Susumu Yoshida
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Susumu Yoshida has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Hidekazu Murata
Graduate School of Informatics, Kyoto University
7 shared publications - Toshiaki Koike-Akino
Mitsubishi Electric Research Laboratories (MERL), Cambridge, MA, USA
4 shared publications Koji Yamamoto
3 shared publications- Atsushi Kusuda
Graduate School of Informatics, Kyoto University, Yoshida-honmachi, Sakyo-ku, Kyoto, 606-8501 Japan
1 shared publication Daichi Imamura
Next-Generation Mobile Communications Development Center, Tokyo R&D Center, Panasonic Corporation
1 shared publication- I. Wayan Mustika
Universitas Gadjah Mada
1 shared publication
Latest Publications
- 1 January 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E94.B (1) , 364-367
Resource Reduction Method for the LTE-Advanced Uplink ACK/NACK Signal and SR
Advanced Evolved Universal Terrestrial Radio Access (Advanced E-UTRA), called LTE-Advanced, has been standardized in the 3rd Generation Partnership Project (3GPP) as a candidate for IMT-Advanced. LTE-Advanced supports spatial orthogonal-resource transmit diversity (SORTD) [1], [2] for ACK/NACK signals and scheduling requests (SRs), which are used to control downlink hybrid automatic repeat requests (HARQs) and manage uplink radio resources based on uplink data traffic, respectively. Both ACK/NACK signals and SRs are carried via a physical uplink control channel (PUCCH) [3], and a common PUCCH format is used for both ACK/NACK signals and SRs. If SORTD is used, the base station assigns mutually orthogonal resources to each antenna included in the user equipment (UE) for ACK/NACK signals and SRs; hence, the number of required resources increases with the number of transmitting antennas in the UE. In this paper, we study the resource reduction method for ACK/NACK signal and SR in case of SORTD using the concept of common resource. In addition, we investigate a phase rotation scheme for common resources to improve the SR detection performance
- 1 January 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E94.B (1) , 364-367
Resource Reduction Method for the LTE-Advanced Uplink ACK/NACK Signal and SR
Advanced Evolved Universal Terrestrial Radio Access (Advanced E-UTRA), called LTE-Advanced, has been standardized in the 3rd Generation Partnership Project (3GPP) as a candidate for IMT-Advanced. LTE-Advanced supports spatial orthogonal-resource transmit diversity (SORTD) [1], [2] for ACK/NACK signals and scheduling requests (SRs), which are used to control downlink hybrid automatic repeat requests (HARQs) and manage uplink radio resources based on uplink data traffic, respectively. Both ACK/NACK signals and SRs are carried via a physical uplink control channel (PUCCH) [3], and a common PUCCH format is used for both ACK/NACK signals and SRs. If SORTD is used, the base station assigns mutually orthogonal resources to each antenna included in the user equipment (UE) for ACK/NACK signals and SRs; hence, the number of required resources increases with the number of transmitting antennas in the UE. In this paper, we study the resource reduction method for ACK/NACK signal and SR in case of SORTD using the concept of common resource. In addition, we investigate a phase rotation scheme for common resources to improve the SR detection performance
- 1 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E91-B (10) , 3103-3112
Performance Improvement of Wireless Mesh Networks by Using a Combination of Channel-Bonding and Multi-Channel Techniques
In the present paper, the use of a combination of channel-bonding and multi-channel techniques is proposed to improve the performance of wireless mesh networks (WMNs). It is necessary to increase the network throughput by broadening the bandwidth, and two approaches to effectively utilize the broadened bandwidth can be considered. One is the multi-channel technique, in which multiple separate frequency channels are used simultaneously for information transmission. The other is the channel-bonding technique used in IEEE 802.11n, which joins multiple frequency channels into a single broader channel. The former can reduce the channel traffic to mitigate the effect of packet collision, while the latter can increase the transmission rate. In the present paper, these two approaches are compared and their respective advantages are clarified in terms of the network throughput and delay performance assuming the same total bandwidth and a CSMA protocol. Our numerical and simulation results indicate that under low-traffic conditions, the channel-bonding technique can achieve low delay, while under traffic congestion conditions, the network performance can be improved by using multi-channel technique. Based on this result, the use of a combination of these two techniques is proposed for a WMN, and show that it is better to use a proper channel technique according to the network traffic condition. The findings of the present study also contribute to improving the performance of a multimedia network, which consists of different traffic types of applications.
