Prasanta Kumar Saikia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Prasanta Kumar Saikia has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Alok Kumar Das
Dibrugarh University
4 shared publications - Pranamika Borah
Thin Film Laboratory, Department of Physics, Dibrugarh University, Dibrugarh-786004, Assam, India
4 shared publications - Mridusmita Boruah
Thin Film Laboratory, Department of Physics, Dibrugarh University, Dibrugarh, India
3 shared publications - Saujanya Adhyapak3 shared publications
- Himanshu Sharma Pathok
Thin Film Laboratory, Department of Physics, Dibrugarh University, Dibrugarh, India
2 shared publications Jyotimoni Bora
2 shared publications
Latest Publications
- Open Access
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
Study the effect of bath temperature on structural, morphological, optical, and electrical properties of chemically grown Cd0.4Zn0.6S nanostructured thin films deposited at low deposition duration and concentration
Cd0.4Zn0.6S nanocrystalline thin films were synthesized on glass substrates using a cost-effective CBD technique by varying the deposition temperature from 40-90 °C. A comprehensive and systematic characterization of the structural, morphological, optical, and electrical properties of the deposited films was performed. The deposited films exhibited high optical transparency, with average transmittance values ranging from 75% to 90%. The optical band gap was found to vary between 2.54 and 2.79 eV. Among the studied samples, the film deposited at 40 °C exhibited superior overall properties, highlighting its potential as a low-cost material for solar cell and optoelectronic applications.
- 22 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessStudy the effect of bath temperature on structural, morphological, optical, and electrical properties of chemically grown Cd0.4Zn0.6S nanostructured thin films deposited at low deposition duration and concentration
Cd0.4Zn0.6S nanocrystalline thin films were synthesized on glass substrates using a cost-effective CBD technique by varying the deposition temperature from 40-90 °C. A comprehensive and systematic characterization of the structural, morphological, optical, and electrical properties of the deposited films was performed. The deposited films exhibited high optical transparency, with average transmittance values ranging from 75% to 90%. The optical band gap was found to vary between 2.54 and 2.79 eV. Among the studied samples, the film deposited at 40 °C exhibited superior overall properties, highlighting its potential as a low-cost material for solar cell and optoelectronic applications.
- 9 January 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 726
Silver insertion: Exploring the impact of Ag doping on the optical and structural properties of ZnS nanostructured thin films
- 9 January 2026
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 726
Silver insertion: Exploring the impact of Ag doping on the optical and structural properties of ZnS nanostructured thin films
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 122503
Effect of Cu Doping on Chemically Deposited Cd 1−x Zn x S Thin Films: Synthesis, Structural, Morphological, Optical, and Electrical Investigations for Photovoltaic Applications
This work investigates the influence of Cu doping on the structural, morphological, optical, and electrical properties of Cd 1−x Zn x S nanocrystalline thin films synthesized by the Chemical Bath Deposition (CBD) technique. A comprehensive correlation among the observed properties has also been discussed. XRD analysis confirms a hexagonal phase structure with a preferred (002) orientation and crystallite sizes ranging from 2.15 to 3.16 nm. Morphological analysis reveals smooth and homogeneous surfaces, with grain size distributions between 63.39–251.55 nm for both undoped and Cu-doped films (2%–10% v/v). EDX results verify the presence of Cd, Zn, S, and the incorporated Cu dopant. Optical studies show transmittance values between 60%–90%, while absorption data indicate a bandgap variation from 3.15 to 2.76 eV with increasing Cu content. Electrical measurements exhibit a linear current–voltage relationship, with conductivity on the order of 10 –4 S cm −1 . Overall, this study provides a detailed comparison of undoped and Cu-doped Cd 1−x Zn x S thin films, highlighting their potential suitability as window layers in photovoltaic applications.
- 1 December 2025
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 172 (12) , 122503
Effect of Cu Doping on Chemically Deposited Cd 1−x Zn x S Thin Films: Synthesis, Structural, Morphological, Optical, and Electrical Investigations for Photovoltaic Applications
This work investigates the influence of Cu doping on the structural, morphological, optical, and electrical properties of Cd 1−x Zn x S nanocrystalline thin films synthesized by the Chemical Bath Deposition (CBD) technique. A comprehensive correlation among the observed properties has also been discussed. XRD analysis confirms a hexagonal phase structure with a preferred (002) orientation and crystallite sizes ranging from 2.15 to 3.16 nm. Morphological analysis reveals smooth and homogeneous surfaces, with grain size distributions between 63.39–251.55 nm for both undoped and Cu-doped films (2%–10% v/v). EDX results verify the presence of Cd, Zn, S, and the incorporated Cu dopant. Optical studies show transmittance values between 60%–90%, while absorption data indicate a bandgap variation from 3.15 to 2.76 eV with increasing Cu content. Electrical measurements exhibit a linear current–voltage relationship, with conductivity on the order of 10 –4 S cm −1 . Overall, this study provides a detailed comparison of undoped and Cu-doped Cd 1−x Zn x S thin films, highlighting their potential suitability as window layers in photovoltaic applications.
