Ken-Ichi Nagai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ken-Ichi Nagai has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
Takao Yamaguchi
Gunma University
17 shared publications- Shinichi Maruyama
Gunma University
15 shared publications Kota Muto
Gunma University, Kiryu, Gunma, Japan
2 shared publicationsNaoki Onozato
Gunma University
2 shared publications- Yusaku Fujii
Gunma University
2 shared publications Dai Yanagisawa
1 shared publication
Latest Publications
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2017, 341
Experiments on Nonlinear Vibrations of a Bi-stable CFRP Laminated Curved Plate
Experimental result are presented on nonlinear vibrations of a bi-stable CFRP laminated curved plate. The CFRP plate is fixed at center with bolts. The CFRP plate has two equilibrium configurations which is an upward convex and a downward convex. The characteristics of restoring force are measured in which asymmetric configurations appears in the transition between two stable equilibrium position.The natural frequencies are measured by impulse force. Moreover, natural modes of vibration are measured applying infinitesimal acoustic pressure. Next, the CFRP plate is exited with periodic acceleration by the electromagnetic shaker. Sweeping the excitation frequency, responses of the plate are measured by laser displacement sensors. Under uniform lateral periodic excitation, principal resonance with higher harmonics components is observed in large amplitude showing the characteristics of softening spring. Furthermore, sub-harmonic resonance of 1/2 order is generated when a concentrated mass is attached at a corner of the plate in downward convex which induces an asymmetric deformation.
- 1 January 2017
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2017, 341
Experiments on Nonlinear Vibrations of a Bi-stable CFRP Laminated Curved Plate
Experimental result are presented on nonlinear vibrations of a bi-stable CFRP laminated curved plate. The CFRP plate is fixed at center with bolts. The CFRP plate has two equilibrium configurations which is an upward convex and a downward convex. The characteristics of restoring force are measured in which asymmetric configurations appears in the transition between two stable equilibrium position.The natural frequencies are measured by impulse force. Moreover, natural modes of vibration are measured applying infinitesimal acoustic pressure. Next, the CFRP plate is exited with periodic acceleration by the electromagnetic shaker. Sweeping the excitation frequency, responses of the plate are measured by laser displacement sensors. Under uniform lateral periodic excitation, principal resonance with higher harmonics components is observed in large amplitude showing the characteristics of softening spring. Furthermore, sub-harmonic resonance of 1/2 order is generated when a concentrated mass is attached at a corner of the plate in downward convex which induces an asymmetric deformation.
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2012, _539-1_
539 Chaotic Vibrations of a Rectangular Shell-panel with Initial Deformation and In-plane Asymmetric Constraints
This paper presents analytical results on chaotic vibrations of a rectangular shell-panel under in-plane asymmetric constraints. The shell-panel with initial deflections is simply supported at all edges and also subjected to gravitational and periodic acceleration laterally. The boundary of the shell-panel is attached with an elastic material represented with distributed linear-springs in the in-plane directions. The outer sides of the springs are constrained by both uniform and asymmetric in-plane displacements. Neglecting the effect of inertia force along in-plane direction, the Donnell type equations modified with lateral inertia are applied as the governing equations of the shell-panel. The response of lateral deflection is assumed with multiple modes of vibration including unknown time functions. Stress function related with nonlinear coupling of the deflection is derived to satisfy the compatibility equation. The stress function satisfies both equilibrium conditions of in-plane forces and in-plane moments of forces at the boundaries. Applying the Galerkin procedure, equation of motion is reduced to a set of nonlinear ordinary differential equations. Characteristics of restoring force, linear vibrations and nonlinear responses are calculated on the shell-panel. The characteristics of restoring force show the type of a sofitening-and-hardening spring with a negative gradient. Nonlinear periodic responses are calculated with the harmonic balance method. Non-periodic responses are integrated numerically with the Runge-Kutta-Gill method. It is found that chaotic responses are generated in specific frequency regions. The chaotic responses are inspected with the Fourier spectra, the Poincare projections and the maximum Lyapunov exponents. The chaotic responses involve the sub-harmonic resonance response of 1/3 order corresponding to the lowest mode of vibration. Increasing the in-plane asymmetric constraints at the boundaries, contribution ratio of the mode of vibration that has a nodal line perpendicularly to the asymmetric constraints increases on the chaotic response.
