Ahu Demiroz Gun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ahu Demiroz Gun has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Cemre Nur Kuyucak
Department of Textile Engineering, Engineering Faculty, Usak University, Usak, Turkey
2 shared publications- Eren Oner
Usak Universitesi
2 shared publications Aslihan Bodur
Engineering Faculty, Department of Textile Engineering, Usak University, Usak, Turkey
1 shared publicationAyse Sevkan Macit
Engineering Faculty, Department of Textile Engineering, Usak University, Usak, Turkey
1 shared publicationB. T. Unal
Usak University
1 shared publicationBahar Tiber
Usak University, Turkey
1 shared publication
Latest Publications
- 28 August 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (10) , 3723-3742
The Effects of Fiber Type, Elastane (El) Usage, and Knit Structure on the Moisture Management Properties of Sandwich-Type Double-Face Knitted Fabrics
- 28 August 2023
- Published by Springer Nature in Fibers and Polymers
- Vol. 24 (10) , 3723-3742
The Effects of Fiber Type, Elastane (El) Usage, and Knit Structure on the Moisture Management Properties of Sandwich-Type Double-Face Knitted Fabrics
- 21 August 2022
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (9) , 2762-2771
Thermo-physiological Comfort Performance of Recycled Plain Knitted Fabrics Produced from Acrylic Waste Fiber with the Effects of Incorporated Covered and PBT Elastic Yarns
- 21 August 2022
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (9) , 2762-2771
Thermo-physiological Comfort Performance of Recycled Plain Knitted Fabrics Produced from Acrylic Waste Fiber with the Effects of Incorporated Covered and PBT Elastic Yarns
- 29 July 2021
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (1) , 282-294
Performance Properties of Plain Knitted Fabrics Made from Open End Recycled Acrylic Yarn with the Effects of Covered and PBT Elastic Yarns
- 29 July 2021
- Published by Springer Nature in Fibers and Polymers
- Vol. 23 (1) , 282-294
Performance Properties of Plain Knitted Fabrics Made from Open End Recycled Acrylic Yarn with the Effects of Covered and PBT Elastic Yarns
- 26 May 2021
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 50 (1) , 378-390
Evaluation of Unevenness and Tensile Properties of Open-End Yarns Produced by Recycled Acrylic-Based Textile Wastes from Different Sources
The classification of acrylic textile wastes based on source is important, because each waste type from different sources greatly affects product quality. This study primarily deals with recycled acrylic fibers obtained from three categories of acrylic-based tops, yarn, and fabric waste through a mechanical recycling method of garneting. With the use of recycled acrylic fiber types as 100 % ratio and in blends with recycled cotton and virgin polyester fibers, open-end yarns in two twist coefficients were produced, and then the effects of these selected materials and twist coefficient on the unevenness (CVm) and tensile properties of the yarns were discussed. The 100 % recycled acrylic yarn type produced from the tops waste type revealed the lowest CVm results and the highest tenacity and breaking elongation results. The blending of the virgin polyester fiber with the recycled acrylic fiber types improved the tenacity results. It can be concluded that tops, yarn, and fabric acrylic wastes have potential to be used as sustainable and low-cost sources of raw material in the production of open yarns of acceptable quality.
- 26 May 2021
- Published by ASTM International in Journal of Testing and Evaluation
- Vol. 50 (1) , 378-390
Evaluation of Unevenness and Tensile Properties of Open-End Yarns Produced by Recycled Acrylic-Based Textile Wastes from Different Sources
The classification of acrylic textile wastes based on source is important, because each waste type from different sources greatly affects product quality. This study primarily deals with recycled acrylic fibers obtained from three categories of acrylic-based tops, yarn, and fabric waste through a mechanical recycling method of garneting. With the use of recycled acrylic fiber types as 100 % ratio and in blends with recycled cotton and virgin polyester fibers, open-end yarns in two twist coefficients were produced, and then the effects of these selected materials and twist coefficient on the unevenness (CVm) and tensile properties of the yarns were discussed. The 100 % recycled acrylic yarn type produced from the tops waste type revealed the lowest CVm results and the highest tenacity and breaking elongation results. The blending of the virgin polyester fiber with the recycled acrylic fiber types improved the tenacity results. It can be concluded that tops, yarn, and fabric acrylic wastes have potential to be used as sustainable and low-cost sources of raw material in the production of open yarns of acceptable quality.
- 26 April 2019
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 110 (11) , 1569-1579
Investigation of the quality properties of open-end spun recycled yarns made from blends of recycled fabric scrap wastes and virgin polyester fibre
Recycled fibre obtained from fabric scrap wastes is characterized by its low quality properties in terms of inhomogeneous fibre type and non-uniformly distributed short fibre lengths, both of which negatively influences the production process and the quality of the recycled yarns made from it. One of the common ways to utilize recycled fibre in yarn production is to blend it with virgin fibres. In this research article, the quality properties of the open-end spun recycled yarns produced in different material and spinning parameters from blends of recycled fabric scrap wastes and virgin polyester fibres are investigated. As material and spinning parameters, yarn count, blend ratio, waste type, waste origin, twist coefficient and rotor diameter are selected and their effects on the quality properties of the recycled yarns are evaluated through statistical methods. Statistical results reveal that especially blend ratio, yarn count and twist coefficient significantly affect the quality properties. In general, incorporation of virgin polyester fibre to recycled fibre tends to bring about improvement in yarn quality.
