Nail Gabsalyamovich Musakaev
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Nail Gabsalyamovich Musakaev has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Stanislav Leonidovich Borodin
Tyumen Branch of the Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Sciences
36 shared publications - Marat Kamilovich Khasanov
Sterlitamak Branch of Ufa University of Science and Technology, Sterlitamak, Russia
27 shared publications - Denis Sergeevich Belskikh
Tyumen Branch of the Khristianovich Institute of Theoretical and Applied Mechanics, Siberian Branch of the Russian Academy of Sciences, Tyumen, Russia
13 shared publications - Maksim V. Stolpovskii
Ufa State Petroleum Technological University, Ufa, Russia
4 shared publications - Vladislav Shaikhulagzamovich Shagapov
Mavlutov Institute of Mechanics, Ufa Federal Research Center, Russian Academy of Sciences, Ufa, Russia
4 shared publications V. Sh. Shagapov
Sterlitamak State Pedagogical Academy
3 shared publications
Latest Publications
- Open Access
- 27 September 2025
- Published by Georesursy LLC in Georesursy
- Vol. 27 (3) , 121-129
Estimation of the parameters of carbon dioxide injection into a saturated porous reservoir with heterogeneous permeability in the presence of hydrate formation
One of the effective methods of combating the increase in the concentration of carbon dioxide in the atmosphere is its sequestration in porous media in the solid gas hydrate form. The unique properties of gas hydrates, such as their high gas capacity, low permeability and natural stability, make them an attractive option for long-term disposal of carbon dioxide. In the context of considering the problem of organizing geological gas hydrate storages of carbon dioxide, a mathematical model is written down that allows a theoretical study of the process of carbon dioxide hydrate formation during its injection into a reservoir whose pores are initially saturated with methane and water. The proposed mathematical model takes into account zonal heterogeneity of a porous reservoir, the flow in it in the presence of phase transformations (hydrate formation and solubility of carbon dioxide in water) of the gas (СН 4 and/or СО 2 ) and liquid (water and dissolved CO 2 ) phases, heat transfer from the considered region of a reservoir to the surrounding rocks; the hydrate formation process is considered as an equilibrium phase transition. Calculation equations for the studied process are presented and numerical solutions of the problem are constructed, describing the distribution of parameters (temperature, pressure, phase saturations) in a reservoir. It has been shown by calculations that when CO 2 is injected into a reservoir, several characteristic zones can form in it, differing in the composition of the fluids saturating them. It has been demonstrated that it is necessary to take into account such factors as heat released during phase transitions, the Joule-Thomson effect, and heat exchange between the porous reservoir and its surrounding rocks when describing the temperature field in the reservoir formed when carbon dioxide is injected into it. The results of computational experiments are presented and analyzed when placing an injection well in a high- or low-permeability zone of a porous reservoir. The conducted numerical study showed that for the organization of effective gas hydrate storage of carbon dioxide, porous media with sufficiently high permeability values are required.
- 27 September 2025
- Published by Georesursy LLC in Georesursy
- Vol. 27 (3) , 121-129
Open AccessEstimation of the parameters of carbon dioxide injection into a saturated porous reservoir with heterogeneous permeability in the presence of hydrate formation
One of the effective methods of combating the increase in the concentration of carbon dioxide in the atmosphere is its sequestration in porous media in the solid gas hydrate form. The unique properties of gas hydrates, such as their high gas capacity, low permeability and natural stability, make them an attractive option for long-term disposal of carbon dioxide. In the context of considering the problem of organizing geological gas hydrate storages of carbon dioxide, a mathematical model is written down that allows a theoretical study of the process of carbon dioxide hydrate formation during its injection into a reservoir whose pores are initially saturated with methane and water. The proposed mathematical model takes into account zonal heterogeneity of a porous reservoir, the flow in it in the presence of phase transformations (hydrate formation and solubility of carbon dioxide in water) of the gas (СН 4 and/or СО 2 ) and liquid (water and dissolved CO 2 ) phases, heat transfer from the considered region of a reservoir to the surrounding rocks; the hydrate formation process is considered as an equilibrium phase transition. Calculation equations for the studied process are presented and numerical solutions of the problem are constructed, describing the distribution of parameters (temperature, pressure, phase saturations) in a reservoir. It has been shown by calculations that when CO 2 is injected into a reservoir, several characteristic zones can form in it, differing in the composition of the fluids saturating them. It has been demonstrated that it is necessary to take into account such factors as heat released during phase transitions, the Joule-Thomson effect, and heat exchange between the porous reservoir and its surrounding rocks when describing the temperature field in the reservoir formed when carbon dioxide is injected into it. The results of computational experiments are presented and analyzed when placing an injection well in a high- or low-permeability zone of a porous reservoir. The conducted numerical study showed that for the organization of effective gas hydrate storage of carbon dioxide, porous media with sufficiently high permeability values are required.
