Philippe Thomas
Research Subjects
Research Interests
Philippe Thomas has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Marc Dubois
Université Clermont Auvergne, CNRS, ICCF
15 shared publications - Katia Guérin
Université Clermont Auvergne, CNRS, ICCF
13 shared publications A. Hamwi
10 shared publicationsDidier Blavette
10 shared publications- Ph Bilas
Groupe de Technologie des Surfaces et Interfaces (GTSI), EA 2432, Faculté des Sciences Exactes et Naturelles, Université des Antilles, 97159 Pointe-à-Pitre Cedex, France
10 shared publications - Nadiège Nomède-Martyr
Groupe de Technologie des Surfaces et Interfaces (GTSI), EA 2432, Faculté des Sciences Exactes et Naturelles, Université des Antilles, 97159 Pointe-à-Pitre Cedex, France
8 shared publications
Latest Publications
- Open Access
- 23 December 2025
- Published by MDPI AG in Lubricants
- Vol. 14 (1) , 6
Properties of Galba, Avocado and Moringa Oils in Lubricant Formulations
Due to growing environmental challenges, many studies are focusing on vegetable-based lubricants. Industrial lubricants pose a significant risk to the environment and human health. The tribological performances of calophyllum calaba (galba) and avocado when used as a base oil and as a liquid additive were compared to those of moringa oil. The different lubricant formulations were investigated under an ambient atmosphere, using a reciprocating ball-on-plane tribometer in a boundary lubrication regime. Graphite particles were used as solid lubricant additives due to their excellent friction performances in these formulations. Dodecane was the mineral oil used as a reference and base oil in some lubricant formulations. It was found that the percentage used and the fatty acid molecule composition of vegetable oils have an important influence on the tribological performances of the different formulations. The presence of oleic acid molecules shows a positive effect but is not sufficient to explain the friction reduction obtained with moringa oil. The triglyceride shape of an oleic acid molecule is the key to an important friction reduction, despite the small amount (2 wt% as liquid additive) in lubricant formulations.
- 23 December 2025
- Published by MDPI AG in Lubricants
- Vol. 14 (1) , 6
Open AccessProperties of Galba, Avocado and Moringa Oils in Lubricant Formulations
Due to growing environmental challenges, many studies are focusing on vegetable-based lubricants. Industrial lubricants pose a significant risk to the environment and human health. The tribological performances of calophyllum calaba (galba) and avocado when used as a base oil and as a liquid additive were compared to those of moringa oil. The different lubricant formulations were investigated under an ambient atmosphere, using a reciprocating ball-on-plane tribometer in a boundary lubrication regime. Graphite particles were used as solid lubricant additives due to their excellent friction performances in these formulations. Dodecane was the mineral oil used as a reference and base oil in some lubricant formulations. It was found that the percentage used and the fatty acid molecule composition of vegetable oils have an important influence on the tribological performances of the different formulations. The presence of oleic acid molecules shows a positive effect but is not sufficient to explain the friction reduction obtained with moringa oil. The triglyceride shape of an oleic acid molecule is the key to an important friction reduction, despite the small amount (2 wt% as liquid additive) in lubricant formulations.
- Open Access
Fluorination to Enhance the Tribological Properties of Carbonaceous Materials
This review compiles data from 77 articles on the tribological properties of fluorinated carbons CFx. Covalent grafting of fluorine atoms improves the tribological properties. The C-F bonding plays a key role in reducing friction. The tribological stability of CFx, along with their ability to form protective films from the very first cycles, provides a significant advantage in reducing wear and extending the lifespan of mechanical components. The role of the presence of fluorine atoms, their content, their distribution in the carbon lattice, and the C-F bonding, as well as the dimensionality and the size of the materials, are discussed. Some ways of improving lubrication performance and investigating friction-reducing properties and mechanisms are proposed.
Open AccessFluorination to Enhance the Tribological Properties of Carbonaceous Materials
This review compiles data from 77 articles on the tribological properties of fluorinated carbons CFx. Covalent grafting of fluorine atoms improves the tribological properties. The C-F bonding plays a key role in reducing friction. The tribological stability of CFx, along with their ability to form protective films from the very first cycles, provides a significant advantage in reducing wear and extending the lifespan of mechanical components. The role of the presence of fluorine atoms, their content, their distribution in the carbon lattice, and the C-F bonding, as well as the dimensionality and the size of the materials, are discussed. Some ways of improving lubrication performance and investigating friction-reducing properties and mechanisms are proposed.
- Open Access
Experimental Investigations of Friction Properties of Carbon Particles Derived from Sargassum Algae
In Caribbean islands, the washing ashore of tons of pelagic Sargassum spp., consisting of two species Sargassum fluitans and Sargassum natans, has been regularly occurring since 2011. As green lubrication is a growing trend in the tribology industry, biochar is a promising alternative. Sargassum biochars, produced from Sargassum pelagic algae, are therefore being studied as solid lubricants. This study aims to explore their potential applications. Biochars from brown algae were pyrolyzed at 400 °C and then annealed at different temperatures (from 600 °C to 1500 °C). The Raman spectra collected on the different biochars showed that there was a structural organization of the biochars as the temperature increased. The tribologic properties of the biochars were studied and compared to a solid lubricant reference (exfoliated graphite). Raman spectroscopy analysis revealed a progressive structural reorganization with increasing temperature, leading to a 58% reduction in the coefficient of friction. The morphology and the structure of the tribofilm are investigated by profilometry, scanning electron microscopy, and Raman microspectrometry. Overall, these results can be considered as a first step for utilizing the biochar derived from brown algae Sargassum sp. as an additive in the lubricant industry, for the purpose of emission reduction.
