Mehmet Bahadır Çetinkaya
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mehmet Bahadır Çetinkaya has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Murat Gürek
Erciyes University
4 shared publications - Muhammed İşci
Mechatronics Program, Department of Machine and Metal Technologies, Technical Sciences Vocational School, Kayseri University, Kayseri 38280, Turkey
3 shared publications - Hakan Duran
Department of Mechatronics Engineering, Erciyes University, Kayseri, Türkiye
2 shared publications - Nurhan Karaboga
Erciyes University
2 shared publications Emir Esim
Department of Mechatronics Engineering, Faculty of Engineering, University of Erciyes, Melikgazi, Kayseri, Turkey
1 shared publicationHakan Duran
Department of Mechatronics Engineering , Faculty of Engineering, University of Erciyes , Melikgazi , Kayseri , Turkey
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Tech Science Press in Journal on Artificial Intelligence
- Vol. 8 (1) , 89-106
A Novel Math-Inspired Metaheuristic Algorithm for Retinal Vessel Segmentation: Quadratic Interpolation Optimization (QIO) Algorithm
Math-inspired metaheuristic algorithms stand out with their simple algorithm structures and the inclusion of fewer control parameters. In this study, the recently proposed math-inspired Quadratic Interpolation Optimization (QIO) algorithm was improved as a clustering-based algorithm and then applied to retinal vessel segmentation. Afterwards, its performance was compared with the math-inspired Sine Cosine Algorithm (SCA) and Arithmetic Optimization Algorithm (AOA), which have been frequently applied to engineering problems. First, the performance of the QIO algorithm was analyzed in terms of sensitivity (Se), specificity (Sp), accuracy (Acc), and precision (Prec). An average success rate of approximately 70% or higher indicates that the QIO algorithm is able to provide sufficient performance in clustering. Subsequently, detailed convergence analyses were performed in terms of mean squared error (MSE), CPU time, and convergence speed. The results demonstrate that the QIO algorithm reaches low MSE values at early cycles and shorter CPU times. Finally, to compare the statistical performance of the algorithms, analyses were also conducted based on standard deviation and the Wilcoxon Rank-Sum test. The results demonstrated the stability and robustness of the QIO algorithm. Consequently, it can be concluded that the QIO algorithm can be successfully applied to image processing.
- 1 January 2026
- Published by Tech Science Press in Journal on Artificial Intelligence
- Vol. 8 (1) , 89-106
Open AccessA Novel Math-Inspired Metaheuristic Algorithm for Retinal Vessel Segmentation: Quadratic Interpolation Optimization (QIO) Algorithm
Math-inspired metaheuristic algorithms stand out with their simple algorithm structures and the inclusion of fewer control parameters. In this study, the recently proposed math-inspired Quadratic Interpolation Optimization (QIO) algorithm was improved as a clustering-based algorithm and then applied to retinal vessel segmentation. Afterwards, its performance was compared with the math-inspired Sine Cosine Algorithm (SCA) and Arithmetic Optimization Algorithm (AOA), which have been frequently applied to engineering problems. First, the performance of the QIO algorithm was analyzed in terms of sensitivity (Se), specificity (Sp), accuracy (Acc), and precision (Prec). An average success rate of approximately 70% or higher indicates that the QIO algorithm is able to provide sufficient performance in clustering. Subsequently, detailed convergence analyses were performed in terms of mean squared error (MSE), CPU time, and convergence speed. The results demonstrate that the QIO algorithm reaches low MSE values at early cycles and shorter CPU times. Finally, to compare the statistical performance of the algorithms, analyses were also conducted based on standard deviation and the Wilcoxon Rank-Sum test. The results demonstrated the stability and robustness of the QIO algorithm. Consequently, it can be concluded that the QIO algorithm can be successfully applied to image processing.
