Sandra Regina B. R. Sella
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sandra Regina B. R. Sella has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Ricardo Soccol
Department of Bioprocess Engineering and Biotechnology, Federal University of Paraná (UFPR), Curitiba, Brazil
6 shared publications - Luciana Porto de Souza Vandenberghe
Federal University of Paraná, Department of Bioprocess Engineering and Biotechnology, Centro Politécnico, 81531-980 Curitiba, Paraná, Brazil
6 shared publications João Carlos Minozzo
Parana State Department of Health
4 shared publicationsBelquis P. Guizelini
Federal University of Parana
3 shared publications- Ciro Alberto Oliveira Ribeiro
Laboratório de Toxicologia Celular, Departamento de Biologia Celular, Universidade Federal do Paraná, Curitiba CEP 81531-970, PR, Brazil
2 shared publications - Luis Felipe M. Figueiredo
Departamento de Bioquímica-Imunologia, Instituto de Ciências Biológicas, Universidade Federal de Minas Gerais, CP 486, CEP 31270-901, Belo Horizonte, MG, Brazil; Centro de Produção e Pesquisa de Imunobiológicos (CPPI), Piraquara, PR, Brazil
2 shared publications
Latest Publications
- Top Cited Papers
- 9 February 2021
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 41 (3) , 355-369
Bacillus subtilis natto as a potential probiotic in animal nutrition
The growing global demand for animal products and processed meat has created a challenge for the livestock sector to enhance animal productivity without compromising product quality. The restriction of antibiotics in animal feeds as growth promoters makes the use of probiotics a natural and safe alternative to obtain functional foods that provide animal health and quality and to maintain food safety for consumers. To incorporate these additives into the diet, detailed studies are required, in which in vitro and in vivo assays are used to prove the efficacy and to ensure the safety of probiotic candidate strains. Studies on the use of Bacillus subtilis natto as a spore-forming probiotic bacterium in animal nutrition have shown no hazardous effects and have demonstrated the effectiveness of its use as a probiotic, mainly due to its proven antimicrobial, anti-inflammatory, antioxidant, enzymatic, and immunomodulatory activity. This review summarizes the recent scientific background on the probiotic effects of B. subtilis natto in animal nutrition. It focuses on its safety assessment, host-associated efficacy, and industrial requirements.
- 9 February 2021
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 41 (3) , 355-369
Top Cited PapersBacillus subtilis natto as a potential probiotic in animal nutrition
The growing global demand for animal products and processed meat has created a challenge for the livestock sector to enhance animal productivity without compromising product quality. The restriction of antibiotics in animal feeds as growth promoters makes the use of probiotics a natural and safe alternative to obtain functional foods that provide animal health and quality and to maintain food safety for consumers. To incorporate these additives into the diet, detailed studies are required, in which in vitro and in vivo assays are used to prove the efficacy and to ensure the safety of probiotic candidate strains. Studies on the use of Bacillus subtilis natto as a spore-forming probiotic bacterium in animal nutrition have shown no hazardous effects and have demonstrated the effectiveness of its use as a probiotic, mainly due to its proven antimicrobial, anti-inflammatory, antioxidant, enzymatic, and immunomodulatory activity. This review summarizes the recent scientific background on the probiotic effects of B. subtilis natto in animal nutrition. It focuses on its safety assessment, host-associated efficacy, and industrial requirements.