Open AccessExperimental Investigations of Friction Properties of Carbon Particles Derived from Sargassum Algae
In Caribbean islands, the washing ashore of tons of pelagic Sargassum spp., consisting of two species Sargassum fluitans and Sargassum natans, has been regularly occurring since 2011. As green lubrication is a growing trend in the tribology industry, biochar is a promising alternative. Sargassum biochars, produced from Sargassum pelagic algae, are therefore being studied as solid lubricants. This study aims to explore their potential applications. Biochars from brown algae were pyrolyzed at 400 °C and then annealed at different temperatures (from 600 °C to 1500 °C). The Raman spectra collected on the different biochars showed that there was a structural organization of the biochars as the temperature increased. The tribologic properties of the biochars were studied and compared to a solid lubricant reference (exfoliated graphite). Raman spectroscopy analysis revealed a progressive structural reorganization with increasing temperature, leading to a 58% reduction in the coefficient of friction. The morphology and the structure of the tribofilm are investigated by profilometry, scanning electron microscopy, and Raman microspectrometry. Overall, these results can be considered as a first step for utilizing the biochar derived from brown algae Sargassum sp. as an additive in the lubricant industry, for the purpose of emission reduction.
- Open Access
- 19 October 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (10) , 358
Moringa Oil and Carbon Phases of Different Shapes as Additives for Lubrication
Vegetable oils in the lubricant field are largely studied. Their efficiency depends on their viscosity parameters and their fatty acid composition. The actions of moringa oil used as a lubricant base and as a lubricant additive have been shown in this work. Graphite, carbon nanofibers, and carbon nanodots are carbon phases of different shapes used as solid additives. The tribological performances of lubricant blends composed of between 0.5 and 1 wt.% of particles have been evaluated using a ball-on-plane tribometer under an ambient atmosphere. No additional surfactant was used. The positive and important actions of a small amount of moringa oil added in the lubricant formulas are demonstrated. The results obtained allow us to point out the influence of the type and shape of particles. Physicochemical investigations allow us to propose a synergistic effect between the particles and moringa oil as additives in dodecane.
- 19 October 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (10) , 358
Open AccessMoringa Oil and Carbon Phases of Different Shapes as Additives for Lubrication
Vegetable oils in the lubricant field are largely studied. Their efficiency depends on their viscosity parameters and their fatty acid composition. The actions of moringa oil used as a lubricant base and as a lubricant additive have been shown in this work. Graphite, carbon nanofibers, and carbon nanodots are carbon phases of different shapes used as solid additives. The tribological performances of lubricant blends composed of between 0.5 and 1 wt.% of particles have been evaluated using a ball-on-plane tribometer under an ambient atmosphere. No additional surfactant was used. The positive and important actions of a small amount of moringa oil added in the lubricant formulas are demonstrated. The results obtained allow us to point out the influence of the type and shape of particles. Physicochemical investigations allow us to propose a synergistic effect between the particles and moringa oil as additives in dodecane.
- Open Access
- 31 August 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (9) , 308
Biomass-Derived Carbons as Friction Reducing Additives for Lubricants: Tribological Properties of Biochars and Activated Carbons Obtained from Sugar Cane Bagasse
Activated carbons are commonly used for adsorption/depollution applications, but only a few studies are related to their lubricating properties. In order to investigate a new family of friction reducers, the tribological properties of biochars and derived activated carbons obtained from sugar cane bagasse are investigated. Activated carbons are obtained from either a physical (steam water) or chemical (with phosphoric acid) activation process. The tribological tests show that the activated carbons present very low friction coefficients, close to 0.08. The correlation of textural and tribological investigations shows that the specific surface area of the compounds as well as the microporous and mesoporous domain extensions are key parameters to optimize the friction reduction properties of activated carbons. The friction properties of the compounds are improved if the mesoporous domain extension is above 40% of the total porous volume. This study shows that local biomass waste valorization is possible and that sugar cane bagasse-derived activated carbons appear as interesting new friction reduction additives for lubricants.
- 31 August 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (9) , 308
Open AccessBiomass-Derived Carbons as Friction Reducing Additives for Lubricants: Tribological Properties of Biochars and Activated Carbons Obtained from Sugar Cane Bagasse
Activated carbons are commonly used for adsorption/depollution applications, but only a few studies are related to their lubricating properties. In order to investigate a new family of friction reducers, the tribological properties of biochars and derived activated carbons obtained from sugar cane bagasse are investigated. Activated carbons are obtained from either a physical (steam water) or chemical (with phosphoric acid) activation process. The tribological tests show that the activated carbons present very low friction coefficients, close to 0.08. The correlation of textural and tribological investigations shows that the specific surface area of the compounds as well as the microporous and mesoporous domain extensions are key parameters to optimize the friction reduction properties of activated carbons. The friction properties of the compounds are improved if the mesoporous domain extension is above 40% of the total porous volume. This study shows that local biomass waste valorization is possible and that sugar cane bagasse-derived activated carbons appear as interesting new friction reduction additives for lubricants.
