Xiaoli Zhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaoli Zhan has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Fengqiu Chen
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
13 shared publicationsQinghua Zhang
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
8 shared publications- Qinghua Zhang
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310030, PR China
6 shared publications Yitao Yu
Department of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
3 shared publicationsHailong Liu
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou, China
2 shared publicationsJiankun Hu
College of Chemical and Biological Engineering, Zhejiang University, Hangzhou 310027, China
2 shared publications
Latest Publications
- 3 February 2022
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 213, 112392
Squid inspired elastomer marine coating with efficient antifouling strategies: Hydrophilized defensive surface and lower modulus
- 3 February 2022
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 213, 112392
Squid inspired elastomer marine coating with efficient antifouling strategies: Hydrophilized defensive surface and lower modulus
- 1 September 2021
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 625
Biodegradable polyurethane based clay composite and their anti-biofouling properties
- 1 September 2021
- Published by Elsevier in Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Vol. 625
Biodegradable polyurethane based clay composite and their anti-biofouling properties
- 1 March 2017
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 56 (10) , 2754-2763
Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties
- 1 March 2017
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 56 (10) , 2754-2763
Fabrication of a Highly Stable Superhydrophobic Surface with Dual-Scale Structure and Its Antifrosting Properties
- 29 July 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (78) , 74340-74348
Facile fabrication of highly omniphobic and self-cleaning surfaces based on water mediated fluorinated nanosilica aggregation
Liquid repellent surfaces are being promisingly applied in industry and our daily lives. Herein we report a facile and effective sol–gel method for fabricating hybrid coatings with highly omniphobic and self-cleaning properties. The fluorinated hybrid nanocomposite was synthesized via one-step hydrolytic condensation of a nanosilica sol, methyltriethoxysilane (MTES) and 3-[(perfluorohexyl sulfonyl) amino] propyltriethoxysilane (HFTES). The solvent mixture of water and 2-propanol surrounding the hydrophobic nanosilica is a key factor in the control of nanoparticle aggregation, which leads to the formation of a multi-scale roughness surface with different wettabilities. The fluorinated nano-sol can be easily coated on various hard and soft substrates by spraying or dipping methods, endowing the substrate with omniphobicity to different organic liquids and biofoulings especially solidified egg white. Furthermore, the designed coating shows excellent self-cleaning and anti-adhesion properties in various harsh environments such as high temperature, acid and alkaline treatment and oil contamination. Owing to the facile method and its remarkable omniphobic abilities, the fluorinated hybrid coatings can be expected to have potential industry applications in a material system requiring robust antifouling, protein resistance and self-cleaning functions.
- 29 July 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (78) , 74340-74348
Facile fabrication of highly omniphobic and self-cleaning surfaces based on water mediated fluorinated nanosilica aggregation
Liquid repellent surfaces are being promisingly applied in industry and our daily lives. Herein we report a facile and effective sol–gel method for fabricating hybrid coatings with highly omniphobic and self-cleaning properties. The fluorinated hybrid nanocomposite was synthesized via one-step hydrolytic condensation of a nanosilica sol, methyltriethoxysilane (MTES) and 3-[(perfluorohexyl sulfonyl) amino] propyltriethoxysilane (HFTES). The solvent mixture of water and 2-propanol surrounding the hydrophobic nanosilica is a key factor in the control of nanoparticle aggregation, which leads to the formation of a multi-scale roughness surface with different wettabilities. The fluorinated nano-sol can be easily coated on various hard and soft substrates by spraying or dipping methods, endowing the substrate with omniphobicity to different organic liquids and biofoulings especially solidified egg white. Furthermore, the designed coating shows excellent self-cleaning and anti-adhesion properties in various harsh environments such as high temperature, acid and alkaline treatment and oil contamination. Owing to the facile method and its remarkable omniphobic abilities, the fluorinated hybrid coatings can be expected to have potential industry applications in a material system requiring robust antifouling, protein resistance and self-cleaning functions.