- 24 June 2025
- Published by Tyumen State University in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
- Vol. 11 (1(41))
Прогнозирование накопления жидкости в промысловых газопроводах на основе машинного обучения
Накопление жидкости в промысловых газопроводах является достаточно встречающейся проблемой, которая нарушает стабильность потока. В процессе эксплуатации, под действием рельефа местности и условий работы происходит постепенное отложение воды и газоконденсата с восходящих участков трубопровода на нисходящие, что, в свою очередь, снижает эффективность транспортировки, вызывает рост потерь давления, пульсации давления, способствует протеканию процессов коррозии и гидратообразования. Из-за сложности многофазного течения механизм накопления жидкости до сих пор остается спорным. В настоящее время, большинство методик, предсказывающих накопление, являются полуэмпирическими и не обладают достаточной точностью. Развитие машинного обучения и технологий искусственного интеллекта предоставляют широкий спектр возможностей для анализа, выявления потенциальных зависимостей и предсказания поведения данных. Целью данной работы является получение многофакторной модели прогнозирования накопления жидкости в промысловых газопроводах с высокой способностью к обобщению и прогнозу. Основываясь на статистических данных эксплуатации трубопроводов нефтегазоконденсатных месторождений Западной и Восточной Сибири, был создан массив данных для расчета параметров в динамическом симуляторе неустановившихся многофазных потоков, необходимых для проведения машинного обучения. После предварительной обработки данных было проведено обучение модели по алгоритмам с учителем и проведено их дальнейшее сравнение, включая методы: логистической регрессии (LR), линейного дискриминантного анализа (LDA), K-ближайших соседей (KNN), дерева принятия решений (CART), наивного байесовского классификатора (NB), линейных опорных векторов (LSVC), опорных векторов (SVC), «бэггинга» (BG), «случайного леса» (RF), классификатора экстремально рандомизированных деревьев (ET), адаптивного «бустинга» (AB), градиентного «бустинга» (GB), экстремального градиентного «бустинга» (XGB) и многослойного перцептрона (MLP), наиболее оптимальными из которых оказались алгоритмы «дерево принятия решений» и «K ближайших соседей». Данные модели были оптимизированы методами «кросс-валидации», затем обучены на тренировочных данных и протестированы. В ходе работы было установлено множество различных комбинаций работы трубопровода без накопления, определена степень важности различных параметров на протекание процесса накопления. Разработанная модель может стать полезным средством для анализа и локализации процесса накопления жидкости, обеспечивая более упрощенное и всестороннее прогнозирование по сравнению с другими моделями. Liquid accumulation in field gas pipelines is a common problem that disrupts flow stability. In the process of operation, under the influence of terrain and working conditions, there is a gradual deposition of water and gas condensate from upstream to downstream sections of the pipeline, which in turn reduces the efficiency of transportation, causes an increase in pressure losses, pressure pulsations, promotes corrosion and hydrate formation processes. Due to the complexity of multiphase flow, the mechanism of fluid accumulation is still controversial. Currently, most of the techniques that predict accumulation are semi-empirical and do not have sufficient accuracy. Advances in machine learning and artificial intelligence technologies provide a wide range of possibilities for analyzing, identifying potential dependencies and predicting data behavior. The aim of this paper is to obtain a multifactor prediction model for liquid accumulation in field gas pipelines with high generalization and prediction ability. Based on the statistical data of pipeline operation in oil and gas condensate fields of Western and Eastern Siberia, a data set was created to calculate the parameters in the dynamic simulator...
