Chao-Ching Chang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chao-Ching Chang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
Liao-Ping Cheng
Department of Chemical and Materials Engineering, Tamkang University, New Taipei City, Taiwan, ROC
4 shared publicationsChia-Ying Lin
Tamkang University
2 shared publicationsFeng-Hsi Huang
2 shared publicationsYang-Yen Yu
Ming Chi University of Technology
2 shared publicationsChen-Liang Chang
Department of Chemical and Materials Engineering, Tamkang University, No. 151, Yingzhuan Rd., Danshui Dist., New Taipei City 25137, Taiwan
1 shared publication- Cheng-Lan Lin
Tamkang University
1 shared publication
Latest Publications
- Open Access
- 30 January 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 264, 03004
Preparation of hydrophobic nanofibers by electrospinning of PMMA dissolved in 2-propanol and water
In this study, we adopted rubbing alcohol (2-propanol/water = 7.8/2) as the solvent to prepare hydrophobic poly(methyl methacrylate) (PMMA) nanofibers (with submicron scale diameters) by electrospinning. In the literature, the general solvents, such as acetone, tetrahydrofuran, chloroform, toluene, etc., to dissolve PMMA are harmful and not environmentally friendly. 2-Propanol and water are both not hazardous to humans and the environment. PMMA dissolved in rubbing alcohol can be electrospun near room temperature. The solutions were heated at ~60 °C and allowed to cool to room temperature. Controlling the solution concentration and electrospinning parameters, fibers with diameters of 0.65~0.85 μm were obtained. The electrospun PMMA mats were hydrophobic with contact angles > 130 ° and showed good water resistance.
- 30 January 2019
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 264, 03004
Open AccessPreparation of hydrophobic nanofibers by electrospinning of PMMA dissolved in 2-propanol and water
In this study, we adopted rubbing alcohol (2-propanol/water = 7.8/2) as the solvent to prepare hydrophobic poly(methyl methacrylate) (PMMA) nanofibers (with submicron scale diameters) by electrospinning. In the literature, the general solvents, such as acetone, tetrahydrofuran, chloroform, toluene, etc., to dissolve PMMA are harmful and not environmentally friendly. 2-Propanol and water are both not hazardous to humans and the environment. PMMA dissolved in rubbing alcohol can be electrospun near room temperature. The solutions were heated at ~60 °C and allowed to cool to room temperature. Controlling the solution concentration and electrospinning parameters, fibers with diameters of 0.65~0.85 μm were obtained. The electrospun PMMA mats were hydrophobic with contact angles > 130 ° and showed good water resistance.
- 7 January 2019
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 48 (1) , 36-44
Preparation of dye-grafted-silica/poly(acrylate) color coatings with enhanced color stability at elevated temperatures
Purpose: The purpose of this paper is to investigate the effects of dipentaerythritol hexaacrylate (DPHA) and 3-(trimethoxysilyl)propyl methacrylate-modified silica nanoparticles (MSiO2) contents on the performances of the Disperse Red 1 (DR1)-grafted-silica/poly(acrylate) color hard coatings. Design/methodology/approach: The organic dye DR1 was silylated by reaction with the coupling agent 3-isocyanatopropyltriethoxysilane in methyl ethyl ketone. The silylated-DR1 thus obtained was grafted on MSiO2 to form dye-grafted silica (GSiO2). This hybrid dye was then UV-cured with the cross-linking agent, DPHA, to yield color coatings. Thermal durability of the coatings was evaluated based on their CIE (international commission on illumination) chromaticity coordinates and UV/Vis transmittances. Findings: The results indicated that GSiO2-coatings could tolerate thermal attack better than pristine DR1-coatings or dye-absorbed silica (DSiO2)-coatings because of the fact that DR1 was more finely dispersed in the polymer binder when covalently bonded to the silica particles. Under optimal conditions, coatings with very small change of saturation and hue after high-temperature treatments were obtainable. These coatings appeared transparent, had 3H-6H pencil hardness and adhered perfectly onto the poly(methyl methacrylate) substrates. Practical implications: Dye-grafted color coatings may find applications such as color filter photoresists for displays, microelectronics, printed circuit boards, etc. Originality/value: The performances of the coatings were evaluated in terms of mechanical strength, adherence to the substrate, transmittance and color stability against heat treatments, which have not been disclosed. Also, using a newly developed triangular composition diagram, suitable ranges for preparing useful color coatings were accessed. The present method deserves further research studies on green and blue dyes.