- 4 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (95) , 77508-77517
Microstructure and antibacterial performance of functionalized polyurethane based on polysiloxane tethered cationic biocides
Multifunctional polyurethane based on polysiloxane tethered cationic biocides was designed for fouling resistance and antibacterial objectives. Quaternary ammonium salt (QAS) functionalized hydroxy-terminated polysiloxanes (PQMS) with different compositions were synthesized by hydrolytic polycondensation and subsequent quaternization. Then, a series of antibacterial polyurethane copolymers (PQMS–PU) with PQMS and PPG as soft segments were prepared by two-step condensation methods. GPC, FTIR and 1H-NMR were employed to analyze the chemical structural and composition. The surface migrations of polysiloxane segment tethered QAS groups and the distribution of N+ on the surface were quantitatively characterized by XPS. The microphase morphology and wettability properties of the copolymer films were investigated by AFM, TEM and dynamic contact angle tests. The migration of the biocide groups to the surface caused by the microphase separation between polysiloxane soft segments and hard segments was determined. The quantitative relationships of the polysiloxane segments and QAS group distribution on the surface with the wettability and antibacterial activity of the copolymer films were demonstrated. Within the designed range, the obtained copolymers exhibited very low surface free energy and excellent antibacterial activity towards Escherichia coli, which was of great environmental friendliness and industrial interest for textile and marine coating application.
- 4 September 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (95) , 77508-77517
Microstructure and antibacterial performance of functionalized polyurethane based on polysiloxane tethered cationic biocides
Multifunctional polyurethane based on polysiloxane tethered cationic biocides was designed for fouling resistance and antibacterial objectives. Quaternary ammonium salt (QAS) functionalized hydroxy-terminated polysiloxanes (PQMS) with different compositions were synthesized by hydrolytic polycondensation and subsequent quaternization. Then, a series of antibacterial polyurethane copolymers (PQMS–PU) with PQMS and PPG as soft segments were prepared by two-step condensation methods. GPC, FTIR and 1H-NMR were employed to analyze the chemical structural and composition. The surface migrations of polysiloxane segment tethered QAS groups and the distribution of N+ on the surface were quantitatively characterized by XPS. The microphase morphology and wettability properties of the copolymer films were investigated by AFM, TEM and dynamic contact angle tests. The migration of the biocide groups to the surface caused by the microphase separation between polysiloxane soft segments and hard segments was determined. The quantitative relationships of the polysiloxane segments and QAS group distribution on the surface with the wettability and antibacterial activity of the copolymer films were demonstrated. Within the designed range, the obtained copolymers exhibited very low surface free energy and excellent antibacterial activity towards Escherichia coli, which was of great environmental friendliness and industrial interest for textile and marine coating application.
- 19 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (14)
Preparation, surface properties, and antibacterial activity of a poly(dimethyl siloxane) network containing a quaternary ammonium salt side chain
To obtain a copolymer network with low surface energy and antibacterial properties, a series of hydroxyl‐terminated poly(dimethyl siloxane)s (PDMSs) modified by a quaternary ammonium salt (QAS) side chain was synthesized via hydrolytic polycondensation and quaternization. The structures of the intermediate and final products were confirmed by Fourier transform infrared spectroscopy, 1H‐NMR, and gel permeation chromatography. The results show that each step was successfully carried out, and objective products were obtained. The modified PDMSs were crosslinked with a commercial polyisocyanate to obtain cured QAS‐modified PDMS coatings. The target functional coatings exhibited excellent antibacterial performance with a low surface energy. When the molar content of QAS in PDMS was varied from 10 to 30%, the critical surface energy of the coatings remained in the range 24.05–26.88 mN/m; this indicated that the coatings had minimal adhesion with fouling according to the Baier curve. The bactericidal tests showed that the antibacterial activity was independent of the PDMS molecular weight but was closely correlated with the QAS content in PDMS. The bactericidal rate of the coatings to Escherichia coli and Staphylococcus aureus was higher than 97% when the molar content of QAS in PDMS was above 20%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41725.