- 1 December 2014
- Published by Elsevier in Microbiological Research
- Vol. 169 (12) , 931-939
Life cycle and spore resistance of spore-forming Bacillus atrophaeus
- 1 December 2014
- Published by Elsevier in Microbiological Research
- Vol. 169 (12) , 931-939
Life cycle and spore resistance of spore-forming Bacillus atrophaeus
- 1 February 2013
- Published by Springer Nature in Biotechnology and Bioprocess Engineering
- Vol. 18 (1) , 75-87
Soybean molasses-based bioindicator system for monitoring sterilization process: Designing and performance evaluation
- 1 February 2013
- Published by Springer Nature in Biotechnology and Bioprocess Engineering
- Vol. 18 (1) , 75-87
Soybean molasses-based bioindicator system for monitoring sterilization process: Designing and performance evaluation
- 23 August 2012
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 97 (3) , 1031-1042
Glycerol-based sterilization bioindicator system from Bacillus atrophaeus: development, performance evaluation, and cost analysis
The development of new value-added applications for glycerol is of worldwide interest because of the environmental and economic problems that may be caused by an excess of glycerol generated from biodiesel production. A novel use of glycerol as a major substrate for production of a low-cost sterilization biological indicator system (BIS; spores on a carrier plus a recovery medium) was investigated. A sequential experimental design strategy was applied for product development and optimization. The proposed recovery medium enables germination and outgrowth of heat-damaged spores, promoting a D 160 °C value of 6.6 ± 0.1 min. Bacillus atrophaeus spores production by solid-state fermentation reached a 2.3 ± 1.2 × 108 CFU/g dry matter. Sporulation kinetics results allowed this process to be restricted in 48 h. Germination kinetics demonstrated the visual identification of nonsterile BIS within 24 h. Performance evaluation of the proposed BIS against dry-heat and ethylene oxide sterilization showed compliance with the regulatory requirements. Cost breakdowns were from 41.8 (quality control) up to 72.8 % (feedstock). This is the first report on sterilization BIS production that uses glycerol as a sole carbon source, with significant cost reduction and the profitable use of a biodiesel byproduct.
- 23 August 2012
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 97 (3) , 1031-1042
Glycerol-based sterilization bioindicator system from Bacillus atrophaeus: development, performance evaluation, and cost analysis
The development of new value-added applications for glycerol is of worldwide interest because of the environmental and economic problems that may be caused by an excess of glycerol generated from biodiesel production. A novel use of glycerol as a major substrate for production of a low-cost sterilization biological indicator system (BIS; spores on a carrier plus a recovery medium) was investigated. A sequential experimental design strategy was applied for product development and optimization. The proposed recovery medium enables germination and outgrowth of heat-damaged spores, promoting a D 160 °C value of 6.6 ± 0.1 min. Bacillus atrophaeus spores production by solid-state fermentation reached a 2.3 ± 1.2 × 108 CFU/g dry matter. Sporulation kinetics results allowed this process to be restricted in 48 h. Germination kinetics demonstrated the visual identification of nonsterile BIS within 24 h. Performance evaluation of the proposed BIS against dry-heat and ethylene oxide sterilization showed compliance with the regulatory requirements. Cost breakdowns were from 41.8 (quality control) up to 72.8 % (feedstock). This is the first report on sterilization BIS production that uses glycerol as a sole carbon source, with significant cost reduction and the profitable use of a biodiesel byproduct.
- 22 April 2012
- Published by Springer Nature in Archives of Microbiology
- Vol. 194 (10) , 815-825
Relations between phenotypic changes of spores and biofilm production by Bacillus atrophaeus ATCC 9372 growing in solid-state fermentation
- 22 April 2012
- Published by Springer Nature in Archives of Microbiology
- Vol. 194 (10) , 815-825
Relations between phenotypic changes of spores and biofilm production by Bacillus atrophaeus ATCC 9372 growing in solid-state fermentation
- 23 July 2011
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 93 (1) , 151-158
Development of a low-cost sterilization biological indicator using Bacillus atrophaeus by solid-state fermentation
The production of biological indicators involving bacterial sporulation and multi-step downstream processes has been described. The goal of the present work was to use fermented material as the final product in a biological indicator, thereby reducing processing steps and costs. The performance of three different inexpensive supports (vermiculite, sand, and sugarcane bagasse) was assessed by determining Bacillus atrophaeus sporulation during solid-state fermentation and by assessing the direct use of the fermentation products in the subsequent steps of the process. All three supports allowed spore production of between 107 and 109 CFU g−1. Sand proved to be the best inert support enabling the direct use of the fermented product due to its easy homogenization, filling properties, and compatibility with recovery medium. Bacterial adhesion to the sand surface was supported by biofilm formation. The resistance to sterilization of the dried fermentation product was evaluated. For dry-heat resistance (160°C), the D value was 6.6 min, and for ethylene oxide resistance (650 mg/L), the D value was 6.5 min. The cost reduction of this process was at least 48%. No previous studies have been published on the application of sand as a support in solid-state fermentation for the production of biological indicators.