- 24 June 2025
- Published by Tyumen State University in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
- Vol. 11 (1(41))
Прогнозирование накопления жидкости в промысловых газопроводах на основе машинного обучения
Накопление жидкости в промысловых газопроводах является достаточно встречающейся проблемой, которая нарушает стабильность потока. В процессе эксплуатации, под действием рельефа местности и условий работы происходит постепенное отложение воды и газоконденсата с восходящих участков трубопровода на нисходящие, что, в свою очередь, снижает эффективность транспортировки, вызывает рост потерь давления, пульсации давления, способствует протеканию процессов коррозии и гидратообразования. Из-за сложности многофазного течения механизм накопления жидкости до сих пор остается спорным. В настоящее время, большинство методик, предсказывающих накопление, являются полуэмпирическими и не обладают достаточной точностью. Развитие машинного обучения и технологий искусственного интеллекта предоставляют широкий спектр возможностей для анализа, выявления потенциальных зависимостей и предсказания поведения данных. Целью данной работы является получение многофакторной модели прогнозирования накопления жидкости в промысловых газопроводах с высокой способностью к обобщению и прогнозу. Основываясь на статистических данных эксплуатации трубопроводов нефтегазоконденсатных месторождений Западной и Восточной Сибири, был создан массив данных для расчета параметров в динамическом симуляторе неустановившихся многофазных потоков, необходимых для проведения машинного обучения. После предварительной обработки данных было проведено обучение модели по алгоритмам с учителем и проведено их дальнейшее сравнение, включая методы: логистической регрессии (LR), линейного дискриминантного анализа (LDA), K-ближайших соседей (KNN), дерева принятия решений (CART), наивного байесовского классификатора (NB), линейных опорных векторов (LSVC), опорных векторов (SVC), «бэггинга» (BG), «случайного леса» (RF), классификатора экстремально рандомизированных деревьев (ET), адаптивного «бустинга» (AB), градиентного «бустинга» (GB), экстремального градиентного «бустинга» (XGB) и многослойного перцептрона (MLP), наиболее оптимальными из которых оказались алгоритмы «дерево принятия решений» и «K ближайших соседей». Данные модели были оптимизированы методами «кросс-валидации», затем обучены на тренировочных данных и протестированы. В ходе работы было установлено множество различных комбинаций работы трубопровода без накопления, определена степень важности различных параметров на протекание процесса накопления. Разработанная модель может стать полезным средством для анализа и локализации процесса накопления жидкости, обеспечивая более упрощенное и всестороннее прогнозирование по сравнению с другими моделями. Liquid accumulation in field gas pipelines is a common problem that disrupts flow stability. In the process of operation, under the influence of terrain and working conditions, there is a gradual deposition of water and gas condensate from upstream to downstream sections of the pipeline, which in turn reduces the efficiency of transportation, causes an increase in pressure losses, pressure pulsations, promotes corrosion and hydrate formation processes. Due to the complexity of multiphase flow, the mechanism of fluid accumulation is still controversial. Currently, most of the techniques that predict accumulation are semi-empirical and do not have sufficient accuracy. Advances in machine learning and artificial intelligence technologies provide a wide range of possibilities for analyzing, identifying potential dependencies and predicting data behavior. The aim of this paper is to obtain a multifactor prediction model for liquid accumulation in field gas pipelines with high generalization and prediction ability. Based on the statistical data of pipeline operation in oil and gas condensate fields of Western and Eastern Siberia, a data set was created to calculate the parameters in the dynamic simulator...