- 22 October 2025
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 41 (11) , 7245-7272
Real-time defect detection and classification in energy cable production lines using an improved YOLOv8 algorithm
- 22 October 2025
- Published by Taylor & Francis in Nondestructive Testing and Evaluation
- Vol. 41 (11) , 7245-7272
Real-time defect detection and classification in energy cable production lines using an improved YOLOv8 algorithm
- 15 August 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 7835-7849
Genetic Algorithm-Based Hyperparameter Optimization of YOLOv11: Real-Time Defect Detection and Classification in Energy Cable Production Lines
- 15 August 2025
- Published by Springer Nature in Arabian Journal for Science and Engineering
- Vol. 51 (6) , 7835-7849
Genetic Algorithm-Based Hyperparameter Optimization of YOLOv11: Real-Time Defect Detection and Classification in Energy Cable Production Lines
- Open Access
- 20 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5693
Retinal Vessel Segmentation Using Math-Inspired Metaheuristic Algorithms
Artificial intelligence-based biomedical image processing has become an important area of research in recent decades. In this context, one of the most important problems encountered is the close contrast values between the pixels to be segmented in the image and the remaining pixels. Among the crucial advantages provided by metaheuristic algorithms, they are generally able to provide better performances in the segmentation of biomedical images due to their randomized and gradient-free global search abilities. Math-inspired metaheuristic algorithms can be considered to be one of the most robust groups of algorithms, while also generally presenting non-complex structures. In this work, the recently proposed Circle Search Algorithm (CSA), Tangent Search Algorithm (TSA), Arithmetic Optimization Algorithm (AOA), Generalized Normal Distribution Optimization (GNDO), Global Optimization Method based on Clustering and Parabolic Approximation (GOBC-PA), and Sine Cosine Algorithm (SCA) were implemented for clustering and then applied to the retinal vessel segmentation task on retinal images from the DRIVE and STARE databases. Firstly, the segmentation results of each algorithm were obtained and compared with each other. Then, to compare the statistical performances of the algorithms, analyses were carried out in terms of sensitivity (Se), specificity (Sp), accuracy (Acc), standard deviation, and the Wilcoxon rank-sum test results. Finally, detailed convergence analyses were also carried out in terms of the convergence speed, mean squared error (MSE), CPU time, and number of function evaluations (NFEs) metrics.
- 20 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5693
Open AccessRetinal Vessel Segmentation Using Math-Inspired Metaheuristic Algorithms
Artificial intelligence-based biomedical image processing has become an important area of research in recent decades. In this context, one of the most important problems encountered is the close contrast values between the pixels to be segmented in the image and the remaining pixels. Among the crucial advantages provided by metaheuristic algorithms, they are generally able to provide better performances in the segmentation of biomedical images due to their randomized and gradient-free global search abilities. Math-inspired metaheuristic algorithms can be considered to be one of the most robust groups of algorithms, while also generally presenting non-complex structures. In this work, the recently proposed Circle Search Algorithm (CSA), Tangent Search Algorithm (TSA), Arithmetic Optimization Algorithm (AOA), Generalized Normal Distribution Optimization (GNDO), Global Optimization Method based on Clustering and Parabolic Approximation (GOBC-PA), and Sine Cosine Algorithm (SCA) were implemented for clustering and then applied to the retinal vessel segmentation task on retinal images from the DRIVE and STARE databases. Firstly, the segmentation results of each algorithm were obtained and compared with each other. Then, to compare the statistical performances of the algorithms, analyses were carried out in terms of sensitivity (Se), specificity (Sp), accuracy (Acc), standard deviation, and the Wilcoxon rank-sum test results. Finally, detailed convergence analyses were also carried out in terms of the convergence speed, mean squared error (MSE), CPU time, and number of function evaluations (NFEs) metrics.
- Open Access
- 1 January 2025
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 9 (2) , 89-95
Prototype line design for real-time detection of surface defects occurring on power cables
The optimization of quality control processes in real-time industrial systems is crucial for production efficiency. After obtaining the instantaneous data from the production line, the recording, transmitting and reporting of the relevant data with high accuracy will provide significant advantages in terms of efficiency and product quality. In this study, a prototype line including rotating reel system was designed for the real-time detection of defects that may occur on power cable surfaces during the production process. The prototype line was designed so as to operate in the speed range of [0, 1 m/s] and different defect types occurring on the cable surfaces were detected via a lighted closed camera box located on the prototype line. From the results obtained, it was observed that real-time datasets could be created with high accuracy and diversity through the prototype line developed and the datasets created could successfully be used in the modelling of industrial systems.