- 27 August 2021
- Published by ASME International in Journal of Tribology
- Vol. 144 (5)
Moringa Oil With Pristine and Fluorinated Carbon Nanofibers as Additives for Lubrication
This study focuses on the influence of local moringa oil on the performances of lubricants obtained from a blend of dodecane and pristine or fluorinated carbon nanofibers at ambient temperature. The friction experiments have been evaluated using a reciprocating ball on a plane tribometer. Moringa oil is used as a bio-additive in lubricant formulations. First, the addition of a small amount of moringa oil to dodecane allowed a reduction of about 50% of the base oil friction performances. Second, a comparative study on the friction properties of their blends with pristine carbon nanofibers (CNFs) and fluorinated ones (CF0.85) was investigated, based on which they were intended to be used as solid lubricant additives. An adsorption effect of fatty acid molecules is observed in CNFs particles unlike CF0.85. Whatever was the percentage of moringa oil added, more promising results were obtained with CF0.85. Physicochemical characterizations of the tribofilms evidence the good antiwear properties of the lubricants.
- 27 August 2021
- Published by ASME International in Journal of Tribology
- Vol. 144 (5)
Moringa Oil With Pristine and Fluorinated Carbon Nanofibers as Additives for Lubrication
This study focuses on the influence of local moringa oil on the performances of lubricants obtained from a blend of dodecane and pristine or fluorinated carbon nanofibers at ambient temperature. The friction experiments have been evaluated using a reciprocating ball on a plane tribometer. Moringa oil is used as a bio-additive in lubricant formulations. First, the addition of a small amount of moringa oil to dodecane allowed a reduction of about 50% of the base oil friction performances. Second, a comparative study on the friction properties of their blends with pristine carbon nanofibers (CNFs) and fluorinated ones (CF0.85) was investigated, based on which they were intended to be used as solid lubricant additives. An adsorption effect of fatty acid molecules is observed in CNFs particles unlike CF0.85. Whatever was the percentage of moringa oil added, more promising results were obtained with CF0.85. Physicochemical characterizations of the tribofilms evidence the good antiwear properties of the lubricants.
- Open Access
- 22 June 2021
- Published by MDPI AG in Lubricants
- Vol. 9 (7) , 65
Moringa and Graphite as Additives to Conventional Petroleum-Based Lubricants
Many researches are focused on the tribological performances of pure vegetable oil in order to replace the conventional mineral engine oils. This work investigates the influence of local moringa oil (noted VO) on the performances of lubricants formed from a blend of dodecane and graphite particles at ambient temperature. In a first part, a reduction of about 50% of friction properties of dodecane is observed when adding small amounts of moringa oil (VO), which is intended to be used as a bio-base performance additive in lubricant formulations. The friction properties of their blends with graphite, generally employed as solid lubricant additive, showed an adsorption effect of fatty acid molecules. The more promising results were obtained for the blend containing 2 w% of VO. Physicochemical characterizations of the tribofilms evidence the good antiwear properties of the lubricant.
- 22 June 2021
- Published by MDPI AG in Lubricants
- Vol. 9 (7) , 65
Open AccessMoringa and Graphite as Additives to Conventional Petroleum-Based Lubricants
Many researches are focused on the tribological performances of pure vegetable oil in order to replace the conventional mineral engine oils. This work investigates the influence of local moringa oil (noted VO) on the performances of lubricants formed from a blend of dodecane and graphite particles at ambient temperature. In a first part, a reduction of about 50% of friction properties of dodecane is observed when adding small amounts of moringa oil (VO), which is intended to be used as a bio-base performance additive in lubricant formulations. The friction properties of their blends with graphite, generally employed as solid lubricant additive, showed an adsorption effect of fatty acid molecules. The more promising results were obtained for the blend containing 2 w% of VO. Physicochemical characterizations of the tribofilms evidence the good antiwear properties of the lubricant.
- 1 April 2021
- Published by EDP Sciences
- p. 249-250
Références
Références was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 249.
- 1 April 2021
- Published by EDP Sciences
- p. 249-250
Références
Références was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 249.
- 1 April 2021
- Published by EDP Sciences
- p. 32-68
1.2 Problèmes
1.2 Problèmes was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 32.
- 1 April 2021
- Published by EDP Sciences
- p. 32-68
1.2 Problèmes
1.2 Problèmes was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 32.
- 1 April 2021
- Published by EDP Sciences
- p. 177-249
3.2 Problèmes
3.2 Problèmes was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 177.
- 1 April 2021
- Published by EDP Sciences
- p. 177-249
3.2 Problèmes
3.2 Problèmes was published in Diffusion, ségrégation et transformations de phase à l’état solide on page 177.