- 1 May 2025
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 46 (5) , 2183-2191
Numerical Study of Non-Isothermal Filtration Process Considering the CO${}_{\mathbf{2}}$–CH${}_{\mathbf{4}}$ Replacement in Methane HydrateCurrently an interest in the prospects of gas production and primarily production of methane from natural gas hydrate deposits is growing worldwide. It is necessary to develop and calculate methods of such production to uninterruptedly switch from traditional extracted gas (reserves are estimated for approximately 50 years) to gas from gas hydrate deposits (reserves are estimated for at least 250 years) in the future, which will allow the extraction of natural gas for a sufficiently long time. A number of researchers consider the replacement of methane in its hydrate with carbon dioxide as a promising method for extracting methane from gas hydrate deposits. In this regard, the paper considers the process of injecting carbon dioxide into a formation initially saturated with methane and its hydrate in a one-dimensional axisymmetric approximation considering the process of CO\({}_{2}\)–CH\({}_{4}\) replacement in the gas hydrate. Equations for calculating the values of the main parameters of the non-isothermal filtration process in the formation are presented. Numerical solutions for the considered problem in the form of distributions in the reservoir of pressure values, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates are constructed. Conclusions are made about the influence of various parameters on the process of non-isothermal filtration and the process of CH\({}_{4}\)–CO\({}_{2}\) replacement in gas hydrate in the reservoir.- 1 May 2025
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 46 (5) , 2183-2191
Numerical Study of Non-Isothermal Filtration Process Considering the CO${}_{\mathbf{2}}$–CH${}_{\mathbf{4}}$ Replacement in Methane HydrateCurrently an interest in the prospects of gas production and primarily production of methane from natural gas hydrate deposits is growing worldwide. It is necessary to develop and calculate methods of such production to uninterruptedly switch from traditional extracted gas (reserves are estimated for approximately 50 years) to gas from gas hydrate deposits (reserves are estimated for at least 250 years) in the future, which will allow the extraction of natural gas for a sufficiently long time. A number of researchers consider the replacement of methane in its hydrate with carbon dioxide as a promising method for extracting methane from gas hydrate deposits. In this regard, the paper considers the process of injecting carbon dioxide into a formation initially saturated with methane and its hydrate in a one-dimensional axisymmetric approximation considering the process of CO\({}_{2}\)–CH\({}_{4}\) replacement in the gas hydrate. Equations for calculating the values of the main parameters of the non-isothermal filtration process in the formation are presented. Numerical solutions for the considered problem in the form of distributions in the reservoir of pressure values, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates are constructed. Conclusions are made about the influence of various parameters on the process of non-isothermal filtration and the process of CH\({}_{4}\)–CO\({}_{2}\) replacement in gas hydrate in the reservoir.- 1 May 2025
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 46 (5) , 2192-2200
Numerical Study of Carbon Dioxide Injection into a Saturated Porous Reservoir with Non-Uniform Permeability
Growing global industrialization and overexploitation of fossil fuels have led to carbon dioxide emissions, which have become one of the causes of rising global temperature and environmental problems. Therefore, there is an urgent need to reduce the concentration of carbon dioxide in the Earth’s atmosphere. One of the promising ways to reduce the amount of CO\({}_{2}\) in the atmosphere is its capture and creation of underground gas hydrate storage facilities for carbon dioxide utilization. Evaluation of the efficiency of geological gas hydrate storage of carbon dioxide requires theoretical study of the problem of carbon dioxide conservation in porous reservoirs. In this regard, in the work, in a two-dimensional axisymmetric approximation, mathematical modeling of the process of gas hydrate formation during the injection of carbon dioxide into a zonally heterogeneous porous reservoir saturated in the initial state with methane and water is performed. The model takes into account the presence of phase transitions (hydrate formation, solubility of carbon dioxide in water), water and gas filtration, heat exchange of the considered porous reservoir with the surrounding rocks. The influence of the parameters of the injected carbon dioxide and the duration of its injection on the distributions of temperature, pressure, and phases saturations in the porous reservoir is considered. Calculations are performed for the location of an injection well in the reservoir zone with a higher permeability value.- 1 May 2025
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 46 (5) , 2192-2200
Numerical Study of Carbon Dioxide Injection into a Saturated Porous Reservoir with Non-Uniform Permeability