- 1 January 2025
- Published by International Advanced Researches and Engineering Journal in International Advanced Researches and Engineering Journal
- Vol. 9 (2) , 89-95
Open AccessPrototype line design for real-time detection of surface defects occurring on power cables
The optimization of quality control processes in real-time industrial systems is crucial for production efficiency. After obtaining the instantaneous data from the production line, the recording, transmitting and reporting of the relevant data with high accuracy will provide significant advantages in terms of efficiency and product quality. In this study, a prototype line including rotating reel system was designed for the real-time detection of defects that may occur on power cable surfaces during the production process. The prototype line was designed so as to operate in the speed range of [0, 1 m/s] and different defect types occurring on the cable surfaces were detected via a lighted closed camera box located on the prototype line. From the results obtained, it was observed that real-time datasets could be created with high accuracy and diversity through the prototype line developed and the datasets created could successfully be used in the modelling of industrial systems.
- Open Access
Trajectory Analysis of 6-DOF Industrial Robot Manipulators by Using Artificial Neural Networks
Robot manipulators are robotic systems that are frequently used in automation systems and able to provide increased speed, precision, and efficiency in the industrial applications. Due to their nonlinear and complex nature, it is crucial to optimize the robot manipulator systems in terms of trajectory control. In this study, positioning analyses based on artificial neural networks (ANNs) were performed for robot manipulator systems used in the textile industry, and the optimal ANN model for the high-accuracy positioning was improved. The inverse kinematic analyses of a 6-degree-of-freedom (DOF) industrial denim robot manipulator were carried out via four different learning algorithms, delta-bar-delta (DBD), online back propagation (OBP), quick back propagation (QBP), and random back propagation (RBP), for the proposed neural network predictor. From the results obtained, it was observed that the QBP-based 3-10-6 type ANN structure produced the optimal results in terms of estimation and modeling of trajectory control. In addition, the 3-5-6 type ANN structure was also improved, and its root mean square error (RMSE) and statistical R2 performances were compared with that of the 3-10-6 ANN structure. Consequently, it can be concluded that the proposed neural predictors can successfully be employed in real-time industrial applications for robot manipulator trajectory analysis.
Open AccessTrajectory Analysis of 6-DOF Industrial Robot Manipulators by Using Artificial Neural Networks
Robot manipulators are robotic systems that are frequently used in automation systems and able to provide increased speed, precision, and efficiency in the industrial applications. Due to their nonlinear and complex nature, it is crucial to optimize the robot manipulator systems in terms of trajectory control. In this study, positioning analyses based on artificial neural networks (ANNs) were performed for robot manipulator systems used in the textile industry, and the optimal ANN model for the high-accuracy positioning was improved. The inverse kinematic analyses of a 6-degree-of-freedom (DOF) industrial denim robot manipulator were carried out via four different learning algorithms, delta-bar-delta (DBD), online back propagation (OBP), quick back propagation (QBP), and random back propagation (RBP), for the proposed neural network predictor. From the results obtained, it was observed that the QBP-based 3-10-6 type ANN structure produced the optimal results in terms of estimation and modeling of trajectory control. In addition, the 3-5-6 type ANN structure was also improved, and its root mean square error (RMSE) and statistical R2 performances were compared with that of the 3-10-6 ANN structure. Consequently, it can be concluded that the proposed neural predictors can successfully be employed in real-time industrial applications for robot manipulator trajectory analysis.
- 30 June 2024
- Published by Cumhuriyet University in Sivas Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 2 (1) , 25-28
Deep Learning based Image Recognition for Separation of Recycling Waste
Recycling waste sorting with high accuracy has become a significant area of research in recent years due to its direct effect on environment and economy. Computer-aided approaches are able to provide effective performances in recycling processes which consist of big data sizes. In this work, a deep learning (DL) based image analysis approach has been improved by using Python programming language and the YOLOv8x DL algorithm to optimize the recycling processes. From the simulation results, it can be concluded that DL-based approaches are able to provide high accuracy in image recognition and can successfully be used in processing of big data sets.