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2012, _539-1_
539 Chaotic Vibrations of a Rectangular Shell-panel with Initial Deformation and In-plane Asymmetric Constraints
This paper presents analytical results on chaotic vibrations of a rectangular shell-panel under in-plane asymmetric constraints. The shell-panel with initial deflections is simply supported at all edges and also subjected to gravitational and periodic acceleration laterally. The boundary of the shell-panel is attached with an elastic material represented with distributed linear-springs in the in-plane directions. The outer sides of the springs are constrained by both uniform and asymmetric in-plane displacements. Neglecting the effect of inertia force along in-plane direction, the Donnell type equations modified with lateral inertia are applied as the governing equations of the shell-panel. The response of lateral deflection is assumed with multiple modes of vibration including unknown time functions. Stress function related with nonlinear coupling of the deflection is derived to satisfy the compatibility equation. The stress function satisfies both equilibrium conditions of in-plane forces and in-plane moments of forces at the boundaries. Applying the Galerkin procedure, equation of motion is reduced to a set of nonlinear ordinary differential equations. Characteristics of restoring force, linear vibrations and nonlinear responses are calculated on the shell-panel. The characteristics of restoring force show the type of a sofitening-and-hardening spring with a negative gradient. Nonlinear periodic responses are calculated with the harmonic balance method. Non-periodic responses are integrated numerically with the Runge-Kutta-Gill method. It is found that chaotic responses are generated in specific frequency regions. The chaotic responses are inspected with the Fourier spectra, the Poincare projections and the maximum Lyapunov exponents. The chaotic responses involve the sub-harmonic resonance response of 1/3 order corresponding to the lowest mode of vibration. Increasing the in-plane asymmetric constraints at the boundaries, contribution ratio of the mode of vibration that has a nodal line perpendicularly to the asymmetric constraints increases on the chaotic response.
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 78 (788) , 1119-1132
Analysis of Impact Responses for Box Structures Having Damping Layers Supported by Nonlinear Springs (Influences of Damping Couplings among Parts on Nonlinear Responses)
This paper describes vibration analysis using finite element method for box structures consisting of elastic flat plates and damping layers on their bottom plates. The box structures are supported by nonlinear concentrated springs on the bottom plate. The restoring force of the springs have cubic nonlinearity and linear hysteresis damping. Finite element for the nonlinear springs are expressed and are connected to the elastic plates modeled by linear solid finite elements in consideration of complex modulus of elasticity. Further, the discretized equations in physical coordinate are transformed into the nonlinear ordinary coupled equations using normal coordinate corresponding to linear natural modes. Using material damping and shares of strain energy for the parts (i.e. the plates, the damping layer and the springs), we evaluate damping couplings among the parts. Further, we clarify influences of the damping couplings on nonlinear impact responses.
- 1 January 2012
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 78 (788) , 1119-1132
Analysis of Impact Responses for Box Structures Having Damping Layers Supported by Nonlinear Springs (Influences of Damping Couplings among Parts on Nonlinear Responses)
This paper describes vibration analysis using finite element method for box structures consisting of elastic flat plates and damping layers on their bottom plates. The box structures are supported by nonlinear concentrated springs on the bottom plate. The restoring force of the springs have cubic nonlinearity and linear hysteresis damping. Finite element for the nonlinear springs are expressed and are connected to the elastic plates modeled by linear solid finite elements in consideration of complex modulus of elasticity. Further, the discretized equations in physical coordinate are transformed into the nonlinear ordinary coupled equations using normal coordinate corresponding to linear natural modes. Using material damping and shares of strain energy for the parts (i.e. the plates, the damping layer and the springs), we evaluate damping couplings among the parts. Further, we clarify influences of the damping couplings on nonlinear impact responses.