Growing global industrialization and overexploitation of fossil fuels have led to carbon dioxide emissions, which have become one of the causes of rising global temperature and environmental problems. Therefore, there is an urgent need to reduce the concentration of carbon dioxide in the Earth’s atmosphere. One of the promising ways to reduce the amount of CO\({}_{2}\) in the atmosphere is its capture and creation of underground gas hydrate storage facilities for carbon dioxide utilization. Evaluation of the efficiency of geological gas hydrate storage of carbon dioxide requires theoretical study of the problem of carbon dioxide conservation in porous reservoirs. In this regard, in the work, in a two-dimensional axisymmetric approximation, mathematical modeling of the process of gas hydrate formation during the injection of carbon dioxide into a zonally heterogeneous porous reservoir saturated in the initial state with methane and water is performed. The model takes into account the presence of phase transitions (hydrate formation, solubility of carbon dioxide in water), water and gas filtration, heat exchange of the considered porous reservoir with the surrounding rocks. The influence of the parameters of the injected carbon dioxide and the duration of its injection on the distributions of temperature, pressure, and phases saturations in the porous reservoir is considered. Calculations are performed for the location of an injection well in the reservoir zone with a higher permeability value.- 1 December 2024
- Published by Pleiades Publishing Ltd in Journal of Applied and Industrial Mathematics
- Vol. 18 (4) , 744-758
Mathematical Modeling of Carbon Dioxide Injection into a Reservoir with Methane and Water Taking into Account the Formation of Carbon Dioxide Hydrate
An increase in the concentration of carbon dioxide in the atmosphere caused by the combustion of fuels has a negative impact on the current biosphere of the Earth. One way to get rid of excess carbon dioxide in the atmosphere is to capture and store it. Various methods for long-term storage of carbon dioxide are proposed, including in various geological formations in gas hydrate form, since gas hydrates have a number of unique properties, for example, it is possible to stably store a sufficiently large amount of gas in a small volume at a relatively low pressure. One of the objects for creating underground carbon dioxide storage facilities are depleted natural gas deposits, since they are well studied, the characteristics of the deposits, their geometric dimensions are known, and there are drilled wells. To study the patterns of the formation process of an underground gas hydrate carbon dioxide storage, the article presents a mathematical model of the process of carbon dioxide injection into a zonally heterogeneous porous reservoir, initially saturated with methane and water, accompanied by the formation of gas hydrate. Unlike previous works, the mathematical model additionally takes into account a number of factors: the solubility of carbon dioxide in water, zonal heterogeneity of a reservoir, heat exchange of the reservoir with the surrounding rocks impermeable to matter, filtration of water and gas. Numerical solutions of the problem were constructed to describe the distribution of parameters (pressure, temperature, carbon dioxide hydrate saturation) in the reservoir.
- 1 December 2024
- Published by Pleiades Publishing Ltd in Journal of Applied and Industrial Mathematics
- Vol. 18 (4) , 744-758
Mathematical Modeling of Carbon Dioxide Injection into a Reservoir with Methane and Water Taking into Account the Formation of Carbon Dioxide Hydrate
An increase in the concentration of carbon dioxide in the atmosphere caused by the combustion of fuels has a negative impact on the current biosphere of the Earth. One way to get rid of excess carbon dioxide in the atmosphere is to capture and store it. Various methods for long-term storage of carbon dioxide are proposed, including in various geological formations in gas hydrate form, since gas hydrates have a number of unique properties, for example, it is possible to stably store a sufficiently large amount of gas in a small volume at a relatively low pressure. One of the objects for creating underground carbon dioxide storage facilities are depleted natural gas deposits, since they are well studied, the characteristics of the deposits, their geometric dimensions are known, and there are drilled wells. To study the patterns of the formation process of an underground gas hydrate carbon dioxide storage, the article presents a mathematical model of the process of carbon dioxide injection into a zonally heterogeneous porous reservoir, initially saturated with methane and water, accompanied by the formation of gas hydrate. Unlike previous works, the mathematical model additionally takes into account a number of factors: the solubility of carbon dioxide in water, zonal heterogeneity of a reservoir, heat exchange of the reservoir with the surrounding rocks impermeable to matter, filtration of water and gas. Numerical solutions of the problem were constructed to describe the distribution of parameters (pressure, temperature, carbon dioxide hydrate saturation) in the reservoir.
- 1 August 2024
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 58 (4) , 1398-1401
Improving the Efficiency of Surface-Active Substances for Fluid Removal from the Bottom Hole of a Gas Well
The results of experimental research of foamy gas–liquid flows, aimed at increasing productivity of gas wells with high liquid content in the production are presented. The study is carried out on the basis of the developed experimental facility and the authors’ methodology of research of stationary gas–liquid flow, providing data on the flow characteristics at different values of pressure, different liquid volume flow rates, and different gas volume flow rates. It is shown that there are optimal values of the surface-active-substance concentration at which the minimum pressure drop between the inlet and outlet sections of the lifting column is achieved, and which depend on the pressure at the inlet to the experimental facility.
