SSStefano Stilli

Stefano Stilli

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Stefano Stilli has a total of 151 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    In-House, Fast FDM Prototyping of a Custom Cutting Guide for a Lower-Risk Pediatric Femoral Osteotomy

    by Leonardo Frizziero, Gian Maria Santi, Christian Leon-Cardenas, Giampiero Donnici, Alfredo Liverani, Paola Papaleo, Francesca Napolitano, Curzio Pagliari, Giovanni Luigi Di Gennaro, Stefano Stallone, et al.

    Three-dimensional printed custom cutting guides (CCGs) are becoming more and more investigated in medical literature, as a patient-specific approach is often desired and very much needed in today’s surgical practice. Three-dimensional printing applications and computer-aided surgical simulations (CASS) allow for meticulous preoperatory planning and substantial reductions of operating time and risk of human error. However, several limitations seem to slow the large-scale adoption of 3D printed CCGs. CAD designing and 3D printing skills are inevitably needed to develop workflow and address the study; therefore, hospitals are pushed to include third-party collaboration, from highly specialized medical centers to industrial engineering companies, thus increasing the time and cost of labor. The aim of this study was to move towards the feasibility of an in-house, low-cost CCG 3D printing methodology for pediatric orthopedic (PO) surgery. The prototype of a femoral cutting guide was developed for its application at the IOR—Rizzoli Orthopedic Institute of Bologna. The element was printed with an entry-level 3D printer with a high-temperature PLA fiber, whose thermomechanical properties can withstand common steam heat sterilization without bending or losing the original geometry. This methodology allowed for extensive preoperatory planning that would likewise reduce the overall surgery time, whilst reducing the risks related to the intervention.


  • Open Access

    Effectiveness Assessment of CAD Simulation in Complex Orthopedic Surgery Practices

    by Leonardo Frizziero, Curzio Pagliari, Giampiero Donnici, Alfredo Liverani, Gian Maria Santi, Paola Papaleo, Francesca Napolitano, Christian Leon-Cardenas, Giovanni Trisolino, Paola Zarantonello, et al.

    This experimental study defines the usage of a computer-aided surgical simulation process that is effective, safe, user-friendly, and low-cost, that achieves a detailed and realistic representation of the anatomical region of interest. The chosen tools for this purpose are state-of-the-art Computer Aided Design (CAD) software for mechanical design, and are the fundamental application dedicated to parametric modeling. These tools support different work environments, each one is for a specific type of modeling, and they allow the simulation of surgery. The result will be a faithful representation of the anatomical part both before and after the surgical procedure, screening all the intermediate phases. The doctor will assess different lines of action according to the results, then he will communicate them to the engineer who, consequently, will correct the antisymmetric issue and regenerate the model. Exact measurements of the mutual positions of the various components, skeletal and synthetic, can be achieved; all the osteosynthesis tools, necessary for the surgeon, can be included in the project according to different types of fracture to perfectly match the morphology of the bone to be treated. The method has been tested on seven clinical cases of different complexity and nature and the results of the simulations have been found to be of great effectiveness in the phase of diagnosis and of preoperative planning for the doctors and surgeons; therefore, allowing a lower risk medical operation with a better outcome. This work delivers experimental results in line with theoretical research findings in detail; moreover, full experimental and/or methodical details are provided, so that outcomes could be obtained.


  • Open Access

    Outcomes of Temporary Hemiepiphyseal Stapling for Correcting Genu Valgum in Children with Multiple Osteochondromas: A Single Institution Study

    by Giovanni Trisolino, Manila Boarini, Marina Mordenti, Andrea Evangelista, Giovanni Gallone, Stefano Stallone, Paola Zarantonello, Diego Antonioli, Giovanni Luigi Di Gennaro, Stefano Stilli, et al.

    Background: Multiple osteochondromas is a rare skeletal disorder characterized by the presence of osteocartilaginous protrusions causing bony deformities, especially around the knee. Guided growth by temporary hemiepiphyseal stapling is the treatment of choice to correct the deformity by modulating the residual physeal growth of the lower limbs. Although this procedure is increasingly practiced, inconclusive evidence exists regarding its effectiveness in children with multiple osteochondromas. The study aims to compare the outcomes of temporary hemiepiphyseal stapling for correcting genu valgum in children with multiple osteochondromas vs. idiopathic cases. Methods: In this retrospective cohort study, we included patients admitted at a single institution from 2008 to 2018. A total of 97 children (77 idiopathic, 20 multiple osteochondromas) were enclosed, accounting for 184 limbs treated by temporary hemiepiphyseal stapling. We investigated if children with multiple osteochondromas had a similar successful rate of correction, rate of complications, and correction velocity compared to children with idiopathic genu valgum. Results: Overall, 151 limbs (82%) achieved complete correction or overcorrection, with idiopathic cases having a significantly higher rate of success compared to pathologic cases (88% vs. 55%; p < 0.001). In addition, multiple osteochondromas children sustained a higher rate of major complications (p = 0.021) and showed significantly lower correction velocity (p = 0.029). Conclusion: Temporary hemiepiphyseal stapling is effective in both idiopathic and multiple osteochondromas children, although the latter often achieved incomplete correction, had a higher risk of complications, and required a longer time of stapling. We suggest to anticipate the timing of intervention; otherwise, children with multiple osteochondromas and severe valgus deformity, approaching skeletal maturity, could undergo combined femoral and tibial stapling.