- 30 June 2024
- Published by Cumhuriyet University in Sivas Cumhuriyet Üniversitesi Mühendislik Fakültesi Dergisi
- Vol. 2 (1) , 25-28
Deep Learning based Image Recognition for Separation of Recycling Waste
Recycling waste sorting with high accuracy has become a significant area of research in recent years due to its direct effect on environment and economy. Computer-aided approaches are able to provide effective performances in recycling processes which consist of big data sizes. In this work, a deep learning (DL) based image analysis approach has been improved by using Python programming language and the YOLOv8x DL algorithm to optimize the recycling processes. From the simulation results, it can be concluded that DL-based approaches are able to provide high accuracy in image recognition and can successfully be used in processing of big data sets.
- Open Access
- 23 January 2024
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 26 (76) , 59-68
Radyal Tabanlı Yapay Sinir Ağları Kullanılarak Yaprak Yay Sistemi Titreşim Karakteristiğinin Modellenmesi
Bu çalışmada, yaprak yay sistemleri üzerinde oluşan ivme etkilerini modellemek amacıyla Radyal Tabanlı Yapay Sinir Ağı (RTYSA) yapısı önerilmiştir. Deneysel çalışmalarda, bir hidrolik piston tarafından çelik yaprak yay sistemine 4 ve 22 saniyelik sürelerde 25, 31.25, 37.5, 43.75 ve 50 bar basınç değerleri uygulanmış ve ardından oluşan ivme etkileri tek eksenli ivme sensörü kullanılarak ölçülmüştür. Deneysel sonuçlardan, yüksek basınç değerlerinde ivme genliklerinin arttığı gözlemlenmiştir. Deneysel çalışmalardan sonra, yaprak yay sisteminden ilgili çalışma şartları altında ölçülen ivme verileri yayılma sabiti 0.5 ve 1.0 olan RTYSA yapıları ile analiz edilmiştir. Simülasyon sonuçlarından, 0.5 yayılma sabitine sahip RTYSA yapısının yaprak yay sisteminde meydana gelen gerçek zamanlı ivme değerlerini daha yüksek doğrulukla tahmin edebildiği gözlemlenmiştir. Sonuç olarak, önerilen RTYSA yapısı ile bir yaprak yay sisteminde meydana gelen gerçek zamanlı ivme etkilerinin başarılı bir şekilde tahmin edilebildiği görülmüştür.
- 23 January 2024
- Published by Deu Muhendislik Fakultesi Fen ve Muhendislik in Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi
- Vol. 26 (76) , 59-68
Open AccessRadyal Tabanlı Yapay Sinir Ağları Kullanılarak Yaprak Yay Sistemi Titreşim Karakteristiğinin Modellenmesi
Bu çalışmada, yaprak yay sistemleri üzerinde oluşan ivme etkilerini modellemek amacıyla Radyal Tabanlı Yapay Sinir Ağı (RTYSA) yapısı önerilmiştir. Deneysel çalışmalarda, bir hidrolik piston tarafından çelik yaprak yay sistemine 4 ve 22 saniyelik sürelerde 25, 31.25, 37.5, 43.75 ve 50 bar basınç değerleri uygulanmış ve ardından oluşan ivme etkileri tek eksenli ivme sensörü kullanılarak ölçülmüştür. Deneysel sonuçlardan, yüksek basınç değerlerinde ivme genliklerinin arttığı gözlemlenmiştir. Deneysel çalışmalardan sonra, yaprak yay sisteminden ilgili çalışma şartları altında ölçülen ivme verileri yayılma sabiti 0.5 ve 1.0 olan RTYSA yapıları ile analiz edilmiştir. Simülasyon sonuçlarından, 0.5 yayılma sabitine sahip RTYSA yapısının yaprak yay sisteminde meydana gelen gerçek zamanlı ivme değerlerini daha yüksek doğrulukla tahmin edebildiği gözlemlenmiştir. Sonuç olarak, önerilen RTYSA yapısı ile bir yaprak yay sisteminde meydana gelen gerçek zamanlı ivme etkilerinin başarılı bir şekilde tahmin edilebildiği görülmüştür.