- 19 December 2014
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 132 (14)
Preparation, surface properties, and antibacterial activity of a poly(dimethyl siloxane) network containing a quaternary ammonium salt side chain
To obtain a copolymer network with low surface energy and antibacterial properties, a series of hydroxyl‐terminated poly(dimethyl siloxane)s (PDMSs) modified by a quaternary ammonium salt (QAS) side chain was synthesized via hydrolytic polycondensation and quaternization. The structures of the intermediate and final products were confirmed by Fourier transform infrared spectroscopy, 1H‐NMR, and gel permeation chromatography. The results show that each step was successfully carried out, and objective products were obtained. The modified PDMSs were crosslinked with a commercial polyisocyanate to obtain cured QAS‐modified PDMS coatings. The target functional coatings exhibited excellent antibacterial performance with a low surface energy. When the molar content of QAS in PDMS was varied from 10 to 30%, the critical surface energy of the coatings remained in the range 24.05–26.88 mN/m; this indicated that the coatings had minimal adhesion with fouling according to the Baier curve. The bactericidal tests showed that the antibacterial activity was independent of the PDMS molecular weight but was closely correlated with the QAS content in PDMS. The bactericidal rate of the coatings to Escherichia coli and Staphylococcus aureus was higher than 97% when the molar content of QAS in PDMS was above 20%. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41725.
- 30 April 2014
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 53 (19) , 8026-8034
Synthesis and Performance of Novel Fluorinated Acrylate Polymers: Preparation and Reactivity of Short Perfluoroalkyl Group Containing Monomers
- 30 April 2014
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 53 (19) , 8026-8034
Synthesis and Performance of Novel Fluorinated Acrylate Polymers: Preparation and Reactivity of Short Perfluoroalkyl Group Containing Monomers
- 15 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (4) , 2557-2565
Interfacially confined RAFT miniemulsion copolymerization of styrene and butadiene
In this study, ammonolyzed poly(styrene‐alt‐maleic anhydride) terminated with dithioester group can be self‐assembled into an amphiphilic macro‐reversible addition‐fragmentation chain transfer (RAFT) agent, and RAFT group will be located in the interface of oil and water. RAFT polymerization of styrene (S) and butadiene (B) will be confined in the interface. The main work is to study the effect of degree of aminolysis, reaction temperature, and ratio of S/B on the polymerization kinetics and living characters. The experimental results revealed that aminolysis of dithioester group would lead to retardation and loss of living characters under higher degree of aminolysis. Interfacially confined RAFT miniemulsion polymerizations were of relatively good controlled/living characters under lower degree of aminolysis before gelation. Increase of reaction temperature and ratio of S/B will accelerate the formation of gelation. Finally, styrene/butadiene copolymer nanoparticles with uniform particle size were formed, and because of microphase segregation “core–shell” morphology with polybutadiene core and polystyrene shell was seen obviously. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 15 May 2012
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 127 (4) , 2557-2565
Interfacially confined RAFT miniemulsion copolymerization of styrene and butadiene
In this study, ammonolyzed poly(styrene‐alt‐maleic anhydride) terminated with dithioester group can be self‐assembled into an amphiphilic macro‐reversible addition‐fragmentation chain transfer (RAFT) agent, and RAFT group will be located in the interface of oil and water. RAFT polymerization of styrene (S) and butadiene (B) will be confined in the interface. The main work is to study the effect of degree of aminolysis, reaction temperature, and ratio of S/B on the polymerization kinetics and living characters. The experimental results revealed that aminolysis of dithioester group would lead to retardation and loss of living characters under higher degree of aminolysis. Interfacially confined RAFT miniemulsion polymerizations were of relatively good controlled/living characters under lower degree of aminolysis before gelation. Increase of reaction temperature and ratio of S/B will accelerate the formation of gelation. Finally, styrene/butadiene copolymer nanoparticles with uniform particle size were formed, and because of microphase segregation “core–shell” morphology with polybutadiene core and polystyrene shell was seen obviously. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013