- 30 July 2011
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 67 (4) , 2363-2379
Chaotic vibrations of a post-buckled L-shaped beam with an axial constraint
- 30 July 2011
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 67 (4) , 2363-2379
Chaotic vibrations of a post-buckled L-shaped beam with an axial constraint
- 1 January 2009
- Published by ASME International
- p. 1799-1807
Chaotic Vibrations on a Coupled Vibrating System of a Post-Buckled Cantilevered Beam and an Axial Vibrating Body Connected With a Stretched String
Analytical results are presented on chaotic vibrations on a coupled vibrating system of a post-buckled cantilevered beam and an axial vibrating body connected with a stretched string. The string is stretched between the top end of the cantilevered beam and the axial vibrating body which consists of a mass and a spring. As an initial axial displacement is applied to the spring, the beam is buckled by the tensile force of the string. The main scope of this paper is to investigate the effects of the axial inertia of the vibrating body on the chaotic vibrations of the system. The dynamical model involves nonlinear geometrical coupling between the deformation and the axial force of the beam at the boundary. Furthermore, the problem includes the static buckling and the nonlinear vibration. By using the mode shape function, which was proposed by the senior author, as a coordinate function of the governing equations, nonlinear ordinary differential equations in multiple-degree-of-freedom system are derived by the modified Galerkin procedure. Periodic responses of the beam are calculated with the harmonic balance method, while chaotic responses are integrated numerically. Chaotic time responses are inspected with the Fourier spectra, the Poincare´ projections, the maximum Lyapunov exponents and the principal component analysis. Chaotic responses are generated from the sub-harmonic resonance responses of 1/2 and 1/3 orders. The results of the principal component analysis shows that the lowest mode of vibration contributes to the chaotic response dominantly, while the second mode of vibration also contribute to the chaos with small amount of amplitude. Inspection of the kinetic energy of each vibration mode shows that the vibration mode with large axial displacement is also dominant in the chaotic response.
- 1 January 2009
- Published by ASME International
- p. 1799-1807
Chaotic Vibrations on a Coupled Vibrating System of a Post-Buckled Cantilevered Beam and an Axial Vibrating Body Connected With a Stretched String
Analytical results are presented on chaotic vibrations on a coupled vibrating system of a post-buckled cantilevered beam and an axial vibrating body connected with a stretched string. The string is stretched between the top end of the cantilevered beam and the axial vibrating body which consists of a mass and a spring. As an initial axial displacement is applied to the spring, the beam is buckled by the tensile force of the string. The main scope of this paper is to investigate the effects of the axial inertia of the vibrating body on the chaotic vibrations of the system. The dynamical model involves nonlinear geometrical coupling between the deformation and the axial force of the beam at the boundary. Furthermore, the problem includes the static buckling and the nonlinear vibration. By using the mode shape function, which was proposed by the senior author, as a coordinate function of the governing equations, nonlinear ordinary differential equations in multiple-degree-of-freedom system are derived by the modified Galerkin procedure. Periodic responses of the beam are calculated with the harmonic balance method, while chaotic responses are integrated numerically. Chaotic time responses are inspected with the Fourier spectra, the Poincare´ projections, the maximum Lyapunov exponents and the principal component analysis. Chaotic responses are generated from the sub-harmonic resonance responses of 1/2 and 1/3 orders. The results of the principal component analysis shows that the lowest mode of vibration contributes to the chaotic response dominantly, while the second mode of vibration also contribute to the chaos with small amount of amplitude. Inspection of the kinetic energy of each vibration mode shows that the vibration mode with large axial displacement is also dominant in the chaotic response.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2008, _109-1_
109 Chaotic Vibrations of a post-buckled beam with an axial nonlinear constraint under combined axial-and-lateral periodic excitations
Analytical results are presented on chaotic vibrations of a post-buckled beam constrained by a nonlinear axial spring under axial and lateral excitations. The nonlinear axial spring has a weak secondary nonlinearity. Equations of motion of the beam are derived including the term of parametric excitation due to the axial excitation. Nonlinear periodic responses are calculated with the harmonic balance method. Time progress of the beam, including chaotic response, is calculated with numerical integration. Effects of the amplitude and phase of the axial excitation are examined on the nonlinear periodic responses and the chaotic responses of the beam.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2008, _109-1_
109 Chaotic Vibrations of a post-buckled beam with an axial nonlinear constraint under combined axial-and-lateral periodic excitations