- 23 July 2011
- Published by Springer Nature in Applied Microbiology and Biotechnology
- Vol. 93 (1) , 151-158
Development of a low-cost sterilization biological indicator using Bacillus atrophaeus by solid-state fermentation
The production of biological indicators involving bacterial sporulation and multi-step downstream processes has been described. The goal of the present work was to use fermented material as the final product in a biological indicator, thereby reducing processing steps and costs. The performance of three different inexpensive supports (vermiculite, sand, and sugarcane bagasse) was assessed by determining Bacillus atrophaeus sporulation during solid-state fermentation and by assessing the direct use of the fermentation products in the subsequent steps of the process. All three supports allowed spore production of between 107 and 109 CFU g−1. Sand proved to be the best inert support enabling the direct use of the fermented product due to its easy homogenization, filling properties, and compatibility with recovery medium. Bacterial adhesion to the sand surface was supported by biofilm formation. The resistance to sterilization of the dried fermentation product was evaluated. For dry-heat resistance (160°C), the D value was 6.6 min, and for ethylene oxide resistance (650 mg/L), the D value was 6.5 min. The cost reduction of this process was at least 48%. No previous studies have been published on the application of sand as a support in solid-state fermentation for the production of biological indicators.
- 22 April 2008
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 151 (2-3) , 380-392
Selection and Optimization of Bacillus atrophaeus Inoculum Medium and its Effect on Spore Yield and Thermal Resistance
Bacillus atrophaeus’s spores are used as biological indicators to monitor sterilization processes and as a Bacillus anthracis surrogate in the development and validation of biosafety methods. The regular use of biological indicators to evaluate the efficiency of sterilization processes is a legal requirement for health services. However, its high cost hinders its widespread use. Aiming at developing a cost-effective inoculum medium, soybean molasses and nutrient-supplemented vinasse were evaluated for their effectiveness in solid-state fermentation (SSF). In biomass production, the results demonstrated that all tested compositions favor growth by providing the nutritional demands of the microorganism. Optimum casein peptone and soybean molasses concentration (1.0%, 2.5%, or 4.0%) was determined by a 2(2–0) factorial experimental design. The results have showed a positive influence of peptone on biomass production. In order to define peptone final concentration (4.0% or 6.0%), a 22 factorial experimental design was used. An optimized medium containing 4.0% soybean molasses and 4.0% casein peptone was similar in performance to a synthetic control medium (tryptone soy broth) in dry-heat thermal-resistant spore production by SSF. An experiment performed under optimum SSF conditions resulted in 1.9 × 1010 CFU g−1 dry matter with D 160 °C = 5.2 ± 0.2 min.
- 22 April 2008
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 151 (2-3) , 380-392
Selection and Optimization of Bacillus atrophaeus Inoculum Medium and its Effect on Spore Yield and Thermal Resistance
Bacillus atrophaeus’s spores are used as biological indicators to monitor sterilization processes and as a Bacillus anthracis surrogate in the development and validation of biosafety methods. The regular use of biological indicators to evaluate the efficiency of sterilization processes is a legal requirement for health services. However, its high cost hinders its widespread use. Aiming at developing a cost-effective inoculum medium, soybean molasses and nutrient-supplemented vinasse were evaluated for their effectiveness in solid-state fermentation (SSF). In biomass production, the results demonstrated that all tested compositions favor growth by providing the nutritional demands of the microorganism. Optimum casein peptone and soybean molasses concentration (1.0%, 2.5%, or 4.0%) was determined by a 2(2–0) factorial experimental design. The results have showed a positive influence of peptone on biomass production. In order to define peptone final concentration (4.0% or 6.0%), a 22 factorial experimental design was used. An optimized medium containing 4.0% soybean molasses and 4.0% casein peptone was similar in performance to a synthetic control medium (tryptone soy broth) in dry-heat thermal-resistant spore production by SSF. An experiment performed under optimum SSF conditions resulted in 1.9 × 1010 CFU g−1 dry matter with D 160 °C = 5.2 ± 0.2 min.