction (MI). In contrast, only 60% of the control group patients returned to work; at least one-third of these did not go back to the same job they held at the onset of MI. Patients in both groups achieved the same level of physiological conditioning. The physical functional capabilities of the experimental group patients improved significantly throughout training. Conclusion : The results of this field-study lead to the conclusion that a low-intensity phase II cardiac rehabilitation programme that simulates elements of work may be far superior to conventional endurance exercise-based cardiac rehabilitation programmes in terms of returning patients to work. Such a programme also strengthens patients, improving their physical capabilities, without compromising their physiological conditioning.
- 1 January 1999
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 12 (4) , 371-382
Cutting stock problem: A heuristic solution based on operators' intuitive strategies
The goal of the cutting stock operation is to minimize trim losses, and thus maximize the utilization of material by laying out the maximum possible number of parts on a sheet.In order to maximize the utilization of raw material, different parts, or a number of parts of the same type, are cut from the same sheet. Historically, the laying of parts on a sheet has been performed by humans. Since this job is very time-consuming, there is an increasing interest in automating this process. Automation requires the development of solutions that can be extended to a variety of parts. The success of mathematical programming techniques in generating optimal solutions, however, has been limited to rectangular parts. Therefore, in recent years a number of heuristic algorithms have been developed for laying out irregular (asymmetrical), regular (symmetrical) and mixed parts. However, the utilization obtained by such techniques is no higher, and in many cases is lower, than part layouts generated by human operators. This study focuses on extracting the human intuitive thought process involved in laying out parts on a sheet. The first experiment, conducted with four near-rectangular convex parts, investigated the feasibility of extracting the human intuitive thought process involved in laying out parts. The results indicated that it was possible to extract such strategies and formalize them. This prompted a second experiment to determine whether the previously extracted strategies could be generalized. In addition to convex parts, concave parts and their mix were also considered. The results indicated that it is possible to extract and generalize strategies that lead to higher utilization. The third experiment compared the utilization obtained from a mathematical algorithm with the utilization obtained in one of the combinations of the second experiment. The fourth experiment compared the utilization obtained from heuristic trained group and un-trained group. It was observed that heuristic trained group achieved higher utilization than un-trained group. The proposed heuristic can be used to train new operators for laying out parts on a sheet as well as automating the parts laying out process to maximize sheet utilization.
- 1 January 1999
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 12 (4) , 371-382
Cutting stock problem: A heuristic solution based on operators' intuitive strategies
The goal of the cutting stock operation is to minimize trim losses, and thus maximize the utilization of material by laying out the maximum possible number of parts on a sheet.In order to maximize the utilization of raw material, different parts, or a number of parts of the same type, are cut from the same sheet. Historically, the laying of parts on a sheet has been performed by humans. Since this job is very time-consuming, there is an increasing interest in automating this process. Automation requires the development of solutions that can be extended to a variety of parts. The success of mathematical programming techniques in generating optimal solutions, however, has been limited to rectangular parts. Therefore, in recent years a number of heuristic algorithms have been developed for laying out irregular (asymmetrical), regular (symmetrical) and mixed parts. However, the utilization obtained by such techniques is no higher, and in many cases is lower, than part layouts generated by human operators. This study focuses on extracting the human intuitive thought process involved in laying out parts on a sheet. The first experiment, conducted with four near-rectangular convex parts, investigated the feasibility of extracting the human intuitive thought process involved in laying out parts. The results indicated that it was possible to extract such strategies and formalize them. This prompted a second experiment to determine whether the previously extracted strategies could be generalized. In addition to convex parts, concave parts and their mix were also considered. The results indicated that it is possible to extract and generalize strategies that lead to higher utilization. The third experiment compared the utilization obtained from a mathematical algorithm with the utilization obtained in one of the combinations of the second experiment. The fourth experiment compared the utilization obtained from heuristic trained group and un-trained group. It was observed that heuristic trained group achieved higher utilization than un-trained group. The proposed heuristic can be used to train new operators for laying out parts on a sheet as well as automating the parts laying out process to maximize sheet utilization.
- 1 October 1994
- Published by Taylor & Francis in Ergonomics
- Vol. 37 (10) , 1591-1601
The injury profile of a large telecommunication company: a statistical summary
Overexertion injuries have been a major concern to occupational safety and health professionals for quite some time. Over the years, these injuries have continued to increase despite ergonomic interventions to control their frequency of occurrence. It has been speculated that this increase may be due primarily to enhanced awareness and better record-keeping. Many occupational safety and health professionals also presume that overexertion injuries and occupational illnesses are confined to heavy manufacturing industries. This paper reports occupational injury and illness data from a large telecommunication industry, collected over a 7-year period. Three observations were made from the statistical summary: (1) better record keeping may be a reason behind the reported increase in injuries; workday losses decline as a result of improved ergonomic and occupational health interventions; (2) serious injuries are not just limited to heavy manufacturing industries; and (3) reduction in workday losses may not translate in injury cost savings.
- 1 October 1994
- Published by Taylor & Francis in Ergonomics
- Vol. 37 (10) , 1591-1601
The injury profile of a large telecommunication company: a statistical summary
Overexertion injuries have been a major concern to occupational safety and health professionals for quite some time. Over the years, these injuries have continued to increase despite ergonomic interventions to control their frequency of occurrence. It has been speculated that this increase may be due primarily to enhanced awareness and better record-keeping. Many occupational safety and health professionals also presume that overexertion injuries and occupational illnesses are confined to heavy manufacturing industries. This paper reports occupational injury and illness data from a large telecommunication industry, collected over a 7-year period. Three observations were made from the statistical summary: (1) better record keeping may be a reason behind the reported increase in injuries; workday losses decline as a result of improved ergonomic and occupational health interventions; (2) serious injuries are not just limited to heavy manufacturing industries; and (3) reduction in workday losses may not translate in injury cost savings.
- 1 May 1993
- Published by Taylor & Francis in IIE Transactions
- Vol. 25 (3) , 99-104
LENGTH OF WORK-WEEK IN THE USA IN THE FUTURE
There is a growing concern in die labor sector to reduce stresses in the work place and the associated strains and adverse effects on health which result from newer forms of tasks that workers are increasingly called upon to perform. One approach to reducing stresses is to reduce the work-week (fewer hours per week). Social expectation of longer vacations and leisure time, demographic changes, and changes in the nature of die work and attitudes towards work also support this trend. The objective of this position paper is to consider the implication of such a move and the feasibility of this approach. Specifically, we consider the effects of a shorter work-week on productivity and economy and discuss the various patterns of shorter work-week. Finally, we present our position on die pattern of the shorter work-week in the United States in the future.
- 1 May 1993
- Published by Taylor & Francis in IIE Transactions
- Vol. 25 (3) , 99-104
LENGTH OF WORK-WEEK IN THE USA IN THE FUTURE
There is a growing concern in die labor sector to reduce stresses in the work place and the associated strains and adverse effects on health which result from newer forms of tasks that workers are increasingly called upon to perform. One approach to reducing stresses is to reduce the work-week (fewer hours per week). Social expectation of longer vacations and leisure time, demographic changes, and changes in the nature of die work and attitudes towards work also support this trend. The objective of this position paper is to consider the implication of such a move and the feasibility of this approach. Specifically, we consider the effects of a shorter work-week on productivity and economy and discuss the various patterns of shorter work-week. Finally, we present our position on die pattern of the shorter work-week in the United States in the future.