- 1 August 2024
- Published by Pleiades Publishing Ltd in Theoretical Foundations of Chemical Engineering
- Vol. 58 (4) , 1398-1401
Improving the Efficiency of Surface-Active Substances for Fluid Removal from the Bottom Hole of a Gas Well
The results of experimental research of foamy gas–liquid flows, aimed at increasing productivity of gas wells with high liquid content in the production are presented. The study is carried out on the basis of the developed experimental facility and the authors’ methodology of research of stationary gas–liquid flow, providing data on the flow characteristics at different values of pressure, different liquid volume flow rates, and different gas volume flow rates. It is shown that there are optimal values of the surface-active-substance concentration at which the minimum pressure drop between the inlet and outlet sections of the lifting column is achieved, and which depend on the pressure at the inlet to the experimental facility.
- 1 May 2024
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 45 (5) , 2103-2110
Methodology for Calculating the Parameters of Non-isothermal Filtration Considering the CO${}_{\mathbf{2}}$–CH${}_{\mathbf{4}}$ Replacement in Methane HydrateA mathematical model of non-isothermal filtration of methane, carbon dioxide and water is constructed based on the methods and equations of multiphase media mechanics considering the replacement of methane in the gas hydrate with carbon dioxide. The equations of the mathematical model and the methodology for their numerical solution are presented. The numerical solutions for one-dimensional plane-parallel approximation are constructed for the problem of injecting carbon dioxide into a reservoir initially saturated with methane and its hydrate. Those solutions describe the distributions in the reservoir of pressure, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates.
- 1 May 2024
- Published by Pleiades Publishing Ltd in Lobachevskii Journal of Mathematics
- Vol. 45 (5) , 2103-2110
Methodology for Calculating the Parameters of Non-isothermal Filtration Considering the CO${}_{\mathbf{2}}$–CH${}_{\mathbf{4}}$ Replacement in Methane HydrateA mathematical model of non-isothermal filtration of methane, carbon dioxide and water is constructed based on the methods and equations of multiphase media mechanics considering the replacement of methane in the gas hydrate with carbon dioxide. The equations of the mathematical model and the methodology for their numerical solution are presented. The numerical solutions for one-dimensional plane-parallel approximation are constructed for the problem of injecting carbon dioxide into a reservoir initially saturated with methane and its hydrate. Those solutions describe the distributions in the reservoir of pressure, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates.
- 1 January 2024
- Published by Tyumen State University in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
Improving the efficiency of modeling inflow to gas-condensate horizontal wells using an inflow profiling tool
The development of hydrocarbon deposits using horizontal wells makes it possible to achieve profitable flow rates with minimal depression and increase the oil recovery factor. Having launched and running a horizontal well, it is necessary to conduct field geophysical surveys to assess the condition of the wellbore and optimize development. But when conducting and interpreting such studies, difficulties may arise with the qualitative and quantitative determination of such an important indicator as the inflow profile, which may indicate the low information content of the study. The negative impact of this factor on the production of hydrocarbon raw materials can act as a significant reason for significant miscalculations in the development of hydrocarbon fields. This paper discusses the main reasons for the low information content of field geophysical surveys in wells with horizontal completion, as well as ways to improve the accuracy of survey data. The goal of the work is to create a digital tool for determining the profile of fluid inflow to gas horizontal production wells based on well barometry data, which can complement or replace mechanical flow metering, which is low-informative in many cases. A description of the calculation methodology is presented and the effectiveness of the created tool is verified based on real field data. Its effectiveness has been shown by calculation; the calculated pressure diagram has good convergence with field data, and the calculated flow rate also coincides with the actual flow rate. The risks and further improvements of the proposed tool are assessed.