  • Open Access

    Neglected Fractures of the Lateral Humeral Condyle in Children; Which Treatment for Which Condition?

    by Giovanni Trisolino, Diego Antonioli, Giovanni Gallone, Stefano Stallone, Paola Zarantonello, Piergiuseppe Tanzi, Eleonora Olivotto, Luca Stilli, Giovanni Luigi Di Gennaro, Stefano Stilli

    Background: Neglected fractures of the lateral humeral condyle (LHC) are misdiagnosed or insufficiently treated fractures, presenting later than 3 weeks after injury. The management of neglected LHC fractures in children remains controversial. Methods: Twenty-seven children were included in this retrospective study. Charts and medical records were investigated for demographics, time interval between injury and treatment, and type of treatment. Baseline radiographs were assessed for fracture grading and displacement. Final radiographs were investigated for bone healing, avascular necrosis, elbow deformities and growth disturbances. Complications were classified by the Clavien–Dindo–Sink (CDS) system. Outcomes were assessed according to the Dhillon Score (DhiS) and Mayo Elbow Performance Score (MEPS). Results: The mean time from injury to presentation was 27 months. Treatments included nonoperative management (6 patients), “in-situ” fixation (7 patients), open reduction and internal fixation (11 patients) and corrective osteotomy (3 patients). The mean follow-up was 7 years (range: 2–16). Overall, we observed complications in 16 patients (59%); six complications were considered major (22%) and occurred in Weiss Grade 3 fractures, with lateral displacement ≥5 mm. At the latest follow-up, pain and functional scores improved in 23 of 27 patients (85%). Mean MEPS increased from an average of 62 points preoperatively to 98 points postoperatively, while mean DhiS improved on average from 5 to 8 points. CDS score and time interval between injury and treatment were independent predictors of MEPS and DhiS. Conclusion: Our study describes outcomes from a cohort of children undergoing different treatments for neglected LHC fractures. Prolonged time interval between injury and treatment and perioperative major complications negatively impacted the treatment outcomes. Our findings strengthen the requirement for widely agreed guidelines of surgical management in neglected LHC fractures.


  • Open Access

    Good Subjective Outcomes, Stable Knee and High Return to Sport after Tibial Eminence Avulsion Fracture in Children

    by Stefano Stallone, Filippo Selleri, Giovanni Trisolino, Alberto Grassi, Luca Macchiarola, Marina Magnani, Eleonora Olivotto, Stefano Zaffagnini, Stefano Stilli, Fabio Catani

    Avulsion fracture of the tibial spine (TSA) is uncommon in children, although its incidence is increasing with the earlier practice of competitive sport activities. This study aims to report mid to long term outcomes in children who sustained a TSA, with a special focus on a return to sport activities. Skeletally immature patients with a TSA, treated in two orthopedic hospitals, were evaluated for range of motion and knee laxity using KT1000, KiRA and Rolimeter. The pediatric International Knee Documentation Committee score (Pedi-IKDC) and the Hospital for Special Surgery pediatric Functional Activity Brief Scale (Pedi-FABS) questionnaires were recorded during the latest visit. Forty-two children were included. Twenty-six were treated nonoperatively and 16 underwent surgery. At a mean follow-up of 6.9 ± 3.6 years, 36 patients completed the questionnaires and 23 patients were tested with arthrometers. Among them, 96% had normal knee laxity. The Pedi-IKDC score averaged 96.4 ± 5.7 points, while the mean Pedi-FABS was 22.2 ± 5.9 points, without statistically significant differences between groups. Twenty-eight patients (78%) returned to their previous level of sport activity (eight amateur, 13 competitive, seven elite athletes). Eight patients (22%) quit sport, mostly because of re-injury fear. If properly treated, pediatric TSAs achieve a high rate of successful healing, with complete restoration of knee stability and an early return to sport activities.


  • Open Access

    Computer-Aided Surgical Simulation for Correcting Complex Limb Deformities in Children

    by Leonardo Frizziero, Gian Maria Santi, Alfredo Liverani, Francesca Napolitano, Paola Papaleo, Elena Maredi, Giovanni Luigi Di Gennaro, Paola Zarantonello, Stefano Stallone, Stefano Stilli, et al.

    This work aims to present an in-house low-cost computer-aided simulation (CASS) process that was recently implemented in the preoperative planning of complex osteotomies for limb deformities in children. Five patients admitted to the Unit of Paediatric Orthopaedics and Traumatology from April 2018 to December 2019, for correcting congenital or post-traumatic limb deformities were included in the study. Three-dimensional (3D) digital models were generated from Computed Tomography (CT) scans, using free open-source software, and the surgery was planned and simulated starting from the 3D digital model. 3D printed sterilizable models were fabricated using a low-cost 3D printer, and animations of the operation were generated with the aim to accurately explain the operation to parents. All procedures were successfully planned using our CASS method and the 3D printed models were used during the operation, improving the understanding of the severely abnormal bony anatomy. The surgery was precisely reproduced according to CASS and the deformities were successfully corrected in four cases, while in one case, the intraoperative intentional undersizing of the bone osteotomy produced an incomplete correction of a congenital forearm deformity. Our study describes the application of a safe, effective, user-friendly, and low-cost CASS process in paediatric orthopaedics (PO) surgery. We are convinced that our study will stimulate the widespread adoption of this technological innovation in routine clinical practice for the treatment of rare congenital and post-traumatic limb deformities during childhood.


