Elias Brassitos
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Elias Brassitos has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Constantinos Mavroidis
Northeastern University
1 shared publication- Nader Jalili
Professor Fellow ASME Piezoactive Systems Laboratory, Department of Mechanical and Industrial Engineering, Northeastern University, Boston, MA 02115
1 shared publication - Nader Jalili
Department of Mechanical Engineering, Southern Methodist University, Dallas, TX 75205, USA
1 shared publication
Latest Publications
- 13 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 24 (4) , 1651-1661
Dynamic Model Development and Characterization of Gear Bearing Transmission Systems: Theory and Experiments
The Gear Bearing Drive (GBD) is a newly developed actuator concept based on NASA's high-reduction gear bearing technology and brushless outrunner motor technology. Compared to conventional precision drive systems such as harmonic drives, the GBD offers similar advantages such as high-torque in a compact assembly but with the potential of better stiffness characteristics and lower transmission friction and more predictable output speed response. In this paper, the open-loop behavior of a GBD prototype is experimentally characterized to obtain a dynamic model for its velocity/position response. Two analytical models for the transmission stiffness are developed using the bending flexure of gear-teeth and transmission geometry that accurately capture the stiffness characteristics. Finally, a sensitivity study is presented that reproduces the response of this transmission under various input and output loads. Analysis of the system dynamics suggests that the GBD behavior is dominated by linear dynamics that are characterized by finite friction dissipation and geometric errors in its gear mesh resulting from imperfect manufacturing. In addition, the transmission shows no unpredictable open-loop dynamics or transmission resonance within its speed range, making its closed-loop control problem a simple task.
- 13 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 24 (4) , 1651-1661
Dynamic Model Development and Characterization of Gear Bearing Transmission Systems: Theory and Experiments
The Gear Bearing Drive (GBD) is a newly developed actuator concept based on NASA's high-reduction gear bearing technology and brushless outrunner motor technology. Compared to conventional precision drive systems such as harmonic drives, the GBD offers similar advantages such as high-torque in a compact assembly but with the potential of better stiffness characteristics and lower transmission friction and more predictable output speed response. In this paper, the open-loop behavior of a GBD prototype is experimentally characterized to obtain a dynamic model for its velocity/position response. Two analytical models for the transmission stiffness are developed using the bending flexure of gear-teeth and transmission geometry that accurately capture the stiffness characteristics. Finally, a sensitivity study is presented that reproduces the response of this transmission under various input and output loads. Analysis of the system dynamics suggests that the GBD behavior is dominated by linear dynamics that are characterized by finite friction dissipation and geometric errors in its gear mesh resulting from imperfect manufacturing. In addition, the transmission shows no unpredictable open-loop dynamics or transmission resonance within its speed range, making its closed-loop control problem a simple task.
- Open Access
- 6 September 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 9 (6)
Design and Development of a Compact High-Torque Robotic Actuator for Space Mechanisms
Space robots require compact joint drive systems (JDSs), typically comprising of actuator, transmission, joint elements that can deliver high torques through stiff mechanical ports. Today's conventional space drive systems are made from off-the-shelf actuators and multistage transmissions that generally involve three to six stages. This current practice has certain benefits such as short development time due to the availability of mechanical components. However, it lacks a system-level integration that accounts for the actuator structure, size and output force, transmission structure, gear-ratio, and strength, and often leads to long and bulky assemblies with large number of parts. This paper presents a new robotic hardware that integrates the robot's JDS into one compact device that is optimized for its size and maximum torque density. This is done by designing the robotic joint using a special transmission which, when numerically optimized, can produce unlimited gear-ratios using only two stages. The design is computerized to obtain all the solutions that satisfy its kinematic relationships within a given actuator diameter. Compared to existing robotic actuators, the proposed design could lead to shorter assemblies with significantly lower number of parts for the same output torque. The theoretical results demonstrates the potential of an example device, for which a proof-of-concept plastic mockup was fabricated, that could deliver more than 200 N·m of torque in a package as small as a human elbow joint. The proposed technology could have strong technological implications in other industries such as powered prosthetics and rehabilitation equipment.
- 6 September 2017
- Published by ASME International in Journal of Mechanisms and Robotics
- Vol. 9 (6)
Open AccessDesign and Development of a Compact High-Torque Robotic Actuator for Space Mechanisms
Space robots require compact joint drive systems (JDSs), typically comprising of actuator, transmission, joint elements that can deliver high torques through stiff mechanical ports. Today's conventional space drive systems are made from off-the-shelf actuators and multistage transmissions that generally involve three to six stages. This current practice has certain benefits such as short development time due to the availability of mechanical components. However, it lacks a system-level integration that accounts for the actuator structure, size and output force, transmission structure, gear-ratio, and strength, and often leads to long and bulky assemblies with large number of parts. This paper presents a new robotic hardware that integrates the robot's JDS into one compact device that is optimized for its size and maximum torque density. This is done by designing the robotic joint using a special transmission which, when numerically optimized, can produce unlimited gear-ratios using only two stages. The design is computerized to obtain all the solutions that satisfy its kinematic relationships within a given actuator diameter. Compared to existing robotic actuators, the proposed design could lead to shorter assemblies with significantly lower number of parts for the same output torque. The theoretical results demonstrates the potential of an example device, for which a proof-of-concept plastic mockup was fabricated, that could deliver more than 200 N·m of torque in a package as small as a human elbow joint. The proposed technology could have strong technological implications in other industries such as powered prosthetics and rehabilitation equipment.
- 1 January 2013
- Published by Springer Nature
- p. 159-175
Kinematics Analysis and Design Considerations of the Gear Bearing Drive
- 1 January 2013
- Published by Springer Nature
- p. 159-175
Kinematics Analysis and Design Considerations of the Gear Bearing Drive