- 29 November 2011
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (5) , 4249-4258
Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate
In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
- 29 November 2011
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 124 (5) , 4249-4258
Comparison of styrene reversible addition–fragmentation chain‐transfer polymerization in a miniemulsion system stabilized by ammonlysis poly(styrene‐alt‐maleic anhydride) and sodium dodecyl sulfate
In this study, we conducted the reversible addition–fragmentation chain‐transfer (RAFT) polymerization of styrene (St) in a miniemulsion system stabilized by two different stabilizers, ammonlysis poly(styrene‐alt‐maleic anhydride) (SMA) and sodium dodecyl sulfate (SDS), with identical reaction conditions. The main objective was to compare the polymerization kinetics, living character, latex stability, and particle morphology. The macro‐RAFT agent used in both systems was SMA, which was obtained by RAFT solution polymerization mediated by 1‐phenylethyl phenyldithioacetate. The experimental results show that the St RAFT miniemulsion polymerization stabilized by SDS exhibited a better living character than that stabilized by ammonlysis SMA. The final latices were very stable in two systems, but different stabilizers had an obvious effect on the polymerization kinetics, living character, and particle morphology. All of the particles obtained by RAFT miniemulsion polymerization stabilized by SDS were solid, but an obvious core–shell structure was observed in the miniemulsion system stabilized by ammonlysis SMA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012
- 11 February 2011
- Published by Wiley in Polymer Engineering & Science
- Vol. 51 (6) , 1041-1050
Synthesis of triblock copolymer having alternating structures and kinetics study on RAFT‐mediated bulk, miniemulsion and seed miniemulsion polymerizations
We have conducted reversible addition‐fragmentation chain transfer (RAFT) polymerizations of styrene (St) and maleic anhydride (MAh) and n ‐butyl acrylate (BA) to produce a well‐defined triblock copolymer having alternating structure, P(St‐alt‐MAh)‐b‐PSt‐b‐PBA, via bulk, miniemulsion and seed miniemulsion polymerizations. The polymerization kinetics and living characters were investigated. The results followed by gel permeation chromatography (GPC) showed that bulk and miniemulsion polymerizations exhibited controlled nature such as narrow polydispersity index (PDI), controlled molecular weight, and first‐order polymerization kinetics, whereas triblock copolymer owned a rather wider PDI. Comparison of GPC RI and UV traces revealed that alternating copolymer and diblock copolymer have a very high percentage of living chains. For seed miniemulsion polymerization, when the molecular weight of triblock copolymer is more than 36,000 g/mol, the formation of homopolymer of BA resulted in broadening of PDI. 1 H NMR method was used to identify the compositions of block copolymers. Differential scanning calorimetry analysis showed that the copolymers exhibited distinct glass temperatures. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers
- 11 February 2011
- Published by Wiley in Polymer Engineering & Science
- Vol. 51 (6) , 1041-1050
Synthesis of triblock copolymer having alternating structures and kinetics study on RAFT‐mediated bulk, miniemulsion and seed miniemulsion polymerizations
We have conducted reversible addition‐fragmentation chain transfer (RAFT) polymerizations of styrene (St) and maleic anhydride (MAh) and n ‐butyl acrylate (BA) to produce a well‐defined triblock copolymer having alternating structure, P(St‐alt‐MAh)‐b‐PSt‐b‐PBA, via bulk, miniemulsion and seed miniemulsion polymerizations. The polymerization kinetics and living characters were investigated. The results followed by gel permeation chromatography (GPC) showed that bulk and miniemulsion polymerizations exhibited controlled nature such as narrow polydispersity index (PDI), controlled molecular weight, and first‐order polymerization kinetics, whereas triblock copolymer owned a rather wider PDI. Comparison of GPC RI and UV traces revealed that alternating copolymer and diblock copolymer have a very high percentage of living chains. For seed miniemulsion polymerization, when the molecular weight of triblock copolymer is more than 36,000 g/mol, the formation of homopolymer of BA resulted in broadening of PDI. 1 H NMR method was used to identify the compositions of block copolymers. Differential scanning calorimetry analysis showed that the copolymers exhibited distinct glass temperatures. POLYM. ENG. SCI., 2011. © 2011 Society of Plastics Engineers