- 26 April 2019
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 110 (11) , 1569-1579
Investigation of the quality properties of open-end spun recycled yarns made from blends of recycled fabric scrap wastes and virgin polyester fibre
Recycled fibre obtained from fabric scrap wastes is characterized by its low quality properties in terms of inhomogeneous fibre type and non-uniformly distributed short fibre lengths, both of which negatively influences the production process and the quality of the recycled yarns made from it. One of the common ways to utilize recycled fibre in yarn production is to blend it with virgin fibres. In this research article, the quality properties of the open-end spun recycled yarns produced in different material and spinning parameters from blends of recycled fabric scrap wastes and virgin polyester fibres are investigated. As material and spinning parameters, yarn count, blend ratio, waste type, waste origin, twist coefficient and rotor diameter are selected and their effects on the quality properties of the recycled yarns are evaluated through statistical methods. Statistical results reveal that especially blend ratio, yarn count and twist coefficient significantly affect the quality properties. In general, incorporation of virgin polyester fibre to recycled fibre tends to bring about improvement in yarn quality.
- 22 November 2016
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (9) , 1518-1527
Thermo-physiological comfort properties of double-face knitted fabrics made from different types of polyester yarns and cotton yarn
Double-face knitted fabrics with hydrophobic inner and hydrophilic outer layers are characterised by their advantageous thermo-physiological comfort property that facilitates the transport of sweat from skin to outer fabric layer where it can be evaporated easily. In this study, for the production of double-face knitted fabrics, cotton yarn as hydrophilic yarn type and five different polyester filament yarns consisting of standard polyester, hollow polyester, micro polyester, textured polyester and textured micro polyester as hydrophobic yarn type were used. In order to determine the thermo-physiological comfort properties of the fabrics, air permeability, water vapour permeability, thermal conductivity, thermal resistance and overall moisture management capacity were measured. The results were comparatively analysed using statistical methods. The experimental results demonstrated that the polyester-type yarns and the combinations of them with the cotton yarn in fabric layers affected the thermo-physiological comfort properties significantly. The fabrics with polyester-type inner face and cotton outer face showed the best moisture transmission properties.
- 22 November 2016
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 108 (9) , 1518-1527
Thermo-physiological comfort properties of double-face knitted fabrics made from different types of polyester yarns and cotton yarn
Double-face knitted fabrics with hydrophobic inner and hydrophilic outer layers are characterised by their advantageous thermo-physiological comfort property that facilitates the transport of sweat from skin to outer fabric layer where it can be evaporated easily. In this study, for the production of double-face knitted fabrics, cotton yarn as hydrophilic yarn type and five different polyester filament yarns consisting of standard polyester, hollow polyester, micro polyester, textured polyester and textured micro polyester as hydrophobic yarn type were used. In order to determine the thermo-physiological comfort properties of the fabrics, air permeability, water vapour permeability, thermal conductivity, thermal resistance and overall moisture management capacity were measured. The results were comparatively analysed using statistical methods. The experimental results demonstrated that the polyester-type yarns and the combinations of them with the cotton yarn in fabric layers affected the thermo-physiological comfort properties significantly. The fabrics with polyester-type inner face and cotton outer face showed the best moisture transmission properties.
- 12 September 2015
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 107 (9) , 1112-1121
Thermal properties of socks made from reclaimed fibre
In this study, thermal properties of the socks made from the blend of reclaimed cotton fibre and virgin polyester fibre are investigated in comparison with those of similar socks made from virgin cotton fibre, together with the influence of incorporated elastane. Statistical results reveal that elastane addition and fibre type significantly affect all of the thermal properties of the socks. Elastane addition leads to increase in the thermal conductivity, thermal resistance and thermal absorptivity values and decrease in the water vapour permeability values. The reclaimed fibre socks exhibit lower thermal conductivity and thermal absorptivity and higher thermal resistance than the cotton socks. The water vapour permeability results of the reclaimed fibre socks with no elastane are higher than those of the cotton socks with no elastane. The difference between the water vapour permeability of the reclaimed socks with elastane and the cotton socks with elastane is found to be statistically insignificant.