Analytical results are presented on chaotic vibrations of a post-buckled beam constrained by a nonlinear axial spring under axial and lateral excitations. The nonlinear axial spring has a weak secondary nonlinearity. Equations of motion of the beam are derived including the term of parametric excitation due to the axial excitation. Nonlinear periodic responses are calculated with the harmonic balance method. Time progress of the beam, including chaotic response, is calculated with numerical integration. Effects of the amplitude and phase of the axial excitation are examined on the nonlinear periodic responses and the chaotic responses of the beam.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2008, _134-1_
134 Experiments on Chaotic Vibrations of a Rectangular Plate under an In-Plane Elastic Constraint at Clamped Edges
Experimental results are presented on chaotic vibrations of a rectangular plate with an in-plane elastic constraint. Opposite edges of the plate are clamped and the other edges are simply supported. One side of the clamped edges is connected with elastic springs and is movable to an in-plane direction. Under the selected in-plane compressive force, the plate has the conditions of internal resonances. By exciting the plate with periodic lateral acceleration, chaotic responses are obtained in specific frequency regions of excitation. The chaotic responses are examined with the Fourier spectra, the principal components analysis and the maximum Lyapunov exponents. It is found that the chaotic responses are generated with the condition of the internal resonances of multiple modes. In the dominant chaotic responses, the ultra-sub-harmonic resonance of 2/3 order with the first mode of vibration and the ultra-sub-harmonic resonance of 4/3 order with the second mode of vibration contribute to the chaotic response. By changing exiting amplitude, instability boundaries of the chaotic responses are also clarified.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2008, _134-1_
134 Experiments on Chaotic Vibrations of a Rectangular Plate under an In-Plane Elastic Constraint at Clamped Edges
Experimental results are presented on chaotic vibrations of a rectangular plate with an in-plane elastic constraint. Opposite edges of the plate are clamped and the other edges are simply supported. One side of the clamped edges is connected with elastic springs and is movable to an in-plane direction. Under the selected in-plane compressive force, the plate has the conditions of internal resonances. By exciting the plate with periodic lateral acceleration, chaotic responses are obtained in specific frequency regions of excitation. The chaotic responses are examined with the Fourier spectra, the principal components analysis and the maximum Lyapunov exponents. It is found that the chaotic responses are generated with the condition of the internal resonances of multiple modes. In the dominant chaotic responses, the ultra-sub-harmonic resonance of 2/3 order with the first mode of vibration and the ultra-sub-harmonic resonance of 4/3 order with the second mode of vibration contribute to the chaotic response. By changing exiting amplitude, instability boundaries of the chaotic responses are also clarified.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 74 (741) , 1080-1086
Analysis on Nonlinear Vibrations of a Cantilevered Beam Constrained by a Stretched String at the Tip End
Analytical results are presented on nonlinear vibrations of a cantilevered beam constrained by a stretched string at the tip end. The beam is subjected to periodic lateral acceleration. Governing equations of motion and boundary condition, which have nonlinear geometrical coupling with an axial force, are derived by the Hamilton's principle. The mode shape function proposed by the senior author is introduced to reduce the governing equations to the nonlinear differential equation by the modified Galerkin method. The mode shape function is expressed with the product of the trigonometrical function and the finite power series truncated with the fourth order. The coefficients of the power series are determined by solving the homogeneous equation for the boundary condition at the buckling state of the beam. The trigonometrical function can express the form of higher mode of vibration. Nonlinear periodic responses are calculated by the harmonic balance method. Nonlinear non-periodic responses are obtained by the numerical integration. Comparing the non-linear responses by the analyses with the approaches of single-degree-of-freedom and of multiple-degree-of-freedom, higher mode of vibration play important roles both in the periodic response and in the chaotic response. It is shown that the analysis based on the approach of the mode shape function makes fairly good prediction to the nonlinear phenomena of the cantilevered beam constrained by the stretched string.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 74 (741) , 1080-1086
Analysis on Nonlinear Vibrations of a Cantilevered Beam Constrained by a Stretched String at the Tip End
Analytical results are presented on nonlinear vibrations of a cantilevered beam constrained by a stretched string at the tip end. The beam is subjected to periodic lateral acceleration. Governing equations of motion and boundary condition, which have nonlinear geometrical coupling with an axial force, are derived by the Hamilton's principle. The mode shape function proposed by the senior author is introduced to reduce the governing equations to the nonlinear differential equation by the modified Galerkin method. The mode shape function is expressed with the product of the trigonometrical function and the finite power series truncated with the fourth order. The coefficients of the power series are determined by solving the homogeneous equation for the boundary condition at the buckling state of the beam. The trigonometrical function can express the form of higher mode of vibration. Nonlinear periodic responses are calculated by the harmonic balance method. Nonlinear non-periodic responses are obtained by the numerical integration. Comparing the non-linear responses by the analyses with the approaches of single-degree-of-freedom and of multiple-degree-of-freedom, higher mode of vibration play important roles both in the periodic response and in the chaotic response. It is shown that the analysis based on the approach of the mode shape function makes fairly good prediction to the nonlinear phenomena of the cantilevered beam constrained by the stretched string.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 74 (741) , 1073-1079