- 1 January 2024
- Published by Tyumen State University in Tyumen State University Herald Physical and Mathematical Modeling Oil Gas Energy
Improving the efficiency of modeling inflow to gas-condensate horizontal wells using an inflow profiling tool
The development of hydrocarbon deposits using horizontal wells makes it possible to achieve profitable flow rates with minimal depression and increase the oil recovery factor. Having launched and running a horizontal well, it is necessary to conduct field geophysical surveys to assess the condition of the wellbore and optimize development. But when conducting and interpreting such studies, difficulties may arise with the qualitative and quantitative determination of such an important indicator as the inflow profile, which may indicate the low information content of the study. The negative impact of this factor on the production of hydrocarbon raw materials can act as a significant reason for significant miscalculations in the development of hydrocarbon fields. This paper discusses the main reasons for the low information content of field geophysical surveys in wells with horizontal completion, as well as ways to improve the accuracy of survey data. The goal of the work is to create a digital tool for determining the profile of fluid inflow to gas horizontal production wells based on well barometry data, which can complement or replace mechanical flow metering, which is low-informative in many cases. A description of the calculation methodology is presented and the effectiveness of the created tool is verified based on real field data. Its effectiveness has been shown by calculation; the calculated pressure diagram has good convergence with field data, and the calculated flow rate also coincides with the actual flow rate. The risks and further improvements of the proposed tool are assessed.
- 1 January 2024
- Published by Mavlyutov Institute of Mechanics in Multiphase Systems
- Vol. 19 (2) , 49-58
Mathematical modeling of the process of the injection of carbon dioxide into a formation containing methane and its hydrate
Recently, special attention is paid to the development of deposits of natural gas hydrates due to their wide distribution in nature and the large reserves of hydrocarbons contained in such deposits. The article discusses an innovative gas extraction method based on the injection of carbon dioxide into a gas hydrate formation. This technology makes it possible to accumulate greenhouse gases in solid gas hydrate form at very low economic costs, as well as solve the problem of natural gas extraction. A mathematical model of non-isothermal filtration of carbon dioxide in the gaseous state, methane and water is constructed based on methods and equations of mechanics of multiphase media considering the replacement of methane in the gas hydrate with carbon dioxide to obtain predictive calculations. The model additionally takes into account such important factors as filtration flow of water and gas, real gas properties, Joule–Thomson and adiabatic compression effects; the process of CH4 –CO2 replacement in gas hydrate is assumed to be equilibrium. The equations are presented to calculate the values of the main process parameters (pressure, temperature, mass fraction of gas phase components, phase saturations, etc.) in one-dimensional radial axisymmetric approximation. Discrete analogues of differential equations are written down and an algorithm for numerical solution of the proposed mathematical model is given. Calculation of saturation distributions of methane and carbon dioxide hydrates is carried out considering their phase equilibrium at current values of pressure, temperature and water saturation. Numerical solutions are constructed that describe the distributions of pressure, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates in the reservoir for the problem of injecting carbon dioxide into a reservoir initially saturated with methane and its hydrate.
- 1 January 2024
- Published by Mavlyutov Institute of Mechanics in Multiphase Systems
- Vol. 19 (2) , 49-58
Mathematical modeling of the process of the injection of carbon dioxide into a formation containing methane and its hydrate
Recently, special attention is paid to the development of deposits of natural gas hydrates due to their wide distribution in nature and the large reserves of hydrocarbons contained in such deposits. The article discusses an innovative gas extraction method based on the injection of carbon dioxide into a gas hydrate formation. This technology makes it possible to accumulate greenhouse gases in solid gas hydrate form at very low economic costs, as well as solve the problem of natural gas extraction. A mathematical model of non-isothermal filtration of carbon dioxide in the gaseous state, methane and water is constructed based on methods and equations of mechanics of multiphase media considering the replacement of methane in the gas hydrate with carbon dioxide to obtain predictive calculations. The model additionally takes into account such important factors as filtration flow of water and gas, real gas properties, Joule–Thomson and adiabatic compression effects; the process of CH4 –CO2 replacement in gas hydrate is assumed to be equilibrium. The equations are presented to calculate the values of the main process parameters (pressure, temperature, mass fraction of gas phase components, phase saturations, etc.) in one-dimensional radial axisymmetric approximation. Discrete analogues of differential equations are written down and an algorithm for numerical solution of the proposed mathematical model is given. Calculation of saturation distributions of methane and carbon dioxide hydrates is carried out considering their phase equilibrium at current values of pressure, temperature and water saturation. Numerical solutions are constructed that describe the distributions of pressure, temperature, mass concentrations of gas phase components and saturations of methane and carbon dioxide hydrates in the reservoir for the problem of injecting carbon dioxide into a reservoir initially saturated with methane and its hydrate.