- 7 January 2019
- Published by Emerald Publishing in Pigment & Resin Technology
- Vol. 48 (1) , 36-44
Preparation of dye-grafted-silica/poly(acrylate) color coatings with enhanced color stability at elevated temperatures
Purpose: The purpose of this paper is to investigate the effects of dipentaerythritol hexaacrylate (DPHA) and 3-(trimethoxysilyl)propyl methacrylate-modified silica nanoparticles (MSiO2) contents on the performances of the Disperse Red 1 (DR1)-grafted-silica/poly(acrylate) color hard coatings. Design/methodology/approach: The organic dye DR1 was silylated by reaction with the coupling agent 3-isocyanatopropyltriethoxysilane in methyl ethyl ketone. The silylated-DR1 thus obtained was grafted on MSiO2 to form dye-grafted silica (GSiO2). This hybrid dye was then UV-cured with the cross-linking agent, DPHA, to yield color coatings. Thermal durability of the coatings was evaluated based on their CIE (international commission on illumination) chromaticity coordinates and UV/Vis transmittances. Findings: The results indicated that GSiO2-coatings could tolerate thermal attack better than pristine DR1-coatings or dye-absorbed silica (DSiO2)-coatings because of the fact that DR1 was more finely dispersed in the polymer binder when covalently bonded to the silica particles. Under optimal conditions, coatings with very small change of saturation and hue after high-temperature treatments were obtainable. These coatings appeared transparent, had 3H-6H pencil hardness and adhered perfectly onto the poly(methyl methacrylate) substrates. Practical implications: Dye-grafted color coatings may find applications such as color filter photoresists for displays, microelectronics, printed circuit boards, etc. Originality/value: The performances of the coatings were evaluated in terms of mechanical strength, adherence to the substrate, transmittance and color stability against heat treatments, which have not been disclosed. Also, using a newly developed triangular composition diagram, suitable ranges for preparing useful color coatings were accessed. The present method deserves further research studies on green and blue dyes.
- 2 April 2014
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 71 (1) , 129-135
TiO2 nanoparticles synthesized in an aprotic solvent and applied to prepare high-refractive-index TiO2-polyimide hybrid thin films
- 2 April 2014
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 71 (1) , 129-135
TiO2 nanoparticles synthesized in an aprotic solvent and applied to prepare high-refractive-index TiO2-polyimide hybrid thin films
- 17 April 2012
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 63 (1) , 30-35
Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates
- 17 April 2012
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 63 (1) , 30-35
Preparation and characterization of TiO2 sols and their UV-cured hybrid thin films on plastic substrates
- 15 June 2011
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 127 (3) , 440-445
Preparation and characterization of poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) composite thin films highly loaded with platinum nanoparticles
- 15 June 2011
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 127 (3) , 440-445
Preparation and characterization of poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) composite thin films highly loaded with platinum nanoparticles
- 27 May 2010
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 55 (2) , 199-206
Preparation and characterization of TiO2 hybrid sol for UV-curable high-refractive-index organic–inorganic hybrid thin films
- 27 May 2010
- Published by Springer Nature in Journal of Sol-Gel Science and Technology
- Vol. 55 (2) , 199-206
Preparation and characterization of TiO2 hybrid sol for UV-curable high-refractive-index organic–inorganic hybrid thin films
- 15 March 2010
- Published by Wiley in Polymer International
- Vol. 59 (7) , 910-916
Preparation and characterization of polyurethane–gold nanocomposites prepared using encapsulated gold nanoparticles
