Alan C. Hansen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Alan C. Hansen has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Qin Zhang
7 shared publicationsWenqiao Yuan
Dept. of Agricultural and Biological Engineering University of Illinois at Urbana‐Champaign 360 AESB, 1304 W. Pennsylvania Ave. 61801 Urbana IL
4 shared publicationsPeter W. L. Lyne
2 shared publicationsRobert H. Hornbaker
2 shared publicationsZhongchao Tan
Department of Mechanical & Manufacturing Engineering University of Calgary T2N 1N4 Calgary Alberta Canada
2 shared publicationsTimothy A. Wilcox
1 shared publication
Latest Publications
- 15 November 2013
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Engine Durability Evaluation with E-Diesel
- 15 November 2013
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Engine Durability Evaluation with E-Diesel
- 1 March 2005
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 82 (3) , 195-199
Temperature‐dependent kinematic viscosity of selected biodiesel fuels and blends with diesel fuel
The kinematic viscosities of four biodiesel fuels—two natural soybean oil methyl esters, one genetically modified soybean oil methyl ester, and one yellow grease methyl ester—and their 75, 50, and 25% blends with No. 2 diesel fuel were measured in the temperature range from 20 to 100°C in steps of 20°C. The measurements indicated that all these fuels had viscosity‐temperature relationships similar to No. 2 diesel fuel, which followed the Vogel equation as expected. A weighted semilog blending equation was developed in which the mass‐based kinematic viscosity of the individual components was used to compute the mixture viscosity. A weight factor of 1.08 was applied to biodiesel fuel to account for its effect on the mixture viscosity. The average absolute deviation achieved with this method was 2.1%, which was better than the uncorrected mass average blending equation that had an average absolute deviation of 4.5%. The relationship between the viscosity and the specific gravity of biodiesel fuels was studied. A method that could estimate the viscosity from the specific gravity of biodiesel fuel was developed. The average absolute deviation for all the samples using this method was 2.7%. The accuracy of this method was comparable to the weighted mass‐based semilog blending equation.
- 1 March 2005
- Published by Wiley in Journal of the American Oil Chemists' Society
- Vol. 82 (3) , 195-199
Temperature‐dependent kinematic viscosity of selected biodiesel fuels and blends with diesel fuel
The kinematic viscosities of four biodiesel fuels—two natural soybean oil methyl esters, one genetically modified soybean oil methyl ester, and one yellow grease methyl ester—and their 75, 50, and 25% blends with No. 2 diesel fuel were measured in the temperature range from 20 to 100°C in steps of 20°C. The measurements indicated that all these fuels had viscosity‐temperature relationships similar to No. 2 diesel fuel, which followed the Vogel equation as expected. A weighted semilog blending equation was developed in which the mass‐based kinematic viscosity of the individual components was used to compute the mixture viscosity. A weight factor of 1.08 was applied to biodiesel fuel to account for its effect on the mixture viscosity. The average absolute deviation achieved with this method was 2.1%, which was better than the uncorrected mass average blending equation that had an average absolute deviation of 4.5%. The relationship between the viscosity and the specific gravity of biodiesel fuels was studied. A method that could estimate the viscosity from the specific gravity of biodiesel fuel was developed. The average absolute deviation for all the samples using this method was 2.7%. The accuracy of this method was comparable to the weighted mass‐based semilog blending equation.
- 1 January 2005
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Modeling And Analysis Of Row Crop Harvesting Patterns By Combines
Studies have shown that mechanical harvesting systems are becoming increasingly more complex, and that with the increasing capacity and performance, there are opportunities to increase productivity of these systems. Technologies such as auto-tracking open up the potential to provide some level of automation and achieve higher productivity. One area that can be addressed is the harvesting path pattern. A number of options exist for executing one or more of these patterns in the field. In addition the turns at the end of the crop rows play a significant role in the total time spent in the field. Adding more than one combine to the harvesting operation in a field contributes further to the complexity of these systems and widens the choices that the operations manager has to make in organizing and conducting the harvesting of a field. The purpose of this study was to analyze path patterns for a single combine with particular emphasis on turns in the headland of the field. The turns are mathematically described in order to be able to create a model that can be used to make some comparisons between different harvesting scenarios. The model was verified with field data collected from harvesting corn. Varying corn head size and the number of lands had a big impact on the total idle time related to turning in the headland.
- 1 January 2005
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Modeling And Analysis Of Row Crop Harvesting Patterns By Combines
Studies have shown that mechanical harvesting systems are becoming increasingly more complex, and that with the increasing capacity and performance, there are opportunities to increase productivity of these systems. Technologies such as auto-tracking open up the potential to provide some level of automation and achieve higher productivity. One area that can be addressed is the harvesting path pattern. A number of options exist for executing one or more of these patterns in the field. In addition the turns at the end of the crop rows play a significant role in the total time spent in the field. Adding more than one combine to the harvesting operation in a field contributes further to the complexity of these systems and widens the choices that the operations manager has to make in organizing and conducting the harvesting of a field. The purpose of this study was to analyze path patterns for a single combine with particular emphasis on turns in the headland of the field. The turns are mathematically described in order to be able to create a model that can be used to make some comparisons between different harvesting scenarios. The model was verified with field data collected from harvesting corn. Varying corn head size and the number of lands had a big impact on the total idle time related to turning in the headland.
- 1 January 2005
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Modeling of NOx Emissions of Biodiesel Fuels
- 1 January 2005
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
Modeling of NOx Emissions of Biodiesel Fuels
- 1 January 2001
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
ON-FARM EVALUATION OF DIESEL FUEL OXYGENATED WITH ETHANOL
- 1 January 2001
- Published by American Society of Agricultural and Biological Engineers (ASABE)
- p. 1
ON-FARM EVALUATION OF DIESEL FUEL OXYGENATED WITH ETHANOL