  • Open Access

    Paediatric Orthopaedic Surgery with 3D Printing: Improvements and Cost Reduction

    by Leonardo Frizziero, Gian Maria Santi, Alfredo Liverani, Valentina Giuseppetti, Giovanni Trisolino, Elena Maredi, Stefano Stilli

    This paper presents a a novel alghorithm of diagnosis and treatment of rigid flatfoot due to tarsal coalition. It introduces a workflow based on 3D printed models, that ensures more efficiency, not only by reducing costs and time, but also by improving procedures in the preoperative clinical phase. Since this paper concerns the development of a new methodology that integrates both engineering and medical fields, it highlights symmetry. An economic comparison is made between the traditional method and the innovative one; the results demonstrate a reduction in costs with the latter. The current, traditional method faces critical issues in diagnosing the pathologies of a limb (such as the foot) and taking decisions for further treatment of the same limb. The proposed alternative methodology thus uses new technologies that are part of the traditional workflow, only replacing the most obsolete ones. In fact, it is increasingly becoming necessary to introduce new technologies in orthopedics, as in other areas of medicine, to offer improved healthcare services for patients. Similar clinical treatments can be performed using the aforementioned technologies, offering greater effectiveness, more simplicity of approach, shorter times, and lower costs. An important technology that fits into this proposed methodology is 3D printing.


  • Open Access

    New Methodology for Diagnosis of Orthopedic Diseases through Additive Manufacturing Models

    by Leonardo Frizziero, Alfredo Liverani, Giampiero Donnici, Francesco Osti, Marco Neri, Elena Maredi, Giovanni Trisolino, Stefano Stilli

    Our purpose is to develop the preoperative diagnosis stage for orthopedic surgical treatments using additive manufacturing technology. Our methods involve fast implementations of an additive manufactured bone model, converted from CAT data, through appropriate software use. Then, additive manufacturing of the formed surfaces through special 3D-printers. With the structural model redesigned and printed in three dimensions, the surgeon is able to look at the printed bone and he can handle it because the model perfectly reproduces the real one upon which he will operate. We found that additive manufacturing models can precisely characterize the anatomical structures of fractures or lesions. The studied practice helps the surgeon to provide a complete preoperative valuation and a correct surgery, with minimized duration and risks. This structural model is also an effective device for communication between doctor and patient.


  • Open Access

    CT Conversion Workflow for Intraoperative Usage of Bony Models: From DICOM Data to 3D Printed Models

    by Francesco Osti, Gian Maria Santi, Marco Neri, Alfredo Liverani, Leonardo Frizziero, Stefano Stilli, Elena Maredi, Paola Zarantonello, Giovanni Gallone, Stefano Stallone, et al.

    This paper presents the application of a low-cost 3D printing technology in pre-operative planning and intra-operative decision-making. Starting from Computed Tomography (CT) scans, we were able to reconstruct a 3D model of the area of interest with a very simple and rapid workflow, using open-source software and an entry level 3D printer. The use of High Temperature Poly-Lactic Acid (HTPLA) by ProtoPasta allowed fabricating sterilizable models, which could be used within the surgical field. We believe that our method is an appealing alternative to high-end commercial products, being superior for cost and speed of production. It could be advantageous especially for small and less affluent hospitals that could produce customized sterilizable tools with little investment and high versatility.


  • Top Cited Papers
    Open Access

    Diagnosis, treatment and prevention of pediatric obesity: consensus position statement of the Italian Society for Pediatric Endocrinology and Diabetology and the Italian Society of Pediatrics

    by Giuliana Valerio, Claudio Maffeis, Giuseppe Saggese, Maria Amalia Ambruzzi, Antonio Balsamo, Simonetta Bellone, Marcello Bergamini, Sergio Bernasconi, Gianni Bona, Valeria Calcaterra, et al.

    The Italian Consensus Position Statement on Diagnosis, Treatment and Prevention of Obesity in Children and Adolescents integrates and updates the previous guidelines to deliver an evidence based approach to the disease. The following areas were reviewed: (1) obesity definition and causes of secondary obesity; (2) physical and psychosocial comorbidities; (3) treatment and care settings; (4) prevention. The main novelties deriving from the Italian experience lie in the definition, screening of the cardiometabolic and hepatic risk factors and the endorsement of a staged approach to treatment. The evidence based efficacy of behavioral intervention versus pharmacological or surgical treatments is reported. Lastly, the prevention by promoting healthful diet, physical activity, sleep pattern, and environment is strongly recommended since the intrauterine phase.