Gold nanoparticles (GNPs) have been widely studied due to their unique properties. Although many research groups have developed the synthesis of GNPs using various polymers as stabilizing or reducing agents, the effects of GNPs on the structures and properties of polymer matrices have been less reported. We propose a new design for the preparation of polyurethane–gold (PU–Au) nanocomposites. 11‐Mercapto‐1‐undecanol‐coated GNPs acted as the chain extenders and reacted with isocyanates to form covalent bonds between PU and GNPs. PU–Au nanocomposites were successfully synthesized, and the effects of multifunctional GNPs on the structures, morphology and properties of poly(ester urethane) were investigated. Scanning electron microscopy images suggested the GNPs can be dispersed uniformly in the PU matrix. Maltese‐cross of spherical crystals was observed in the PU–Au nanocomposites, and the size of the crystals decreased with an increase in gold content. As the gold content increased, the thermal decomposition temperature and the temperature of the maximum decomposition rate increased. The glass transition temperature, crystal melting temperature and melting enthalpy of the soft segment also increased progressively. The results showed that multifunctional GNPs concentrated hard segments and resulted in an increase of heterogeneous nucleation, phase separation and elasticity. Copyright © 2010 Society of Chemical Industry
- 15 March 2010
- Published by Wiley in Polymer International
- Vol. 59 (7) , 910-916
Preparation and characterization of polyurethane–gold nanocomposites prepared using encapsulated gold nanoparticles
Gold nanoparticles (GNPs) have been widely studied due to their unique properties. Although many research groups have developed the synthesis of GNPs using various polymers as stabilizing or reducing agents, the effects of GNPs on the structures and properties of polymer matrices have been less reported. We propose a new design for the preparation of polyurethane–gold (PU–Au) nanocomposites. 11‐Mercapto‐1‐undecanol‐coated GNPs acted as the chain extenders and reacted with isocyanates to form covalent bonds between PU and GNPs. PU–Au nanocomposites were successfully synthesized, and the effects of multifunctional GNPs on the structures, morphology and properties of poly(ester urethane) were investigated. Scanning electron microscopy images suggested the GNPs can be dispersed uniformly in the PU matrix. Maltese‐cross of spherical crystals was observed in the PU–Au nanocomposites, and the size of the crystals decreased with an increase in gold content. As the gold content increased, the thermal decomposition temperature and the temperature of the maximum decomposition rate increased. The glass transition temperature, crystal melting temperature and melting enthalpy of the soft segment also increased progressively. The results showed that multifunctional GNPs concentrated hard segments and resulted in an increase of heterogeneous nucleation, phase separation and elasticity. Copyright © 2010 Society of Chemical Industry
- 29 November 2006
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 291 (12) , 1521-1528
Synthesis and Optical Properties of Soluble Polyimide/Titania Hybrid Thin Films
Summary: In this study high‐refractive‐index polyimide/titania hybrid optical thin films were successfully prepared using a sol‐gel process combined with spin coating and multistep baking. The hybrid thin films were prepared from a soluble polyimide, a coupling agent, and a titania precursor. Transparent hybrid thin films can be obtained at TiO2 content as high as 40 wt.‐%. The FE‐SEM results suggest that the TiO2 particles in the hybrid thin films have diameters in the nanometer range. The thermal decomposition temperatures of the prepared hybrid materials are above those of the respective polyimide except for the highest TiO2 content hybrids. The refractive indices at 633 nm of the prepared hybrid thin films increase linearly from 1.66 to 1.82 with increasing TiO2 content. The excellent optical transparency, thermal stability, and tunable refractive index provide the potentials of the polyimide/titania hybrid thin films in optical applications. magnified image
- 29 November 2006
- Published by Wiley in Macromolecular Materials and Engineering
- Vol. 291 (12) , 1521-1528
Synthesis and Optical Properties of Soluble Polyimide/Titania Hybrid Thin Films
Summary: In this study high‐refractive‐index polyimide/titania hybrid optical thin films were successfully prepared using a sol‐gel process combined with spin coating and multistep baking. The hybrid thin films were prepared from a soluble polyimide, a coupling agent, and a titania precursor. Transparent hybrid thin films can be obtained at TiO2 content as high as 40 wt.‐%. The FE‐SEM results suggest that the TiO2 particles in the hybrid thin films have diameters in the nanometer range. The thermal decomposition temperatures of the prepared hybrid materials are above those of the respective polyimide except for the highest TiO2 content hybrids. The refractive indices at 633 nm of the prepared hybrid thin films increase linearly from 1.66 to 1.82 with increasing TiO2 content. The excellent optical transparency, thermal stability, and tunable refractive index provide the potentials of the polyimide/titania hybrid thin films in optical applications. magnified image