Effects of Axial Compressive Load on Chaotic Vibrations of a Clamped-Supported Beam
Experimental results and analytical results are presented on the effects of axial compressive load on chaotic vibrations of a clamped-supported beam subjected to periodic lateral acceleration. The beam is elastically compressed by an axial spring at the simply supported end. In the experiment, nonlinear and chaotic responses are detected under various compressions. In the analysis, the governing equation is reduced to nonlinear differential equations of a multiple-degree-of-freedom system by the Galerkin procedure. The nonlinear periodic responses are calculated by the harmonic balance method. The chaotic responses are numerically integrated by the Runge-Kutta-Gill method. The chaotic responses of the beam under axial compression are examined with the Fourier spectra, the Poincare projections, the maximum Lyapunov exponents and the principal components by the Karhunen-Loéve transformation. Both results of the experiment and the analysis coincide fairly well in detail. The frequency region of the chaos spread with the increment of the axial compressive force. The chaotic responses are generated within the axial compression range of the same ratio to the each buckling load. Distinct fractal pattern can be observed in the attractors of Poincare projections. The number of modes generated in the chaos is counted as three by the maximum Lyapunov exponent and the Lyapunov dimension.
- 1 January 2008
- Published by Japan Society of Mechanical Engineers in TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
- Vol. 74 (741) , 1073-1079
Effects of Axial Compressive Load on Chaotic Vibrations of a Clamped-Supported Beam
Experimental results and analytical results are presented on the effects of axial compressive load on chaotic vibrations of a clamped-supported beam subjected to periodic lateral acceleration. The beam is elastically compressed by an axial spring at the simply supported end. In the experiment, nonlinear and chaotic responses are detected under various compressions. In the analysis, the governing equation is reduced to nonlinear differential equations of a multiple-degree-of-freedom system by the Galerkin procedure. The nonlinear periodic responses are calculated by the harmonic balance method. The chaotic responses are numerically integrated by the Runge-Kutta-Gill method. The chaotic responses of the beam under axial compression are examined with the Fourier spectra, the Poincare projections, the maximum Lyapunov exponents and the principal components by the Karhunen-Loéve transformation. Both results of the experiment and the analysis coincide fairly well in detail. The frequency region of the chaos spread with the increment of the axial compressive force. The chaotic responses are generated within the axial compression range of the same ratio to the each buckling load. Distinct fractal pattern can be observed in the attractors of Poincare projections. The number of modes generated in the chaos is counted as three by the maximum Lyapunov exponent and the Lyapunov dimension.
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2007, _517-1_
517 Experiments on Chaotic Vibrations of a Cantilevered Beam Geometrically Constrained by a Stretched-string at a Tip End
This study presents experimental results on chaotic vibrations of a post-buckled cantilevered beam geometrically constrained by a stretched-string at a tip end. One end of the string is fixed on a spring plate and the other end is connected to the free edge of the beam. The string i s stretched by moving the spring plate, then the beam is buckled to a post-buckled configuration. Post-buckled cantilevered beam is subjected to lateral periodic acceleration, then chaotic responses appear accompanied by internal resonance. Chaotic responses are examined by the Fourier spectrum, the Poincare map and maximum Lyapnov exponents. Contributions of vibration modes to the chaotic responses are analyzed by the principal component analysis.
- 1 January 2007
- Published by Japan Society of Mechanical Engineers in The Proceedings of the Dynamics & Design Conference
- Vol. 2007, _517-1_
517 Experiments on Chaotic Vibrations of a Cantilevered Beam Geometrically Constrained by a Stretched-string at a Tip End
This study presents experimental results on chaotic vibrations of a post-buckled cantilevered beam geometrically constrained by a stretched-string at a tip end. One end of the string is fixed on a spring plate and the other end is connected to the free edge of the beam. The string i s stretched by moving the spring plate, then the beam is buckled to a post-buckled configuration. Post-buckled cantilevered beam is subjected to lateral periodic acceleration, then chaotic responses appear accompanied by internal resonance. Chaotic responses are examined by the Fourier spectrum, the Poincare map and maximum Lyapnov exponents. Contributions of vibration modes to the chaotic responses are analyzed by the principal component analysis.