- 1 October 2008
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E91-B (10) , 3103-3112
Performance Improvement of Wireless Mesh Networks by Using a Combination of Channel-Bonding and Multi-Channel Techniques
In the present paper, the use of a combination of channel-bonding and multi-channel techniques is proposed to improve the performance of wireless mesh networks (WMNs). It is necessary to increase the network throughput by broadening the bandwidth, and two approaches to effectively utilize the broadened bandwidth can be considered. One is the multi-channel technique, in which multiple separate frequency channels are used simultaneously for information transmission. The other is the channel-bonding technique used in IEEE 802.11n, which joins multiple frequency channels into a single broader channel. The former can reduce the channel traffic to mitigate the effect of packet collision, while the latter can increase the transmission rate. In the present paper, these two approaches are compared and their respective advantages are clarified in terms of the network throughput and delay performance assuming the same total bandwidth and a CSMA protocol. Our numerical and simulation results indicate that under low-traffic conditions, the channel-bonding technique can achieve low delay, while under traffic congestion conditions, the network performance can be improved by using multi-channel technique. Based on this result, the use of a combination of these two techniques is proposed for a WMN, and show that it is better to use a proper channel technique according to the network traffic condition. The findings of the present study also contribute to improving the performance of a multimedia network, which consists of different traffic types of applications.
- 1 March 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E89-B (3) , 985-989
Experimental Evaluation of Spatial Interleaving in Trellis-Coded MIMO Transmission
- 1 March 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E89-B (3) , 985-989
Experimental Evaluation of Spatial Interleaving in Trellis-Coded MIMO Transmission
- 1 March 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E89-B (3) , 845-852
Prototype Implementation of Real-Time ML Detectors for Spatial Multiplexing Transmission
- 1 March 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E89-B (3) , 845-852
Prototype Implementation of Real-Time ML Detectors for Spatial Multiplexing Transmission
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10 (15503607) , 4538-4542
Impact of Shadowing Correlation on Coverage of Multihop Cellular Systems
The impact of spatial correlation of shadowing on the coverage of TDMA multihop cellular systems is investigated in single-cell environments. The introduction of relaying capabilities to cellular systems may enhance the cell coverage as follows. Changing single-hop transmission to multihop transmission reduces per-hop path loss. In addition, since a multihop route is selected among a number of alternatives, the use of mobile stations suffering from severe shadowing can be decreased. In most studies on multihop cellular systems, shadowing is modeled as a location-independent log-normal random variable; however, adjacent shadowing values are spatially correlated because shadowing is caused by terrain configuration or obstacles between the transmitter and receiver. Thus, coverage enhancement due to relaying capabilities may not be achieved as expected. In this paper, first, according to the commonality between multihop transmission and symbol rate control, a similar methodology to formulate the spectral efficiency (SE) and outage probability of rate-adaptive cellular systems is used to estimate these performances of multihop cellular systems. Second, we investigate the impact of decorrelation distance, whose typical value for the urban environment is 20 meters, on the coverage of multihop cellular systems. By using a model for spatially correlated shadowing, numerical results reveal that when the coverage of single-hop cellular systems is ten times larger than the decorrelation distance, the introduction of relaying capability may enhance the coverage without significant degradation due to the spatial correlation of shadowing.
- 1 January 2006
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 10 (15503607) , 4538-4542
Impact of Shadowing Correlation on Coverage of Multihop Cellular Systems
The impact of spatial correlation of shadowing on the coverage of TDMA multihop cellular systems is investigated in single-cell environments. The introduction of relaying capabilities to cellular systems may enhance the cell coverage as follows. Changing single-hop transmission to multihop transmission reduces per-hop path loss. In addition, since a multihop route is selected among a number of alternatives, the use of mobile stations suffering from severe shadowing can be decreased. In most studies on multihop cellular systems, shadowing is modeled as a location-independent log-normal random variable; however, adjacent shadowing values are spatially correlated because shadowing is caused by terrain configuration or obstacles between the transmitter and receiver. Thus, coverage enhancement due to relaying capabilities may not be achieved as expected. In this paper, first, according to the commonality between multihop transmission and symbol rate control, a similar methodology to formulate the spectral efficiency (SE) and outage probability of rate-adaptive cellular systems is used to estimate these performances of multihop cellular systems. Second, we investigate the impact of decorrelation distance, whose typical value for the urban environment is 20 meters, on the coverage of multihop cellular systems. By using a model for spatially correlated shadowing, numerical results reveal that when the coverage of single-hop cellular systems is ten times larger than the decorrelation distance, the introduction of relaying capability may enhance the coverage without significant degradation due to the spatial correlation of shadowing.
- 1 October 2005
- Published by Springer Nature in Wireless Personal Communications
- Vol. 35 (1-2) , 213-225
Adaptive MLSE Equalizer with Per-Survivor QR Decomposition for Trellis-Coded MIMO Transmission
- 1 October 2005
- Published by Springer Nature in Wireless Personal Communications
- Vol. 35 (1-2) , 213-225
Adaptive MLSE Equalizer with Per-Survivor QR Decomposition for Trellis-Coded MIMO Transmission
- 1 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E88-B (8) , 3488-3492
Genetic Design Method for Near-Optimal Training Sequences in Wideband Spatial Multiplexing Systems
- 1 August 2005
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEICE Transactions on Communications
- Vol. E88-B (8) , 3488-3492
Genetic Design Method for Near-Optimal Training Sequences in Wideband Spatial Multiplexing Systems