- 27 December 2023
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Aynı anma gerilimlerine sahip farklı iletkenlerden oluşan yüksek gerilim kabloları üzerine bir araştırma
Aluminum and copper conductors are commonly used in the transport of energy. In this work, high-voltage cables occurring aluminum and copper conductors exposed to the same rated voltage values were analyzed. In order to obtain the same current carrying capacity for copper and aluminum conductors, the relationship between the cross-sections has been determined and then the most appropriate cross-sectional values for each conductor were identified. Three different cross-sectional values have been selected for each conductor type and the calculations for the cables were carried out by using the Cable Ampacity Calculations Program (CYMCAP) within the framework of the International Electrotechnical Commission (IEC) standards. The performance of the cables has been compared in terms of material losses, cable structures and the cable costs. It is seen from the simulation results that aluminum conductor cables have lower cost and higher electrical loses than the copper conductor cables.
- 27 December 2023
- Published by Gumushane University Journal of Science and Technology Institute in Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi
Aynı anma gerilimlerine sahip farklı iletkenlerden oluşan yüksek gerilim kabloları üzerine bir araştırma
Aluminum and copper conductors are commonly used in the transport of energy. In this work, high-voltage cables occurring aluminum and copper conductors exposed to the same rated voltage values were analyzed. In order to obtain the same current carrying capacity for copper and aluminum conductors, the relationship between the cross-sections has been determined and then the most appropriate cross-sectional values for each conductor were identified. Three different cross-sectional values have been selected for each conductor type and the calculations for the cables were carried out by using the Cable Ampacity Calculations Program (CYMCAP) within the framework of the International Electrotechnical Commission (IEC) standards. The performance of the cables has been compared in terms of material losses, cable structures and the cable costs. It is seen from the simulation results that aluminum conductor cables have lower cost and higher electrical loses than the copper conductor cables.
- Open Access
Analysis of the Vibration Characteristics of a Leaf Spring System Using Artificial Neural Networks
The real-time vibrations occurring in a leaf spring system may cause undesirable effects, such as stresses, strains, deflections, and surface deformations over the system. In order to detect the most appropriate working conditions in which the leaf spring system will work more stably and also to design optimized leaf spring systems, these external effects have to be detected with high accuracy. In this work, artificial neural network-based estimators have been proposed to analyze the vibration effects on leaf spring systems. In the experimental studies carried out, the vibration effects of low, medium, and high-pressure values applied by a hydraulic piston on a steel leaf spring system have been analyzed by a 3-axial accelerometer. After the experimental studies, the Radial Basis Artificial Neural Network (RBANN) and Cascade-Forward Back-Propagation Artificial Neural Network (CFBANN) based nonlinear artificial neural network structures have been proposed to analyze the vibration data measured from the leaf spring system under relevant working conditions. The simulation results represent that the RBANN structure can estimate the real-time vibrations occurring on the leaf spring system with higher accuracy and reaches lower RMS error values when compared to the CFBANN structure. In general, it can be concluded that the RBANN and CFBANN network structures can successfully be used in the estimation of real-time vibration data.
Open AccessAnalysis of the Vibration Characteristics of a Leaf Spring System Using Artificial Neural Networks
The real-time vibrations occurring in a leaf spring system may cause undesirable effects, such as stresses, strains, deflections, and surface deformations over the system. In order to detect the most appropriate working conditions in which the leaf spring system will work more stably and also to design optimized leaf spring systems, these external effects have to be detected with high accuracy. In this work, artificial neural network-based estimators have been proposed to analyze the vibration effects on leaf spring systems. In the experimental studies carried out, the vibration effects of low, medium, and high-pressure values applied by a hydraulic piston on a steel leaf spring system have been analyzed by a 3-axial accelerometer. After the experimental studies, the Radial Basis Artificial Neural Network (RBANN) and Cascade-Forward Back-Propagation Artificial Neural Network (CFBANN) based nonlinear artificial neural network structures have been proposed to analyze the vibration data measured from the leaf spring system under relevant working conditions. The simulation results represent that the RBANN structure can estimate the real-time vibrations occurring on the leaf spring system with higher accuracy and reaches lower RMS error values when compared to the CFBANN structure. In general, it can be concluded that the RBANN and CFBANN network structures can successfully be used in the estimation of real-time vibration data.