- 20 November 2025
- Published by Elsevier in Thin Solid Films
- Vol. 832
Effect of Mn concentration on the structural, morphological, optical, and electrical properties of Cd1-xMnxS thin films
- 20 November 2025
- Published by Elsevier in Thin Solid Films
- Vol. 832
Effect of Mn concentration on the structural, morphological, optical, and electrical properties of Cd1-xMnxS thin films
- 11 October 2025
- Published by Springer Nature
- p. 23-33
Elucidation of the Preparation and Structural, Optical, and Morphological Features of Chemically Deposited CdSSe Thin Films
- 11 October 2025
- Published by Springer Nature
- p. 23-33
Elucidation of the Preparation and Structural, Optical, and Morphological Features of Chemically Deposited CdSSe Thin Films
- 7 August 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (5)
Field-free Josephson diode effect in an Ising-superconductor/altermagnet/Ising-superconductor Josephson junction
- 7 August 2025
- Published by American Physical Society (APS) in Physical Review B
- Vol. 112 (5)
Field-free Josephson diode effect in an Ising-superconductor/altermagnet/Ising-superconductor Josephson junction
- 21 January 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (7) , 1648-1657
A starch–polyvinyl alcohol polymer film-based on-site sensor for ammonia: a cost effective day-to-day technique for monitoring fish and meat spoilage
Ammonia or biogenic amines released by protein degradation during food spoilage have various ill effects on human health and the environment. Herein, an economical colorimetric bisphenol-based sensor was developed from inexpensive reagents and a simple synthetic method for detecting ammonia and monitoring food spoilage. The slightest addition of NH3 significantly changed the absorption of BP, which was reflected in the detection limit value for NH3 (7.89 × 10−7 M). The film-based sensor developed by immobilizing BP onto a starch–polyvinyl alcohol (PVA) matrix enabled both the rapid and visual onsite detection of ammonia and the determination of the RGB contents using a digital application. The blue content of the film linearly changed with the extent of the spoilage of fish and meat samples. This linear change enabled the film-based sensor to act as an excellent food quality indicator for hourly food quality monitoring. The aerial reversibility of the film empowered its use for many cycles without the use of any reagents.
- 21 January 2025
- Published by Royal Society of Chemistry (RSC) in Analytical Methods
- Vol. 17 (7) , 1648-1657
A starch–polyvinyl alcohol polymer film-based on-site sensor for ammonia: a cost effective day-to-day technique for monitoring fish and meat spoilage
Ammonia or biogenic amines released by protein degradation during food spoilage have various ill effects on human health and the environment. Herein, an economical colorimetric bisphenol-based sensor was developed from inexpensive reagents and a simple synthetic method for detecting ammonia and monitoring food spoilage. The slightest addition of NH3 significantly changed the absorption of BP, which was reflected in the detection limit value for NH3 (7.89 × 10−7 M). The film-based sensor developed by immobilizing BP onto a starch–polyvinyl alcohol (PVA) matrix enabled both the rapid and visual onsite detection of ammonia and the determination of the RGB contents using a digital application. The blue content of the film linearly changed with the extent of the spoilage of fish and meat samples. This linear change enabled the film-based sensor to act as an excellent food quality indicator for hourly food quality monitoring. The aerial reversibility of the film empowered its use for many cycles without the use of any reagents.
- 18 October 2024
- Published by Elsevier in Optical Materials
- Vol. 157
Optimization of deposition time on structural, morphological, and optical properties of Cd1-xZnxS nanocrystalline thin films
- 18 October 2024
- Published by Elsevier in Optical Materials
- Vol. 157
Optimization of deposition time on structural, morphological, and optical properties of Cd1-xZnxS nanocrystalline thin films
- 25 August 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 694
Chemically deposited nanocrystalline ZnMgS thin film: The impact of deposition time on its structural and optical properties
- 25 August 2024
- Published by Elsevier in Physica B: Condensed Matter
- Vol. 694
Chemically deposited nanocrystalline ZnMgS thin film: The impact of deposition time on its structural and optical properties