- 12 September 2015
- Published by Taylor & Francis in The Journal of the Textile Institute
- Vol. 107 (9) , 1112-1121
Thermal properties of socks made from reclaimed fibre
In this study, thermal properties of the socks made from the blend of reclaimed cotton fibre and virgin polyester fibre are investigated in comparison with those of similar socks made from virgin cotton fibre, together with the influence of incorporated elastane. Statistical results reveal that elastane addition and fibre type significantly affect all of the thermal properties of the socks. Elastane addition leads to increase in the thermal conductivity, thermal resistance and thermal absorptivity values and decrease in the water vapour permeability values. The reclaimed fibre socks exhibit lower thermal conductivity and thermal absorptivity and higher thermal resistance than the cotton socks. The water vapour permeability results of the reclaimed fibre socks with no elastane are higher than those of the cotton socks with no elastane. The difference between the water vapour permeability of the reclaimed socks with elastane and the cotton socks with elastane is found to be statistically insignificant.
- 7 December 2011
- Published by Springer Nature in Fibers and Polymers
- Vol. 12 (8) , 1083-1090
Dimensional, physical and thermal properties of plain knitted fabrics made from 50/50 blend of modal viscose fiber in microfiber form with cotton fiber
- 7 December 2011
- Published by Springer Nature in Fibers and Polymers
- Vol. 12 (8) , 1083-1090
Dimensional, physical and thermal properties of plain knitted fabrics made from 50/50 blend of modal viscose fiber in microfiber form with cotton fiber
- 11 July 2011
- Published by SAGE Publications in Textile Research Journal
- Vol. 81 (18) , 1903-1915
Color, color fastness and abrasion properties of 50/50 bamboo/cotton blended plain knitted fabrics in three different stitch lengths
In this study, the color and color fastness properties of the dyed plain knitted fabrics made from 50/50 bamboo/cotton blended yarns with three different stitch lengths are investigated in comparison with those of the similar fabrics made from 50/50 conventional viscose/cotton and 50/50 modal/cotton blended yarns. Abrasion behaviors of the fabrics are assessed by measuring the weight loss and the color values after four different increasing abrasion cycles. The bamboo/cotton fabrics reveal the highest K/S and C* values, but the lowest L* values before abrasion. The lowest weight loss values are obtained for the bamboo/cotton fabrics. Regarding the color properties after abrasion, the bamboo/cotton fabrics show the highest K/S and C* values, but the lowest L* values as in the case of those obtained before abrasion. The highest color difference values (ΔE*) occurred between the beginning and the end of the abrasion test (20000 cycles) and are observed for the bamboo/cotton fabrics. The rubbing, wash and perspiration fastness results of the bamboo/cotton fabrics are found to be worse than those of the other fabrics having viscose/cotton and modal/cotton yarns. However, the highest light fastness results are obtained for the bamboo/cotton fabrics. From the color values after abrasion and the fastness results, it can be concluded that the bamboo/cotton fabrics having the better dyeing properties lose their color more easily than the other fabrics having the viscose/cotton and modal/cotton yarns. The results also indicate that stitch length affects the color values before abrasion and the weight loss and color values after abrasion.
- 11 July 2011
- Published by SAGE Publications in Textile Research Journal
- Vol. 81 (18) , 1903-1915
Color, color fastness and abrasion properties of 50/50 bamboo/cotton blended plain knitted fabrics in three different stitch lengths
In this study, the color and color fastness properties of the dyed plain knitted fabrics made from 50/50 bamboo/cotton blended yarns with three different stitch lengths are investigated in comparison with those of the similar fabrics made from 50/50 conventional viscose/cotton and 50/50 modal/cotton blended yarns. Abrasion behaviors of the fabrics are assessed by measuring the weight loss and the color values after four different increasing abrasion cycles. The bamboo/cotton fabrics reveal the highest K/S and C* values, but the lowest L* values before abrasion. The lowest weight loss values are obtained for the bamboo/cotton fabrics. Regarding the color properties after abrasion, the bamboo/cotton fabrics show the highest K/S and C* values, but the lowest L* values as in the case of those obtained before abrasion. The highest color difference values (ΔE*) occurred between the beginning and the end of the abrasion test (20000 cycles) and are observed for the bamboo/cotton fabrics. The rubbing, wash and perspiration fastness results of the bamboo/cotton fabrics are found to be worse than those of the other fabrics having viscose/cotton and modal/cotton yarns. However, the highest light fastness results are obtained for the bamboo/cotton fabrics. From the color values after abrasion and the fastness results, it can be concluded that the bamboo/cotton fabrics having the better dyeing properties lose their color more easily than the other fabrics having the viscose/cotton and modal/cotton yarns. The results also indicate that stitch length affects the color values before abrasion and the weight loss and color values after abrasion.
- 7 April 2011
- Published by Springer Nature in Fibers and Polymers
- Vol. 12 (2) , 258-267
Dimensional, physical and thermal comfort properties of plain knitted fabrics made from modal viscose yarns having microfibers and conventional fibers
- 7 April 2011
- Published by Springer Nature in Fibers and Polymers
- Vol. 12 (2) , 258-267
Dimensional, physical and thermal comfort properties of plain knitted fabrics made from modal viscose yarns having microfibers and conventional fibers